4 select ARCH_CLOCKSOURCE_DATA
5 select ARCH_HAS_DEVMEM_IS_ALLOWED
6 select ARCH_HAS_ELF_RANDOMIZE
7 select ARCH_HAS_SET_MEMORY
8 select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
9 select ARCH_HAS_STRICT_MODULE_RWX if MMU
10 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
11 select ARCH_HAVE_CUSTOM_GPIO_H
12 select ARCH_HAS_GCOV_PROFILE_ALL
13 select ARCH_MIGHT_HAVE_PC_PARPORT
14 select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
15 select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
16 select ARCH_SUPPORTS_ATOMIC_RMW
17 select ARCH_USE_BUILTIN_BSWAP
18 select ARCH_USE_CMPXCHG_LOCKREF
19 select ARCH_WANT_IPC_PARSE_VERSION
20 select BUILDTIME_EXTABLE_SORT if MMU
21 select CLONE_BACKWARDS
22 select CPU_PM if (SUSPEND || CPU_IDLE)
23 select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
25 select EDAC_ATOMIC_SCRUB
26 select GENERIC_ALLOCATOR
27 select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
28 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
29 select GENERIC_EARLY_IOREMAP
30 select GENERIC_IDLE_POLL_SETUP
31 select GENERIC_IRQ_PROBE
32 select GENERIC_IRQ_SHOW
33 select GENERIC_IRQ_SHOW_LEVEL
34 select GENERIC_PCI_IOMAP
35 select GENERIC_SCHED_CLOCK
36 select GENERIC_SMP_IDLE_THREAD
37 select GENERIC_STRNCPY_FROM_USER
38 select GENERIC_STRNLEN_USER
39 select HANDLE_DOMAIN_IRQ
40 select HARDIRQS_SW_RESEND
41 select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
42 select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
43 select HAVE_ARCH_HARDENED_USERCOPY
44 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
45 select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
46 select HAVE_ARCH_MMAP_RND_BITS if MMU
47 select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
48 select HAVE_ARCH_TRACEHOOK
49 select HAVE_ARM_SMCCC if CPU_V7
51 select HAVE_CC_STACKPROTECTOR
52 select HAVE_CONTEXT_TRACKING
53 select HAVE_C_RECORDMCOUNT
54 select HAVE_DEBUG_KMEMLEAK
55 select HAVE_DMA_API_DEBUG
56 select HAVE_DMA_CONTIGUOUS if MMU
57 select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
58 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
59 select HAVE_EXIT_THREAD
60 select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
61 select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
62 select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
63 select HAVE_GCC_PLUGINS
64 select HAVE_GENERIC_DMA_COHERENT
65 select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
66 select HAVE_IDE if PCI || ISA || PCMCIA
67 select HAVE_IRQ_TIME_ACCOUNTING
68 select HAVE_KERNEL_GZIP
69 select HAVE_KERNEL_LZ4
70 select HAVE_KERNEL_LZMA
71 select HAVE_KERNEL_LZO
73 select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
74 select HAVE_KRETPROBES if (HAVE_KPROBES)
76 select HAVE_MOD_ARCH_SPECIFIC
78 select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
79 select HAVE_OPTPROBES if !THUMB2_KERNEL
80 select HAVE_PERF_EVENTS
82 select HAVE_PERF_USER_STACK_DUMP
83 select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
84 select HAVE_REGS_AND_STACK_ACCESS_API
85 select HAVE_SYSCALL_TRACEPOINTS
87 select HAVE_VIRT_CPU_ACCOUNTING_GEN
88 select IRQ_FORCED_THREADING
89 select MODULES_USE_ELF_REL
91 select OF_EARLY_FLATTREE if OF
92 select OF_RESERVED_MEM if OF
94 select OLD_SIGSUSPEND3
95 select PERF_USE_VMALLOC
97 select SYS_SUPPORTS_APM_EMULATION
98 # Above selects are sorted alphabetically; please add new ones
99 # according to that. Thanks.
101 The ARM series is a line of low-power-consumption RISC chip designs
102 licensed by ARM Ltd and targeted at embedded applications and
103 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
104 manufactured, but legacy ARM-based PC hardware remains popular in
105 Europe. There is an ARM Linux project with a web page at
106 <http://www.arm.linux.org.uk/>.
108 config ARM_HAS_SG_CHAIN
109 select ARCH_HAS_SG_CHAIN
112 config NEED_SG_DMA_LENGTH
115 config ARM_DMA_USE_IOMMU
117 select ARM_HAS_SG_CHAIN
118 select NEED_SG_DMA_LENGTH
122 config ARM_DMA_IOMMU_ALIGNMENT
123 int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
127 DMA mapping framework by default aligns all buffers to the smallest
128 PAGE_SIZE order which is greater than or equal to the requested buffer
129 size. This works well for buffers up to a few hundreds kilobytes, but
130 for larger buffers it just a waste of address space. Drivers which has
131 relatively small addressing window (like 64Mib) might run out of
132 virtual space with just a few allocations.
134 With this parameter you can specify the maximum PAGE_SIZE order for
135 DMA IOMMU buffers. Larger buffers will be aligned only to this
136 specified order. The order is expressed as a power of two multiplied
141 config MIGHT_HAVE_PCI
144 config SYS_SUPPORTS_APM_EMULATION
149 select GENERIC_ALLOCATOR
160 The Extended Industry Standard Architecture (EISA) bus was
161 developed as an open alternative to the IBM MicroChannel bus.
163 The EISA bus provided some of the features of the IBM MicroChannel
164 bus while maintaining backward compatibility with cards made for
165 the older ISA bus. The EISA bus saw limited use between 1988 and
166 1995 when it was made obsolete by the PCI bus.
168 Say Y here if you are building a kernel for an EISA-based machine.
175 config STACKTRACE_SUPPORT
179 config LOCKDEP_SUPPORT
183 config TRACE_IRQFLAGS_SUPPORT
187 config RWSEM_XCHGADD_ALGORITHM
191 config ARCH_HAS_ILOG2_U32
194 config ARCH_HAS_ILOG2_U64
197 config ARCH_HAS_BANDGAP
200 config FIX_EARLYCON_MEM
203 config GENERIC_HWEIGHT
207 config GENERIC_CALIBRATE_DELAY
211 config ARCH_MAY_HAVE_PC_FDC
217 config NEED_DMA_MAP_STATE
220 config ARCH_SUPPORTS_UPROBES
223 config ARCH_HAS_DMA_SET_COHERENT_MASK
226 config GENERIC_ISA_DMA
232 config NEED_RET_TO_USER
240 default 0xffff0000 if MMU || CPU_HIGH_VECTOR
241 default DRAM_BASE if REMAP_VECTORS_TO_RAM
244 The base address of exception vectors. This must be two pages
247 config ARM_PATCH_PHYS_VIRT
248 bool "Patch physical to virtual translations at runtime" if EMBEDDED
250 depends on !XIP_KERNEL && MMU
252 Patch phys-to-virt and virt-to-phys translation functions at
253 boot and module load time according to the position of the
254 kernel in system memory.
256 This can only be used with non-XIP MMU kernels where the base
257 of physical memory is at a 16MB boundary.
259 Only disable this option if you know that you do not require
260 this feature (eg, building a kernel for a single machine) and
261 you need to shrink the kernel to the minimal size.
263 config NEED_MACH_IO_H
266 Select this when mach/io.h is required to provide special
267 definitions for this platform. The need for mach/io.h should
268 be avoided when possible.
270 config NEED_MACH_MEMORY_H
273 Select this when mach/memory.h is required to provide special
274 definitions for this platform. The need for mach/memory.h should
275 be avoided when possible.
278 hex "Physical address of main memory" if MMU
279 depends on !ARM_PATCH_PHYS_VIRT
280 default DRAM_BASE if !MMU
281 default 0x00000000 if ARCH_EBSA110 || \
287 default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
288 default 0x20000000 if ARCH_S5PV210
289 default 0xc0000000 if ARCH_SA1100
291 Please provide the physical address corresponding to the
292 location of main memory in your system.
298 config PGTABLE_LEVELS
300 default 3 if ARM_LPAE
303 source "init/Kconfig"
305 source "kernel/Kconfig.freezer"
310 bool "MMU-based Paged Memory Management Support"
313 Select if you want MMU-based virtualised addressing space
314 support by paged memory management. If unsure, say 'Y'.
316 config ARCH_MMAP_RND_BITS_MIN
319 config ARCH_MMAP_RND_BITS_MAX
320 default 14 if PAGE_OFFSET=0x40000000
321 default 15 if PAGE_OFFSET=0x80000000
325 # The "ARM system type" choice list is ordered alphabetically by option
326 # text. Please add new entries in the option alphabetic order.
329 prompt "ARM system type"
330 default ARM_SINGLE_ARMV7M if !MMU
331 default ARCH_MULTIPLATFORM if MMU
333 config ARCH_MULTIPLATFORM
334 bool "Allow multiple platforms to be selected"
336 select ARM_HAS_SG_CHAIN
337 select ARM_PATCH_PHYS_VIRT
341 select GENERIC_CLOCKEVENTS
342 select MIGHT_HAVE_PCI
343 select MULTI_IRQ_HANDLER
344 select PCI_DOMAINS if PCI
348 config ARM_SINGLE_ARMV7M
349 bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
356 select GENERIC_CLOCKEVENTS
362 bool "Cortina Systems Gemini"
365 select GENERIC_CLOCKEVENTS
368 Support for the Cortina Systems Gemini family SoCs
372 select ARCH_USES_GETTIMEOFFSET
375 select NEED_MACH_IO_H
376 select NEED_MACH_MEMORY_H
379 This is an evaluation board for the StrongARM processor available
380 from Digital. It has limited hardware on-board, including an
381 Ethernet interface, two PCMCIA sockets, two serial ports and a
386 select ARCH_HAS_HOLES_MEMORYMODEL
388 select ARM_PATCH_PHYS_VIRT
394 select GENERIC_CLOCKEVENTS
397 This enables support for the Cirrus EP93xx series of CPUs.
399 config ARCH_FOOTBRIDGE
403 select GENERIC_CLOCKEVENTS
405 select NEED_MACH_IO_H if !MMU
406 select NEED_MACH_MEMORY_H
408 Support for systems based on the DC21285 companion chip
409 ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
412 bool "Hilscher NetX based"
416 select GENERIC_CLOCKEVENTS
418 This enables support for systems based on the Hilscher NetX Soc
424 select NEED_MACH_MEMORY_H
425 select NEED_RET_TO_USER
431 Support for Intel's IOP13XX (XScale) family of processors.
439 select NEED_RET_TO_USER
443 Support for Intel's 80219 and IOP32X (XScale) family of
452 select NEED_RET_TO_USER
456 Support for Intel's IOP33X (XScale) family of processors.
461 select ARCH_HAS_DMA_SET_COHERENT_MASK
462 select ARCH_SUPPORTS_BIG_ENDIAN
465 select DMABOUNCE if PCI
466 select GENERIC_CLOCKEVENTS
468 select MIGHT_HAVE_PCI
469 select NEED_MACH_IO_H
470 select USB_EHCI_BIG_ENDIAN_DESC
471 select USB_EHCI_BIG_ENDIAN_MMIO
473 Support for Intel's IXP4XX (XScale) family of processors.
478 select GENERIC_CLOCKEVENTS
480 select MIGHT_HAVE_PCI
481 select MULTI_IRQ_HANDLER
485 select PLAT_ORION_LEGACY
487 select PM_GENERIC_DOMAINS if PM
489 Support for the Marvell Dove SoC 88AP510
492 bool "Micrel/Kendin KS8695"
495 select GENERIC_CLOCKEVENTS
497 select NEED_MACH_MEMORY_H
499 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
500 System-on-Chip devices.
503 bool "Nuvoton W90X900 CPU"
507 select GENERIC_CLOCKEVENTS
510 Support for Nuvoton (Winbond logic dept.) ARM9 processor,
511 At present, the w90x900 has been renamed nuc900, regarding
512 the ARM series product line, you can login the following
513 link address to know more.
515 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
516 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
522 select CLKSRC_LPC32XX
525 select GENERIC_CLOCKEVENTS
527 select MULTI_IRQ_HANDLER
531 Support for the NXP LPC32XX family of processors
534 bool "PXA2xx/PXA3xx-based"
537 select ARM_CPU_SUSPEND if PM
544 select CPU_XSCALE if !CPU_XSC3
545 select GENERIC_CLOCKEVENTS
550 select MULTI_IRQ_HANDLER
554 Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
560 select ARCH_MAY_HAVE_PC_FDC
561 select ARCH_SPARSEMEM_ENABLE
562 select ARCH_USES_GETTIMEOFFSET
566 select HAVE_PATA_PLATFORM
568 select NEED_MACH_IO_H
569 select NEED_MACH_MEMORY_H
572 On the Acorn Risc-PC, Linux can support the internal IDE disk and
573 CD-ROM interface, serial and parallel port, and the floppy drive.
578 select ARCH_SPARSEMEM_ENABLE
582 select CLKSRC_OF if OF
585 select GENERIC_CLOCKEVENTS
590 select MULTI_IRQ_HANDLER
591 select NEED_MACH_MEMORY_H
594 Support for StrongARM 11x0 based boards.
597 bool "Samsung S3C24XX SoCs"
600 select CLKSRC_SAMSUNG_PWM
601 select GENERIC_CLOCKEVENTS
604 select HAVE_S3C2410_I2C if I2C
605 select HAVE_S3C2410_WATCHDOG if WATCHDOG
606 select HAVE_S3C_RTC if RTC_CLASS
607 select MULTI_IRQ_HANDLER
608 select NEED_MACH_IO_H
611 Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
612 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
613 (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
614 Samsung SMDK2410 development board (and derivatives).
618 select ARCH_HAS_HOLES_MEMORYMODEL
621 select GENERIC_ALLOCATOR
622 select GENERIC_CLOCKEVENTS
623 select GENERIC_IRQ_CHIP
629 Support for TI's DaVinci platform.
634 select ARCH_HAS_HOLES_MEMORYMODEL
638 select GENERIC_CLOCKEVENTS
639 select GENERIC_IRQ_CHIP
643 select MULTI_IRQ_HANDLER
644 select NEED_MACH_IO_H if PCCARD
645 select NEED_MACH_MEMORY_H
648 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
652 menu "Multiple platform selection"
653 depends on ARCH_MULTIPLATFORM
655 comment "CPU Core family selection"
658 bool "ARMv4 based platforms (FA526)"
659 depends on !ARCH_MULTI_V6_V7
660 select ARCH_MULTI_V4_V5
663 config ARCH_MULTI_V4T
664 bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
665 depends on !ARCH_MULTI_V6_V7
666 select ARCH_MULTI_V4_V5
667 select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
668 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
669 CPU_ARM925T || CPU_ARM940T)
672 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
673 depends on !ARCH_MULTI_V6_V7
674 select ARCH_MULTI_V4_V5
675 select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
676 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
677 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
679 config ARCH_MULTI_V4_V5
683 bool "ARMv6 based platforms (ARM11)"
684 select ARCH_MULTI_V6_V7
688 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
690 select ARCH_MULTI_V6_V7
694 config ARCH_MULTI_V6_V7
696 select MIGHT_HAVE_CACHE_L2X0
698 config ARCH_MULTI_CPU_AUTO
699 def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
705 bool "Dummy Virtual Machine"
706 depends on ARCH_MULTI_V7
709 select ARM_GIC_V2M if PCI
711 select ARM_GIC_V3_ITS if PCI
713 select HAVE_ARM_ARCH_TIMER
716 # This is sorted alphabetically by mach-* pathname. However, plat-*
717 # Kconfigs may be included either alphabetically (according to the
718 # plat- suffix) or along side the corresponding mach-* source.
720 source "arch/arm/mach-mvebu/Kconfig"
722 source "arch/arm/mach-alpine/Kconfig"
724 source "arch/arm/mach-artpec/Kconfig"
726 source "arch/arm/mach-asm9260/Kconfig"
728 source "arch/arm/mach-at91/Kconfig"
730 source "arch/arm/mach-axxia/Kconfig"
732 source "arch/arm/mach-bcm/Kconfig"
734 source "arch/arm/mach-berlin/Kconfig"
736 source "arch/arm/mach-clps711x/Kconfig"
738 source "arch/arm/mach-cns3xxx/Kconfig"
740 source "arch/arm/mach-davinci/Kconfig"
742 source "arch/arm/mach-digicolor/Kconfig"
744 source "arch/arm/mach-dove/Kconfig"
746 source "arch/arm/mach-ep93xx/Kconfig"
748 source "arch/arm/mach-footbridge/Kconfig"
750 source "arch/arm/mach-gemini/Kconfig"
752 source "arch/arm/mach-highbank/Kconfig"
754 source "arch/arm/mach-hisi/Kconfig"
756 source "arch/arm/mach-integrator/Kconfig"
758 source "arch/arm/mach-iop32x/Kconfig"
760 source "arch/arm/mach-iop33x/Kconfig"
762 source "arch/arm/mach-iop13xx/Kconfig"
764 source "arch/arm/mach-ixp4xx/Kconfig"
766 source "arch/arm/mach-keystone/Kconfig"
768 source "arch/arm/mach-ks8695/Kconfig"
770 source "arch/arm/mach-meson/Kconfig"
772 source "arch/arm/mach-moxart/Kconfig"
774 source "arch/arm/mach-aspeed/Kconfig"
776 source "arch/arm/mach-mv78xx0/Kconfig"
778 source "arch/arm/mach-imx/Kconfig"
780 source "arch/arm/mach-mediatek/Kconfig"
782 source "arch/arm/mach-mxs/Kconfig"
784 source "arch/arm/mach-netx/Kconfig"
786 source "arch/arm/mach-nomadik/Kconfig"
788 source "arch/arm/mach-nspire/Kconfig"
790 source "arch/arm/plat-omap/Kconfig"
792 source "arch/arm/mach-omap1/Kconfig"
794 source "arch/arm/mach-omap2/Kconfig"
796 source "arch/arm/mach-orion5x/Kconfig"
798 source "arch/arm/mach-picoxcell/Kconfig"
800 source "arch/arm/mach-pxa/Kconfig"
801 source "arch/arm/plat-pxa/Kconfig"
803 source "arch/arm/mach-mmp/Kconfig"
805 source "arch/arm/mach-oxnas/Kconfig"
807 source "arch/arm/mach-qcom/Kconfig"
809 source "arch/arm/mach-realview/Kconfig"
811 source "arch/arm/mach-rockchip/Kconfig"
813 source "arch/arm/mach-sa1100/Kconfig"
815 source "arch/arm/mach-socfpga/Kconfig"
817 source "arch/arm/mach-spear/Kconfig"
819 source "arch/arm/mach-sti/Kconfig"
821 source "arch/arm/mach-s3c24xx/Kconfig"
823 source "arch/arm/mach-s3c64xx/Kconfig"
825 source "arch/arm/mach-s5pv210/Kconfig"
827 source "arch/arm/mach-exynos/Kconfig"
828 source "arch/arm/plat-samsung/Kconfig"
830 source "arch/arm/mach-shmobile/Kconfig"
832 source "arch/arm/mach-sunxi/Kconfig"
834 source "arch/arm/mach-prima2/Kconfig"
836 source "arch/arm/mach-tango/Kconfig"
838 source "arch/arm/mach-tegra/Kconfig"
840 source "arch/arm/mach-u300/Kconfig"
842 source "arch/arm/mach-uniphier/Kconfig"
844 source "arch/arm/mach-ux500/Kconfig"
846 source "arch/arm/mach-versatile/Kconfig"
848 source "arch/arm/mach-vexpress/Kconfig"
849 source "arch/arm/plat-versatile/Kconfig"
851 source "arch/arm/mach-vt8500/Kconfig"
853 source "arch/arm/mach-w90x900/Kconfig"
855 source "arch/arm/mach-zx/Kconfig"
857 source "arch/arm/mach-zynq/Kconfig"
859 # ARMv7-M architecture
861 bool "Energy Micro efm32"
862 depends on ARM_SINGLE_ARMV7M
865 Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
869 bool "NXP LPC18xx/LPC43xx"
870 depends on ARM_SINGLE_ARMV7M
871 select ARCH_HAS_RESET_CONTROLLER
873 select CLKSRC_LPC32XX
876 Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
877 high performance microcontrollers.
880 bool "STMicrolectronics STM32"
881 depends on ARM_SINGLE_ARMV7M
882 select ARCH_HAS_RESET_CONTROLLER
883 select ARMV7M_SYSTICK
886 select RESET_CONTROLLER
889 Support for STMicroelectronics STM32 processors.
891 config MACH_STM32F429
892 bool "STMicrolectronics STM32F429"
893 depends on ARCH_STM32
896 config MACH_STM32F746
897 bool "STMicrolectronics STM32F746"
898 depends on ARCH_STM32
902 bool "ARM MPS2 platform"
903 depends on ARM_SINGLE_ARMV7M
907 Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
908 with a range of available cores like Cortex-M3/M4/M7.
910 Please, note that depends which Application Note is used memory map
911 for the platform may vary, so adjustment of RAM base might be needed.
913 # Definitions to make life easier
919 select GENERIC_CLOCKEVENTS
925 select GENERIC_IRQ_CHIP
928 config PLAT_ORION_LEGACY
935 config PLAT_VERSATILE
938 source "arch/arm/firmware/Kconfig"
940 source arch/arm/mm/Kconfig
943 bool "Enable iWMMXt support"
944 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
945 default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
947 Enable support for iWMMXt context switching at run time if
948 running on a CPU that supports it.
950 config MULTI_IRQ_HANDLER
953 Allow each machine to specify it's own IRQ handler at run time.
956 source "arch/arm/Kconfig-nommu"
959 config PJ4B_ERRATA_4742
960 bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
961 depends on CPU_PJ4B && MACH_ARMADA_370
964 When coming out of either a Wait for Interrupt (WFI) or a Wait for
965 Event (WFE) IDLE states, a specific timing sensitivity exists between
966 the retiring WFI/WFE instructions and the newly issued subsequent
967 instructions. This sensitivity can result in a CPU hang scenario.
969 The software must insert either a Data Synchronization Barrier (DSB)
970 or Data Memory Barrier (DMB) command immediately after the WFI/WFE
973 config ARM_ERRATA_326103
974 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
977 Executing a SWP instruction to read-only memory does not set bit 11
978 of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
979 treat the access as a read, preventing a COW from occurring and
980 causing the faulting task to livelock.
982 config ARM_ERRATA_411920
983 bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
984 depends on CPU_V6 || CPU_V6K
986 Invalidation of the Instruction Cache operation can
987 fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
988 It does not affect the MPCore. This option enables the ARM Ltd.
989 recommended workaround.
991 config ARM_ERRATA_430973
992 bool "ARM errata: Stale prediction on replaced interworking branch"
995 This option enables the workaround for the 430973 Cortex-A8
996 r1p* erratum. If a code sequence containing an ARM/Thumb
997 interworking branch is replaced with another code sequence at the
998 same virtual address, whether due to self-modifying code or virtual
999 to physical address re-mapping, Cortex-A8 does not recover from the
1000 stale interworking branch prediction. This results in Cortex-A8
1001 executing the new code sequence in the incorrect ARM or Thumb state.
1002 The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
1003 and also flushes the branch target cache at every context switch.
1004 Note that setting specific bits in the ACTLR register may not be
1005 available in non-secure mode.
1007 config ARM_ERRATA_458693
1008 bool "ARM errata: Processor deadlock when a false hazard is created"
1010 depends on !ARCH_MULTIPLATFORM
1012 This option enables the workaround for the 458693 Cortex-A8 (r2p0)
1013 erratum. For very specific sequences of memory operations, it is
1014 possible for a hazard condition intended for a cache line to instead
1015 be incorrectly associated with a different cache line. This false
1016 hazard might then cause a processor deadlock. The workaround enables
1017 the L1 caching of the NEON accesses and disables the PLD instruction
1018 in the ACTLR register. Note that setting specific bits in the ACTLR
1019 register may not be available in non-secure mode.
1021 config ARM_ERRATA_460075
1022 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1024 depends on !ARCH_MULTIPLATFORM
1026 This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1027 erratum. Any asynchronous access to the L2 cache may encounter a
1028 situation in which recent store transactions to the L2 cache are lost
1029 and overwritten with stale memory contents from external memory. The
1030 workaround disables the write-allocate mode for the L2 cache via the
1031 ACTLR register. Note that setting specific bits in the ACTLR register
1032 may not be available in non-secure mode.
1034 config ARM_ERRATA_742230
1035 bool "ARM errata: DMB operation may be faulty"
1036 depends on CPU_V7 && SMP
1037 depends on !ARCH_MULTIPLATFORM
1039 This option enables the workaround for the 742230 Cortex-A9
1040 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1041 between two write operations may not ensure the correct visibility
1042 ordering of the two writes. This workaround sets a specific bit in
1043 the diagnostic register of the Cortex-A9 which causes the DMB
1044 instruction to behave as a DSB, ensuring the correct behaviour of
1047 config ARM_ERRATA_742231
1048 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1049 depends on CPU_V7 && SMP
1050 depends on !ARCH_MULTIPLATFORM
1052 This option enables the workaround for the 742231 Cortex-A9
1053 (r2p0..r2p2) erratum. Under certain conditions, specific to the
1054 Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1055 accessing some data located in the same cache line, may get corrupted
1056 data due to bad handling of the address hazard when the line gets
1057 replaced from one of the CPUs at the same time as another CPU is
1058 accessing it. This workaround sets specific bits in the diagnostic
1059 register of the Cortex-A9 which reduces the linefill issuing
1060 capabilities of the processor.
1062 config ARM_ERRATA_643719
1063 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1064 depends on CPU_V7 && SMP
1067 This option enables the workaround for the 643719 Cortex-A9 (prior to
1068 r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1069 register returns zero when it should return one. The workaround
1070 corrects this value, ensuring cache maintenance operations which use
1071 it behave as intended and avoiding data corruption.
1073 config ARM_ERRATA_720789
1074 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1077 This option enables the workaround for the 720789 Cortex-A9 (prior to
1078 r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1079 broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1080 As a consequence of this erratum, some TLB entries which should be
1081 invalidated are not, resulting in an incoherency in the system page
1082 tables. The workaround changes the TLB flushing routines to invalidate
1083 entries regardless of the ASID.
1085 config ARM_ERRATA_743622
1086 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1088 depends on !ARCH_MULTIPLATFORM
1090 This option enables the workaround for the 743622 Cortex-A9
1091 (r2p*) erratum. Under very rare conditions, a faulty
1092 optimisation in the Cortex-A9 Store Buffer may lead to data
1093 corruption. This workaround sets a specific bit in the diagnostic
1094 register of the Cortex-A9 which disables the Store Buffer
1095 optimisation, preventing the defect from occurring. This has no
1096 visible impact on the overall performance or power consumption of the
1099 config ARM_ERRATA_751472
1100 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1102 depends on !ARCH_MULTIPLATFORM
1104 This option enables the workaround for the 751472 Cortex-A9 (prior
1105 to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1106 completion of a following broadcasted operation if the second
1107 operation is received by a CPU before the ICIALLUIS has completed,
1108 potentially leading to corrupted entries in the cache or TLB.
1110 config ARM_ERRATA_754322
1111 bool "ARM errata: possible faulty MMU translations following an ASID switch"
1114 This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1115 r3p*) erratum. A speculative memory access may cause a page table walk
1116 which starts prior to an ASID switch but completes afterwards. This
1117 can populate the micro-TLB with a stale entry which may be hit with
1118 the new ASID. This workaround places two dsb instructions in the mm
1119 switching code so that no page table walks can cross the ASID switch.
1121 config ARM_ERRATA_754327
1122 bool "ARM errata: no automatic Store Buffer drain"
1123 depends on CPU_V7 && SMP
1125 This option enables the workaround for the 754327 Cortex-A9 (prior to
1126 r2p0) erratum. The Store Buffer does not have any automatic draining
1127 mechanism and therefore a livelock may occur if an external agent
1128 continuously polls a memory location waiting to observe an update.
1129 This workaround defines cpu_relax() as smp_mb(), preventing correctly
1130 written polling loops from denying visibility of updates to memory.
1132 config ARM_ERRATA_364296
1133 bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1136 This options enables the workaround for the 364296 ARM1136
1137 r0p2 erratum (possible cache data corruption with
1138 hit-under-miss enabled). It sets the undocumented bit 31 in
1139 the auxiliary control register and the FI bit in the control
1140 register, thus disabling hit-under-miss without putting the
1141 processor into full low interrupt latency mode. ARM11MPCore
1144 config ARM_ERRATA_764369
1145 bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1146 depends on CPU_V7 && SMP
1148 This option enables the workaround for erratum 764369
1149 affecting Cortex-A9 MPCore with two or more processors (all
1150 current revisions). Under certain timing circumstances, a data
1151 cache line maintenance operation by MVA targeting an Inner
1152 Shareable memory region may fail to proceed up to either the
1153 Point of Coherency or to the Point of Unification of the
1154 system. This workaround adds a DSB instruction before the
1155 relevant cache maintenance functions and sets a specific bit
1156 in the diagnostic control register of the SCU.
1158 config ARM_ERRATA_775420
1159 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1162 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1163 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1164 operation aborts with MMU exception, it might cause the processor
1165 to deadlock. This workaround puts DSB before executing ISB if
1166 an abort may occur on cache maintenance.
1168 config ARM_ERRATA_798181
1169 bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1170 depends on CPU_V7 && SMP
1172 On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1173 adequately shooting down all use of the old entries. This
1174 option enables the Linux kernel workaround for this erratum
1175 which sends an IPI to the CPUs that are running the same ASID
1176 as the one being invalidated.
1178 config ARM_ERRATA_773022
1179 bool "ARM errata: incorrect instructions may be executed from loop buffer"
1182 This option enables the workaround for the 773022 Cortex-A15
1183 (up to r0p4) erratum. In certain rare sequences of code, the
1184 loop buffer may deliver incorrect instructions. This
1185 workaround disables the loop buffer to avoid the erratum.
1187 config ARM_ERRATA_818325_852422
1188 bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
1191 This option enables the workaround for:
1192 - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
1193 instruction might deadlock. Fixed in r0p1.
1194 - Cortex-A12 852422: Execution of a sequence of instructions might
1195 lead to either a data corruption or a CPU deadlock. Not fixed in
1196 any Cortex-A12 cores yet.
1197 This workaround for all both errata involves setting bit[12] of the
1198 Feature Register. This bit disables an optimisation applied to a
1199 sequence of 2 instructions that use opposing condition codes.
1201 config ARM_ERRATA_821420
1202 bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
1205 This option enables the workaround for the 821420 Cortex-A12
1206 (all revs) erratum. In very rare timing conditions, a sequence
1207 of VMOV to Core registers instructions, for which the second
1208 one is in the shadow of a branch or abort, can lead to a
1209 deadlock when the VMOV instructions are issued out-of-order.
1211 config ARM_ERRATA_825619
1212 bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
1215 This option enables the workaround for the 825619 Cortex-A12
1216 (all revs) erratum. Within rare timing constraints, executing a
1217 DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
1218 and Device/Strongly-Ordered loads and stores might cause deadlock
1220 config ARM_ERRATA_852421
1221 bool "ARM errata: A17: DMB ST might fail to create order between stores"
1224 This option enables the workaround for the 852421 Cortex-A17
1225 (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
1226 execution of a DMB ST instruction might fail to properly order
1227 stores from GroupA and stores from GroupB.
1229 config ARM_ERRATA_852423
1230 bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
1233 This option enables the workaround for:
1234 - Cortex-A17 852423: Execution of a sequence of instructions might
1235 lead to either a data corruption or a CPU deadlock. Not fixed in
1236 any Cortex-A17 cores yet.
1237 This is identical to Cortex-A12 erratum 852422. It is a separate
1238 config option from the A12 erratum due to the way errata are checked
1243 source "arch/arm/common/Kconfig"
1250 Find out whether you have ISA slots on your motherboard. ISA is the
1251 name of a bus system, i.e. the way the CPU talks to the other stuff
1252 inside your box. Other bus systems are PCI, EISA, MicroChannel
1253 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1254 newer boards don't support it. If you have ISA, say Y, otherwise N.
1256 # Select ISA DMA controller support
1261 # Select ISA DMA interface
1266 bool "PCI support" if MIGHT_HAVE_PCI
1268 Find out whether you have a PCI motherboard. PCI is the name of a
1269 bus system, i.e. the way the CPU talks to the other stuff inside
1270 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1271 VESA. If you have PCI, say Y, otherwise N.
1277 config PCI_DOMAINS_GENERIC
1278 def_bool PCI_DOMAINS
1280 config PCI_NANOENGINE
1281 bool "BSE nanoEngine PCI support"
1282 depends on SA1100_NANOENGINE
1284 Enable PCI on the BSE nanoEngine board.
1289 config PCI_HOST_ITE8152
1291 depends on PCI && MACH_ARMCORE
1295 source "drivers/pci/Kconfig"
1297 source "drivers/pcmcia/Kconfig"
1301 menu "Kernel Features"
1306 This option should be selected by machines which have an SMP-
1309 The only effect of this option is to make the SMP-related
1310 options available to the user for configuration.
1313 bool "Symmetric Multi-Processing"
1314 depends on CPU_V6K || CPU_V7
1315 depends on GENERIC_CLOCKEVENTS
1317 depends on MMU || ARM_MPU
1320 This enables support for systems with more than one CPU. If you have
1321 a system with only one CPU, say N. If you have a system with more
1322 than one CPU, say Y.
1324 If you say N here, the kernel will run on uni- and multiprocessor
1325 machines, but will use only one CPU of a multiprocessor machine. If
1326 you say Y here, the kernel will run on many, but not all,
1327 uniprocessor machines. On a uniprocessor machine, the kernel
1328 will run faster if you say N here.
1330 See also <file:Documentation/x86/i386/IO-APIC.txt>,
1331 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1332 <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1334 If you don't know what to do here, say N.
1337 bool "Allow booting SMP kernel on uniprocessor systems"
1338 depends on SMP && !XIP_KERNEL && MMU
1341 SMP kernels contain instructions which fail on non-SMP processors.
1342 Enabling this option allows the kernel to modify itself to make
1343 these instructions safe. Disabling it allows about 1K of space
1346 If you don't know what to do here, say Y.
1348 config ARM_CPU_TOPOLOGY
1349 bool "Support cpu topology definition"
1350 depends on SMP && CPU_V7
1353 Support ARM cpu topology definition. The MPIDR register defines
1354 affinity between processors which is then used to describe the cpu
1355 topology of an ARM System.
1358 bool "Multi-core scheduler support"
1359 depends on ARM_CPU_TOPOLOGY
1361 Multi-core scheduler support improves the CPU scheduler's decision
1362 making when dealing with multi-core CPU chips at a cost of slightly
1363 increased overhead in some places. If unsure say N here.
1366 bool "SMT scheduler support"
1367 depends on ARM_CPU_TOPOLOGY
1369 Improves the CPU scheduler's decision making when dealing with
1370 MultiThreading at a cost of slightly increased overhead in some
1371 places. If unsure say N here.
1376 This option enables support for the ARM system coherency unit
1378 config HAVE_ARM_ARCH_TIMER
1379 bool "Architected timer support"
1381 select ARM_ARCH_TIMER
1382 select GENERIC_CLOCKEVENTS
1384 This option enables support for the ARM architected timer
1388 select CLKSRC_OF if OF
1390 This options enables support for the ARM timer and watchdog unit
1393 bool "Multi-Cluster Power Management"
1394 depends on CPU_V7 && SMP
1396 This option provides the common power management infrastructure
1397 for (multi-)cluster based systems, such as big.LITTLE based
1400 config MCPM_QUAD_CLUSTER
1404 To avoid wasting resources unnecessarily, MCPM only supports up
1405 to 2 clusters by default.
1406 Platforms with 3 or 4 clusters that use MCPM must select this
1407 option to allow the additional clusters to be managed.
1410 bool "big.LITTLE support (Experimental)"
1411 depends on CPU_V7 && SMP
1414 This option enables support selections for the big.LITTLE
1415 system architecture.
1418 bool "big.LITTLE switcher support"
1419 depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
1422 The big.LITTLE "switcher" provides the core functionality to
1423 transparently handle transition between a cluster of A15's
1424 and a cluster of A7's in a big.LITTLE system.
1426 config BL_SWITCHER_DUMMY_IF
1427 tristate "Simple big.LITTLE switcher user interface"
1428 depends on BL_SWITCHER && DEBUG_KERNEL
1430 This is a simple and dummy char dev interface to control
1431 the big.LITTLE switcher core code. It is meant for
1432 debugging purposes only.
1435 prompt "Memory split"
1439 Select the desired split between kernel and user memory.
1441 If you are not absolutely sure what you are doing, leave this
1445 bool "3G/1G user/kernel split"
1446 config VMSPLIT_3G_OPT
1447 bool "3G/1G user/kernel split (for full 1G low memory)"
1449 bool "2G/2G user/kernel split"
1451 bool "1G/3G user/kernel split"
1456 default PHYS_OFFSET if !MMU
1457 default 0x40000000 if VMSPLIT_1G
1458 default 0x80000000 if VMSPLIT_2G
1459 default 0xB0000000 if VMSPLIT_3G_OPT
1463 int "Maximum number of CPUs (2-32)"
1469 bool "Support for hot-pluggable CPUs"
1472 Say Y here to experiment with turning CPUs off and on. CPUs
1473 can be controlled through /sys/devices/system/cpu.
1476 bool "Support for the ARM Power State Coordination Interface (PSCI)"
1477 depends on HAVE_ARM_SMCCC
1480 Say Y here if you want Linux to communicate with system firmware
1481 implementing the PSCI specification for CPU-centric power
1482 management operations described in ARM document number ARM DEN
1483 0022A ("Power State Coordination Interface System Software on
1486 # The GPIO number here must be sorted by descending number. In case of
1487 # a multiplatform kernel, we just want the highest value required by the
1488 # selected platforms.
1491 default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
1493 default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1494 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1495 default 416 if ARCH_SUNXI
1496 default 392 if ARCH_U8500
1497 default 352 if ARCH_VT8500
1498 default 288 if ARCH_ROCKCHIP
1499 default 264 if MACH_H4700
1502 Maximum number of GPIOs in the system.
1504 If unsure, leave the default value.
1506 source kernel/Kconfig.preempt
1510 default 200 if ARCH_EBSA110
1511 default 128 if SOC_AT91RM9200
1515 depends on HZ_FIXED = 0
1516 prompt "Timer frequency"
1540 default HZ_FIXED if HZ_FIXED != 0
1541 default 100 if HZ_100
1542 default 200 if HZ_200
1543 default 250 if HZ_250
1544 default 300 if HZ_300
1545 default 500 if HZ_500
1549 def_bool HIGH_RES_TIMERS
1551 config THUMB2_KERNEL
1552 bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1553 depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1554 default y if CPU_THUMBONLY
1556 select ARM_ASM_UNIFIED
1559 By enabling this option, the kernel will be compiled in
1560 Thumb-2 mode. A compiler/assembler that understand the unified
1561 ARM-Thumb syntax is needed.
1565 config THUMB2_AVOID_R_ARM_THM_JUMP11
1566 bool "Work around buggy Thumb-2 short branch relocations in gas"
1567 depends on THUMB2_KERNEL && MODULES
1570 Various binutils versions can resolve Thumb-2 branches to
1571 locally-defined, preemptible global symbols as short-range "b.n"
1572 branch instructions.
1574 This is a problem, because there's no guarantee the final
1575 destination of the symbol, or any candidate locations for a
1576 trampoline, are within range of the branch. For this reason, the
1577 kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1578 relocation in modules at all, and it makes little sense to add
1581 The symptom is that the kernel fails with an "unsupported
1582 relocation" error when loading some modules.
1584 Until fixed tools are available, passing
1585 -fno-optimize-sibling-calls to gcc should prevent gcc generating
1586 code which hits this problem, at the cost of a bit of extra runtime
1587 stack usage in some cases.
1589 The problem is described in more detail at:
1590 https://bugs.launchpad.net/binutils-linaro/+bug/725126
1592 Only Thumb-2 kernels are affected.
1594 Unless you are sure your tools don't have this problem, say Y.
1596 config ARM_ASM_UNIFIED
1599 config ARM_PATCH_IDIV
1600 bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
1601 depends on CPU_32v7 && !XIP_KERNEL
1604 The ARM compiler inserts calls to __aeabi_idiv() and
1605 __aeabi_uidiv() when it needs to perform division on signed
1606 and unsigned integers. Some v7 CPUs have support for the sdiv
1607 and udiv instructions that can be used to implement those
1610 Enabling this option allows the kernel to modify itself to
1611 replace the first two instructions of these library functions
1612 with the sdiv or udiv plus "bx lr" instructions when the CPU
1613 it is running on supports them. Typically this will be faster
1614 and less power intensive than running the original library
1615 code to do integer division.
1618 bool "Use the ARM EABI to compile the kernel"
1620 This option allows for the kernel to be compiled using the latest
1621 ARM ABI (aka EABI). This is only useful if you are using a user
1622 space environment that is also compiled with EABI.
1624 Since there are major incompatibilities between the legacy ABI and
1625 EABI, especially with regard to structure member alignment, this
1626 option also changes the kernel syscall calling convention to
1627 disambiguate both ABIs and allow for backward compatibility support
1628 (selected with CONFIG_OABI_COMPAT).
1630 To use this you need GCC version 4.0.0 or later.
1633 bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1634 depends on AEABI && !THUMB2_KERNEL
1636 This option preserves the old syscall interface along with the
1637 new (ARM EABI) one. It also provides a compatibility layer to
1638 intercept syscalls that have structure arguments which layout
1639 in memory differs between the legacy ABI and the new ARM EABI
1640 (only for non "thumb" binaries). This option adds a tiny
1641 overhead to all syscalls and produces a slightly larger kernel.
1643 The seccomp filter system will not be available when this is
1644 selected, since there is no way yet to sensibly distinguish
1645 between calling conventions during filtering.
1647 If you know you'll be using only pure EABI user space then you
1648 can say N here. If this option is not selected and you attempt
1649 to execute a legacy ABI binary then the result will be
1650 UNPREDICTABLE (in fact it can be predicted that it won't work
1651 at all). If in doubt say N.
1653 config ARCH_HAS_HOLES_MEMORYMODEL
1656 config ARCH_SPARSEMEM_ENABLE
1659 config ARCH_SPARSEMEM_DEFAULT
1660 def_bool ARCH_SPARSEMEM_ENABLE
1662 config ARCH_SELECT_MEMORY_MODEL
1663 def_bool ARCH_SPARSEMEM_ENABLE
1665 config HAVE_ARCH_PFN_VALID
1666 def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1668 config HAVE_GENERIC_RCU_GUP
1673 bool "High Memory Support"
1676 The address space of ARM processors is only 4 Gigabytes large
1677 and it has to accommodate user address space, kernel address
1678 space as well as some memory mapped IO. That means that, if you
1679 have a large amount of physical memory and/or IO, not all of the
1680 memory can be "permanently mapped" by the kernel. The physical
1681 memory that is not permanently mapped is called "high memory".
1683 Depending on the selected kernel/user memory split, minimum
1684 vmalloc space and actual amount of RAM, you may not need this
1685 option which should result in a slightly faster kernel.
1690 bool "Allocate 2nd-level pagetables from highmem" if EXPERT
1694 The VM uses one page of physical memory for each page table.
1695 For systems with a lot of processes, this can use a lot of
1696 precious low memory, eventually leading to low memory being
1697 consumed by page tables. Setting this option will allow
1698 user-space 2nd level page tables to reside in high memory.
1700 config CPU_SW_DOMAIN_PAN
1701 bool "Enable use of CPU domains to implement privileged no-access"
1702 depends on MMU && !ARM_LPAE
1705 Increase kernel security by ensuring that normal kernel accesses
1706 are unable to access userspace addresses. This can help prevent
1707 use-after-free bugs becoming an exploitable privilege escalation
1708 by ensuring that magic values (such as LIST_POISON) will always
1709 fault when dereferenced.
1711 CPUs with low-vector mappings use a best-efforts implementation.
1712 Their lower 1MB needs to remain accessible for the vectors, but
1713 the remainder of userspace will become appropriately inaccessible.
1715 config HW_PERF_EVENTS
1719 config SYS_SUPPORTS_HUGETLBFS
1723 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1727 config ARCH_WANT_GENERAL_HUGETLB
1730 config ARM_MODULE_PLTS
1731 bool "Use PLTs to allow module memory to spill over into vmalloc area"
1734 Allocate PLTs when loading modules so that jumps and calls whose
1735 targets are too far away for their relative offsets to be encoded
1736 in the instructions themselves can be bounced via veneers in the
1737 module's PLT. This allows modules to be allocated in the generic
1738 vmalloc area after the dedicated module memory area has been
1739 exhausted. The modules will use slightly more memory, but after
1740 rounding up to page size, the actual memory footprint is usually
1743 Say y if you are getting out of memory errors while loading modules
1747 config FORCE_MAX_ZONEORDER
1748 int "Maximum zone order"
1749 default "12" if SOC_AM33XX
1750 default "9" if SA1111 || ARCH_EFM32
1753 The kernel memory allocator divides physically contiguous memory
1754 blocks into "zones", where each zone is a power of two number of
1755 pages. This option selects the largest power of two that the kernel
1756 keeps in the memory allocator. If you need to allocate very large
1757 blocks of physically contiguous memory, then you may need to
1758 increase this value.
1760 This config option is actually maximum order plus one. For example,
1761 a value of 11 means that the largest free memory block is 2^10 pages.
1763 config ALIGNMENT_TRAP
1765 depends on CPU_CP15_MMU
1766 default y if !ARCH_EBSA110
1767 select HAVE_PROC_CPU if PROC_FS
1769 ARM processors cannot fetch/store information which is not
1770 naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1771 address divisible by 4. On 32-bit ARM processors, these non-aligned
1772 fetch/store instructions will be emulated in software if you say
1773 here, which has a severe performance impact. This is necessary for
1774 correct operation of some network protocols. With an IP-only
1775 configuration it is safe to say N, otherwise say Y.
1777 config UACCESS_WITH_MEMCPY
1778 bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1780 default y if CPU_FEROCEON
1782 Implement faster copy_to_user and clear_user methods for CPU
1783 cores where a 8-word STM instruction give significantly higher
1784 memory write throughput than a sequence of individual 32bit stores.
1786 A possible side effect is a slight increase in scheduling latency
1787 between threads sharing the same address space if they invoke
1788 such copy operations with large buffers.
1790 However, if the CPU data cache is using a write-allocate mode,
1791 this option is unlikely to provide any performance gain.
1795 prompt "Enable seccomp to safely compute untrusted bytecode"
1797 This kernel feature is useful for number crunching applications
1798 that may need to compute untrusted bytecode during their
1799 execution. By using pipes or other transports made available to
1800 the process as file descriptors supporting the read/write
1801 syscalls, it's possible to isolate those applications in
1802 their own address space using seccomp. Once seccomp is
1803 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1804 and the task is only allowed to execute a few safe syscalls
1805 defined by each seccomp mode.
1814 bool "Enable paravirtualization code"
1816 This changes the kernel so it can modify itself when it is run
1817 under a hypervisor, potentially improving performance significantly
1818 over full virtualization.
1820 config PARAVIRT_TIME_ACCOUNTING
1821 bool "Paravirtual steal time accounting"
1825 Select this option to enable fine granularity task steal time
1826 accounting. Time spent executing other tasks in parallel with
1827 the current vCPU is discounted from the vCPU power. To account for
1828 that, there can be a small performance impact.
1830 If in doubt, say N here.
1837 bool "Xen guest support on ARM"
1838 depends on ARM && AEABI && OF
1839 depends on CPU_V7 && !CPU_V6
1840 depends on !GENERIC_ATOMIC64
1842 select ARCH_DMA_ADDR_T_64BIT
1847 Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1854 bool "Flattened Device Tree support"
1858 Include support for flattened device tree machine descriptions.
1861 bool "Support for the traditional ATAGS boot data passing" if USE_OF
1864 This is the traditional way of passing data to the kernel at boot
1865 time. If you are solely relying on the flattened device tree (or
1866 the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1867 to remove ATAGS support from your kernel binary. If unsure,
1870 config DEPRECATED_PARAM_STRUCT
1871 bool "Provide old way to pass kernel parameters"
1874 This was deprecated in 2001 and announced to live on for 5 years.
1875 Some old boot loaders still use this way.
1877 # Compressed boot loader in ROM. Yes, we really want to ask about
1878 # TEXT and BSS so we preserve their values in the config files.
1879 config ZBOOT_ROM_TEXT
1880 hex "Compressed ROM boot loader base address"
1883 The physical address at which the ROM-able zImage is to be
1884 placed in the target. Platforms which normally make use of
1885 ROM-able zImage formats normally set this to a suitable
1886 value in their defconfig file.
1888 If ZBOOT_ROM is not enabled, this has no effect.
1890 config ZBOOT_ROM_BSS
1891 hex "Compressed ROM boot loader BSS address"
1894 The base address of an area of read/write memory in the target
1895 for the ROM-able zImage which must be available while the
1896 decompressor is running. It must be large enough to hold the
1897 entire decompressed kernel plus an additional 128 KiB.
1898 Platforms which normally make use of ROM-able zImage formats
1899 normally set this to a suitable value in their defconfig file.
1901 If ZBOOT_ROM is not enabled, this has no effect.
1904 bool "Compressed boot loader in ROM/flash"
1905 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1906 depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1908 Say Y here if you intend to execute your compressed kernel image
1909 (zImage) directly from ROM or flash. If unsure, say N.
1911 config ARM_APPENDED_DTB
1912 bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1915 With this option, the boot code will look for a device tree binary
1916 (DTB) appended to zImage
1917 (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1919 This is meant as a backward compatibility convenience for those
1920 systems with a bootloader that can't be upgraded to accommodate
1921 the documented boot protocol using a device tree.
1923 Beware that there is very little in terms of protection against
1924 this option being confused by leftover garbage in memory that might
1925 look like a DTB header after a reboot if no actual DTB is appended
1926 to zImage. Do not leave this option active in a production kernel
1927 if you don't intend to always append a DTB. Proper passing of the
1928 location into r2 of a bootloader provided DTB is always preferable
1931 config ARM_ATAG_DTB_COMPAT
1932 bool "Supplement the appended DTB with traditional ATAG information"
1933 depends on ARM_APPENDED_DTB
1935 Some old bootloaders can't be updated to a DTB capable one, yet
1936 they provide ATAGs with memory configuration, the ramdisk address,
1937 the kernel cmdline string, etc. Such information is dynamically
1938 provided by the bootloader and can't always be stored in a static
1939 DTB. To allow a device tree enabled kernel to be used with such
1940 bootloaders, this option allows zImage to extract the information
1941 from the ATAG list and store it at run time into the appended DTB.
1944 prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1945 default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1947 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1948 bool "Use bootloader kernel arguments if available"
1950 Uses the command-line options passed by the boot loader instead of
1951 the device tree bootargs property. If the boot loader doesn't provide
1952 any, the device tree bootargs property will be used.
1954 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1955 bool "Extend with bootloader kernel arguments"
1957 The command-line arguments provided by the boot loader will be
1958 appended to the the device tree bootargs property.
1963 string "Default kernel command string"
1966 On some architectures (EBSA110 and CATS), there is currently no way
1967 for the boot loader to pass arguments to the kernel. For these
1968 architectures, you should supply some command-line options at build
1969 time by entering them here. As a minimum, you should specify the
1970 memory size and the root device (e.g., mem=64M root=/dev/nfs).
1973 prompt "Kernel command line type" if CMDLINE != ""
1974 default CMDLINE_FROM_BOOTLOADER
1977 config CMDLINE_FROM_BOOTLOADER
1978 bool "Use bootloader kernel arguments if available"
1980 Uses the command-line options passed by the boot loader. If
1981 the boot loader doesn't provide any, the default kernel command
1982 string provided in CMDLINE will be used.
1984 config CMDLINE_EXTEND
1985 bool "Extend bootloader kernel arguments"
1987 The command-line arguments provided by the boot loader will be
1988 appended to the default kernel command string.
1990 config CMDLINE_FORCE
1991 bool "Always use the default kernel command string"
1993 Always use the default kernel command string, even if the boot
1994 loader passes other arguments to the kernel.
1995 This is useful if you cannot or don't want to change the
1996 command-line options your boot loader passes to the kernel.
2000 bool "Kernel Execute-In-Place from ROM"
2001 depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
2003 Execute-In-Place allows the kernel to run from non-volatile storage
2004 directly addressable by the CPU, such as NOR flash. This saves RAM
2005 space since the text section of the kernel is not loaded from flash
2006 to RAM. Read-write sections, such as the data section and stack,
2007 are still copied to RAM. The XIP kernel is not compressed since
2008 it has to run directly from flash, so it will take more space to
2009 store it. The flash address used to link the kernel object files,
2010 and for storing it, is configuration dependent. Therefore, if you
2011 say Y here, you must know the proper physical address where to
2012 store the kernel image depending on your own flash memory usage.
2014 Also note that the make target becomes "make xipImage" rather than
2015 "make zImage" or "make Image". The final kernel binary to put in
2016 ROM memory will be arch/arm/boot/xipImage.
2020 config XIP_PHYS_ADDR
2021 hex "XIP Kernel Physical Location"
2022 depends on XIP_KERNEL
2023 default "0x00080000"
2025 This is the physical address in your flash memory the kernel will
2026 be linked for and stored to. This address is dependent on your
2030 bool "Kexec system call (EXPERIMENTAL)"
2031 depends on (!SMP || PM_SLEEP_SMP)
2035 kexec is a system call that implements the ability to shutdown your
2036 current kernel, and to start another kernel. It is like a reboot
2037 but it is independent of the system firmware. And like a reboot
2038 you can start any kernel with it, not just Linux.
2040 It is an ongoing process to be certain the hardware in a machine
2041 is properly shutdown, so do not be surprised if this code does not
2042 initially work for you.
2045 bool "Export atags in procfs"
2046 depends on ATAGS && KEXEC
2049 Should the atags used to boot the kernel be exported in an "atags"
2050 file in procfs. Useful with kexec.
2053 bool "Build kdump crash kernel (EXPERIMENTAL)"
2055 Generate crash dump after being started by kexec. This should
2056 be normally only set in special crash dump kernels which are
2057 loaded in the main kernel with kexec-tools into a specially
2058 reserved region and then later executed after a crash by
2059 kdump/kexec. The crash dump kernel must be compiled to a
2060 memory address not used by the main kernel
2062 For more details see Documentation/kdump/kdump.txt
2064 config AUTO_ZRELADDR
2065 bool "Auto calculation of the decompressed kernel image address"
2067 ZRELADDR is the physical address where the decompressed kernel
2068 image will be placed. If AUTO_ZRELADDR is selected, the address
2069 will be determined at run-time by masking the current IP with
2070 0xf8000000. This assumes the zImage being placed in the first 128MB
2071 from start of memory.
2077 bool "UEFI runtime support"
2078 depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
2080 select EFI_PARAMS_FROM_FDT
2083 select EFI_RUNTIME_WRAPPERS
2085 This option provides support for runtime services provided
2086 by UEFI firmware (such as non-volatile variables, realtime
2087 clock, and platform reset). A UEFI stub is also provided to
2088 allow the kernel to be booted as an EFI application. This
2089 is only useful for kernels that may run on systems that have
2094 menu "CPU Power Management"
2096 source "drivers/cpufreq/Kconfig"
2098 source "drivers/cpuidle/Kconfig"
2102 menu "Floating point emulation"
2104 comment "At least one emulation must be selected"
2107 bool "NWFPE math emulation"
2108 depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2110 Say Y to include the NWFPE floating point emulator in the kernel.
2111 This is necessary to run most binaries. Linux does not currently
2112 support floating point hardware so you need to say Y here even if
2113 your machine has an FPA or floating point co-processor podule.
2115 You may say N here if you are going to load the Acorn FPEmulator
2116 early in the bootup.
2119 bool "Support extended precision"
2120 depends on FPE_NWFPE
2122 Say Y to include 80-bit support in the kernel floating-point
2123 emulator. Otherwise, only 32 and 64-bit support is compiled in.
2124 Note that gcc does not generate 80-bit operations by default,
2125 so in most cases this option only enlarges the size of the
2126 floating point emulator without any good reason.
2128 You almost surely want to say N here.
2131 bool "FastFPE math emulation (EXPERIMENTAL)"
2132 depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2134 Say Y here to include the FAST floating point emulator in the kernel.
2135 This is an experimental much faster emulator which now also has full
2136 precision for the mantissa. It does not support any exceptions.
2137 It is very simple, and approximately 3-6 times faster than NWFPE.
2139 It should be sufficient for most programs. It may be not suitable
2140 for scientific calculations, but you have to check this for yourself.
2141 If you do not feel you need a faster FP emulation you should better
2145 bool "VFP-format floating point maths"
2146 depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2148 Say Y to include VFP support code in the kernel. This is needed
2149 if your hardware includes a VFP unit.
2151 Please see <file:Documentation/arm/VFP/release-notes.txt> for
2152 release notes and additional status information.
2154 Say N if your target does not have VFP hardware.
2162 bool "Advanced SIMD (NEON) Extension support"
2163 depends on VFPv3 && CPU_V7
2165 Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2168 config KERNEL_MODE_NEON
2169 bool "Support for NEON in kernel mode"
2170 depends on NEON && AEABI
2172 Say Y to include support for NEON in kernel mode.
2176 menu "Userspace binary formats"
2178 source "fs/Kconfig.binfmt"
2182 menu "Power management options"
2184 source "kernel/power/Kconfig"
2186 config ARCH_SUSPEND_POSSIBLE
2187 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2188 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2191 config ARM_CPU_SUSPEND
2192 def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
2193 depends on ARCH_SUSPEND_POSSIBLE
2195 config ARCH_HIBERNATION_POSSIBLE
2198 default y if ARCH_SUSPEND_POSSIBLE
2202 source "net/Kconfig"
2204 source "drivers/Kconfig"
2206 source "drivers/firmware/Kconfig"
2210 source "arch/arm/Kconfig.debug"
2212 source "security/Kconfig"
2214 source "crypto/Kconfig"
2216 source "arch/arm/crypto/Kconfig"
2219 source "lib/Kconfig"
2221 source "arch/arm/kvm/Kconfig"