arch/arm/boot/dts/at91sam9g45.dtsi

   1 /*
   2  * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
   3  *                    applies to AT91SAM9G45, AT91SAM9M10,
   4  *                    AT91SAM9G46, AT91SAM9M11 SoC
   5  *
   6  *  Copyright (C) 2011 Atmel,
   7  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         model = "Atmel AT91SAM9G45 family SoC";
  16         compatible = "atmel,at91sam9g45";
  17         interrupt-parent = <&aic>;
  18
  19         aliases {
  20                 serial0 = &dbgu;
  21                 serial1 = &usart0;
  22                 serial2 = &usart1;
  23                 serial3 = &usart2;
  24                 serial4 = &usart3;
  25                 gpio0 = &pioA;
  26                 gpio1 = &pioB;
  27                 gpio2 = &pioC;
  28                 gpio3 = &pioD;
  29                 gpio4 = &pioE;
  30                 tcb0 = &tcb0;
  31                 tcb1 = &tcb1;
  32         };
  33         cpus {
  34                 cpu@0 {
  35                         compatible = "arm,arm926ejs";
  36                 };
  37         };
  38
  39         memory {
  40                 reg = <0x70000000 0x10000000>;
  41         };
  42
  43         ahb {
  44                 compatible = "simple-bus";
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 ranges;
  48
  49                 apb {
  50                         compatible = "simple-bus";
  51                         #address-cells = <1>;
  52                         #size-cells = <1>;
  53                         ranges;
  54
  55                         aic: interrupt-controller@fffff000 {
  56                                 #interrupt-cells = <3>;
  57                                 compatible = "atmel,at91rm9200-aic";
  58                                 interrupt-controller;
  59                                 reg = <0xfffff000 0x200>;
  60                                 atmel,external-irqs = <31>;
  61                         };
  62
  63                         ramc0: ramc@ffffe400 {
  64                                 compatible = "atmel,at91sam9g45-ddramc";
  65                                 reg = <0xffffe400 0x200
  66                                        0xffffe600 0x200>;
  67                         };
  68
  69                         pmc: pmc@fffffc00 {
  70                                 compatible = "atmel,at91rm9200-pmc";
  71                                 reg = <0xfffffc00 0x100>;
  72                         };
  73
  74                         rstc@fffffd00 {
  75                                 compatible = "atmel,at91sam9g45-rstc";
  76                                 reg = <0xfffffd00 0x10>;
  77                         };
  78
  79                         pit: timer@fffffd30 {
  80                                 compatible = "atmel,at91sam9260-pit";
  81                                 reg = <0xfffffd30 0xf>;
  82                                 interrupts = <1 4 7>;
  83                         };
  84
  85
  86                         shdwc@fffffd10 {
  87                                 compatible = "atmel,at91sam9rl-shdwc";
  88                                 reg = <0xfffffd10 0x10>;
  89                         };
  90
  91                         tcb0: timer@fff7c000 {
  92                                 compatible = "atmel,at91rm9200-tcb";
  93                                 reg = <0xfff7c000 0x100>;
  94                                 interrupts = <18 4 0>;
  95                         };
  96
  97                         tcb1: timer@fffd4000 {
  98                                 compatible = "atmel,at91rm9200-tcb";
  99                                 reg = <0xfffd4000 0x100>;
 100                                 interrupts = <18 4 0>;
 101                         };
 102
 103                         dma: dma-controller@ffffec00 {
 104                                 compatible = "atmel,at91sam9g45-dma";
 105                                 reg = <0xffffec00 0x200>;
 106                                 interrupts = <21 4 0>;
 107                         };
 108
 109                         pioA: gpio@fffff200 {
 110                                 compatible = "atmel,at91rm9200-gpio";
 111                                 reg = <0xfffff200 0x100>;
 112                                 interrupts = <2 4 1>;
 113                                 #gpio-cells = <2>;
 114                                 gpio-controller;
 115                                 interrupt-controller;
 116                                 #interrupt-cells = <2>;
 117                         };
 118
 119                         pioB: gpio@fffff400 {
 120                                 compatible = "atmel,at91rm9200-gpio";
 121                                 reg = <0xfffff400 0x100>;
 122                                 interrupts = <3 4 1>;
 123                                 #gpio-cells = <2>;
 124                                 gpio-controller;
 125                                 interrupt-controller;
 126                                 #interrupt-cells = <2>;
 127                         };
 128
 129                         pioC: gpio@fffff600 {
 130                                 compatible = "atmel,at91rm9200-gpio";
 131                                 reg = <0xfffff600 0x100>;
 132                                 interrupts = <4 4 1>;
 133                                 #gpio-cells = <2>;
 134                                 gpio-controller;
 135                                 interrupt-controller;
 136                                 #interrupt-cells = <2>;
 137                         };
 138
 139                         pioD: gpio@fffff800 {
 140                                 compatible = "atmel,at91rm9200-gpio";
 141                                 reg = <0xfffff800 0x100>;
 142                                 interrupts = <5 4 1>;
 143                                 #gpio-cells = <2>;
 144                                 gpio-controller;
 145                                 interrupt-controller;
 146                                 #interrupt-cells = <2>;
 147                         };
 148
 149                         pioE: gpio@fffffa00 {
 150                                 compatible = "atmel,at91rm9200-gpio";
 151                                 reg = <0xfffffa00 0x100>;
 152                                 interrupts = <5 4 1>;
 153                                 #gpio-cells = <2>;
 154                                 gpio-controller;
 155                                 interrupt-controller;
 156                                 #interrupt-cells = <2>;
 157                         };
 158
 159                         dbgu: serial@ffffee00 {
 160                                 compatible = "atmel,at91sam9260-usart";
 161                                 reg = <0xffffee00 0x200>;
 162                                 interrupts = <1 4 7>;
 163                                 status = "disabled";
 164                         };
 165
 166                         usart0: serial@fff8c000 {
 167                                 compatible = "atmel,at91sam9260-usart";
 168                                 reg = <0xfff8c000 0x200>;
 169                                 interrupts = <7 4 5>;
 170                                 atmel,use-dma-rx;
 171                                 atmel,use-dma-tx;
 172                                 status = "disabled";
 173                         };
 174
 175                         usart1: serial@fff90000 {
 176                                 compatible = "atmel,at91sam9260-usart";
 177                                 reg = <0xfff90000 0x200>;
 178                                 interrupts = <8 4 5>;
 179                                 atmel,use-dma-rx;
 180                                 atmel,use-dma-tx;
 181                                 status = "disabled";
 182                         };
 183
 184                         usart2: serial@fff94000 {
 185                                 compatible = "atmel,at91sam9260-usart";
 186                                 reg = <0xfff94000 0x200>;
 187                                 interrupts = <9 4 5>;
 188                                 atmel,use-dma-rx;
 189                                 atmel,use-dma-tx;
 190                                 status = "disabled";
 191                         };
 192
 193                         usart3: serial@fff98000 {
 194                                 compatible = "atmel,at91sam9260-usart";
 195                                 reg = <0xfff98000 0x200>;
 196                                 interrupts = <10 4 5>;
 197                                 atmel,use-dma-rx;
 198                                 atmel,use-dma-tx;
 199                                 status = "disabled";
 200                         };
 201
 202                         macb0: ethernet@fffbc000 {
 203                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
 204                                 reg = <0xfffbc000 0x100>;
 205                                 interrupts = <25 4 3>;
 206                                 status = "disabled";
 207                         };
 208
 209                         adc0: adc@fffb0000 {
 210                                 compatible = "atmel,at91sam9260-adc";
 211                                 reg = <0xfffb0000 0x100>;
 212                                 interrupts = <20 4 0>;
 213                                 atmel,adc-use-external-triggers;
 214                                 atmel,adc-channels-used = <0xff>;
 215                                 atmel,adc-vref = <3300>;
 216                                 atmel,adc-num-channels = <8>;
 217                                 atmel,adc-startup-time = <40>;
 218                                 atmel,adc-channel-base = <0x30>;
 219                                 atmel,adc-drdy-mask = <0x10000>;
 220                                 atmel,adc-status-register = <0x1c>;
 221                                 atmel,adc-trigger-register = <0x08>;
 222
 223                                 trigger@0 {
 224                                         trigger-name = "external-rising";
 225                                         trigger-value = <0x1>;
 226                                         trigger-external;
 227                                 };
 228                                 trigger@1 {
 229                                         trigger-name = "external-falling";
 230                                         trigger-value = <0x2>;
 231                                         trigger-external;
 232                                 };
 233
 234                                 trigger@2 {
 235                                         trigger-name = "external-any";
 236                                         trigger-value = <0x3>;
 237                                         trigger-external;
 238                                 };
 239
 240                                 trigger@3 {
 241                                         trigger-name = "continuous";
 242                                         trigger-value = <0x6>;
 243                                 };
 244                         };
 245                 };
 246
 247                 nand0: nand@40000000 {
 248                         compatible = "atmel,at91rm9200-nand";
 249                         #address-cells = <1>;
 250                         #size-cells = <1>;
 251                         reg = <0x40000000 0x10000000
 252                                0xffffe200 0x200
 253                               >;
 254                         atmel,nand-addr-offset = <21>;
 255                         atmel,nand-cmd-offset = <22>;
 256                         gpios = <&pioC 8 0
 257                                  &pioC 14 0
 258                                  0
 259                                 >;
 260                         status = "disabled";
 261                 };
 262
 263                 usb0: ohci@00700000 {
 264                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 265                         reg = <0x00700000 0x100000>;
 266                         interrupts = <22 4 2>;
 267                         status = "disabled";
 268                 };
 269
 270                 usb1: ehci@00800000 {
 271                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 272                         reg = <0x00800000 0x100000>;
 273                         interrupts = <22 4 2>;
 274                         status = "disabled";
 275                 };
 276         };
 277
 278         i2c@0 {
 279                 compatible = "i2c-gpio";
 280                 gpios = <&pioA 20 0 /* sda */
 281                          &pioA 21 0 /* scl */
 282                         >;
 283                 i2c-gpio,sda-open-drain;
 284                 i2c-gpio,scl-open-drain;
 285                 i2c-gpio,delay-us = <5>;        /* ~100 kHz */
 286                 #address-cells = <1>;
 287                 #size-cells = <0>;
 288                 status = "disabled";
 289         };
 290 };