1 <?xml version="1.0" encoding="UTF-8"?>
2 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
3 "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
5 <book id="MTD-NAND-Guide">
7 <title>MTD NAND Driver Programming Interface</title>
11 <firstname>Thomas</firstname>
12 <surname>Gleixner</surname>
15 <email>tglx@linutronix.de</email>
23 <holder>Thomas Gleixner</holder>
28 This documentation is free software; you can redistribute
29 it and/or modify it under the terms of the GNU General Public
30 License version 2 as published by the Free Software Foundation.
34 This program is distributed in the hope that it will be
35 useful, but WITHOUT ANY WARRANTY; without even the implied
36 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
37 See the GNU General Public License for more details.
41 You should have received a copy of the GNU General Public
42 License along with this program; if not, write to the Free
43 Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
48 For more details see the file COPYING in the source
49 distribution of Linux.
57 <title>Introduction</title>
59 The generic NAND driver supports almost all NAND and AG-AND based
60 chips and connects them to the Memory Technology Devices (MTD)
61 subsystem of the Linux Kernel.
64 This documentation is provided for developers who want to implement
65 board drivers or filesystem drivers suitable for NAND devices.
70 <title>Known Bugs And Assumptions</title>
76 <chapter id="dochints">
77 <title>Documentation hints</title>
79 The function and structure docs are autogenerated. Each function and
80 struct member has a short description which is marked with an [XXX] identifier.
81 The following chapters explain the meaning of those identifiers.
83 <sect1 id="Function_identifiers_XXX">
84 <title>Function identifiers [XXX]</title>
86 The functions are marked with [XXX] identifiers in the short
87 comment. The identifiers explain the usage and scope of the
88 functions. Following identifiers are used:
92 [MTD Interface]</para><para>
93 These functions provide the interface to the MTD kernel API.
94 They are not replacable and provide functionality
95 which is complete hardware independent.
98 [NAND Interface]</para><para>
99 These functions are exported and provide the interface to the NAND kernel API.
102 [GENERIC]</para><para>
103 Generic functions are not replacable and provide functionality
104 which is complete hardware independent.
107 [DEFAULT]</para><para>
108 Default functions provide hardware related functionality which is suitable
109 for most of the implementations. These functions can be replaced by the
110 board driver if neccecary. Those functions are called via pointers in the
111 NAND chip description structure. The board driver can set the functions which
112 should be replaced by board dependent functions before calling nand_scan().
113 If the function pointer is NULL on entry to nand_scan() then the pointer
114 is set to the default function which is suitable for the detected chip type.
118 <sect1 id="Struct_member_identifiers_XXX">
119 <title>Struct member identifiers [XXX]</title>
121 The struct members are marked with [XXX] identifiers in the
122 comment. The identifiers explain the usage and scope of the
123 members. Following identifiers are used:
127 [INTERN]</para><para>
128 These members are for NAND driver internal use only and must not be
129 modified. Most of these values are calculated from the chip geometry
130 information which is evaluated during nand_scan().
133 [REPLACEABLE]</para><para>
134 Replaceable members hold hardware related functions which can be
135 provided by the board driver. The board driver can set the functions which
136 should be replaced by board dependent functions before calling nand_scan().
137 If the function pointer is NULL on entry to nand_scan() then the pointer
138 is set to the default function which is suitable for the detected chip type.
141 [BOARDSPECIFIC]</para><para>
142 Board specific members hold hardware related information which must
143 be provided by the board driver. The board driver must set the function
144 pointers and datafields before calling nand_scan().
147 [OPTIONAL]</para><para>
148 Optional members can hold information relevant for the board driver. The
149 generic NAND driver code does not use this information.
155 <chapter id="basicboarddriver">
156 <title>Basic board driver</title>
158 For most boards it will be sufficient to provide just the
159 basic functions and fill out some really board dependent
160 members in the nand chip description structure.
162 <sect1 id="Basic_defines">
163 <title>Basic defines</title>
165 At least you have to provide a mtd structure and
166 a storage for the ioremap'ed chip address.
167 You can allocate the mtd structure using kmalloc
168 or you can allocate it statically.
169 In case of static allocation you have to allocate
170 a nand_chip structure too.
173 Kmalloc based example
176 static struct mtd_info *board_mtd;
177 static void __iomem *baseaddr;
183 static struct mtd_info board_mtd;
184 static struct nand_chip board_chip;
185 static void __iomem *baseaddr;
188 <sect1 id="Partition_defines">
189 <title>Partition defines</title>
191 If you want to divide your device into partitions, then
192 define a partitioning scheme suitable to your board.
195 #define NUM_PARTITIONS 2
196 static struct mtd_partition partition_info[] = {
197 { .name = "Flash partition 1",
199 .size = 8 * 1024 * 1024 },
200 { .name = "Flash partition 2",
201 .offset = MTDPART_OFS_NEXT,
202 .size = MTDPART_SIZ_FULL },
206 <sect1 id="Hardware_control_functions">
207 <title>Hardware control function</title>
209 The hardware control function provides access to the
210 control pins of the NAND chip(s).
211 The access can be done by GPIO pins or by address lines.
212 If you use address lines, make sure that the timing
213 requirements are met.
216 <emphasis>GPIO based example</emphasis>
219 static void board_hwcontrol(struct mtd_info *mtd, int cmd)
222 case NAND_CTL_SETCLE: /* Set CLE pin high */ break;
223 case NAND_CTL_CLRCLE: /* Set CLE pin low */ break;
224 case NAND_CTL_SETALE: /* Set ALE pin high */ break;
225 case NAND_CTL_CLRALE: /* Set ALE pin low */ break;
226 case NAND_CTL_SETNCE: /* Set nCE pin low */ break;
227 case NAND_CTL_CLRNCE: /* Set nCE pin high */ break;
232 <emphasis>Address lines based example.</emphasis> It's assumed that the
233 nCE pin is driven by a chip select decoder.
236 static void board_hwcontrol(struct mtd_info *mtd, int cmd)
238 struct nand_chip *this = (struct nand_chip *) mtd->priv;
240 case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break;
241 case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break;
242 case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT; break;
243 case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break;
248 <sect1 id="Device_ready_function">
249 <title>Device ready function</title>
251 If the hardware interface has the ready busy pin of the NAND chip connected to a
252 GPIO or other accessible I/O pin, this function is used to read back the state of the
253 pin. The function has no arguments and should return 0, if the device is busy (R/B pin
254 is low) and 1, if the device is ready (R/B pin is high).
255 If the hardware interface does not give access to the ready busy pin, then
256 the function must not be defined and the function pointer this->dev_ready is set to NULL.
259 <sect1 id="Init_function">
260 <title>Init function</title>
262 The init function allocates memory and sets up all the board
263 specific parameters and function pointers. When everything
264 is set up nand_scan() is called. This function tries to
265 detect and identify then chip. If a chip is found all the
266 internal data fields are initialized accordingly.
267 The structure(s) have to be zeroed out first and then filled with the neccecary
268 information about the device.
271 static int __init board_init (void)
273 struct nand_chip *this;
276 /* Allocate memory for MTD device structure and private data */
277 board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
279 printk ("Unable to allocate NAND MTD device structure.\n");
284 /* map physical address */
285 baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
287 printk("Ioremap to access NAND chip failed\n");
292 /* Get pointer to private data */
293 this = (struct nand_chip *) ();
294 /* Link the private data with the MTD structure */
295 board_mtd->priv = this;
297 /* Set address of NAND IO lines */
298 this->IO_ADDR_R = baseaddr;
299 this->IO_ADDR_W = baseaddr;
300 /* Reference hardware control function */
301 this->hwcontrol = board_hwcontrol;
302 /* Set command delay time, see datasheet for correct value */
303 this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
304 /* Assign the device ready function, if available */
305 this->dev_ready = board_dev_ready;
306 this->eccmode = NAND_ECC_SOFT;
308 /* Scan to find existence of the device */
309 if (nand_scan (board_mtd, 1)) {
314 add_mtd_partitions(board_mtd, partition_info, NUM_PARTITIONS);
324 module_init(board_init);
327 <sect1 id="Exit_function">
328 <title>Exit function</title>
330 The exit function is only neccecary if the driver is
331 compiled as a module. It releases all resources which
332 are held by the chip driver and unregisters the partitions
337 static void __exit board_cleanup (void)
339 /* Release resources, unregister device */
340 nand_release (board_mtd);
342 /* unmap physical address */
345 /* Free the MTD device structure */
348 module_exit(board_cleanup);
354 <chapter id="boarddriversadvanced">
355 <title>Advanced board driver functions</title>
357 This chapter describes the advanced functionality of the NAND
358 driver. For a list of functions which can be overridden by the board
359 driver see the documentation of the nand_chip structure.
361 <sect1 id="Multiple_chip_control">
362 <title>Multiple chip control</title>
364 The nand driver can control chip arrays. Therefore the
365 board driver must provide an own select_chip function. This
366 function must (de)select the requested chip.
367 The function pointer in the nand_chip structure must
368 be set before calling nand_scan(). The maxchip parameter
369 of nand_scan() defines the maximum number of chips to
370 scan for. Make sure that the select_chip function can
371 handle the requested number of chips.
374 The nand driver concatenates the chips to one virtual
375 chip and provides this virtual chip to the MTD layer.
378 <emphasis>Note: The driver can only handle linear chip arrays
379 of equally sized chips. There is no support for
380 parallel arrays which extend the buswidth.</emphasis>
383 <emphasis>GPIO based example</emphasis>
386 static void board_select_chip (struct mtd_info *mtd, int chip)
388 /* Deselect all chips, set all nCE pins high */
389 GPIO(BOARD_NAND_NCE) |= 0xff;
391 GPIO(BOARD_NAND_NCE) &= ~ (1 << chip);
395 <emphasis>Address lines based example.</emphasis>
396 Its assumed that the nCE pins are connected to an
400 static void board_select_chip (struct mtd_info *mtd, int chip)
402 struct nand_chip *this = (struct nand_chip *) mtd->priv;
404 /* Deselect all chips */
405 this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
406 this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
409 this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
410 this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
414 this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
415 this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
421 <sect1 id="Hardware_ECC_support">
422 <title>Hardware ECC support</title>
423 <sect2 id="Functions_and_constants">
424 <title>Functions and constants</title>
426 The nand driver supports three different types of
429 <listitem><para>NAND_ECC_HW3_256</para><para>
430 Hardware ECC generator providing 3 bytes ECC per
433 <listitem><para>NAND_ECC_HW3_512</para><para>
434 Hardware ECC generator providing 3 bytes ECC per
437 <listitem><para>NAND_ECC_HW6_512</para><para>
438 Hardware ECC generator providing 6 bytes ECC per
441 <listitem><para>NAND_ECC_HW8_512</para><para>
442 Hardware ECC generator providing 6 bytes ECC per
446 If your hardware generator has a different functionality
447 add it at the appropriate place in nand_base.c
450 The board driver must provide following functions:
452 <listitem><para>enable_hwecc</para><para>
453 This function is called before reading / writing to
454 the chip. Reset or initialize the hardware generator
455 in this function. The function is called with an
456 argument which let you distinguish between read
457 and write operations.
459 <listitem><para>calculate_ecc</para><para>
460 This function is called after read / write from / to
461 the chip. Transfer the ECC from the hardware to
462 the buffer. If the option NAND_HWECC_SYNDROME is set
463 then the function is only called on write. See below.
465 <listitem><para>correct_data</para><para>
466 In case of an ECC error this function is called for
467 error detection and correction. Return 1 respectively 2
468 in case the error can be corrected. If the error is
469 not correctable return -1. If your hardware generator
470 matches the default algorithm of the nand_ecc software
471 generator then use the correction function provided
472 by nand_ecc instead of implementing duplicated code.
477 <sect2 id="Hardware_ECC_with_syndrome_calculation">
478 <title>Hardware ECC with syndrome calculation</title>
480 Many hardware ECC implementations provide Reed-Solomon
481 codes and calculate an error syndrome on read. The syndrome
482 must be converted to a standard Reed-Solomon syndrome
483 before calling the error correction code in the generic
484 Reed-Solomon library.
487 The ECC bytes must be placed immediately after the data
488 bytes in order to make the syndrome generator work. This
489 is contrary to the usual layout used by software ECC. The
490 separation of data and out of band area is not longer
491 possible. The nand driver code handles this layout and
492 the remaining free bytes in the oob area are managed by
493 the autoplacement code. Provide a matching oob-layout
494 in this case. See rts_from4.c and diskonchip.c for
495 implementation reference. In those cases we must also
496 use bad block tables on FLASH, because the ECC layout is
497 interferring with the bad block marker positions.
498 See bad block table support for details.
502 <sect1 id="Bad_Block_table_support">
503 <title>Bad block table support</title>
505 Most NAND chips mark the bad blocks at a defined
506 position in the spare area. Those blocks must
507 not be erased under any circumstances as the bad
508 block information would be lost.
509 It is possible to check the bad block mark each
510 time when the blocks are accessed by reading the
511 spare area of the first page in the block. This
512 is time consuming so a bad block table is used.
515 The nand driver supports various types of bad block
518 <listitem><para>Per device</para><para>
519 The bad block table contains all bad block information
520 of the device which can consist of multiple chips.
522 <listitem><para>Per chip</para><para>
523 A bad block table is used per chip and contains the
524 bad block information for this particular chip.
526 <listitem><para>Fixed offset</para><para>
527 The bad block table is located at a fixed offset
528 in the chip (device). This applies to various
531 <listitem><para>Automatic placed</para><para>
532 The bad block table is automatically placed and
533 detected either at the end or at the beginning
536 <listitem><para>Mirrored tables</para><para>
537 The bad block table is mirrored on the chip (device) to
538 allow updates of the bad block table without data loss.
543 nand_scan() calls the function nand_default_bbt().
544 nand_default_bbt() selects appropriate default
545 bad block table desriptors depending on the chip information
546 which was retrieved by nand_scan().
549 The standard policy is scanning the device for bad
550 blocks and build a ram based bad block table which
551 allows faster access than always checking the
552 bad block information on the flash chip itself.
554 <sect2 id="Flash_based_tables">
555 <title>Flash based tables</title>
557 It may be desired or neccecary to keep a bad block table in FLASH.
558 For AG-AND chips this is mandatory, as they have no factory marked
559 bad blocks. They have factory marked good blocks. The marker pattern
560 is erased when the block is erased to be reused. So in case of
561 powerloss before writing the pattern back to the chip this block
562 would be lost and added to the bad blocks. Therefore we scan the
563 chip(s) when we detect them the first time for good blocks and
564 store this information in a bad block table before erasing any
568 The blocks in which the tables are stored are procteted against
569 accidental access by marking them bad in the memory bad block
570 table. The bad block table management functions are allowed
571 to circumvernt this protection.
574 The simplest way to activate the FLASH based bad block table support
575 is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
576 the nand chip structure before calling nand_scan(). For AG-AND
577 chips is this done by default.
578 This activates the default FLASH based bad block table functionality
579 of the NAND driver. The default bad block table options are
581 <listitem><para>Store bad block table per chip</para></listitem>
582 <listitem><para>Use 2 bits per block</para></listitem>
583 <listitem><para>Automatic placement at the end of the chip</para></listitem>
584 <listitem><para>Use mirrored tables with version numbers</para></listitem>
585 <listitem><para>Reserve 4 blocks at the end of the chip</para></listitem>
589 <sect2 id="User_defined_tables">
590 <title>User defined tables</title>
592 User defined tables are created by filling out a
593 nand_bbt_descr structure and storing the pointer in the
594 nand_chip structure member bbt_td before calling nand_scan().
595 If a mirror table is neccecary a second structure must be
596 created and a pointer to this structure must be stored
597 in bbt_md inside the nand_chip structure. If the bbt_md
598 member is set to NULL then only the main table is used
599 and no scan for the mirrored table is performed.
602 The most important field in the nand_bbt_descr structure
603 is the options field. The options define most of the
604 table properties. Use the predefined constants from
605 nand.h to define the options.
607 <listitem><para>Number of bits per block</para>
608 <para>The supported number of bits is 1, 2, 4, 8.</para></listitem>
609 <listitem><para>Table per chip</para>
610 <para>Setting the constant NAND_BBT_PERCHIP selects that
611 a bad block table is managed for each chip in a chip array.
612 If this option is not set then a per device bad block table
613 is used.</para></listitem>
614 <listitem><para>Table location is absolute</para>
615 <para>Use the option constant NAND_BBT_ABSPAGE and
616 define the absolute page number where the bad block
617 table starts in the field pages. If you have selected bad block
618 tables per chip and you have a multi chip array then the start page
619 must be given for each chip in the chip array. Note: there is no scan
620 for a table ident pattern performed, so the fields
621 pattern, veroffs, offs, len can be left uninitialized</para></listitem>
622 <listitem><para>Table location is automatically detected</para>
623 <para>The table can either be located in the first or the last good
624 blocks of the chip (device). Set NAND_BBT_LASTBLOCK to place
625 the bad block table at the end of the chip (device). The
626 bad block tables are marked and identified by a pattern which
627 is stored in the spare area of the first page in the block which
628 holds the bad block table. Store a pointer to the pattern
629 in the pattern field. Further the length of the pattern has to be
630 stored in len and the offset in the spare area must be given
631 in the offs member of the nand_bbt_descr structure. For mirrored
632 bad block tables different patterns are mandatory.</para></listitem>
633 <listitem><para>Table creation</para>
634 <para>Set the option NAND_BBT_CREATE to enable the table creation
635 if no table can be found during the scan. Usually this is done only
636 once if a new chip is found. </para></listitem>
637 <listitem><para>Table write support</para>
638 <para>Set the option NAND_BBT_WRITE to enable the table write support.
639 This allows the update of the bad block table(s) in case a block has
640 to be marked bad due to wear. The MTD interface function block_markbad
641 is calling the update function of the bad block table. If the write
642 support is enabled then the table is updated on FLASH.</para>
644 Note: Write support should only be enabled for mirrored tables with
647 <listitem><para>Table version control</para>
648 <para>Set the option NAND_BBT_VERSION to enable the table version control.
649 It's highly recommended to enable this for mirrored tables with write
650 support. It makes sure that the risk of losing the bad block
651 table information is reduced to the loss of the information about the
652 one worn out block which should be marked bad. The version is stored in
653 4 consecutive bytes in the spare area of the device. The position of
654 the version number is defined by the member veroffs in the bad block table
655 descriptor.</para></listitem>
656 <listitem><para>Save block contents on write</para>
658 In case that the block which holds the bad block table does contain
659 other useful information, set the option NAND_BBT_SAVECONTENT. When
660 the bad block table is written then the whole block is read the bad
661 block table is updated and the block is erased and everything is
662 written back. If this option is not set only the bad block table
663 is written and everything else in the block is ignored and erased.
665 <listitem><para>Number of reserved blocks</para>
667 For automatic placement some blocks must be reserved for
668 bad block table storage. The number of reserved blocks is defined
669 in the maxblocks member of the babd block table description structure.
670 Reserving 4 blocks for mirrored tables should be a reasonable number.
671 This also limits the number of blocks which are scanned for the bad
672 block table ident pattern.
678 <sect1 id="Spare_area_placement">
679 <title>Spare area (auto)placement</title>
681 The nand driver implements different possibilities for
682 placement of filesystem data in the spare area,
684 <listitem><para>Placement defined by fs driver</para></listitem>
685 <listitem><para>Automatic placement</para></listitem>
687 The default placement function is automatic placement. The
688 nand driver has built in default placement schemes for the
689 various chiptypes. If due to hardware ECC functionality the
690 default placement does not fit then the board driver can
691 provide a own placement scheme.
694 File system drivers can provide a own placement scheme which
695 is used instead of the default placement scheme.
698 Placement schemes are defined by a nand_oobinfo structure
700 struct nand_oobinfo {
708 <listitem><para>useecc</para><para>
709 The useecc member controls the ecc and placement function. The header
710 file include/mtd/mtd-abi.h contains constants to select ecc and
711 placement. MTD_NANDECC_OFF switches off the ecc complete. This is
712 not recommended and available for testing and diagnosis only.
713 MTD_NANDECC_PLACE selects caller defined placement, MTD_NANDECC_AUTOPLACE
714 selects automatic placement.
716 <listitem><para>eccbytes</para><para>
717 The eccbytes member defines the number of ecc bytes per page.
719 <listitem><para>eccpos</para><para>
720 The eccpos array holds the byte offsets in the spare area where
721 the ecc codes are placed.
723 <listitem><para>oobfree</para><para>
724 The oobfree array defines the areas in the spare area which can be
725 used for automatic placement. The information is given in the format
726 {offset, size}. offset defines the start of the usable area, size the
727 length in bytes. More than one area can be defined. The list is terminated
732 <sect2 id="Placement_defined_by_fs_driver">
733 <title>Placement defined by fs driver</title>
735 The calling function provides a pointer to a nand_oobinfo
736 structure which defines the ecc placement. For writes the
737 caller must provide a spare area buffer along with the
738 data buffer. The spare area buffer size is (number of pages) *
739 (size of spare area). For reads the buffer size is
740 (number of pages) * ((size of spare area) + (number of ecc
741 steps per page) * sizeof (int)). The driver stores the
742 result of the ecc check for each tuple in the spare buffer.
743 The storage sequence is
746 <spare data page 0><ecc result 0>...<ecc result n>
752 <spare data page n><ecc result 0>...<ecc result n>
755 This is a legacy mode used by YAFFS1.
758 If the spare area buffer is NULL then only the ECC placement is
759 done according to the given scheme in the nand_oobinfo structure.
762 <sect2 id="Automatic_placement">
763 <title>Automatic placement</title>
765 Automatic placement uses the built in defaults to place the
766 ecc bytes in the spare area. If filesystem data have to be stored /
767 read into the spare area then the calling function must provide a
768 buffer. The buffer size per page is determined by the oobfree array in
769 the nand_oobinfo structure.
772 If the spare area buffer is NULL then only the ECC placement is
773 done according to the default builtin scheme.
776 <sect2 id="User_space_placement_selection">
777 <title>User space placement selection</title>
779 All non ecc functions like mtd->read and mtd->write use an internal
780 structure, which can be set by an ioctl. This structure is preset
781 to the autoplacement default.
783 ioctl (fd, MEMSETOOBSEL, oobsel);
785 oobsel is a pointer to a user supplied structure of type
786 nand_oobconfig. The contents of this structure must match the
787 criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
791 <sect1 id="Spare_area_autoplacement_default">
792 <title>Spare area autoplacement default schemes</title>
793 <sect2 id="pagesize_256">
794 <title>256 byte pagesize</title>
795 <informaltable><tgroup cols="3"><tbody>
797 <entry>Offset</entry>
798 <entry>Content</entry>
799 <entry>Comment</entry>
803 <entry>ECC byte 0</entry>
804 <entry>Error correction code byte 0</entry>
808 <entry>ECC byte 1</entry>
809 <entry>Error correction code byte 1</entry>
813 <entry>ECC byte 2</entry>
814 <entry>Error correction code byte 2</entry>
818 <entry>Autoplace 0</entry>
823 <entry>Autoplace 1</entry>
828 <entry>Bad block marker</entry>
829 <entry>If any bit in this byte is zero, then this block is bad.
830 This applies only to the first page in a block. In the remaining
831 pages this byte is reserved</entry>
835 <entry>Autoplace 2</entry>
840 <entry>Autoplace 3</entry>
843 </tbody></tgroup></informaltable>
845 <sect2 id="pagesize_512">
846 <title>512 byte pagesize</title>
847 <informaltable><tgroup cols="3"><tbody>
849 <entry>Offset</entry>
850 <entry>Content</entry>
851 <entry>Comment</entry>
855 <entry>ECC byte 0</entry>
856 <entry>Error correction code byte 0 of the lower 256 Byte data in
861 <entry>ECC byte 1</entry>
862 <entry>Error correction code byte 1 of the lower 256 Bytes of data
867 <entry>ECC byte 2</entry>
868 <entry>Error correction code byte 2 of the lower 256 Bytes of data
873 <entry>ECC byte 3</entry>
874 <entry>Error correction code byte 0 of the upper 256 Bytes of data
879 <entry>reserved</entry>
880 <entry>reserved</entry>
884 <entry>Bad block marker</entry>
885 <entry>If any bit in this byte is zero, then this block is bad.
886 This applies only to the first page in a block. In the remaining
887 pages this byte is reserved</entry>
891 <entry>ECC byte 4</entry>
892 <entry>Error correction code byte 1 of the upper 256 Bytes of data
897 <entry>ECC byte 5</entry>
898 <entry>Error correction code byte 2 of the upper 256 Bytes of data
902 <entry>0x08 - 0x0F</entry>
903 <entry>Autoplace 0 - 7</entry>
906 </tbody></tgroup></informaltable>
908 <sect2 id="pagesize_2048">
909 <title>2048 byte pagesize</title>
910 <informaltable><tgroup cols="3"><tbody>
912 <entry>Offset</entry>
913 <entry>Content</entry>
914 <entry>Comment</entry>
918 <entry>Bad block marker</entry>
919 <entry>If any bit in this byte is zero, then this block is bad.
920 This applies only to the first page in a block. In the remaining
921 pages this byte is reserved</entry>
925 <entry>Reserved</entry>
926 <entry>Reserved</entry>
929 <entry>0x02-0x27</entry>
930 <entry>Autoplace 0 - 37</entry>
935 <entry>ECC byte 0</entry>
936 <entry>Error correction code byte 0 of the first 256 Byte data in
941 <entry>ECC byte 1</entry>
942 <entry>Error correction code byte 1 of the first 256 Bytes of data
947 <entry>ECC byte 2</entry>
948 <entry>Error correction code byte 2 of the first 256 Bytes data in
953 <entry>ECC byte 3</entry>
954 <entry>Error correction code byte 0 of the second 256 Bytes of data
959 <entry>ECC byte 4</entry>
960 <entry>Error correction code byte 1 of the second 256 Bytes of data
965 <entry>ECC byte 5</entry>
966 <entry>Error correction code byte 2 of the second 256 Bytes of data
971 <entry>ECC byte 6</entry>
972 <entry>Error correction code byte 0 of the third 256 Bytes of data
977 <entry>ECC byte 7</entry>
978 <entry>Error correction code byte 1 of the third 256 Bytes of data
983 <entry>ECC byte 8</entry>
984 <entry>Error correction code byte 2 of the third 256 Bytes of data
989 <entry>ECC byte 9</entry>
990 <entry>Error correction code byte 0 of the fourth 256 Bytes of data
995 <entry>ECC byte 10</entry>
996 <entry>Error correction code byte 1 of the fourth 256 Bytes of data
1001 <entry>ECC byte 11</entry>
1002 <entry>Error correction code byte 2 of the fourth 256 Bytes of data
1003 in this page</entry>
1007 <entry>ECC byte 12</entry>
1008 <entry>Error correction code byte 0 of the fifth 256 Bytes of data
1009 in this page</entry>
1013 <entry>ECC byte 13</entry>
1014 <entry>Error correction code byte 1 of the fifth 256 Bytes of data
1015 in this page</entry>
1019 <entry>ECC byte 14</entry>
1020 <entry>Error correction code byte 2 of the fifth 256 Bytes of data
1021 in this page</entry>
1025 <entry>ECC byte 15</entry>
1026 <entry>Error correction code byte 0 of the sixt 256 Bytes of data
1027 in this page</entry>
1031 <entry>ECC byte 16</entry>
1032 <entry>Error correction code byte 1 of the sixt 256 Bytes of data
1033 in this page</entry>
1037 <entry>ECC byte 17</entry>
1038 <entry>Error correction code byte 2 of the sixt 256 Bytes of data
1039 in this page</entry>
1043 <entry>ECC byte 18</entry>
1044 <entry>Error correction code byte 0 of the seventh 256 Bytes of
1045 data in this page</entry>
1049 <entry>ECC byte 19</entry>
1050 <entry>Error correction code byte 1 of the seventh 256 Bytes of
1051 data in this page</entry>
1055 <entry>ECC byte 20</entry>
1056 <entry>Error correction code byte 2 of the seventh 256 Bytes of
1057 data in this page</entry>
1061 <entry>ECC byte 21</entry>
1062 <entry>Error correction code byte 0 of the eighth 256 Bytes of data
1063 in this page</entry>
1067 <entry>ECC byte 22</entry>
1068 <entry>Error correction code byte 1 of the eighth 256 Bytes of data
1069 in this page</entry>
1073 <entry>ECC byte 23</entry>
1074 <entry>Error correction code byte 2 of the eighth 256 Bytes of data
1075 in this page</entry>
1077 </tbody></tgroup></informaltable>
1082 <chapter id="filesystems">
1083 <title>Filesystem support</title>
1085 The NAND driver provides all neccecary functions for a
1086 filesystem via the MTD interface.
1089 Filesystems must be aware of the NAND pecularities and
1090 restrictions. One major restrictions of NAND Flash is, that you cannot
1091 write as often as you want to a page. The consecutive writes to a page,
1092 before erasing it again, are restricted to 1-3 writes, depending on the
1093 manufacturers specifications. This applies similar to the spare area.
1096 Therefore NAND aware filesystems must either write in page size chunks
1097 or hold a writebuffer to collect smaller writes until they sum up to
1098 pagesize. Available NAND aware filesystems: JFFS2, YAFFS.
1101 The spare area usage to store filesystem data is controlled by
1102 the spare area placement functionality which is described in one
1103 of the earlier chapters.
1106 <chapter id="tools">
1107 <title>Tools</title>
1109 The MTD project provides a couple of helpful tools to handle NAND Flash.
1111 <listitem><para>flasherase, flasheraseall: Erase and format FLASH partitions</para></listitem>
1112 <listitem><para>nandwrite: write filesystem images to NAND FLASH</para></listitem>
1113 <listitem><para>nanddump: dump the contents of a NAND FLASH partitions</para></listitem>
1117 These tools are aware of the NAND restrictions. Please use those tools
1118 instead of complaining about errors which are caused by non NAND aware
1123 <chapter id="defines">
1124 <title>Constants</title>
1126 This chapter describes the constants which might be relevant for a driver developer.
1128 <sect1 id="Chip_option_constants">
1129 <title>Chip option constants</title>
1130 <sect2 id="Constants_for_chip_id_table">
1131 <title>Constants for chip id table</title>
1133 These constants are defined in nand.h. They are ored together to describe
1134 the chip functionality.
1136 /* Chip can not auto increment pages */
1137 #define NAND_NO_AUTOINCR 0x00000001
1138 /* Buswitdh is 16 bit */
1139 #define NAND_BUSWIDTH_16 0x00000002
1140 /* Device supports partial programming without padding */
1141 #define NAND_NO_PADDING 0x00000004
1142 /* Chip has cache program function */
1143 #define NAND_CACHEPRG 0x00000008
1144 /* Chip has copy back function */
1145 #define NAND_COPYBACK 0x00000010
1146 /* AND Chip which has 4 banks and a confusing page / block
1147 * assignment. See Renesas datasheet for further information */
1148 #define NAND_IS_AND 0x00000020
1149 /* Chip has a array of 4 pages which can be read without
1150 * additional ready /busy waits */
1151 #define NAND_4PAGE_ARRAY 0x00000040
1155 <sect2 id="Constants_for_runtime_options">
1156 <title>Constants for runtime options</title>
1158 These constants are defined in nand.h. They are ored together to describe
1161 /* The hw ecc generator provides a syndrome instead a ecc value on read
1162 * This can only work if we have the ecc bytes directly behind the
1163 * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
1164 #define NAND_HWECC_SYNDROME 0x00020000
1170 <sect1 id="EEC_selection_constants">
1171 <title>ECC selection constants</title>
1173 Use these constants to select the ECC algorithm.
1175 /* No ECC. Usage is not recommended ! */
1176 #define NAND_ECC_NONE 0
1177 /* Software ECC 3 byte ECC per 256 Byte data */
1178 #define NAND_ECC_SOFT 1
1179 /* Hardware ECC 3 byte ECC per 256 Byte data */
1180 #define NAND_ECC_HW3_256 2
1181 /* Hardware ECC 3 byte ECC per 512 Byte data */
1182 #define NAND_ECC_HW3_512 3
1183 /* Hardware ECC 6 byte ECC per 512 Byte data */
1184 #define NAND_ECC_HW6_512 4
1185 /* Hardware ECC 6 byte ECC per 512 Byte data */
1186 #define NAND_ECC_HW8_512 6
1191 <sect1 id="Hardware_control_related_constants">
1192 <title>Hardware control related constants</title>
1194 These constants describe the requested hardware access function when
1195 the boardspecific hardware control function is called
1197 /* Select the chip by setting nCE to low */
1198 #define NAND_CTL_SETNCE 1
1199 /* Deselect the chip by setting nCE to high */
1200 #define NAND_CTL_CLRNCE 2
1201 /* Select the command latch by setting CLE to high */
1202 #define NAND_CTL_SETCLE 3
1203 /* Deselect the command latch by setting CLE to low */
1204 #define NAND_CTL_CLRCLE 4
1205 /* Select the address latch by setting ALE to high */
1206 #define NAND_CTL_SETALE 5
1207 /* Deselect the address latch by setting ALE to low */
1208 #define NAND_CTL_CLRALE 6
1209 /* Set write protection by setting WP to high. Not used! */
1210 #define NAND_CTL_SETWP 7
1211 /* Clear write protection by setting WP to low. Not used! */
1212 #define NAND_CTL_CLRWP 8
1217 <sect1 id="Bad_block_table_constants">
1218 <title>Bad block table related constants</title>
1220 These constants describe the options used for bad block
1223 /* Options for the bad block table descriptors */
1225 /* The number of bits used per block in the bbt on the device */
1226 #define NAND_BBT_NRBITS_MSK 0x0000000F
1227 #define NAND_BBT_1BIT 0x00000001
1228 #define NAND_BBT_2BIT 0x00000002
1229 #define NAND_BBT_4BIT 0x00000004
1230 #define NAND_BBT_8BIT 0x00000008
1231 /* The bad block table is in the last good block of the device */
1232 #define NAND_BBT_LASTBLOCK 0x00000010
1233 /* The bbt is at the given page, else we must scan for the bbt */
1234 #define NAND_BBT_ABSPAGE 0x00000020
1235 /* The bbt is at the given page, else we must scan for the bbt */
1236 #define NAND_BBT_SEARCH 0x00000040
1237 /* bbt is stored per chip on multichip devices */
1238 #define NAND_BBT_PERCHIP 0x00000080
1239 /* bbt has a version counter at offset veroffs */
1240 #define NAND_BBT_VERSION 0x00000100
1241 /* Create a bbt if none axists */
1242 #define NAND_BBT_CREATE 0x00000200
1243 /* Search good / bad pattern through all pages of a block */
1244 #define NAND_BBT_SCANALLPAGES 0x00000400
1245 /* Scan block empty during good / bad block scan */
1246 #define NAND_BBT_SCANEMPTY 0x00000800
1247 /* Write bbt if neccecary */
1248 #define NAND_BBT_WRITE 0x00001000
1249 /* Read and write back block contents when writing bbt */
1250 #define NAND_BBT_SAVECONTENT 0x00002000
1257 <chapter id="structs">
1258 <title>Structures</title>
1260 This chapter contains the autogenerated documentation of the structures which are
1261 used in the NAND driver and might be relevant for a driver developer. Each
1262 struct member has a short description which is marked with an [XXX] identifier.
1263 See the chapter "Documentation hints" for an explanation.
1265 !Iinclude/linux/mtd/nand.h
1268 <chapter id="pubfunctions">
1269 <title>Public Functions Provided</title>
1271 This chapter contains the autogenerated documentation of the NAND kernel API functions
1272 which are exported. Each function has a short description which is marked with an [XXX] identifier.
1273 See the chapter "Documentation hints" for an explanation.
1275 !Edrivers/mtd/nand/nand_base.c
1276 !Edrivers/mtd/nand/nand_bbt.c
1277 !Edrivers/mtd/nand/nand_ecc.c
1280 <chapter id="intfunctions">
1281 <title>Internal Functions Provided</title>
1283 This chapter contains the autogenerated documentation of the NAND driver internal functions.
1284 Each function has a short description which is marked with an [XXX] identifier.
1285 See the chapter "Documentation hints" for an explanation.
1286 The functions marked with [DEFAULT] might be relevant for a board driver developer.
1288 !Idrivers/mtd/nand/nand_base.c
1289 !Idrivers/mtd/nand/nand_bbt.c
1290 <!-- No internal functions for kernel-doc:
1291 X!Idrivers/mtd/nand/nand_ecc.c
1295 <chapter id="credits">
1296 <title>Credits</title>
1298 The following people have contributed to the NAND driver:
1300 <listitem><para>Steven J. Hill<email>sjhill@realitydiluted.com</email></para></listitem>
1301 <listitem><para>David Woodhouse<email>dwmw2@infradead.org</email></para></listitem>
1302 <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>
1304 A lot of users have provided bugfixes, improvements and helping hands for testing.
1308 The following people have contributed to this document:
1310 <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>