]> git.karo-electronics.de Git - mv-sheeva.git/blob - Documentation/power/charger-manager.txt
power_supply: Add initial Charger-Manager driver
[mv-sheeva.git] / Documentation / power / charger-manager.txt
1 Charger Manager
2         (C) 2011 MyungJoo Ham <myungjoo.ham@samsung.com>, GPL
3
4 Charger Manager provides in-kernel battery charger management that
5 requires temperature monitoring during suspend-to-RAM state
6 and where each battery may have multiple chargers attached and the userland
7 wants to look at the aggregated information of the multiple chargers.
8
9 Charger Manager is a platform_driver with power-supply-class entries.
10 An instance of Charger Manager (a platform-device created with Charger-Manager)
11 represents an independent battery with chargers. If there are multiple
12 batteries with their own chargers acting independently in a system,
13 the system may need multiple instances of Charger Manager.
14
15 1. Introduction
16 ===============
17
18 Charger Manager supports the following:
19
20 * Support for multiple chargers (e.g., a device with USB, AC, and solar panels)
21         A system may have multiple chargers (or power sources) and some of
22         they may be activated at the same time. Each charger may have its
23         own power-supply-class and each power-supply-class can provide
24         different information about the battery status. This framework
25         aggregates charger-related information from multiple sources and
26         shows combined information as a single power-supply-class.
27
28 * Support for in suspend-to-RAM polling (with suspend_again callback)
29         While the battery is being charged and the system is in suspend-to-RAM,
30         we may need to monitor the battery health by looking at the ambient or
31         battery temperature. We can accomplish this by waking up the system
32         periodically. However, such a method wakes up devices unncessary for
33         monitoring the battery health and tasks, and user processes that are
34         supposed to be kept suspended. That, in turn, incurs unnecessary power
35         consumption and slow down charging process. Or even, such peak power
36         consumption can stop chargers in the middle of charging
37         (external power input < device power consumption), which not
38         only affects the charging time, but the lifespan of the battery.
39
40         Charger Manager provides a function "cm_suspend_again" that can be
41         used as suspend_again callback of platform_suspend_ops. If the platform
42         requires tasks other than cm_suspend_again, it may implement its own
43         suspend_again callback that calls cm_suspend_again in the middle.
44         Normally, the platform will need to resume and suspend some devices
45         that are used by Charger Manager.
46
47 2. Global Charger-Manager Data related with suspend_again
48 ========================================================
49 In order to setup Charger Manager with suspend-again feature
50 (in-suspend monitoring), the user should provide charger_global_desc
51 with setup_charger_manager(struct charger_global_desc *).
52 This charger_global_desc data for in-suspend monitoring is global
53 as the name suggests. Thus, the user needs to provide only once even
54 if there are multiple batteries. If there are multiple batteries, the
55 multiple instances of Charger Manager share the same charger_global_desc
56 and it will manage in-suspend monitoring for all instances of Charger Manager.
57
58 The user needs to provide all the two entries properly in order to activate
59 in-suspend monitoring:
60
61 struct charger_global_desc {
62
63 char *rtc_name;
64         : The name of rtc (e.g., "rtc0") used to wakeup the system from
65         suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
66         should be able to wake up the system from suspend. Charger Manager
67         saves and restores the alarm value and use the previously-defined
68         alarm if it is going to go off earlier than Charger Manager so that
69         Charger Manager does not interfere with previously-defined alarms.
70
71 bool (*rtc_only_wakeup)(void);
72         : This callback should let CM know whether
73         the wakeup-from-suspend is caused only by the alarm of "rtc" in the
74         same struct. If there is any other wakeup source triggered the
75         wakeup, it should return false. If the "rtc" is the only wakeup
76         reason, it should return true.
77 };
78
79 3. How to setup suspend_again
80 =============================
81 Charger Manager provides a function "extern bool cm_suspend_again(void)".
82 When cm_suspend_again is called, it monitors every battery. The suspend_ops
83 callback of the system's platform_suspend_ops can call cm_suspend_again
84 function to know whether Charger Manager wants to suspend again or not.
85 If there are no other devices or tasks that want to use suspend_again
86 feature, the platform_suspend_ops may directly refer to cm_suspend_again
87 for its suspend_again callback.
88
89 The cm_suspend_again() returns true (meaning "I want to suspend again")
90 if the system was woken up by Charger Manager and the polling
91 (in-suspend monitoring) results in "normal".
92
93 4. Charger-Manager Data (struct charger_desc)
94 =============================================
95 For each battery charged independently from other batteries (if a series of
96 batteries are charged by a single charger, they are counted as one independent
97 battery), an instance of Charger Manager is attached to it.
98
99 struct charger_desc {
100
101 enum polling_modes polling_mode;
102         : CM_POLL_DISABLE: do not poll this battery.
103           CM_POLL_ALWAYS: always poll this battery.
104           CM_POLL_EXTERNAL_POWER_ONLY: poll this battery if and only if
105                                        an external power source is attached.
106           CM_POLL_CHARGING_ONLY: poll this battery if and only if the
107                                  battery is being charged.
108
109 unsigned int polling_interval_ms;
110         : Required polling interval in ms. Charger Manager will poll
111         this battery every polling_interval_ms or more frequently.
112
113 enum data_source battery_present;
114         CM_FUEL_GAUGE: get battery presence information from fuel gauge.
115         CM_CHARGER_STAT: get battery presence from chargers.
116
117 char **psy_charger_stat;
118         : An array ending with NULL that has power-supply-class names of
119         chargers. Each power-supply-class should provide "PRESENT" (if
120         battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
121         external power source is attached or not), and "STATUS" (shows whether
122         the battery is {"FULL" or not FULL} or {"FULL", "Charging",
123         "Discharging", "NotCharging"}).
124
125 int num_charger_regulators;
126 struct regulator_bulk_data *charger_regulators;
127         : Regulators representing the chargers in the form for
128         regulator framework's bulk functions.
129
130 char *psy_fuel_gauge;
131         : Power-supply-class name of the fuel gauge.
132
133 int (*temperature_out_of_range)(int *mC);
134         : This callback returns 0 if the temperature is safe for charging,
135         a positive number if it is too hot to charge, and a negative number
136         if it is too cold to charge. With the variable mC, the callback returns
137         the temperature in 1/1000 of centigrade.
138 };
139
140 5. Other Considerations
141 =======================
142
143 At the charger/battery-related events such as battery-pulled-out,
144 charger-pulled-out, charger-inserted, DCIN-over/under-voltage, charger-stopped,
145 and others critical to chargers, the system should be configured to wake up.
146 At least the following should wake up the system from a suspend:
147 a) charger-on/off b) external-power-in/out c) battery-in/out (while charging)
148
149 It is usually accomplished by configuring the PMIC as a wakeup source.