]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/da850-evm.dts
Merge tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
[karo-tx-linux.git] / arch / arm / boot / dts / da850-evm.dts
1 /*
2  * Device Tree for DA850 EVM board
3  *
4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation, version 2.
9  */
10 /dts-v1/;
11 #include "da850.dtsi"
12
13 / {
14         compatible = "ti,da850-evm", "ti,da850";
15         model = "DA850/AM1808/OMAP-L138 EVM";
16
17         soc {
18                 pmx_core: pinmux@1c14120 {
19                         status = "okay";
20
21                         mcasp0_pins: pinmux_mcasp0_pins {
22                                 pinctrl-single,bits = <
23                                         /*
24                                          * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
25                                          * AFSR, AMUTE
26                                          */
27                                         0x00 0x11111111 0xffffffff
28                                         /* AXR11, AXR12 */
29                                         0x04 0x00011000 0x000ff000
30                                 >;
31                         };
32                 };
33                 serial0: serial@1c42000 {
34                         status = "okay";
35                 };
36                 serial1: serial@1d0c000 {
37                         status = "okay";
38                 };
39                 serial2: serial@1d0d000 {
40                         status = "okay";
41                 };
42                 rtc0: rtc@1c23000 {
43                         status = "okay";
44                 };
45                 i2c0: i2c@1c22000 {
46                         status = "okay";
47                         clock-frequency = <100000>;
48                         pinctrl-names = "default";
49                         pinctrl-0 = <&i2c0_pins>;
50
51                         tps: tps@48 {
52                                 reg = <0x48>;
53                         };
54                         tlv320aic3106: tlv320aic3106@18 {
55                                 #sound-dai-cells = <0>;
56                                 compatible = "ti,tlv320aic3106";
57                                 reg = <0x18>;
58                                 status = "okay";
59
60                                 /* Regulators */
61                                 IOVDD-supply = <&vdcdc2_reg>;
62                                 /* Derived from VBAT: Baseboard 3.3V / 1.8V */
63                                 AVDD-supply = <&vbat>;
64                                 DRVDD-supply = <&vbat>;
65                                 DVDD-supply = <&vbat>;
66                         };
67
68                 };
69                 wdt: wdt@1c21000 {
70                         status = "okay";
71                 };
72                 mmc0: mmc@1c40000 {
73                         max-frequency = <50000000>;
74                         bus-width = <4>;
75                         status = "okay";
76                         pinctrl-names = "default";
77                         pinctrl-0 = <&mmc0_pins>;
78                 };
79                 spi1: spi@1f0e000 {
80                         status = "okay";
81                         pinctrl-names = "default";
82                         pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
83                         flash: m25p80@0 {
84                                 #address-cells = <1>;
85                                 #size-cells = <1>;
86                                 compatible = "m25p64";
87                                 spi-max-frequency = <30000000>;
88                                 reg = <0>;
89                                 partition@0 {
90                                         label = "U-Boot-SPL";
91                                         reg = <0x00000000 0x00010000>;
92                                         read-only;
93                                 };
94                                 partition@1 {
95                                         label = "U-Boot";
96                                         reg = <0x00010000 0x00080000>;
97                                         read-only;
98                                 };
99                                 partition@2 {
100                                         label = "U-Boot-Env";
101                                         reg = <0x00090000 0x00010000>;
102                                         read-only;
103                                 };
104                                 partition@3 {
105                                         label = "Kernel";
106                                         reg = <0x000a0000 0x00280000>;
107                                 };
108                                 partition@4 {
109                                         label = "Filesystem";
110                                         reg = <0x00320000 0x00400000>;
111                                 };
112                                 partition@5 {
113                                         label = "MAC-Address";
114                                         reg = <0x007f0000 0x00010000>;
115                                         read-only;
116                                 };
117                         };
118                 };
119                 mdio: mdio@1e24000 {
120                         status = "okay";
121                         pinctrl-names = "default";
122                         pinctrl-0 = <&mdio_pins>;
123                         bus_freq = <2200000>;
124                 };
125                 eth0: ethernet@1e20000 {
126                         status = "okay";
127                         pinctrl-names = "default";
128                         pinctrl-0 = <&mii_pins>;
129                 };
130                 gpio: gpio@1e26000 {
131                         status = "okay";
132                 };
133         };
134         nand_cs3@62000000 {
135                 status = "okay";
136                 pinctrl-names = "default";
137                 pinctrl-0 = <&nand_cs3_pins>;
138         };
139         vbat: fixedregulator@0 {
140                 compatible = "regulator-fixed";
141                 regulator-name = "vbat";
142                 regulator-min-microvolt = <5000000>;
143                 regulator-max-microvolt = <5000000>;
144                 regulator-boot-on;
145         };
146
147         sound {
148                 compatible = "simple-audio-card";
149                 simple-audio-card,name = "DA850/OMAP-L138 EVM";
150                 simple-audio-card,widgets =
151                         "Line", "Line In",
152                         "Line", "Line Out";
153                 simple-audio-card,routing =
154                         "LINE1L", "Line In",
155                         "LINE1R", "Line In",
156                         "Line Out", "LLOUT",
157                         "Line Out", "RLOUT";
158                 simple-audio-card,format = "dsp_b";
159                 simple-audio-card,bitclock-master = <&link0_codec>;
160                 simple-audio-card,frame-master = <&link0_codec>;
161                 simple-audio-card,bitclock-inversion;
162
163                 simple-audio-card,cpu {
164                         sound-dai = <&mcasp0>;
165                         system-clock-frequency = <24576000>;
166                 };
167
168                 link0_codec: simple-audio-card,codec {
169                         sound-dai = <&tlv320aic3106>;
170                         system-clock-frequency = <24576000>;
171                 };
172         };
173 };
174
175 /include/ "tps6507x.dtsi"
176
177 &tps {
178         vdcdc1_2-supply = <&vbat>;
179         vdcdc3-supply = <&vbat>;
180         vldo1_2-supply = <&vbat>;
181
182         regulators {
183                 vdcdc1_reg: regulator@0 {
184                         regulator-name = "VDCDC1_3.3V";
185                         regulator-min-microvolt = <3150000>;
186                         regulator-max-microvolt = <3450000>;
187                         regulator-always-on;
188                         regulator-boot-on;
189                 };
190
191                 vdcdc2_reg: regulator@1 {
192                         regulator-name = "VDCDC2_3.3V";
193                         regulator-min-microvolt = <1710000>;
194                         regulator-max-microvolt = <3450000>;
195                         regulator-always-on;
196                         regulator-boot-on;
197                         ti,defdcdc_default = <1>;
198                 };
199
200                 vdcdc3_reg: regulator@2 {
201                         regulator-name = "VDCDC3_1.2V";
202                         regulator-min-microvolt = <950000>;
203                         regulator-max-microvolt = <1350000>;
204                         regulator-always-on;
205                         regulator-boot-on;
206                         ti,defdcdc_default = <1>;
207                 };
208
209                 ldo1_reg: regulator@3 {
210                         regulator-name = "LDO1_1.8V";
211                         regulator-min-microvolt = <1710000>;
212                         regulator-max-microvolt = <1890000>;
213                         regulator-always-on;
214                         regulator-boot-on;
215                 };
216
217                 ldo2_reg: regulator@4 {
218                         regulator-name = "LDO2_1.2V";
219                         regulator-min-microvolt = <1140000>;
220                         regulator-max-microvolt = <1320000>;
221                         regulator-always-on;
222                         regulator-boot-on;
223                 };
224         };
225 };
226
227 &mcasp0 {
228         #sound-dai-cells = <0>;
229         status = "okay";
230         pinctrl-names = "default";
231         pinctrl-0 = <&mcasp0_pins>;
232
233         op-mode = <0>;          /* MCASP_IIS_MODE */
234         tdm-slots = <2>;
235         /* 4 serializer */
236         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
237                 0 0 0 0
238                 0 0 0 0
239                 0 0 0 1
240                 2 0 0 0
241         >;
242         tx-num-evt = <32>;
243         rx-num-evt = <32>;
244 };
245
246 &edma0 {
247         ti,edma-reserved-slot-ranges = <32 50>;
248 };
249
250 &edma1 {
251         ti,edma-reserved-slot-ranges = <32 90>;
252 };