2 * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "am33xx.dtsi"
13 model = "Newflow AM335x NanoBone";
14 compatible = "ti,am33xx";
18 cpu0-supply = <&dcdc2_reg>;
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
28 compatible = "gpio-leds";
31 label = "nanobone:green:usr1";
33 default-state = "off";
39 pinctrl-names = "default";
40 pinctrl-0 = <&misc_pins>;
42 misc_pins: misc_pins {
43 pinctrl-single,pins = <
44 0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
48 gpmc_pins: gpmc_pins {
49 pinctrl-single,pins = <
50 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
51 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
52 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
53 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
54 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
55 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
56 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
57 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
58 0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
59 0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
60 0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
61 0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
62 0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
63 0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
64 0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
65 0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
67 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
68 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
69 0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
70 0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
71 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
73 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
74 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
75 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
76 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
78 0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
79 0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
80 0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
81 0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
82 0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
83 0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
84 0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
86 0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
87 0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
88 0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
92 i2c0_pins: i2c0_pins {
93 pinctrl-single,pins = <
94 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
95 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
99 uart0_pins: uart0_pins {
100 pinctrl-single,pins = <
101 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
102 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
106 uart1_pins: uart1_pins {
107 pinctrl-single,pins = <
108 0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
109 0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
110 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
111 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
115 uart2_pins: uart2_pins {
116 pinctrl-single,pins = <
117 0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
118 0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
119 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
120 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
124 uart3_pins: uart3_pins {
125 pinctrl-single,pins = <
126 0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
127 0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
128 0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
129 0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
133 uart4_pins: uart4_pins {
134 pinctrl-single,pins = <
135 0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
136 0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
137 0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
138 0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
142 uart5_pins: uart5_pins {
143 pinctrl-single,pins = <
144 0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
145 0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
149 mmc1_pins: mmc1_pins {
150 pinctrl-single,pins = <
151 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
152 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
153 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
154 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
155 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
156 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
157 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
158 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
164 pinctrl-names = "default";
165 pinctrl-0 = <&uart0_pins>;
170 pinctrl-names = "default";
171 pinctrl-0 = <&uart1_pins>;
173 rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
174 rs485-rts-active-high;
176 rs485-rts-delay = <1 1>;
177 linux,rs485-enabled-at-boot-time;
181 pinctrl-names = "default";
182 pinctrl-0 = <&uart2_pins>;
184 rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
185 rs485-rts-active-high;
186 rs485-rts-delay = <1 1>;
187 linux,rs485-enabled-at-boot-time;
191 pinctrl-names = "default";
192 pinctrl-0 = <&uart3_pins>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&uart4_pins>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&uart5_pins>;
210 pinctrl-names = "default";
211 clock-frequency = <400000>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&i2c0_pins>;
216 compatible = "mcp,mcp23017";
225 compatible = "mcp,24c02";
231 compatible = "dallas,ds1307";
241 compatible = "ti,am3352-gpmc";
244 gpmc,num-waitpins = <2>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&gpmc_pins>;
248 #address-cells = <2>;
250 ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */
253 reg = <0 0x00000000 0x08000000>;
254 compatible = "cfi-flash";
255 linux,mtd-name = "spansion,s29gl010p11t";
258 gpmc,mux-add-data = <2>;
260 gpmc,sync-clk-ps = <0>;
262 gpmc,cs-rd-off-ns = <160>;
263 gpmc,cs-wr-off-ns = <160>;
264 gpmc,adv-on-ns = <10>;
265 gpmc,adv-rd-off-ns = <30>;
266 gpmc,adv-wr-off-ns = <30>;
267 gpmc,oe-on-ns = <40>;
268 gpmc,oe-off-ns = <160>;
269 gpmc,we-on-ns = <40>;
270 gpmc,we-off-ns = <160>;
271 gpmc,rd-cycle-ns = <160>;
272 gpmc,wr-cycle-ns = <160>;
273 gpmc,access-ns = <150>;
274 gpmc,page-burst-access-ns = <10>;
275 gpmc,cycle2cycle-samecsen;
276 gpmc,cycle2cycle-delay-ns = <20>;
277 gpmc,wr-data-mux-bus-ns = <70>;
278 gpmc,wr-access-ns = <80>;
280 #address-cells = <1>;
286 +------------+-->0x00000000-> U-Boot start
288 | |-->0x000BFFFF-> U-Boot end
289 | |-->0x000C0000-> ENV1 start
291 | |-->0x000DFFFF-> ENV1 end
292 | |-->0x000E0000-> ENV2 start
294 | |-->0x000FFFFF-> ENV2 end
295 | |-->0x00100000-> Kernel start
297 | |-->0x004FFFFF-> Kernel end
298 | |-->0x00500000-> File system start
300 | |-->0x014FFFFF-> File system end
301 | |-->0x01500000-> User data start
303 | |-->0x03FFFFFF-> User data end
304 | |-->0x04000000-> Data storage start
306 +------------+-->0x08000000-> NOR end (Free end)
310 reg = <0x00000000 0x000c0000>; /* 768KB */
315 reg = <0x000c0000 0x00020000>; /* 128KB */
320 reg = <0x000e0000 0x00020000>; /* 128KB */
325 reg = <0x00100000 0x00400000>; /* 4MB */
330 reg = <0x00500000 0x01000000>; /* 16MB */
335 reg = <0x01500000 0x02b00000>; /* 43MB */
340 reg = <0x04000000 0x04000000>; /* 64MB */
350 phy_id = <&davinci_mdio>, <0>;
351 dual_emac_res_vlan = <1>;
355 phy_id = <&davinci_mdio>, <1>;
356 dual_emac_res_vlan = <2>;
361 vmmc-supply = <&ldo4_reg>;
362 pinctrl-names = "default";
363 pinctrl-0 = <&mmc1_pins>;
365 cd-gpios = <&gpio3 8 0>;
366 wp-gpios = <&gpio3 18 0>;
369 #include "tps65217.dtsi"
373 dcdc1_reg: regulator@0 {
374 /* +1.5V voltage with ±4% tolerance */
375 regulator-min-microvolt = <1450000>;
376 regulator-max-microvolt = <1550000>;
381 dcdc2_reg: regulator@1 {
382 /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
383 regulator-name = "vdd_mpu";
384 regulator-min-microvolt = <915000>;
385 regulator-max-microvolt = <1140000>;
390 dcdc3_reg: regulator@2 {
391 /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
392 regulator-name = "vdd_core";
393 regulator-min-microvolt = <915000>;
394 regulator-max-microvolt = <1140000>;
399 ldo1_reg: regulator@3 {
400 /* +1.8V voltage with ±4% tolerance */
401 regulator-min-microvolt = <1750000>;
402 regulator-max-microvolt = <1870000>;
407 ldo2_reg: regulator@4 {
408 /* +3.3V voltage with ±4% tolerance */
409 regulator-min-microvolt = <3175000>;
410 regulator-max-microvolt = <3430000>;
415 ldo3_reg: regulator@5 {
416 /* +1.8V voltage with ±4% tolerance */
417 regulator-min-microvolt = <1750000>;
418 regulator-max-microvolt = <1870000>;
423 ldo4_reg: regulator@6 {
424 /* +3.3V voltage with ±4% tolerance */
425 regulator-min-microvolt = <3175000>;
426 regulator-max-microvolt = <3430000>;