2 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License version 2 as
6 # published by the Free Software Foundation.
11 select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
12 select BUILDTIME_EXTABLE_SORT
14 select CLONE_BACKWARDS
16 select GENERIC_ATOMIC64
17 select GENERIC_CLOCKEVENTS
18 select GENERIC_FIND_FIRST_BIT
19 # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
20 select GENERIC_IRQ_SHOW
21 select GENERIC_PCI_IOMAP
22 select GENERIC_PENDING_IRQ if SMP
23 select GENERIC_SMP_IDLE_THREAD
25 select HAVE_ARCH_TRACEHOOK
26 select HAVE_FUTEX_CMPXCHG
27 select HAVE_IOREMAP_PROT
29 select HAVE_KRETPROBES
31 select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
33 select HAVE_PERF_EVENTS
34 select HANDLE_DOMAIN_IRQ
36 select MODULES_USE_ELF_RELA
39 select OF_EARLY_FLATTREE
40 select OF_RESERVED_MEM
41 select PERF_USE_VMALLOC
42 select HAVE_DEBUG_STACKOVERFLOW
43 select HAVE_GENERIC_DMA_COHERENT
48 config TRACE_IRQFLAGS_SUPPORT
51 config LOCKDEP_SUPPORT
54 config SCHED_OMIT_FRAME_POINTER
60 config RWSEM_GENERIC_SPINLOCK
63 config ARCH_DISCONTIGMEM_ENABLE
66 config ARCH_FLATMEM_ENABLE
75 config GENERIC_CALIBRATE_DELAY
78 config GENERIC_HWEIGHT
81 config STACKTRACE_SUPPORT
85 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
90 source "kernel/Kconfig.freezer"
92 menu "ARC Architecture Configuration"
94 menu "ARC Platform/SoC/Board"
96 source "arch/arc/plat-sim/Kconfig"
97 source "arch/arc/plat-tb10x/Kconfig"
98 source "arch/arc/plat-axs10x/Kconfig"
99 #New platform adds here
100 source "arch/arc/plat-eznps/Kconfig"
105 prompt "ARC Instruction Set"
106 default ISA_ARCOMPACT
110 select CPU_NO_EFFICIENT_FFS
112 The original ARC ISA of ARC600/700 cores
117 ISA for the Next Generation ARC-HS cores
121 menu "ARC CPU Configuration"
125 default ARC_CPU_770 if ISA_ARCOMPACT
126 default ARC_CPU_HS if ISA_ARCV2
134 Support for ARC750 core
140 Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
141 This core has a bunch of cool new features:
142 -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
143 Shared Address Spaces (for sharing TLB entires in MMU)
144 -Caches: New Prog Model, Region Flush
145 -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
153 Support for ARC HS38x Cores based on ARCv2 ISA
154 The notable features are:
155 - SMP configurations of upto 4 core with coherency
156 - Optional L2 Cache and IO-Coherency
157 - Revised Interrupt Architecture (multiple priorites, reg banks,
158 auto stack switch, auto regfile save/restore)
159 - MMUv4 (PIPT dcache, Huge Pages)
161 * 64bit load/store: LDD, STD
162 * Hardware assisted divide/remainder: DIV, REM
163 * Function prologue/epilogue: ENTER_S, LEAVE_S
164 * IRQ enable/disable: CLRI, SETI
165 * pop count: FFS, FLS
166 * SETcc, BMSKN, XBFU...
170 config CPU_BIG_ENDIAN
171 bool "Enable Big Endian Mode"
174 Build kernel for Big Endian Mode of ARC CPU
177 bool "Symmetric Multi-Processing"
179 select ARC_HAS_COH_CACHES if ISA_ARCV2
180 select ARC_MCIP if ISA_ARCV2
182 This enables support for systems with more than one CPU.
186 config ARC_HAS_COH_CACHES
190 bool "ARConnect Multicore IP (MCIP) Support "
193 This IP block enables SMP in ARC-HS38 cores.
194 It provides for cross-core interrupts, multi-core debug
195 hardware semaphores, shared memory,....
198 int "Maximum number of CPUs (2-4096)"
202 config ARC_SMP_HALT_ON_RESET
203 bool "Enable Halt-on-reset boot mode"
204 default y if ARC_UBOOT_SUPPORT
206 In SMP configuration cores can be configured as Halt-on-reset
207 or they could all start at same time. For Halt-on-reset, non
208 masters are parked until Master kicks them so they can start of
209 at designated entry point. For other case, all jump to common
210 entry point and spin wait for Master's signal.
215 bool "Enable Cache Support"
217 # if SMP, cache enabled ONLY if ARC implementation has cache coherency
218 depends on !SMP || ARC_HAS_COH_CACHES
222 config ARC_CACHE_LINE_SHIFT
223 int "Cache Line Length (as power of 2)"
227 Starting with ARC700 4.9, Cache line length is configurable,
228 This option specifies "N", with Line-len = 2 power N
229 So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
230 Linux only supports same line lengths for I and D caches.
232 config ARC_HAS_ICACHE
233 bool "Use Instruction Cache"
236 config ARC_HAS_DCACHE
237 bool "Use Data Cache"
240 config ARC_CACHE_PAGES
241 bool "Per Page Cache Control"
243 depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
245 This can be used to over-ride the global I/D Cache Enable on a
246 per-page basis (but only for pages accessed via MMU such as
247 Kernel Virtual address or User Virtual Address)
248 TLB entries have a per-page Cache Enable Bit.
249 Note that Global I/D ENABLE + Per Page DISABLE works but corollary
250 Global DISABLE + Per Page ENABLE won't work
252 config ARC_CACHE_VIPT_ALIASING
253 bool "Support VIPT Aliasing D$"
254 depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
262 Single Cycle RAMS to store Fast Path Code
266 int "ICCM Size in KB"
268 depends on ARC_HAS_ICCM
273 Single Cycle RAMS to store Fast Path Data
277 int "DCCM Size in KB"
279 depends on ARC_HAS_DCCM
282 hex "DCCM map address"
284 depends on ARC_HAS_DCCM
288 default ARC_MMU_V3 if ARC_CPU_770
289 default ARC_MMU_V2 if ARC_CPU_750D
290 default ARC_MMU_V4 if ARC_CPU_HS
302 Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
303 when 2 D-TLB and 1 I-TLB entries index into same 2way set.
307 depends on ARC_CPU_770
309 Introduced with ARC700 4.10: New Features
310 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
311 Shared Address Spaces (SASID)
323 prompt "MMU Page Size"
324 default ARC_PAGE_SIZE_8K
326 config ARC_PAGE_SIZE_8K
329 Choose between 8k vs 16k
331 config ARC_PAGE_SIZE_16K
333 depends on ARC_MMU_V3 || ARC_MMU_V4
335 config ARC_PAGE_SIZE_4K
337 depends on ARC_MMU_V3 || ARC_MMU_V4
342 prompt "MMU Super Page Size"
343 depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
344 default ARC_HUGEPAGE_2M
346 config ARC_HUGEPAGE_2M
349 config ARC_HUGEPAGE_16M
355 int "Maximum NUMA Nodes (as a power of 2)"
356 default "1" if !DISCONTIGMEM
357 default "2" if DISCONTIGMEM
358 depends on NEED_MULTIPLE_NODES
360 Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
365 config ARC_COMPACT_IRQ_LEVELS
366 bool "Setup Timer IRQ as high Priority"
368 # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
371 config ARC_FPU_SAVE_RESTORE
372 bool "Enable FPU state persistence across context switch"
375 Double Precision Floating Point unit had dedictaed regs which
376 need to be saved/restored across context-switch.
377 Note that ARC FPU is overly simplistic, unlike say x86, which has
378 hardware pieces to allow software to conditionally save/restore,
379 based on actual usage of FPU by a task. Thus our implemn does
380 this for all tasks in system.
388 bool "Insn: LLOCK/SCOND (efficient atomic ops)"
390 depends on !ARC_CANT_LLSC
393 bool "Insn: SWAPE (endian-swap)"
399 bool "Insn: 64bit LDD/STD"
401 Enable gcc to generate 64-bit load/store instructions
402 ISA mandates even/odd registers to allow encoding of two
403 dest operands with 2 possible source operands.
406 config ARC_HAS_DIV_REM
407 bool "Insn: div, divu, rem, remu"
411 bool "Local 64-bit r/o cycle counter"
416 bool "SMP synchronized 64-bit cycle counter"
420 config ARC_NUMBER_OF_INTERRUPTS
421 int "Number of interrupts"
425 This defines the number of interrupts on the ARCv2HS core.
426 It affects the size of vector table.
427 The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
428 in hardware, it keep things simple for Linux to assume they are always
433 endmenu # "ARC CPU Configuration"
435 config LINUX_LINK_BASE
436 hex "Linux Link Address"
439 ARC700 divides the 32 bit phy address space into two equal halves
440 -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
441 -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
442 Typically Linux kernel is linked at the start of untransalted addr,
443 hence the default value of 0x8zs.
444 However some customers have peripherals mapped at this addr, so
445 Linux needs to be scooted a bit.
446 If you don't know what the above means, leave this setting alone.
447 This needs to match memory start address specified in Device Tree
450 bool "High Memory Support"
451 select ARCH_DISCONTIGMEM_ENABLE
453 With ARC 2G:2G address split, only upper 2G is directly addressable by
454 kernel. Enable this to potentially allow access to rest of 2G and PAE
458 bool "Support for the 40-bit Physical Address Extension"
462 Enable access to physical memory beyond 4G, only supported on
463 ARC cores with 40 bit Physical Addressing support
465 config ARCH_PHYS_ADDR_T_64BIT
466 def_bool ARC_HAS_PAE40
468 config ARCH_DMA_ADDR_T_64BIT
471 config ARC_PLAT_NEEDS_PHYS_TO_DMA
474 config ARC_KVADDR_SIZE
475 int "Kernel Virtaul Address Space size (MB)"
479 The kernel address space is carved out of 256MB of translated address
480 space for catering to vmalloc, modules, pkmap, fixmap. This however may
481 not suffice vmalloc requirements of a 4K CPU EZChip system. So allow
482 this to be stretched to 512 MB (by extending into the reserved
485 config ARC_CURR_IN_REG
486 bool "Dedicate Register r25 for current_task pointer"
489 This reserved Register R25 to point to Current Task in
490 kernel mode. This saves memory access for each such access
493 config ARC_EMUL_UNALIGNED
494 bool "Emulate unaligned memory access (userspace only)"
496 select SYSCTL_ARCH_UNALIGN_NO_WARN
497 select SYSCTL_ARCH_UNALIGN_ALLOW
498 depends on ISA_ARCOMPACT
500 This enables misaligned 16 & 32 bit memory access from user space.
501 Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
502 potential bugs in code
505 int "Timer Frequency"
508 config ARC_METAWARE_HLINK
509 bool "Support for Metaware debugger assisted Host access"
512 This options allows a Linux userland apps to directly access
513 host file system (open/creat/read/write etc) with help from
514 Metaware Debugger. This can come in handy for Linux-host communication
515 when there is no real usable peripheral such as EMAC.
523 config ARC_DW2_UNWIND
524 bool "Enable DWARF specific kernel stack unwind"
528 Compiles the kernel with DWARF unwind information and can be used
529 to get stack backtraces.
531 If you say Y here the resulting kernel image will be slightly larger
532 but not slower, and it will give very useful debugging information.
533 If you don't debug the kernel, you can say N, but we may not be able
534 to solve problems without frame unwind information
536 config ARC_DBG_TLB_PARANOIA
537 bool "Paranoia Checks in Low Level TLB Handlers"
540 config ARC_DBG_TLB_MISS_COUNT
541 bool "Profile TLB Misses"
545 Counts number of I and D TLB Misses and exports them via Debugfs
546 The counters can be cleared via Debugfs as well
550 config ARC_UBOOT_SUPPORT
551 bool "Support uboot arg Handling"
554 ARC Linux by default checks for uboot provided args as pointers to
555 external cmdline or DTB. This however breaks in absence of uboot,
556 when booting from Metaware debugger directly, as the registers are
557 not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
558 registers look like uboot args to kernel which then chokes.
559 So only enable the uboot arg checking/processing if users are sure
560 of uboot being in play.
562 config ARC_BUILTIN_DTB_NAME
563 string "Built in DTB"
565 Set the name of the DTB to embed in the vmlinux binary
566 Leaving it blank selects the minimal "skeleton" dtb
568 source "kernel/Kconfig.preempt"
570 menu "Executable file formats"
571 source "fs/Kconfig.binfmt"
574 endmenu # "ARC Architecture Configuration"
578 config FORCE_MAX_ZONEORDER
579 int "Maximum zone order"
580 default "12" if ARC_HUGEPAGE_16M
584 source "drivers/Kconfig"
589 bool "PCI support" if MIGHT_HAVE_PCI
591 PCI is the name of a bus system, i.e., the way the CPU talks to
592 the other stuff inside your box. Find out if your board/platform
595 Note: PCIe support for Synopsys Device will be available only
596 when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
602 source "drivers/pci/Kconfig"
607 source "arch/arc/Kconfig.debug"
608 source "security/Kconfig"
609 source "crypto/Kconfig"
611 source "kernel/power/Kconfig"