1 device-tree bindings for rockchip soc display controller (vop)
3 VOP (Visual Output Processor) is the Display Controller for the Rockchip
4 series of SoCs which transfers the image data from a video memory
5 buffer to an external LCD interface.
8 - compatible: value should be one of the following
10 "rockchip,rk3036-vop";
12 - interrupts: should contain a list of all VOP IP block interrupts in the
13 order: VSYNC, LCD_SYSTEM. The interrupt specifier
14 format depends on the interrupt controller used.
16 - clocks: must include clock specifiers corresponding to entries in the
19 - clock-names: Must contain
20 aclk_vop: for ddr buffer transfer.
21 hclk_vop: for ahb bus to R/W the phy regs.
22 dclk_vop: pixel clock.
24 - resets: Must contain an entry for each entry in reset-names.
25 See ../reset/reset.txt for details.
26 - reset-names: Must include the following entries:
31 - iommus: required a iommu node
33 - port: A port node with endpoint definitions as defined in
34 Documentation/devicetree/bindings/media/video-interfaces.txt.
37 SoC specific DT entry:
39 compatible = "rockchip,rk3288-vop";
40 reg = <0xff930000 0x19c>;
41 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
42 clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
43 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
44 resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
45 reset-names = "axi", "ahb", "dclk";
50 vopb_out_edp: endpoint@0 {
52 remote-endpoint=<&edp_in_vopb>;
54 vopb_out_hdmi: endpoint@1 {
56 remote-endpoint=<&hdmi_in_vopb>;