1 * palmas regulator IP block devicetree bindings
4 - compatible : Should be from the list
10 and also the generic series names
12 - interrupt-parent : The parent interrupt controller which is palmas.
13 - interrupts : The interrupt number and the type which can be looked up here:
14 arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
15 - interrupts-name: The names of the individual interrupts.
18 - ti,ldo6-vibrator : ldo6 is in vibrator mode
21 - regulators : Must contain a sub-node per regulator from the list below.
22 Each sub-node should contain the constraints and initialization
23 information for that regulator. See regulator.txt for a
24 description of standard properties for these sub-nodes.
25 Additional custom properties are listed below.
27 For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
28 smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
29 smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb.
31 Optional sub-node properties:
32 ti,warm-reset - maintain voltage during warm reset(boolean)
33 ti,roof-floor - This takes as optional argument on platform supporting
34 the rail from desired external control. If there is no argument then
35 it will be assume that it is controlled by NSLEEP pin.
36 The valid value for external pins are:
40 ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
41 2 - eco, 3 - forced pwm
42 ti,smps-range - OTP has the wrong range set for the hardware so override
43 0 - low range, 1 - high range.
45 - ti,system-power-controller: Telling whether or not this pmic is controlling
50 #include <dt-bindings/interrupt-controller/irq.h>
53 compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
54 interrupt-parent = <&palmas>;
55 interrupts = <14 IRQ_TYPE_NONE>;
56 interrupts-name = "short-irq";
60 ti,system-power-controller;
64 regulator-name = "smps12";
65 regulator-min-microvolt = < 600000>;
66 regulator-max-microvolt = <1500000>;
70 ti,roof-floor = <1>; /* ENABLE1 control */
76 regulator-name = "ldo1";
77 regulator-min-microvolt = <2800000>;
78 regulator-max-microvolt = <2800000>;