2 Advanced Linux Sound Architecture - Driver
3 ==========================================
10 To enable ALSA support you need at least to build the kernel with
11 primary sound card support (CONFIG_SOUND). Since ALSA can emulate OSS,
12 you don't have to choose any of the OSS modules.
14 Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
15 PCM supports if you want to run OSS applications with ALSA.
17 If you want to support the WaveTable functionality on cards such as
18 SB Live! then you need to enable "Sequencer support"
19 (CONFIG_SND_SEQUENCER).
21 To make ALSA debug messages more verbose, enable the "Verbose printk"
22 and "Debug" options. To check for memory leaks, turn on "Debug memory"
23 too. "Debug detection" will add checks for the detection of cards.
25 Please note that all the ALSA ISA drivers support the Linux isapnp API
26 (if the card supports ISA PnP). You don't need to configure the cards
33 This depends on your distribution, but normally you use the /dev/MAKEDEV
34 script to create the necessary device nodes. On some systems you use a
35 script named 'snddevices'.
41 The user can load modules with options. If the module supports more than
42 one card and you have more than one card of the same type then you can
43 specify multiple values for the option separated by commas.
45 Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
50 The core ALSA module. It is used by all ALSA card drivers.
51 It takes the following options which have global effects.
53 major - major number for sound driver
56 - limiting card index for auto-loading (1-8)
58 - For auto-loading more than one card, specify this
59 option together with snd-card-X aliases.
60 slots - Reserve the slot index for the given driver.
61 This option takes multiple strings.
62 See "Module Autoloading Support" section for details.
67 The PCM OSS emulation module.
68 This module takes options which change the mapping of devices.
70 dsp_map - PCM device number maps assigned to the 1st OSS device.
72 adsp_map - PCM device number maps assigned to the 2st OSS device.
75 - Don't block opening busy PCM devices. Default: 1
77 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
78 the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped
79 to PCM #0 of the card #0.
80 For changing the second or later card, specify the option with
81 commas, such like "dsp_map=0,1".
83 nonblock_open option is used to change the behavior of the PCM
84 regarding opening the device. When this option is non-zero,
85 opening a busy OSS PCM device won't be blocked but return
86 immediately with EAGAIN (just like O_NONBLOCK flag).
91 This module takes options which change the mapping of devices.
92 similar to those of the snd-pcm-oss module.
94 midi_map - MIDI device number maps assigned to the 1st OSS device.
96 amidi_map - MIDI device number maps assigned to the 2st OSS device.
99 Common parameters for top sound card modules
100 --------------------------------------------
102 Each of top level sound card module takes the following options.
104 index - index (slot #) of sound card
105 - Values: 0 through 31 or negative
106 - If nonnegative, assign that index number
107 - if negative, interpret as a bitmask of permissible
108 indices; the first free permitted index is assigned
110 id - card ID (identifier or name)
111 - Can be up to 15 characters long
112 - Default: the card type
113 - A directory by this name is created under /proc/asound/
114 containing information about the card
115 - This ID can be used instead of the index number in
118 - Default: enabled, for PCI and ISA PnP cards
123 Module for AdLib FM cards.
125 port - port # for OPL chip
127 This module supports multiple cards. It does not support autoprobe, so
128 the port must be specified. For actual AdLib FM cards it will be 0x388.
129 Note that this card does not have PCM support and no mixer; only FM
132 Make sure you have "sbiload" from the alsa-tools package available and,
133 after loading the module, find out the assigned ALSA sequencer port
134 number through "sbiload -l". Example output:
136 Port Client name Port name
137 64:0 OPL2 FM synth OPL2 FM Port
139 Load the std.sb and drums.sb patches also supplied by sbiload:
141 sbiload -p 64:0 std.sb drums.sb
143 If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
144 instead. To have the card produce sound, use aplaymidi from alsa-utils:
146 aplaymidi -p 64:0 foo.mid
151 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
153 clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz)
155 This module supports multiple cards, autoprobe and PnP.
160 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
162 port - port # for AD1848 chip
163 irq - IRQ # for AD1848 chip
164 dma1 - DMA # for AD1848 chip (0,1,3)
166 This module supports multiple cards. It does not support autoprobe
167 thus main port must be specified!!! Other ports are optional.
169 The power-management is supported.
174 Module for Analog Devices AD1889 chips.
176 ac97_quirk - AC'97 workaround for strange hardware
177 See the description of intel8x0 module for details.
179 This module supports multiple cards.
184 Module for ALi M5451 PCI chip.
186 pcm_channels - Number of hardware channels assigned for PCM
187 spdif - Support SPDIF I/O
190 This module supports one chip and autoprobe.
192 The power-management is supported.
197 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
199 This module supports multiple cards, autoprobe and PnP.
201 The power-management is supported.
206 Module for Avance Logic ALS300 and ALS300+
208 This module supports multiple cards.
210 The power-management is supported.
215 Module for sound cards based on Avance Logic ALS4000 PCI chip.
217 joystick_port - port # for legacy joystick support.
218 0 = disabled (default), 1 = auto-detect
220 This module supports multiple cards, autoprobe and PnP.
222 The power-management is supported.
227 Module for ATI IXP 150/200/250/400 AC97 controllers.
229 ac97_clock - AC'97 clock (default = 48000)
230 ac97_quirk - AC'97 workaround for strange hardware
231 See "AC97 Quirk Option" section below.
232 ac97_codec - Workaround to specify which AC'97 codec
233 instead of probing. If this works for you
234 file a bug with your `lspci -vn` output.
236 -1 -- Default behavior.
237 0-2 -- Use the specified codec.
238 spdif_aclink - S/PDIF transfer over AC-link (default = 1)
240 This module supports one card and autoprobe.
242 ATI IXP has two different methods to control SPDIF output. One is
243 over AC-link and another is over the "direct" SPDIF output. The
244 implementation depends on the motherboard, and you'll need to
245 choose the correct one via spdif_aclink module option.
247 The power-management is supported.
249 Module snd-atiixp-modem
250 -----------------------
252 Module for ATI IXP 150/200/250 AC97 modem controllers.
254 This module supports one card and autoprobe.
256 Note: The default index value of this module is -2, i.e. the first
259 The power-management is supported.
261 Module snd-au8810, snd-au8820, snd-au8830
262 -----------------------------------------
264 Module for Aureal Vortex, Vortex2 and Advantage device.
266 pcifix - Control PCI workarounds
267 0 = Disable all workarounds
268 1 = Force the PCI latency of the Aureal card to 0xff
269 2 = Force the Extend PCI#2 Internal Master for Efficient
270 Handling of Dummy Requests on the VIA KT133 AGP Bridge
271 3 = Force both settings
272 255 = Autodetect what is required (default)
274 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
275 EQ, mpu401, gameport. A3D and wavetable support are still in development.
276 Development and reverse engineering work is being coordinated at
277 http://savannah.nongnu.org/projects/openvortex/
278 SPDIF output has a copy of the AC97 codec output, unless you use the
279 "spdif" pcm device, which allows raw data passthru.
280 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
283 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
284 control correctly. If you have problems regarding this, try
285 another ALSA compliant mixer (alsamixer works).
290 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
292 This module supports multiple cards, PnP and autoprobe.
294 The power-management is supported.
299 Module for sound cards based on Aztech AZF3328 PCI chip.
301 joystick - Enable joystick (default off)
303 This module supports multiple cards.
308 Module for video cards based on Bt87x chips.
310 digital_rate - Override the default digital rate (Hz)
311 load_all - Load the driver even if the card model isn't known
313 This module supports multiple cards.
315 Note: The default index value of this module is -2, i.e. the first
321 Module for Creative Audigy LS and SB Live 24bit
323 This module supports multiple cards.
329 Module for sound cards based on C-Media CMI8330 ISA chips.
331 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
333 with isapnp=0, the following options are available:
335 wssport - port # for CMI8330 chip (WSS)
336 wssirq - IRQ # for CMI8330 chip (WSS)
337 wssdma - first DMA # for CMI8330 chip (WSS)
338 sbport - port # for CMI8330 chip (SB16)
339 sbirq - IRQ # for CMI8330 chip (SB16)
340 sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
341 sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
343 This module supports multiple cards and autoprobe.
345 The power-management is supported.
350 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
352 mpu_port - port address of MIDI interface (8338 only):
353 0x300,0x310,0x320,0x330 = legacy port,
354 0 = disable (default)
355 fm_port - port address of OPL-3 FM synthesizer (8x38 only):
357 1 = integrated PCI port (default on 8738),
359 soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
361 joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
363 This module supports autoprobe and multiple cards.
365 The power-management is supported.
370 Module for sound cards based on CS4231 ISA chips.
372 port - port # for CS4231 chip
373 mpu_port - port # for MPU-401 UART (optional), -1 = disable
374 irq - IRQ # for CS4231 chip
375 mpu_irq - IRQ # for MPU-401 UART
376 dma1 - first DMA # for CS4231 chip
377 dma2 - second DMA # for CS4231 chip
379 This module supports multiple cards. This module does not support autoprobe
380 thus main port must be specified!!! Other ports are optional.
382 The power-management is supported.
387 Module for sound cards based on CS4232/CS4232A ISA chips.
389 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
391 with isapnp=0, the following options are available:
393 port - port # for CS4232 chip (PnP setup - 0x534)
394 cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
395 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
396 fm_port - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
397 irq - IRQ # for CS4232 chip (5,7,9,11,12,15)
398 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
399 dma1 - first DMA # for CS4232 chip (0,1,3)
400 dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
402 This module supports multiple cards. This module does not support autoprobe
403 (if ISA PnP is not used) thus main port must be specified!!! Other ports are
406 The power-management is supported.
411 Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
412 CS4238B/CS4239 ISA chips.
414 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
416 with isapnp=0, the following options are available:
418 port - port # for CS4236 chip (PnP setup - 0x534)
419 cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
420 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
421 fm_port - FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
422 irq - IRQ # for CS4236 chip (5,7,9,11,12,15)
423 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
424 dma1 - first DMA # for CS4236 chip (0,1,3)
425 dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
427 This module supports multiple cards. This module does not support autoprobe
428 (if ISA PnP is not used) thus main port and control port must be
429 specified!!! Other ports are optional.
431 The power-management is supported.
436 Module for Cirrus Logic CS4281 soundchip.
438 dual_codec - Secondary codec ID (0 = disable, default)
440 This module supports multiple cards.
442 The power-management is supported.
447 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
448 CS4624/CS4630/CS4280 PCI chips.
450 external_amp - Force to enable external amplifier.
451 thinkpad - Force to enable Thinkpad's CLKRUN control.
452 mmap_valid - Support OSS mmap mode (default = 0).
454 This module supports multiple cards and autoprobe.
455 Usually external amp and CLKRUN controls are detected automatically
456 from PCI sub vendor/device ids. If they don't work, give the options
459 The power-management is supported.
464 Module for Cyrix/NatSemi Geode 5530 chip.
466 Module snd-cs5535audio
467 ----------------------
469 Module for multifunction CS5535 companion PCI device
471 The power-management is supported.
476 Module for Echoaudio Darla20
478 This module supports multiple cards.
479 The driver requires the firmware loader support on kernel.
484 Module for Echoaudio Darla24
486 This module supports multiple cards.
487 The driver requires the firmware loader support on kernel.
492 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
495 This module supports multiple cards. This module is enabled only with
498 The power-management is supported.
503 Module for the dummy sound card. This "card" doesn't do any output
504 or input, but you may use this module for any application which
505 requires a sound card (like RealPlayer).
507 The power-management is supported.
512 Module for Echoaudio 3G cards (Gina3G/Layla3G)
514 This module supports multiple cards.
515 The driver requires the firmware loader support on kernel.
520 Module for EMU10K1/EMU10k2 based PCI sound cards.
521 * Sound Blaster Live!
522 * Sound Blaster PCI 512
523 * Emu APS (partially supported)
524 * Sound Blaster Audigy
526 extin - bitmap of available external inputs for FX8010 (see bellow)
527 extout - bitmap of available external outputs for FX8010 (see bellow)
528 seq_ports - allocated sequencer ports (4 by default)
529 max_synth_voices - limit of voices used for wavetable (64 by default)
530 max_buffer_size - specifies the maximum size of wavetable/pcm buffers
531 given in MB unit. Default value is 128.
532 enable_ir - enable IR
534 This module supports multiple cards and autoprobe.
536 Input & Output configurations [extin/extout]
537 * Creative Card wo/Digital out [0x0003/0x1f03]
538 * Creative Card w/Digital out [0x0003/0x1f0f]
539 * Creative Card w/Digital CD in [0x000f/0x1f0f]
540 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
541 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
542 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
543 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
544 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
545 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
546 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
547 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
548 * Creative Card all ins and outs [0x3fff/0x7fff]
550 The power-management is supported.
555 Module for Creative Emu10k1X (SB Live Dell OEM version)
557 This module supports multiple cards.
562 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
563 * SoundBlaster PCI 64
564 * SoundBlaster PCI 128
566 joystick - Enable joystick (default off)
568 This module supports multiple cards and autoprobe.
570 The power-management is supported.
575 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
576 * SoundBlaster PCI 64
577 * SoundBlaster PCI 128
578 * SoundBlaster Vibra PCI
580 joystick_port - port # for joystick (0x200,0x208,0x210,0x218),
581 0 = disable (default), 1 = auto-detect
583 This module supports multiple cards and autoprobe.
585 The power-management is supported.
590 Module for sound cards based on ESS ES968 chip (PnP only).
592 This module supports multiple cards, PnP and autoprobe.
594 The power-management is supported.
599 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
601 port - port # for ES-1688 chip (0x220,0x240,0x260)
602 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
603 irq - IRQ # for ES-1688 chip (5,7,9,10)
604 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
605 dma8 - DMA # for ES-1688 chip (0,1,3)
607 This module supports multiple cards and autoprobe (without MPU-401 port).
612 Module for ESS AudioDrive ES-18xx sound cards.
614 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
616 with isapnp=0, the following options are available:
618 port - port # for ES-18xx chip (0x220,0x240,0x260)
619 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
620 fm_port - port # for FM (optional, not used)
621 irq - IRQ # for ES-18xx chip (5,7,9,10)
622 dma1 - first DMA # for ES-18xx chip (0,1,3)
623 dma2 - first DMA # for ES-18xx chip (0,1,3)
625 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
626 port if native ISA PnP routines are not used).
627 When dma2 is equal with dma1, the driver works as half-duplex.
629 The power-management is supported.
634 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
636 This module supports multiple cards and autoprobe.
638 The power-management is supported.
643 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
645 total_bufsize - total buffer size in kB (1-4096kB)
646 pcm_substreams_p - playback channels (1-8, default=2)
647 pcm_substreams_c - capture channels (1-8, default=0)
648 clock - clock (0 = auto-detection)
649 use_pm - support the power-management (0 = off, 1 = on,
651 enable_mpu - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
652 joystick - enable joystick (default off)
654 This module supports multiple cards and autoprobe.
656 The power-management is supported.
661 Module for ForteMedia FM801 based PCI sound cards.
663 tea575x_tuner - Enable TEA575x tuner
664 - 1 = MediaForte 256-PCS
665 - 2 = MediaForte 256-PCPR
666 - 3 = MediaForte 64-PCR
667 - High 16-bits are video (radio) device number + 1
668 - example: 0x10002 (MediaForte 256-PCPR, device 1)
670 This module supports multiple cards and autoprobe.
672 The power-management is supported.
677 Module for Echoaudio Gina20
679 This module supports multiple cards.
680 The driver requires the firmware loader support on kernel.
685 Module for Echoaudio Gina24
687 This module supports multiple cards.
688 The driver requires the firmware loader support on kernel.
690 Module snd-gusclassic
691 ---------------------
693 Module for Gravis UltraSound Classic sound card.
695 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
696 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
697 dma1 - DMA # for GF1 chip (1,3,5,6,7)
698 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
699 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
700 voices - GF1 voices limit (14-32)
701 pcm_voices - reserved PCM voices
703 This module supports multiple cards and autoprobe.
705 Module snd-gusextreme
706 ---------------------
708 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
710 port - port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
711 gf1_port - port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
712 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
713 irq - IRQ # for ES-1688 chip (5,7,9,10)
714 gf1_irq - IRQ # for GF1 chip (3,5,9,11,12,15)
715 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
716 dma8 - DMA # for ES-1688 chip (0,1,3)
717 dma1 - DMA # for GF1 chip (1,3,5,6,7)
718 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
719 voices - GF1 voices limit (14-32)
720 pcm_voices - reserved PCM voices
722 This module supports multiple cards and autoprobe (without MPU-401 port).
727 Module for Gravis UltraSound MAX sound card.
729 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
730 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
731 dma1 - DMA # for GF1 chip (1,3,5,6,7)
732 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
733 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
734 voices - GF1 voices limit (14-32)
735 pcm_voices - reserved PCM voices
737 This module supports multiple cards and autoprobe.
742 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
743 ATI SB450, SB600, RS600,
747 [Multiple options for each card instance]
748 model - force the model name
749 position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
750 probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
752 [Single (global) options]
753 single_cmd - Use single immediate commands to communicate with
754 codecs (for debugging only)
755 enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
756 power_save - Automatic power-saving timtout (in second, 0 =
758 power_save_controller - Reset HD-audio controller in power-saving mode
761 This module supports multiple cards and autoprobe.
763 Each codec may have a model table for different configurations.
764 If your machine isn't listed there, the default (usually minimal)
765 configuration is set up. You can pass "model=<name>" option to
766 specify a certain model in such a case. There are different
767 models depending on the codec chip.
769 Model name Description
770 ---------- -----------
772 3stack 3-jack in back and a headphone out
773 3stack-digout 3-jack in back, a HP out and a SPDIF out
774 5stack 5-jack in back, 2-jack in front
775 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
776 6stack 6-jack in back, 2-jack in front
777 6stack-digout 6-jack with a SPDIF out
779 z71v 3-jack (HP shared SPDIF)
780 asus 3-jack (ASUS Mobo)
782 asus-dig ASUS with SPDIF out
783 asus-dig2 ASUS with SPDIF out (using GPIO2)
785 fujitsu Fujitsu Laptops (Pi1536)
787 lg LG laptop (m1 express dual)
788 lg-lw LG LW20/LW25 laptop
790 clevo Clevo laptops (m520G, m665n)
791 test for testing/debugging purpose, almost all controls can be
792 adjusted. Appearing only when compiled with
794 auto auto-config reading BIOS (default)
798 hp-3013 HP machines (3013-variant)
799 fujitsu Fujitsu S7020
801 will Will laptops (PB V7900)
802 replacer Replacer 672V
803 basic fixed pin assignment (old default model)
804 test for testing/debugging purpose, almost all controls can
805 adjusted. Appearing only when compiled with
807 auto auto-config reading BIOS (default)
810 fujitsu Fujitsu Laptop
811 hp-bpc HP xw4400/6400/8400/9400 laptops
812 hp-bpc-d7000 HP BPC D7000
813 hp-tc-t5735 HP Thin Client T5735
817 hippo Hippo (ATI) with jack detection, Sony UX-90s
818 hippo_1 Hippo (Benq) with jack detection
819 sony-assamd Sony ASSAMD
820 ultra Samsung Q1 Ultra Vista model
821 basic fixed pin assignment w/o SPDIF
822 auto auto-config reading BIOS (default)
828 dell Dell OEM laptops (Vostro 1200)
830 test for testing/debugging purpose, almost all controls can
831 adjusted. Appearing only when compiled with
833 auto auto-config reading BIOS (default)
836 3stack-dig 3-stack (2-channel) with SPDIF
837 3stack-6ch 3-stack (6-channel)
838 3stack-6ch-dig 3-stack (6-channel) with SPDIF
839 6stack-dig 6-stack with SPDIF
840 lenovo-101e Lenovo laptop
841 eeepc-p701 ASUS Eeepc P701
842 eeepc-ep20 ASUS Eeepc EP20
843 auto auto-config reading BIOS (default)
846 3stack-dig 3-jack with SPDIF I/O
847 6stack-dig 6-jack digital with SPDIF I/O
849 targa Targa T8, MSI-1049 T8
852 macpro MacPro support
853 mbp3 Macbook Pro rev3
854 imac24 iMac 24'' with jack detection
856 auto auto-config reading BIOS (default)
859 3stack-dig 3-jack with SPDIF I/O
860 6stack-dig 6-jack digital with SPDIF I/O
861 3stack-6ch 3-jack 6-channel
862 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
863 6stack-dig-demo 6-jack digital for Intel demo board
864 acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
865 acer-aspire Acer Aspire 9810
866 medion Medion Laptops
867 medion-md2 Medion MD2
869 targa-2ch-dig Targs/MSI with 2-channel
870 laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
871 lenovo-101e Lenovo 101E
872 lenovo-nb0763 Lenovo NB0763
873 lenovo-ms7195-dig Lenovo MS7195
875 6stack-hp HP machines with 6stack (Nettle boards)
876 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
877 6stack-dell Dell machines with 6stack (Inspiron 530)
879 auto auto-config reading BIOS (default)
883 3stack-dig 3-jack with SPDIF I/O
884 6stack-dig 6-jack with SPDIF I/O
885 3stack-660 3-jack (for ALC660)
886 uniwill-m31 Uniwill M31 laptop
887 toshiba Toshiba laptop support
888 asus Asus laptop support
889 asus-laptop ASUS F2/F3 laptops
890 auto auto-config reading BIOS (default)
894 3stack-dig 3-jack with SPDIF OUT
895 6stack-dig 6-jack with SPDIF OUT
896 3stack-660 3-jack (for ALC660VD)
897 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
898 lenovo Lenovo 3000 C200
899 dallas Dallas laptops
901 auto auto-config reading BIOS (default)
904 minimal 3-jack in back
905 min_fp 3-jack in back, 2-jack in front
906 full 6-jack in back, 2-jack in front
907 full_dig 6-jack in back, 2-jack in front, SPDIF I/O
908 allout 5-jack in back, 2-jack in front, SPDIF out
909 auto auto-config reading BIOS (default)
912 3stack 3-stack mode (default)
919 basic 3-jack (default)
921 thinkpad Lenovo Thinkpad T60/X60/Z60
928 basic default configuration
929 thinkpad Lenovo Thinkpad T61/X61
933 6stack 6-jack, separate surrounds (default)
934 3stack 3-stack, shared surrounds
935 laptop 2-channel only (FSC V2060, Samsung M50)
936 laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
937 laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
938 ultra 2-channel with EAPD (Samsung Ultra tablet PC)
942 6stack-dig ditto with SPDIF
944 3stack-dig ditto with SPDIF
945 laptop 3-jack with hp-jack automute
946 laptop-dig ditto with SPDIF
947 auto auto-config reading BIOS (default)
950 laptop-hpsense Laptop with HP sense (old model laptop)
951 laptop-micsense Laptop with Mic sense (old model fujitsu)
952 laptop-hpmicsense Laptop with HP and Mic senses
954 test for testing/debugging purpose, almost all controls
955 can be adjusted. Appearing only when compiled with
959 laptop Basic Laptop config
960 laptop-hp Laptop config for some HP models (subdevice 30A5)
961 laptop-eapd Laptop config with EAPD support
962 test for testing/debugging purpose, almost all controls
963 can be adjusted. Appearing only when compiled with
967 laptop Basic Laptop config (default)
972 dell-d21 Dell (unknown)
973 dell-d22 Dell (unknown)
974 dell-d23 Dell (unknown)
975 dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
976 dell-m22 Dell Latitude D620, Dell Latitude D820
977 dell-m23 Dell XPS M1710, Dell Precision M90
978 dell-m24 Dell Latitude 120L
979 dell-m25 Dell Inspiron E1505n
980 dell-m26 Dell Inspiron 1501
981 dell-m27 Dell Inspiron E1705/9400
982 gateway Gateway laptops with EAPD control
986 dell-m42 Dell (unknown)
987 dell-m43 Dell Precision
988 dell-m44 Dell Inspiron
993 5stack D945 5stack + SPDIF
994 intel-mac-v1 Intel Mac Type 1
995 intel-mac-v2 Intel Mac Type 2
996 intel-mac-v3 Intel Mac Type 3
997 intel-mac-v4 Intel Mac Type 4
998 intel-mac-v5 Intel Mac Type 5
999 macmini Intel Mac Mini (equivalent with type 3)
1000 macbook Intel Mac Book (eq. type 5)
1001 macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
1002 macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
1003 imac-intel Intel iMac (eq. type 2)
1004 imac-intel-20 Intel iMac (newer version) (eq. type 3)
1005 dell-d81 Dell (unknown)
1006 dell-d82 Dell (unknown)
1007 dell-m81 Dell (unknown)
1008 dell-m82 Dell XPS M1210
1011 ref Reference board, base config
1012 m2-2 Some Gateway MX series laptops
1013 m6 Some Gateway NX series laptops
1014 pa6 Gateway NX860 series
1016 STAC9227/9228/9229/927x
1019 5stack D965 5stack + SPDIF
1020 dell-3stack Dell Dimension E520
1023 vaio Setup for VAIO FE550G/SZ110
1024 vaio-ar Setup for VAIO AR
1026 The model name "genric" is treated as a special case. When this
1027 model is given, the driver uses the generic codec parser without
1028 "codec-patch". It's sometimes good for testing and debugging.
1030 If the default configuration doesn't work and one of the above
1031 matches with your device, report it together with the PCI
1032 subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
1033 ML (see the section "Links and Addresses").
1035 power_save and power_save_controller options are for power-saving
1036 mode. See powersave.txt for details.
1038 Note 2: If you get click noises on output, try the module option
1039 position_fix=1 or 2. position_fix=1 will use the SD_LPIB
1040 register value without FIFO size correction as the current
1041 DMA pointer. position_fix=2 will make the driver to use
1042 the position buffer instead of reading SD_LPIB register.
1043 (Usually SD_LPLIB register is more accurate than the
1046 NB: If you get many "azx_get_response timeout" messages at
1047 loading, it's likely a problem of interrupts (e.g. ACPI irq
1048 routing). Try to boot with options like "pci=noacpi". Also, you
1049 can try "single_cmd=1" module option. This will switch the
1050 communication method between HDA controller and codecs to the
1051 single immediate commands instead of CORB/RIRB. Basically, the
1052 single command mode is provided only for BIOS, and you won't get
1053 unsolicited events, too. But, at least, this works independently
1054 from the irq. Remember this is a last resort, and should be
1055 avoided as much as possible...
1057 MORE NOTES ON "azx_get_response timeout" PROBLEMS:
1058 On some hardwares, you may need to add a proper probe_mask option
1059 to avoid the "azx_get_response timeout" problem above, instead.
1060 This occurs when the access to non-existing or non-working codec slot
1061 (likely a modem one) causes a stall of the communication via HD-audio
1062 bus. You can see which codec slots are probed by enabling
1063 CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec
1064 proc files. Then limit the slots to probe by probe_mask option.
1065 For example, probe_mask=1 means to probe only the first slot, and
1066 probe_mask=4 means only the third slot.
1068 The power-management is supported.
1073 Module for RME Hammerfall DSP audio interface(s)
1075 This module supports multiple cards.
1077 Note: The firmware data can be automatically loaded via hotplug
1078 when CONFIG_FW_LOADER is set. Otherwise, you need to load
1079 the firmware via hdsploader utility included in alsa-tools
1081 The firmware data is found in alsa-firmware package.
1083 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1084 module did formerly. It will allocate the buffers in advance
1085 when any HDSP cards are found. To make the buffer
1086 allocation sure, load snd-page-alloc module in the early
1087 stage of boot sequence. See "Early Buffer Allocation"
1093 Module for RME HDSP MADI board.
1095 precise_ptr - Enable precise pointer, or disable.
1096 line_outs_monitor - Send playback streams to analog outs by default.
1097 enable_monitor - Enable Analog Out on Channel 63/64 by default.
1099 See hdspm.txt for details.
1104 Module for the MediaTek/TempoTec HiFier Fantasia sound card.
1106 This module supports autoprobe and multiple cards.
1108 Power management is _not_ supported.
1113 Module for Envy24 (ICE1712) based PCI sound cards.
1114 * MidiMan M Audio Delta 1010
1115 * MidiMan M Audio Delta 1010LT
1116 * MidiMan M Audio Delta DiO 2496
1117 * MidiMan M Audio Delta 66
1118 * MidiMan M Audio Delta 44
1119 * MidiMan M Audio Delta 410
1120 * MidiMan M Audio Audiophile 2496
1123 * TerraTec EWX 24/96
1124 * TerraTec DMX 6Fire
1126 * Hoontech SoundTrack DSP 24
1127 * Hoontech SoundTrack DSP 24 Value
1128 * Hoontech SoundTrack DSP 24 Media 7.1
1129 * Event Electronics, EZ8
1131 * Lionstracs, Mediastaton
1133 model - Use the given board model, one of the following:
1134 delta1010, dio2496, delta66, delta44, audiophile, delta410,
1135 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
1136 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
1137 phase88, mediastation
1138 omni - Omni I/O support for MidiMan M-Audio Delta44/66
1139 cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transceiver)
1140 in msec resolution, default value is 500 (0.5 sec)
1142 This module supports multiple cards and autoprobe. Note: The consumer part
1143 is not used with all Envy24 based cards (for example in the MidiMan Delta
1146 Note: The supported board is detected by reading EEPROM or PCI
1147 SSID (if EEPROM isn't available). You can override the
1148 model by passing "model" module option in case that the
1149 driver isn't configured properly or you want to try another
1155 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
1156 * MidiMan M Audio Revolution 5.1
1157 * MidiMan M Audio Revolution 7.1
1158 * MidiMan M Audio Audiophile 192
1160 * TerraTec Aureon 5.1 Sky
1161 * TerraTec Aureon 7.1 Space
1162 * TerraTec Aureon 7.1 Universe
1165 * AudioTrak Prodigy 7.1
1166 * AudioTrak Prodigy 7.1LT
1167 * AudioTrak Prodigy 192
1169 * Albatron K8X800 Pro II
1170 * Chaintech ZNF3-150
1171 * Chaintech ZNF3-250
1178 model - Use the given board model, one of the following:
1179 revo51, revo71, amp2000, prodigy71, prodigy71lt,
1180 prodigy192, aureon51, aureon71, universe, ap192,
1181 k8x800, phase22, phase28, ms300, av710, se200pci,
1184 This module supports multiple cards and autoprobe.
1186 Note: The supported board is detected by reading EEPROM or PCI
1187 SSID (if EEPROM isn't available). You can override the
1188 model by passing "model" module option in case that the
1189 driver isn't configured properly or you want to try another
1195 Module for Echoaudio Indigo
1197 This module supports multiple cards.
1198 The driver requires the firmware loader support on kernel.
1203 Module for Echoaudio Indigo DJ
1205 This module supports multiple cards.
1206 The driver requires the firmware loader support on kernel.
1211 Module for Echoaudio Indigo IO
1213 This module supports multiple cards.
1214 The driver requires the firmware loader support on kernel.
1219 Module for AC'97 motherboards from Intel and compatibles.
1220 * Intel i810/810E, i815, i820, i830, i84x, MX440
1221 ICH5, ICH6, ICH7, ESB2
1222 * SiS 7012 (SiS 735)
1223 * NVidia NForce, NForce2, NForce3, MCP04, CK804
1225 * AMD AMD768, AMD8111
1228 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1229 ac97_quirk - AC'97 workaround for strange hardware
1230 See "AC97 Quirk Option" section below.
1231 buggy_irq - Enable workaround for buggy interrupts on some
1232 motherboards (default yes on nForce chips,
1234 buggy_semaphore - Enable workaround for hardwares with buggy
1235 semaphores (e.g. on some ASUS laptops)
1237 spdif_aclink - Use S/PDIF over AC-link instead of direct connection
1238 from the controller chip
1239 (0 = off, 1 = on, -1 = default)
1241 This module supports one chip and autoprobe.
1243 Note: the latest driver supports auto-detection of chip clock.
1244 if you still encounter too fast playback, specify the clock
1245 explicitly via the module option "ac97_clock=41194".
1247 Joystick/MIDI ports are not supported by this driver. If your
1248 motherboard has these devices, use the ns558 or snd-mpu401
1249 modules, respectively.
1251 The power-management is supported.
1253 Module snd-intel8x0m
1254 --------------------
1256 Module for Intel ICH (i8x0) chipset MC97 modems.
1257 * Intel i810/810E, i815, i820, i830, i84x, MX440
1259 * SiS 7013 (SiS 735)
1260 * NVidia NForce, NForce2, NForce2s, NForce3
1264 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1266 This module supports one card and autoprobe.
1268 Note: The default index value of this module is -2, i.e. the first
1271 The power-management is supported.
1273 Module snd-interwave
1274 --------------------
1276 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1277 and other sound cards based on AMD InterWave (tm) chip.
1279 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1280 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1281 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1282 effect - 1 = InterWave effects enable (default 0);
1284 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1286 with isapnp=0, the following options are available:
1288 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1289 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1290 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1291 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1293 This module supports multiple cards, autoprobe and ISA PnP.
1295 Module snd-interwave-stb
1296 ------------------------
1298 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1299 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1300 circuit for extended control of bass, treble and master volume.
1302 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1303 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1304 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1305 effect - 1 = InterWave effects enable (default 0);
1307 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1309 with isapnp=0, the following options are available:
1311 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1312 port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1313 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1314 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1315 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1317 This module supports multiple cards, autoprobe and ISA PnP.
1322 Module for Korg 1212 IO PCI card
1324 This module supports multiple cards.
1329 Module for Echoaudio Layla20
1331 This module supports multiple cards.
1332 The driver requires the firmware loader support on kernel.
1337 Module for Echoaudio Layla24
1339 This module supports multiple cards.
1340 The driver requires the firmware loader support on kernel.
1345 Module for Allegro/Maestro3 chips
1347 external_amp - enable external amp (enabled by default)
1348 amp_gpio - GPIO pin number for external amp (0-15) or
1349 -1 for default pin (8 for allegro, 1 for
1352 This module supports autoprobe and multiple chips.
1354 Note: the binding of amplifier is dependent on hardware.
1355 If there is no sound even though all channels are unmuted, try to
1356 specify other gpio connection via amp_gpio option.
1357 For example, a Panasonic notebook might need "amp_gpio=0x0d"
1360 The power-management is supported.
1365 Module for Echoaudio Mia
1367 This module supports multiple cards.
1368 The driver requires the firmware loader support on kernel.
1373 Module for Miro soundcards: miroSOUND PCM 1 pro,
1375 miroSOUND PCM 20 Radio.
1377 port - Port # (0x530,0x604,0xe80,0xf40)
1378 irq - IRQ # (5,7,9,10,11)
1379 dma1 - 1st dma # (0,1,3)
1380 dma2 - 2nd dma # (0,1)
1381 mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
1382 mpu_irq - MPU-401 irq # (5,7,9,10)
1383 fm_port - FM Port # (0x388)
1384 wss - enable WSS mode
1385 ide - enable onboard ide support
1390 Module for Digigram miXart8 sound cards.
1392 This module supports multiple cards.
1393 Note: One miXart8 board will be represented as 4 alsa cards.
1394 See MIXART.txt for details.
1396 When the driver is compiled as a module and the hotplug firmware
1397 is supported, the firmware data is loaded via hotplug automatically.
1398 Install the necessary firmware files in alsa-firmware package.
1399 When no hotplug fw loader is available, you need to load the
1400 firmware via mixartloader utility in alsa-tools package.
1405 Module for Echoaudio Mona
1407 This module supports multiple cards.
1408 The driver requires the firmware loader support on kernel.
1413 Module for MPU-401 UART devices.
1415 port - port number or -1 (disable)
1416 irq - IRQ number or -1 (disable)
1417 pnp - PnP detection - 0 = disable, 1 = enable (default)
1419 This module supports multiple devices and PnP.
1424 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1427 port - I/O port # for MTPAV (0x378,0x278, default=0x378)
1428 irq - IRQ # for MTPAV (7,5, default=7)
1429 hwports - number of supported hardware ports, default=8.
1431 Module supports only 1 card. This module has no enable option.
1436 Module for Ego Systems (ESI) Miditerminal 4140
1438 This module supports multiple devices.
1439 Requires parport (CONFIG_PARPORT).
1444 Module for NeoMagic NM256AV/ZX chips
1446 playback_bufsize - max playback frame size in kB (4-128kB)
1447 capture_bufsize - max capture frame size in kB (4-128kB)
1448 force_ac97 - 0 or 1 (disabled by default)
1449 buffer_top - specify buffer top address
1450 use_cache - 0 or 1 (disabled by default)
1451 vaio_hack - alias buffer_top=0x25a800
1452 reset_workaround - enable AC97 RESET workaround for some laptops
1453 reset_workaround2 - enable extended AC97 RESET workaround for some
1456 This module supports one chip and autoprobe.
1458 The power-management is supported.
1460 Note: on some notebooks the buffer address cannot be detected
1461 automatically, or causes hang-up during initialization.
1462 In such a case, specify the buffer top address explicitly via
1463 the buffer_top option.
1465 Sony F250: buffer_top=0x25a800
1466 Sony F270: buffer_top=0x272800
1467 The driver supports only ac97 codec. It's possible to force
1468 to initialize/use ac97 although it's not detected. In such a
1469 case, use force_ac97=1 option - but *NO* guarantee whether it
1472 Note: The NM256 chip can be linked internally with non-AC97
1473 codecs. This driver supports only the AC97 codec, and won't work
1474 with machines with other (most likely CS423x or OPL3SAx) chips,
1475 even though the device is detected in lspci. In such a case, try
1476 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1477 but some doesn't have ISA PnP. You'll need to specify isapnp=0
1478 and proper hardware parameters in the case without ISA PnP.
1480 Note: some laptops need a workaround for AC97 RESET. For the
1481 known hardware like Dell Latitude LS and Sony PCG-F305, this
1482 workaround is enabled automatically. For other laptops with a
1483 hard freeze, you can try reset_workaround=1 option.
1485 Note: Dell Latitude CSx laptops have another problem regarding
1486 AC97 RESET. On these laptops, reset_workaround2 option is
1487 turned on as default. This option is worth to try if the
1488 previous reset_workaround option doesn't help.
1490 Note: This driver is really crappy. It's a porting from the
1491 OSS driver, which is a result of black-magic reverse engineering.
1492 The detection of codec will fail if the driver is loaded *after*
1493 X-server as described above. You might be able to force to load
1494 the module, but it may result in hang-up. Hence, make sure that
1495 you load this module *before* X if you encounter this kind of
1501 Module for Yamaha OPL3-SA2/SA3 sound cards.
1503 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1505 with isapnp=0, the following options are available:
1507 port - control port # for OPL3-SA chip (0x370)
1508 sb_port - SB port # for OPL3-SA chip (0x220,0x240)
1509 wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1510 midi_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1511 fm_port - FM port # for OPL3-SA chip (0x388), -1 = disable
1512 irq - IRQ # for OPL3-SA chip (5,7,9,10)
1513 dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
1514 dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1516 This module supports multiple cards and ISA PnP. It does not support
1517 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1519 The power-management is supported.
1521 Module snd-opti92x-ad1848
1522 -------------------------
1524 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1525 Module works with OAK Mozart cards as well.
1527 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1529 with isapnp=0, the following options are available:
1531 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1532 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1533 fm_port - port # for OPL3 device (0x388)
1534 irq - IRQ # for WSS chip (5,7,9,10,11)
1535 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1536 dma1 - first DMA # for WSS chip (0,1,3)
1538 This module supports only one card, autoprobe and PnP.
1540 Module snd-opti92x-cs4231
1541 -------------------------
1543 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1545 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1547 with isapnp=0, the following options are available:
1549 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1550 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1551 fm_port - port # for OPL3 device (0x388)
1552 irq - IRQ # for WSS chip (5,7,9,10,11)
1553 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1554 dma1 - first DMA # for WSS chip (0,1,3)
1555 dma2 - second DMA # for WSS chip (0,1,3)
1557 This module supports only one card, autoprobe and PnP.
1562 Module for sound cards based on OPTi 82c93x chips.
1564 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1566 with isapnp=0, the following options are available:
1568 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1569 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1570 fm_port - port # for OPL3 device (0x388)
1571 irq - IRQ # for WSS chip (5,7,9,10,11)
1572 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1573 dma1 - first DMA # for WSS chip (0,1,3)
1574 dma2 - second DMA # for WSS chip (0,1,3)
1576 This module supports only one card, autoprobe and PnP.
1581 Module for sound cards based on the C-Media CMI8788 chip:
1583 * AuzenTech X-Meridian
1585 * Club3D Theatron DTS
1587 * Razer Barracuda AC-1
1590 This module supports autoprobe and multiple cards.
1592 Power management is _not_ supported.
1597 Module for Digigram PCXHR boards
1599 This module supports multiple cards.
1601 Module snd-portman2x4
1602 ---------------------
1604 Module for Midiman Portman 2x4 parallel port MIDI interface
1606 This module supports multiple cards.
1608 Module snd-powermac (on ppc only)
1609 ---------------------------------
1611 Module for PowerMac, iMac and iBook on-board soundchips
1613 enable_beep - enable beep using PCM (enabled as default)
1615 Module supports autoprobe a chip.
1617 Note: the driver may have problems regarding endianess.
1619 The power-management is supported.
1621 Module snd-pxa2xx-ac97 (on arm only)
1622 ------------------------------------
1624 Module for AC97 driver for the Intel PXA2xx chip
1626 For ARM architecture only.
1628 The power-management is supported.
1633 Module for Conexant Riptide chip
1635 joystick_port - Joystick port # (default: 0x200)
1636 mpu_port - MPU401 port # (default: 0x330)
1637 opl3_port - OPL3 port # (default: 0x388)
1639 This module supports multiple cards.
1640 The driver requires the firmware loader support on kernel.
1641 You need to install the firmware file "riptide.hex" to the standard
1642 firmware path (e.g. /lib/firmware).
1647 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1648 Prodif96 and Prodif Gold) sound cards.
1650 This module supports multiple cards.
1655 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1657 This module supports multiple cards.
1662 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1664 precise_ptr - Enable precise pointer (doesn't work reliably).
1667 This module supports multiple cards.
1669 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1670 module did formerly. It will allocate the buffers in advance
1671 when any RME9652 cards are found. To make the buffer
1672 allocation sure, load snd-page-alloc module in the early
1673 stage of boot sequence. See "Early Buffer Allocation"
1676 Module snd-sa11xx-uda1341 (on arm only)
1677 ---------------------------------------
1679 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1681 Module supports only one card.
1682 Module has no enable and index options.
1684 The power-management is supported.
1689 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0,
1693 port - port # for SB DSP chip (0x220,0x240,0x260)
1694 irq - IRQ # for SB DSP chip (5,7,9,10)
1695 dma8 - DMA # for SB DSP chip (1,3)
1697 This module supports multiple cards and autoprobe.
1699 The power-management is supported.
1701 Module snd-sb16 and snd-sbawe
1702 -----------------------------
1704 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1705 SoundBlaster AWE 32 (PnP),
1706 SoundBlaster AWE 64 PnP
1708 mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1709 csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
1710 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1712 with isapnp=0, the following options are available:
1714 port - port # for SB DSP 4.x chip (0x220,0x240,0x260)
1715 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1716 awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660)
1717 (snd-sbawe module only)
1718 irq - IRQ # for SB DSP 4.x chip (5,7,9,10)
1719 dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3)
1720 dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7)
1722 This module supports multiple cards, autoprobe and ISA PnP.
1724 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
1725 disable 16bit DMA with dma16 = -1 module parameter.
1726 Also, all Sound Blaster 16 type cards can operate in 16-bit
1727 half duplex mode through 8-bit DMA channel by disabling their
1730 The power-management is supported.
1735 Module for Gallant SC-6000 soundcard.
1737 port - Port # (0x220 or 0x240)
1738 mss_port - MSS Port # (0x530 or 0xe80)
1739 irq - IRQ # (5,7,9,10,11)
1740 mpu_irq - MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
1743 This module supports multiple cards.
1745 This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
1750 Module for Aztech Sound Galaxy sound card.
1752 sbport - Port # for SB16 interface (0x220,0x240)
1753 wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
1754 irq - IRQ # (7,9,10,11)
1757 This module supports multiple cards.
1759 The power-management is supported.
1764 Module for ENSONIQ SoundScape PnP cards.
1766 port - Port # (PnP setup)
1767 wss_port - WSS Port # (PnP setup)
1768 irq - IRQ # (PnP setup)
1769 mpu_irq - MPU-401 IRQ # (PnP setup)
1770 dma - DMA # (PnP setup)
1771 dma2 - 2nd DMA # (PnP setup, -1 to disable)
1773 This module supports multiple cards. ISA PnP must be enabled.
1774 You need sscape_ctl tool in alsa-tools package for loading
1777 Module snd-sun-amd7930 (on sparc only)
1778 --------------------------------------
1780 Module for AMD7930 sound chips found on Sparcs.
1782 This module supports multiple cards.
1784 Module snd-sun-cs4231 (on sparc only)
1785 -------------------------------------
1787 Module for CS4231 sound chips found on Sparcs.
1789 This module supports multiple cards.
1791 Module snd-sun-dbri (on sparc only)
1792 -----------------------------------
1794 Module for DBRI sound chips found on Sparcs.
1796 This module supports multiple cards.
1798 Module snd-wavefront
1799 --------------------
1801 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
1803 use_cs4232_midi - Use CS4232 MPU-401 interface
1804 (inaccessibly located inside your computer)
1805 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1807 with isapnp=0, the following options are available:
1809 cs4232_pcm_port - Port # for CS4232 PCM interface.
1810 cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
1811 cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
1812 cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
1813 ics2115_port - Port # for ICS2115
1814 ics2115_irq - IRQ # for ICS2115
1815 fm_port - FM OPL-3 Port #
1816 dma1 - DMA1 # for CS4232 PCM interface.
1817 dma2 - DMA2 # for CS4232 PCM interface.
1819 The below are options for wavefront_synth features:
1820 wf_raw - Assume that we need to boot the OS (default:no)
1821 If yes, then during driver loading, the state of the board is
1822 ignored, and we reset the board and load the firmware anyway.
1823 fx_raw - Assume that the FX process needs help (default:yes)
1824 If false, we'll leave the FX processor in whatever state it is
1825 when the driver is loaded. The default is to download the
1826 microprogram and associated coefficients to set it up for
1827 "default" operation, whatever that means.
1828 debug_default - Debug parameters for card initialization
1829 wait_usecs - How long to wait without sleeping, usecs
1831 This magic number seems to give pretty optimal throughput
1832 based on my limited experimentation.
1833 If you want to play around with it and find a better value, be
1834 my guest. Remember, the idea is to get a number that causes us
1835 to just busy wait for as many WaveFront commands as possible,
1836 without coming up with a number so large that we hog the whole
1838 Specifically, with this number, out of about 134,000 status
1839 waits, only about 250 result in a sleep.
1840 sleep_interval - How long to sleep when waiting for reply
1842 sleep_tries - How many times to try sleeping during a wait
1844 ospath - Pathname to processed ICS2115 OS firmware
1845 (default:wavefront.os)
1846 The path name of the ISC2115 OS firmware. In the recent
1847 version, it's handled via firmware loader framework, so it
1848 must be installed in the proper path, typically,
1850 reset_time - How long to wait for a reset to take effect
1852 ramcheck_time - How many seconds to wait for the RAM test
1854 osrun_time - How many seconds to wait for the ICS2115 OS
1857 This module supports multiple cards and ISA PnP.
1859 Note: the firmware file "wavefront.os" was located in the earlier
1860 version in /etc. Now it's loaded via firmware loader, and
1861 must be in the proper firmware path, such as /lib/firmware.
1862 Copy (or symlink) the file appropriately if you get an error
1863 regarding firmware downloading after upgrading the kernel.
1865 Module snd-sonicvibes
1866 ---------------------
1868 Module for S3 SonicVibes PCI sound cards.
1869 * PINE Schubert 32 PCI
1871 reverb - Reverb Enable - 1 = enable, 0 = disable (default)
1872 - SoundCard must have onboard SRAM for this.
1873 mge - Mic Gain Enable - 1 = enable, 0 = disable (default)
1875 This module supports multiple cards and autoprobe.
1877 Module snd-serial-u16550
1878 ------------------------
1880 Module for UART16550A serial MIDI ports.
1882 port - port # for UART16550A chip
1883 irq - IRQ # for UART16550A chip, -1 = poll mode
1884 speed - speed in bauds (9600,19200,38400,57600,115200)
1886 base - base for divisor in bauds (57600,115200,230400,460800)
1888 outs - number of MIDI ports in a serial port (1-4)
1890 adaptor - Type of adaptor.
1891 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
1892 3 = MS-124W M/B, 4 = Generic
1894 This module supports multiple cards. This module does not support autoprobe
1895 thus the main port must be specified!!! Other options are optional.
1900 Module for Trident 4DWave DX/NX sound cards.
1901 * Best Union Miss Melody 4DWave PCI
1903 * Warpspeed ONSpeed 4DWave PCI
1906 * CHIC True Sound 4Dwave
1907 * Shark Predator4D-PCI
1908 * Jaton SonicWave 4D
1910 pcm_channels - max channels (voices) reserved for PCM
1911 wavetable_size - max wavetable size in kB (4-?kb)
1913 This module supports multiple cards and autoprobe.
1915 The power-management is supported.
1917 Module snd-usb-audio
1918 --------------------
1920 Module for USB audio and USB MIDI devices.
1922 vid - Vendor ID for the device (optional)
1923 pid - Product ID for the device (optional)
1924 device_setup - Device specific magic number (optional)
1925 - Influence depends on the device
1928 This module supports multiple devices, autoprobe and hotplugging.
1930 Module snd-usb-caiaq
1931 --------------------
1933 Module for caiaq UB audio interfaces,
1934 * Native Instruments RigKontrol2
1935 * Native Instruments Kore Controller
1936 * Native Instruments Audio Kontrol 1
1937 * Native Instruments Audio 8 DJ
1939 This module supports multiple devices, autoprobe and hotplugging.
1941 Module snd-usb-usx2y
1942 --------------------
1944 Module for Tascam USB US-122, US-224 and US-428 devices.
1946 This module supports multiple devices, autoprobe and hotplugging.
1948 Note: you need to load the firmware via usx2yloader utility included
1949 in alsa-tools and alsa-firmware packages.
1954 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
1955 8233A, 8233C, 8235, 8237 (south) bridge.
1957 mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
1959 joystick - Enable joystick (default off) [VIA686A/686B only]
1960 ac97_clock - AC'97 codec clock base (default 48000Hz)
1961 dxs_support - support DXS channels,
1962 0 = auto (default), 1 = enable, 2 = disable,
1963 3 = 48k only, 4 = no VRA, 5 = enable any sample
1964 rate and different sample rates on different
1966 [VIA8233/C, 8235, 8237 only]
1967 ac97_quirk - AC'97 workaround for strange hardware
1968 See "AC97 Quirk Option" section below.
1970 This module supports one chip and autoprobe.
1972 Note: on some SMP motherboards like MSI 694D the interrupts might
1973 not be generated properly. In such a case, please try to
1974 set the SMP (or MPS) version on BIOS to 1.1 instead of
1975 default value 1.4. Then the interrupt number will be
1976 assigned under 15. You might also upgrade your BIOS.
1978 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
1979 channels as the first PCM. On these channels, up to 4
1980 streams can be played at the same time, and the controller
1981 can perform sample rate conversion with separate rates for
1983 As default (dxs_support = 0), 48k fixed rate is chosen
1984 except for the known devices since the output is often
1985 noisy except for 48k on some mother boards due to the
1987 Please try once dxs_support=5 and if it works on other
1988 sample rates (e.g. 44.1kHz of mp3 playback), please let us
1989 know the PCI subsystem vendor/device id's (output of
1991 If dxs_support=5 does not work, try dxs_support=4; if it
1992 doesn't work too, try dxs_support=1. (dxs_support=1 is
1993 usually for old motherboards. The correct implemented
1994 board should work with 4 or 5.) If it still doesn't
1995 work and the default setting is ok, dxs_support=3 is the
1996 right choice. If the default setting doesn't work at all,
1997 try dxs_support=2 to disable the DXS channels.
1998 In any cases, please let us know the result and the
1999 subsystem vendor/device ids. See "Links and Addresses"
2002 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
2003 additionally. The mpu_port option is for VIA686 chips only.
2005 The power-management is supported.
2007 Module snd-via82xx-modem
2008 ------------------------
2010 Module for VIA82xx AC97 modem
2012 ac97_clock - AC'97 codec clock base (default 48000Hz)
2014 This module supports one card and autoprobe.
2016 Note: The default index value of this module is -2, i.e. the first
2019 The power-management is supported.
2024 Module for virtual rawmidi devices.
2025 This module creates virtual rawmidi devices which communicate
2026 to the corresponding ALSA sequencer ports.
2028 midi_devs - MIDI devices # (1-4, default=4)
2030 This module supports multiple cards.
2035 Module for sound cards based on the Asus AV200 chip, i.e.,
2036 Xonar D2 and Xonar D2X.
2038 This module supports autoprobe and multiple cards.
2040 Power management is _not_ supported.
2045 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
2047 mic - Enable Microphone on V222 Mic (NYI)
2048 ibl - Capture IBL size. (default = 0, minimum size)
2050 This module supports multiple cards.
2052 When the driver is compiled as a module and the hotplug firmware
2053 is supported, the firmware data is loaded via hotplug automatically.
2054 Install the necessary firmware files in alsa-firmware package.
2055 When no hotplug fw loader is available, you need to load the
2056 firmware via vxloader utility in alsa-tools package. To invoke
2057 vxloader automatically, add the following to /etc/modprobe.conf
2059 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader
2061 (for 2.2/2.4 kernels, add "post-install /usr/bin/vxloader" to
2062 /etc/modules.conf, instead.)
2063 IBL size defines the interrupts period for PCM. The smaller size
2064 gives smaller latency but leads to more CPU consumption, too.
2065 The size is usually aligned to 126. As default (=0), the smallest
2066 size is chosen. The possible IBL values can be found in
2067 /proc/asound/cardX/vx-status proc file.
2069 The power-management is supported.
2074 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
2076 ibl - Capture IBL size. (default = 0, minimum size)
2078 This module supports multiple cards. The module is compiled only when
2079 PCMCIA is supported on kernel.
2081 With the older 2.6.x kernel, to activate the driver via the card
2082 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
2083 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
2084 longer require a config file.
2086 When the driver is compiled as a module and the hotplug firmware
2087 is supported, the firmware data is loaded via hotplug automatically.
2088 Install the necessary firmware files in alsa-firmware package.
2089 When no hotplug fw loader is available, you need to load the
2090 firmware via vxloader utility in alsa-tools package.
2092 About capture IBL, see the description of snd-vx222 module.
2094 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
2097 The power-management is supported.
2102 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
2104 mpu_port - 0x300,0x330,0x332,0x334, 0 (disable) by default,
2105 1 (auto-detect for YMF744/754 only)
2106 fm_port - 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2107 1 (auto-detect for YMF744/754 only)
2108 joystick_port - 0x201,0x202,0x204,0x205, 0 (disable) by default,
2110 rear_switch - enable shared rear/line-in switch (bool)
2112 This module supports autoprobe and multiple chips.
2114 The power-management is supported.
2116 Module snd-pdaudiocf
2117 --------------------
2119 Module for Sound Core PDAudioCF sound card.
2121 The power-management is supported.
2127 The ac97_quirk option is used to enable/override the workaround for
2128 specific devices on drivers for on-board AC'97 controllers like
2129 snd-intel8x0. Some hardware have swapped output pins between Master
2130 and Headphone, or Surround (thanks to confusion of AC'97
2131 specifications from version to version :-)
2133 The driver provides the auto-detection of known problematic devices,
2134 but some might be unknown or wrongly detected. In such a case, pass
2135 the proper value with this option.
2137 The following strings are accepted:
2138 - default Don't override the default setting
2139 - none Disable the quirk
2140 - hp_only Bind Master and Headphone controls as a single control
2141 - swap_hp Swap headphone and master controls
2142 - swap_surround Swap master and surround controls
2143 - ad_sharing For AD1985, turn on OMS bit and use headphone
2144 - alc_jack For ALC65x, turn on the jack sense mode
2145 - inv_eapd Inverted EAPD implementation
2146 - mute_led Bind EAPD bit for turning on/off mute LED
2148 For backward compatibility, the corresponding integer value -1, 0,
2149 ... are accepted, too.
2151 For example, if "Master" volume control has no effect on your device
2152 but only "Headphone" does, pass ac97_quirk=hp_only module option.
2155 Configuring Non-ISAPNP Cards
2156 ============================
2158 When the kernel is configured with ISA-PnP support, the modules
2159 supporting the isapnp cards will have module options "isapnp".
2160 If this option is set, *only* the ISA-PnP devices will be probed.
2161 For probing the non ISA-PnP cards, you have to pass "isapnp=0" option
2162 together with the proper i/o and irq configuration.
2164 When the kernel is configured without ISA-PnP support, isapnp option
2165 will be not built in.
2168 Module Autoloading Support
2169 ==========================
2171 The ALSA drivers can be loaded automatically on demand by defining
2172 module aliases. The string 'snd-card-%1' is requested for ALSA native
2173 devices where %i is sound card number from zero to seven.
2175 To auto-load an ALSA driver for OSS services, define the string
2176 'sound-slot-%i' where %i means the slot number for OSS, which
2177 corresponds to the card index of ALSA. Usually, define this
2178 as the same card module.
2180 An example configuration for a single emu10k1 card is like below:
2181 ----- /etc/modprobe.conf
2182 alias snd-card-0 snd-emu10k1
2183 alias sound-slot-0 snd-emu10k1
2184 ----- /etc/modprobe.conf
2186 The available number of auto-loaded sound cards depends on the module
2187 option "cards_limit" of snd module. As default it's set to 1.
2188 To enable the auto-loading of multiple cards, specify the number of
2189 sound cards in that option.
2191 When multiple cards are available, it'd better to specify the index
2192 number for each card via module option, too, so that the order of
2193 cards is kept consistent.
2195 An example configuration for two sound cards is like below:
2197 ----- /etc/modprobe.conf
2199 options snd cards_limit=2
2200 alias snd-card-0 snd-interwave
2201 alias snd-card-1 snd-ens1371
2202 options snd-interwave index=0
2203 options snd-ens1371 index=1
2205 alias sound-slot-0 snd-interwave
2206 alias sound-slot-1 snd-ens1371
2207 ----- /etc/modprobe.conf
2209 In this example, the interwave card is always loaded as the first card
2210 (index 0) and ens1371 as the second (index 1).
2212 Alternative (and new) way to fixate the slot assignment is to use
2213 "slots" option of snd module. In the case above, specify like the
2216 options snd slots=snd-interwave,snd-ens1371
2218 Then, the first slot (#0) is reserved for snd-interwave driver, and
2219 the second (#1) for snd-ens1371. You can omit index option in each
2220 driver if slots option is used (although you can still have them at
2221 the same time as long as they don't conflict).
2223 The slots option is especially useful for avoiding the possible
2224 hot-plugging and the resultant slot conflict. For example, in the
2225 case above again, the first two slots are already reserved. If any
2226 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2227 snd-ens1371, it will be assigned to the third or later slot.
2230 ALSA PCM devices to OSS devices mapping
2231 =======================================
2233 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2234 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2235 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2236 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2237 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2238 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2239 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2240 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2241 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2243 The first number from /dev/snd/pcmC{X}D{Y}[c|p] expression means
2244 sound card number and second means device number. The ALSA devices
2245 have either 'c' or 'p' suffix indicating the direction, capture and
2246 playback, respectively.
2248 Please note that the device mapping above may be varied via the module
2249 options of snd-pcm-oss module.
2252 Proc interfaces (/proc/asound)
2253 ==============================
2255 /proc/asound/card#/pcm#[cp]/oss
2256 -------------------------------
2257 String "erase" - erase all additional informations about OSS applications
2258 String "<app_name> <fragments> <fragment_size> [<options>]"
2260 <app_name> - name of application with (higher priority) or without path
2261 <fragments> - number of fragments or zero if auto
2262 <fragment_size> - size of fragment in bytes or zero if auto
2263 <options> - optional parameters
2264 - disable the application tries to open a pcm device for
2265 this channel but does not want to use it.
2266 (Cause a bug or mmap needs)
2267 It's good for Quake etc...
2268 - direct don't use plugins
2269 - block force block mode (rvplayer)
2270 - non-block force non-block mode
2271 - whole-frag write only whole fragments (optimization affecting
2273 - no-silence do not fill silence ahead to avoid clicks
2274 - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl
2275 instead of filled blocks
2277 Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2278 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2279 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2282 Early Buffer Allocation
2283 =======================
2285 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2286 sometimes it's too late to find such spaces when the driver module is
2287 actually loaded due to memory fragmentation. You can pre-allocate the
2288 PCM buffers by loading snd-page-alloc module and write commands to its
2289 proc file in prior, for example, in the early boot stage like
2290 /etc/init.d/*.local scripts.
2292 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2293 usage of page allocation. In writing, you can send the following
2294 commands to the snd-page-alloc driver:
2296 - add VENDOR DEVICE MASK SIZE BUFFERS
2298 VENDOR and DEVICE are PCI vendor and device IDs. They take
2299 integer numbers (0x prefix is needed for the hex).
2300 MASK is the PCI DMA mask. Pass 0 if not restricted.
2301 SIZE is the size of each buffer to allocate. You can pass
2302 k and m suffix for KB and MB. The max number is 16MB.
2303 BUFFERS is the number of buffers to allocate. It must be greater
2304 than 0. The max number is 4.
2308 This will erase the all pre-allocated buffers which are not in
2315 ALSA project homepage
2316 http://www.alsa-project.org
2318 ALSA Bug Tracking System
2319 https://bugtrack.alsa-project.org/bugs/
2322 mailto:alsa-devel@alsa-project.org
projects / linux-beck.git / blob