2 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
4 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
13 #include "am33xx.dtsi"
18 cpu0-supply = <&vdd1_reg>;
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
28 pinctrl-names = "default";
29 pinctrl-0 = <&leds_pins>;
31 compatible = "gpio-leds";
34 label = "com:green:user";
35 gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
40 vbat: fixedregulator@0 {
41 compatible = "regulator-fixed";
42 regulator-name = "vbat";
43 regulator-min-microvolt = <5000000>;
44 regulator-max-microvolt = <5000000>;
50 i2c0_pins: pinmux_i2c0_pins {
51 pinctrl-single,pins = <
52 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
53 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
57 nandflash_pins: pinmux_nandflash_pins {
58 pinctrl-single,pins = <
59 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
60 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
61 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
62 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
63 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
64 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
65 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
66 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
67 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
68 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
69 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
70 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
71 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
72 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
73 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
77 uart0_pins: pinmux_uart0_pins {
78 pinctrl-single,pins = <
79 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
80 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
84 leds_pins: pinmux_leds_pins {
85 pinctrl-single,pins = <
86 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
92 phy_id = <&davinci_mdio>, <0>;
96 phy_id = <&davinci_mdio>, <1>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&nandflash_pins>;
108 ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
111 reg = <0 0 0>; /* CS0, offset 0 */
112 nand-bus-width = <8>;
113 ti,nand-ecc-opt = "bch8";
114 gpmc,device-nand = "true";
115 gpmc,device-width = <1>;
116 gpmc,sync-clk-ps = <0>;
118 gpmc,cs-rd-off-ns = <44>;
119 gpmc,cs-wr-off-ns = <44>;
120 gpmc,adv-on-ns = <6>;
121 gpmc,adv-rd-off-ns = <34>;
122 gpmc,adv-wr-off-ns = <44>;
124 gpmc,we-off-ns = <40>;
126 gpmc,oe-off-ns = <54>;
127 gpmc,access-ns = <64>;
128 gpmc,rd-cycle-ns = <82>;
129 gpmc,wr-cycle-ns = <82>;
130 gpmc,wait-on-read = "true";
131 gpmc,wait-on-write = "true";
132 gpmc,bus-turnaround-ns = <0>;
133 gpmc,cycle2cycle-delay-ns = <0>;
134 gpmc,clk-activation-ns = <0>;
135 gpmc,wait-monitoring-ns = <0>;
136 gpmc,wr-access-ns = <40>;
137 gpmc,wr-data-mux-bus-ns = <0>;
139 #address-cells = <1>;
143 /* MTD partition table */
146 reg = <0x00000000 0x000080000>;
151 reg = <0x00080000 0x001e0000>;
155 label = "U-Boot Env";
156 reg = <0x00260000 0x00020000>;
161 reg = <0x00280000 0x00500000>;
165 label = "File System";
166 reg = <0x00780000 0x007880000>;
173 pinctrl-names = "default";
174 pinctrl-0 = <&i2c0_pins>;
176 clock-frequency = <400000>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&uart0_pins>;
189 #include "tps65910.dtsi"
192 vcc1-supply = <&vbat>;
193 vcc2-supply = <&vbat>;
194 vcc3-supply = <&vbat>;
195 vcc4-supply = <&vbat>;
196 vcc5-supply = <&vbat>;
197 vcc6-supply = <&vbat>;
198 vcc7-supply = <&vbat>;
199 vccio-supply = <&vbat>;
202 vrtc_reg: regulator@0 {
206 vio_reg: regulator@1 {
210 vdd1_reg: regulator@2 {
211 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
212 regulator-name = "vdd_mpu";
213 regulator-min-microvolt = <912500>;
214 regulator-max-microvolt = <1312500>;
219 vdd2_reg: regulator@3 {
220 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
221 regulator-name = "vdd_core";
222 regulator-min-microvolt = <912500>;
223 regulator-max-microvolt = <1150000>;
228 vdd3_reg: regulator@4 {
232 vdig1_reg: regulator@5 {
236 vdig2_reg: regulator@6 {
240 vpll_reg: regulator@7 {
244 vdac_reg: regulator@8 {
248 vaux1_reg: regulator@9 {
252 vaux2_reg: regulator@10 {
256 vaux33_reg: regulator@11 {
260 vmmc_reg: regulator@12 {