2 * Device Tree file for Marvell RD-AXPWiFiAP.
4 * Note: this board is shipped with a new generation boot loader that
5 * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
6 * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
9 * Copyright (C) 2013 Marvell
11 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
13 * This file is licensed under the terms of the GNU General Public
14 * License version 2. This program is licensed "as is" without any
15 * warranty of any kind, whether express or implied.
19 #include "armada-xp-mv78230.dtsi"
22 model = "Marvell RD-AXPWiFiAP";
23 compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
26 bootargs = "console=ttyS0,115200 earlyprintk";
30 device_type = "memory";
31 reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
35 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
36 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
41 /* First mini-PCIe port */
47 /* Second mini-PCIe port */
53 /* Renesas uPD720202 USB 3.0 controller */
62 pinctrl-0 = <&pmx_phy_int>;
63 pinctrl-names = "default";
66 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
67 "mpp4", "mpp5", "mpp6", "mpp7",
68 "mpp8", "mpp9", "mpp10", "mpp11";
69 marvell,function = "ge0";
73 marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
74 "mpp16", "mpp17", "mpp18", "mpp19",
75 "mpp20", "mpp21", "mpp22", "mpp23";
76 marvell,function = "ge1";
80 marvell,pins = "mpp33";
81 marvell,function = "gpio";
85 marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
86 marvell,function = "spi";
89 pmx_phy_int: pmx-phy-int {
90 marvell,pins = "mpp32";
91 marvell,function = "gpio";
96 clock-frequency = <250000000>;
101 clock-frequency = <250000000>;
111 phy0: ethernet-phy@0 {
115 phy1: ethernet-phy@1 {
121 pinctrl-0 = <&pmx_ge0>;
122 pinctrl-names = "default";
125 phy-mode = "rgmii-id";
128 pinctrl-0 = <&pmx_ge1>;
129 pinctrl-names = "default";
132 phy-mode = "rgmii-id";
137 pinctrl-0 = <&pmx_spi>;
138 pinctrl-names = "default";
141 #address-cells = <1>;
143 compatible = "n25q128a13";
144 reg = <0>; /* Chip select 0 */
145 spi-max-frequency = <108000000>;
152 compatible = "gpio-keys";
153 #address-cells = <1>;
155 pinctrl-0 = <&pmx_keys>;
156 pinctrl-names = "default";
159 label = "Factory Reset Button";
160 linux,code = <141>; /* KEY_SETUP */
161 gpios = <&gpio1 1 1>;