]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/alpha/kernel/ptrace.c
Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6
[karo-tx-linux.git] / arch / alpha / kernel / ptrace.c
1 /* ptrace.c */
2 /* By Ross Biro 1/23/92 */
3 /* edited by Linus Torvalds */
4 /* mangled further by Bob Manson (manson@santafe.edu) */
5 /* more mutilation by David Mosberger (davidm@azstarnet.com) */
6
7 #include <linux/kernel.h>
8 #include <linux/sched.h>
9 #include <linux/mm.h>
10 #include <linux/smp.h>
11 #include <linux/errno.h>
12 #include <linux/ptrace.h>
13 #include <linux/user.h>
14 #include <linux/security.h>
15 #include <linux/signal.h>
16
17 #include <asm/uaccess.h>
18 #include <asm/pgtable.h>
19 #include <asm/fpu.h>
20
21 #include "proto.h"
22
23 #define DEBUG   DBG_MEM
24 #undef DEBUG
25
26 #ifdef DEBUG
27 enum {
28         DBG_MEM         = (1<<0),
29         DBG_BPT         = (1<<1),
30         DBG_MEM_ALL     = (1<<2)
31 };
32 #define DBG(fac,args)   {if ((fac) & DEBUG) printk args;}
33 #else
34 #define DBG(fac,args)
35 #endif
36
37 #define BREAKINST       0x00000080      /* call_pal bpt */
38
39 /*
40  * does not yet catch signals sent when the child dies.
41  * in exit.c or in signal.c.
42  */
43
44 /*
45  * Processes always block with the following stack-layout:
46  *
47  *  +================================+ <---- task + 2*PAGE_SIZE
48  *  | PALcode saved frame (ps, pc,   | ^
49  *  | gp, a0, a1, a2)                | |
50  *  +================================+ | struct pt_regs
51  *  |                                | |
52  *  | frame generated by SAVE_ALL    | |
53  *  |                                | v
54  *  +================================+
55  *  |                                | ^
56  *  | frame saved by do_switch_stack | | struct switch_stack
57  *  |                                | v
58  *  +================================+
59  */
60
61 /* 
62  * The following table maps a register index into the stack offset at
63  * which the register is saved.  Register indices are 0-31 for integer
64  * regs, 32-63 for fp regs, and 64 for the pc.  Notice that sp and
65  * zero have no stack-slot and need to be treated specially (see
66  * get_reg/put_reg below).
67  */
68 enum {
69         REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
70 };
71
72 #define PT_REG(reg) \
73   (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
74
75 #define SW_REG(reg) \
76  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
77   + offsetof(struct switch_stack, reg))
78
79 static int regoff[] = {
80         PT_REG(    r0), PT_REG(    r1), PT_REG(    r2), PT_REG(   r3),
81         PT_REG(    r4), PT_REG(    r5), PT_REG(    r6), PT_REG(   r7),
82         PT_REG(    r8), SW_REG(    r9), SW_REG(   r10), SW_REG(  r11),
83         SW_REG(   r12), SW_REG(   r13), SW_REG(   r14), SW_REG(  r15),
84         PT_REG(   r16), PT_REG(   r17), PT_REG(   r18), PT_REG(  r19),
85         PT_REG(   r20), PT_REG(   r21), PT_REG(   r22), PT_REG(  r23),
86         PT_REG(   r24), PT_REG(   r25), PT_REG(   r26), PT_REG(  r27),
87         PT_REG(   r28), PT_REG(    gp),            -1,             -1,
88         SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
89         SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
90         SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
91         SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
92         SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
93         SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
94         SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
95         SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
96         PT_REG(    pc)
97 };
98
99 static unsigned long zero;
100
101 /*
102  * Get address of register REGNO in task TASK.
103  */
104 static unsigned long *
105 get_reg_addr(struct task_struct * task, unsigned long regno)
106 {
107         unsigned long *addr;
108
109         if (regno == 30) {
110                 addr = &task_thread_info(task)->pcb.usp;
111         } else if (regno == 65) {
112                 addr = &task_thread_info(task)->pcb.unique;
113         } else if (regno == 31 || regno > 65) {
114                 zero = 0;
115                 addr = &zero;
116         } else {
117                 addr = task_stack_page(task) + regoff[regno];
118         }
119         return addr;
120 }
121
122 /*
123  * Get contents of register REGNO in task TASK.
124  */
125 static unsigned long
126 get_reg(struct task_struct * task, unsigned long regno)
127 {
128         /* Special hack for fpcr -- combine hardware and software bits.  */
129         if (regno == 63) {
130                 unsigned long fpcr = *get_reg_addr(task, regno);
131                 unsigned long swcr
132                   = task_thread_info(task)->ieee_state & IEEE_SW_MASK;
133                 swcr = swcr_update_status(swcr, fpcr);
134                 return fpcr | swcr;
135         }
136         return *get_reg_addr(task, regno);
137 }
138
139 /*
140  * Write contents of register REGNO in task TASK.
141  */
142 static int
143 put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
144 {
145         if (regno == 63) {
146                 task_thread_info(task)->ieee_state
147                   = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK)
148                      | (data & IEEE_SW_MASK));
149                 data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
150         }
151         *get_reg_addr(task, regno) = data;
152         return 0;
153 }
154
155 static inline int
156 read_int(struct task_struct *task, unsigned long addr, int * data)
157 {
158         int copied = access_process_vm(task, addr, data, sizeof(int), 0);
159         return (copied == sizeof(int)) ? 0 : -EIO;
160 }
161
162 static inline int
163 write_int(struct task_struct *task, unsigned long addr, int data)
164 {
165         int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
166         return (copied == sizeof(int)) ? 0 : -EIO;
167 }
168
169 /*
170  * Set breakpoint.
171  */
172 int
173 ptrace_set_bpt(struct task_struct * child)
174 {
175         int displ, i, res, reg_b, nsaved = 0;
176         unsigned int insn, op_code;
177         unsigned long pc;
178
179         pc  = get_reg(child, REG_PC);
180         res = read_int(child, pc, (int *) &insn);
181         if (res < 0)
182                 return res;
183
184         op_code = insn >> 26;
185         if (op_code >= 0x30) {
186                 /*
187                  * It's a branch: instead of trying to figure out
188                  * whether the branch will be taken or not, we'll put
189                  * a breakpoint at either location.  This is simpler,
190                  * more reliable, and probably not a whole lot slower
191                  * than the alternative approach of emulating the
192                  * branch (emulation can be tricky for fp branches).
193                  */
194                 displ = ((s32)(insn << 11)) >> 9;
195                 task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
196                 if (displ)              /* guard against unoptimized code */
197                         task_thread_info(child)->bpt_addr[nsaved++]
198                           = pc + 4 + displ;
199                 DBG(DBG_BPT, ("execing branch\n"));
200         } else if (op_code == 0x1a) {
201                 reg_b = (insn >> 16) & 0x1f;
202                 task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b);
203                 DBG(DBG_BPT, ("execing jump\n"));
204         } else {
205                 task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
206                 DBG(DBG_BPT, ("execing normal insn\n"));
207         }
208
209         /* install breakpoints: */
210         for (i = 0; i < nsaved; ++i) {
211                 res = read_int(child, task_thread_info(child)->bpt_addr[i],
212                                (int *) &insn);
213                 if (res < 0)
214                         return res;
215                 task_thread_info(child)->bpt_insn[i] = insn;
216                 DBG(DBG_BPT, ("    -> next_pc=%lx\n",
217                               task_thread_info(child)->bpt_addr[i]));
218                 res = write_int(child, task_thread_info(child)->bpt_addr[i],
219                                 BREAKINST);
220                 if (res < 0)
221                         return res;
222         }
223         task_thread_info(child)->bpt_nsaved = nsaved;
224         return 0;
225 }
226
227 /*
228  * Ensure no single-step breakpoint is pending.  Returns non-zero
229  * value if child was being single-stepped.
230  */
231 int
232 ptrace_cancel_bpt(struct task_struct * child)
233 {
234         int i, nsaved = task_thread_info(child)->bpt_nsaved;
235
236         task_thread_info(child)->bpt_nsaved = 0;
237
238         if (nsaved > 2) {
239                 printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
240                 nsaved = 2;
241         }
242
243         for (i = 0; i < nsaved; ++i) {
244                 write_int(child, task_thread_info(child)->bpt_addr[i],
245                           task_thread_info(child)->bpt_insn[i]);
246         }
247         return (nsaved != 0);
248 }
249
250 void user_enable_single_step(struct task_struct *child)
251 {
252         /* Mark single stepping.  */
253         task_thread_info(child)->bpt_nsaved = -1;
254 }
255
256 void user_disable_single_step(struct task_struct *child)
257 {
258         ptrace_cancel_bpt(child);
259 }
260
261 /*
262  * Called by kernel/ptrace.c when detaching..
263  *
264  * Make sure the single step bit is not set.
265  */
266 void ptrace_disable(struct task_struct *child)
267
268         user_disable_single_step(child);
269 }
270
271 long arch_ptrace(struct task_struct *child, long request,
272                  unsigned long addr, unsigned long data)
273 {
274         unsigned long tmp;
275         size_t copied;
276         long ret;
277
278         switch (request) {
279         /* When I and D space are separate, these will need to be fixed.  */
280         case PTRACE_PEEKTEXT: /* read word at location addr. */
281         case PTRACE_PEEKDATA:
282                 copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
283                 ret = -EIO;
284                 if (copied != sizeof(tmp))
285                         break;
286                 
287                 force_successful_syscall_return();
288                 ret = tmp;
289                 break;
290
291         /* Read register number ADDR. */
292         case PTRACE_PEEKUSR:
293                 force_successful_syscall_return();
294                 ret = get_reg(child, addr);
295                 DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
296                 break;
297
298         /* When I and D space are separate, this will have to be fixed.  */
299         case PTRACE_POKETEXT: /* write the word at location addr. */
300         case PTRACE_POKEDATA:
301                 ret = generic_ptrace_pokedata(child, addr, data);
302                 break;
303
304         case PTRACE_POKEUSR: /* write the specified register */
305                 DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
306                 ret = put_reg(child, addr, data);
307                 break;
308         default:
309                 ret = ptrace_request(child, request, addr, data);
310                 break;
311         }
312         return ret;
313 }
314
315 asmlinkage void
316 syscall_trace(void)
317 {
318         if (!test_thread_flag(TIF_SYSCALL_TRACE))
319                 return;
320         if (!(current->ptrace & PT_PTRACED))
321                 return;
322         /* The 0x80 provides a way for the tracing parent to distinguish
323            between a syscall stop and SIGTRAP delivery */
324         ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
325                                  ? 0x80 : 0));
326
327         /*
328          * This isn't the same as continuing with a signal, but it will do
329          * for normal use.  strace only continues with a signal if the
330          * stopping signal is not SIGTRAP.  -brl
331          */
332         if (current->exit_code) {
333                 send_sig(current->exit_code, current, 1);
334                 current->exit_code = 0;
335         }
336 }