2 * Samsung's Exynos3250 based Rinato board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Rinato board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include "exynos4412-ppmu-common.dtsi"
18 #include <dt-bindings/input/input.h>
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/clock/samsung,s2mps11.h>
23 model = "Samsung Rinato board";
24 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
31 device_type = "memory";
32 reg = <0x40000000 0x1ff00000>;
36 compatible = "samsung,secure-firmware";
37 reg = <0x0205F000 0x1000>;
41 compatible = "gpio-keys";
44 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_POWER>;
47 debounce-interval = <10>;
52 i2c_max77836: i2c-gpio-0 {
53 compatible = "i2c-gpio";
54 gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
58 max77836: subpmic@25 {
59 compatible = "maxim,max77836";
60 interrupt-parent = <&gpx1>;
61 interrupts = <5 IRQ_TYPE_NONE>;
66 compatible = "maxim,max77836-muic";
70 compatible = "maxim,max77836-regulator";
71 safeout_reg: SAFEOUT {
72 regulator-name = "SAFEOUT";
75 charger_reg: CHARGER {
76 regulator-name = "CHARGER";
77 regulator-min-microamp = <45000>;
78 regulator-max-microamp = <475000>;
83 regulator-name = "MOT_2.7V";
84 regulator-min-microvolt = <1100000>;
85 regulator-max-microvolt = <2700000>;
89 regulator-name = "UNUSED_LDO2";
90 regulator-min-microvolt = <800000>;
91 regulator-max-microvolt = <3950000>;
96 compatible = "maxim,max77836-charger";
98 maxim,constant-uvolt = <4350000>;
99 maxim,fast-charge-uamp = <225000>;
100 maxim,eoc-uamp = <7500>;
101 maxim,ovp-uvolt = <6500000>;
107 compatible = "regulator-haptic";
108 haptic-supply = <&motor_reg>;
109 min-microvolt = <1100000>;
110 max-microvolt = <2700000>;
114 cpu_thermal: cpu-thermal {
117 /* Corresponds to 500MHz */
118 cooling-device = <&cpu0 5 5>;
121 /* Corresponds to 200MHz */
122 cooling-device = <&cpu0 8 8>;
130 vdd-supply = <&ldo3_reg>;
132 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
133 assigned-clock-rates = <6000000>;
136 compatible = "ntc,ncp15wb473";
137 pullup-uv = <1800000>;
138 pullup-ohm = <100000>;
139 pulldown-ohm = <100000>;
140 io-channels = <&adc 0>;
144 compatible = "ntc,ncp15wb473";
145 pullup-uv = <1800000>;
146 pullup-ohm = <100000>;
147 pulldown-ohm = <100000>;
148 io-channels = <&adc 1>;
153 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
154 vdd-supply = <&buck1_reg>;
159 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
160 vdd-supply = <&buck3_reg>;
165 devfreq = <&bus_leftbus>;
170 devfreq = <&bus_leftbus>;
175 devfreq = <&bus_leftbus>;
180 devfreq = <&bus_leftbus>;
185 devfreq = <&bus_leftbus>;
190 devfreq = <&bus_leftbus>;
195 devfreq = <&bus_leftbus>;
200 cpu0-supply = <&buck2_reg>;
205 vbus-supply = <&safeout_reg>;
209 vusb_d-supply = <&ldo15_reg>;
210 vusb_a-supply = <&ldo12_reg>;
211 dr_mode = "peripheral";
216 vddcore-supply = <&ldo6_reg>;
217 vddio-supply = <&ldo6_reg>;
218 samsung,burst-clock-frequency = <250000000>;
219 samsung,esc-clock-frequency = <20000000>;
220 samsung,pll-clock-frequency = <24000000>;
224 #address-cells = <1>;
231 remote-endpoint = <&dsi_in>;
232 samsung,burst-clock-frequency = <250000000>;
233 samsung,esc-clock-frequency = <20000000>;
239 compatible = "samsung,s6e63j0x03";
241 vdd3-supply = <&ldo16_reg>;
242 vci-supply = <&ldo20_reg>;
243 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
244 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
245 power-on-delay= <30>;
246 power-off-delay= <120>;
251 panel-width-mm = <29>;
252 panel-height-mm = <29>;
256 clock-frequency = <4600000>;
262 vfront-porch = <150>;
270 remote-endpoint = <&dsi_out>;
288 #address-cells = <1>;
290 samsung,i2c-sda-delay = <100>;
291 samsung,i2c-slave-addr = <0x10>;
292 samsung,i2c-max-bus-freq = <100000>;
296 compatible = "samsung,s2mps14-pmic";
297 interrupt-parent = <&gpx0>;
298 interrupts = <7 IRQ_TYPE_NONE>;
302 s2mps14_osc: clocks {
303 compatible = "samsung,s2mps14-clk";
305 clock-output-names = "s2mps14_ap", "unused",
311 regulator-name = "VAP_ALIVE_1.0V";
312 regulator-min-microvolt = <1000000>;
313 regulator-max-microvolt = <1000000>;
316 regulator-state-mem {
317 regulator-on-in-suspend;
322 regulator-name = "VAP_M1_1.2V";
323 regulator-min-microvolt = <1200000>;
324 regulator-max-microvolt = <1200000>;
327 regulator-state-mem {
328 regulator-off-in-suspend;
333 regulator-name = "VCC_AP_1.8V";
334 regulator-min-microvolt = <1800000>;
335 regulator-max-microvolt = <1800000>;
338 regulator-state-mem {
339 regulator-off-in-suspend;
344 regulator-name = "VAP_AVDD_PLL1";
345 regulator-min-microvolt = <1800000>;
346 regulator-max-microvolt = <1800000>;
349 regulator-state-mem {
350 regulator-off-in-suspend;
355 regulator-name = "VAP_PLL_ISO_1.0V";
356 regulator-min-microvolt = <1000000>;
357 regulator-max-microvolt = <1000000>;
360 regulator-state-mem {
361 regulator-off-in-suspend;
366 regulator-name = "VAP_VMIPI_1.0V";
367 regulator-min-microvolt = <1000000>;
368 regulator-max-microvolt = <1000000>;
371 regulator-state-mem {
372 regulator-off-in-suspend;
377 regulator-name = "VAP_AVDD_1.8V";
378 regulator-min-microvolt = <1800000>;
379 regulator-max-microvolt = <1800000>;
382 regulator-state-mem {
383 regulator-off-in-suspend;
388 regulator-name = "VAP_USB_3.0V";
389 regulator-min-microvolt = <3000000>;
390 regulator-max-microvolt = <3000000>;
393 regulator-state-mem {
394 regulator-off-in-suspend;
399 regulator-name = "V_LPDDR_1.2V";
400 regulator-min-microvolt = <1200000>;
401 regulator-max-microvolt = <1200000>;
404 regulator-state-mem {
405 regulator-on-in-suspend;
410 regulator-name = "UNUSED_LDO10";
411 regulator-min-microvolt = <1000000>;
412 regulator-max-microvolt = <1000000>;
414 regulator-state-mem {
415 regulator-off-in-suspend;
420 regulator-name = "V_EMMC_1.8V";
421 regulator-min-microvolt = <1800000>;
422 regulator-max-microvolt = <1800000>;
423 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
427 regulator-name = "V_EMMC_2.8V";
428 regulator-min-microvolt = <2800000>;
429 regulator-max-microvolt = <2800000>;
430 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
434 regulator-name = "CAM_AVDD_2.8V";
435 regulator-min-microvolt = <2800000>;
436 regulator-max-microvolt = <2800000>;
438 regulator-state-mem {
439 regulator-off-in-suspend;
444 regulator-name = "UNUSED_LDO14";
445 regulator-min-microvolt = <2700000>;
446 regulator-max-microvolt = <2700000>;
448 regulator-state-mem {
449 regulator-off-in-suspend;
454 regulator-name = "TSP_AVDD_3.3V";
455 regulator-min-microvolt = <3300000>;
456 regulator-max-microvolt = <3300000>;
458 regulator-state-mem {
459 regulator-off-in-suspend;
464 regulator-name = "LCD_VDD_3.3V";
465 regulator-min-microvolt = <3300000>;
466 regulator-max-microvolt = <3300000>;
468 regulator-state-mem {
469 regulator-off-in-suspend;
474 regulator-name = "V_IRLED_3.3V";
475 regulator-min-microvolt = <3300000>;
476 regulator-max-microvolt = <3300000>;
478 regulator-state-mem {
479 regulator-off-in-suspend;
484 regulator-name = "CAM_AF_2.8V";
485 regulator-min-microvolt = <2800000>;
486 regulator-max-microvolt = <2800000>;
488 regulator-state-mem {
489 regulator-off-in-suspend;
494 regulator-name = "TSP_VDD_1.8V";
495 regulator-min-microvolt = <1800000>;
496 regulator-max-microvolt = <1800000>;
498 regulator-state-mem {
499 regulator-off-in-suspend;
504 regulator-name = "LCD_VDD_1.8V";
505 regulator-min-microvolt = <1800000>;
506 regulator-max-microvolt = <1800000>;
508 regulator-state-mem {
509 regulator-off-in-suspend;
514 regulator-name = "CAM_IO_1.8V";
515 regulator-min-microvolt = <1800000>;
516 regulator-max-microvolt = <1800000>;
518 regulator-state-mem {
519 regulator-off-in-suspend;
524 regulator-name = "CAM_DVDD_1.2V";
525 regulator-min-microvolt = <1200000>;
526 regulator-max-microvolt = <1200000>;
528 regulator-state-mem {
529 regulator-off-in-suspend;
534 regulator-name = "HRM_VCC_1.8V";
535 regulator-min-microvolt = <1800000>;
536 regulator-max-microvolt = <1800000>;
541 regulator-name = "HRM_VCC_3.3V";
542 regulator-min-microvolt = <3000000>;
543 regulator-max-microvolt = <3000000>;
545 regulator-state-mem {
546 regulator-off-in-suspend;
551 regulator-name = "UNUSED_LDO25";
552 regulator-min-microvolt = <3000000>;
553 regulator-max-microvolt = <3000000>;
555 regulator-state-mem {
556 regulator-off-in-suspend;
561 regulator-name = "VAP_MIF_1.0V";
562 regulator-min-microvolt = <800000>;
563 regulator-max-microvolt = <900000>;
566 regulator-state-mem {
567 regulator-off-in-suspend;
572 regulator-name = "VAP_ARM_1.0V";
573 regulator-min-microvolt = <850000>;
574 regulator-max-microvolt = <1150000>;
577 regulator-state-mem {
578 regulator-off-in-suspend;
583 regulator-name = "VAP_INT3D_1.0V";
584 regulator-min-microvolt = <850000>;
585 regulator-max-microvolt = <1000000>;
588 regulator-state-mem {
589 regulator-off-in-suspend;
594 regulator-name = "VCC_SUB_1.95V";
595 regulator-min-microvolt = <1950000>;
596 regulator-max-microvolt = <1950000>;
599 regulator-state-mem {
600 regulator-on-in-suspend;
605 regulator-name = "VCC_SUB_1.35V";
606 regulator-min-microvolt = <1350000>;
607 regulator-max-microvolt = <1350000>;
610 regulator-state-mem {
611 regulator-on-in-suspend;
619 #address-cells = <1>;
621 samsung,i2c-sda-delay = <100>;
622 samsung,i2c-slave-addr = <0x10>;
623 samsung,i2c-max-bus-freq = <400000>;
627 compatible = "maxim,max77836-battery";
628 interrupt-parent = <&gpx1>;
629 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
643 #address-cells = <1>;
651 card-detect-delay = <200>;
652 vmmc-supply = <&ldo12_reg>;
653 clock-frequency = <100000000>;
654 max-frequency = <100000000>;
655 samsung,dw-mshc-ciu-div = <1>;
656 samsung,dw-mshc-sdr-timing = <0 1>;
657 samsung,dw-mshc-ddr-timing = <1 2>;
658 pinctrl-names = "default";
659 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
665 assigned-clocks = <&cmu CLK_SCLK_UART0>;
666 assigned-clock-rates = <100000000>;
675 vtmu-supply = <&ldo7_reg>;
680 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
681 clock-names = "rtc", "rtc_src";
686 clock-frequency = <24000000>;
690 pinctrl-names = "default";
691 pinctrl-0 = <&initial0 &sleep0>;
693 initial0: initial-state {
694 PIN_IN(gpa1-4, DOWN, LV1);
695 PIN_IN(gpa1-5, DOWN, LV1);
697 PIN_IN(gpc0-0, DOWN, LV1);
698 PIN_IN(gpc0-1, DOWN, LV1);
699 PIN_IN(gpc0-2, DOWN, LV1);
700 PIN_IN(gpc0-3, DOWN, LV1);
701 PIN_IN(gpc0-4, DOWN, LV1);
703 PIN_IN(gpd0-0, DOWN, LV1);
704 PIN_IN(gpd0-1, DOWN, LV1);
707 sleep0: sleep-state {
708 PIN_SLP(gpa0-0, INPUT, DOWN);
709 PIN_SLP(gpa0-1, INPUT, DOWN);
710 PIN_SLP(gpa0-2, INPUT, DOWN);
711 PIN_SLP(gpa0-3, INPUT, DOWN);
712 PIN_SLP(gpa0-4, INPUT, DOWN);
713 PIN_SLP(gpa0-5, INPUT, DOWN);
714 PIN_SLP(gpa0-6, INPUT, DOWN);
715 PIN_SLP(gpa0-7, INPUT, DOWN);
717 PIN_SLP(gpa1-0, INPUT, DOWN);
718 PIN_SLP(gpa1-1, INPUT, DOWN);
719 PIN_SLP(gpa1-2, INPUT, DOWN);
720 PIN_SLP(gpa1-3, INPUT, DOWN);
721 PIN_SLP(gpa1-4, INPUT, DOWN);
722 PIN_SLP(gpa1-5, INPUT, DOWN);
724 PIN_SLP(gpb-0, PREV, NONE);
725 PIN_SLP(gpb-1, PREV, NONE);
726 PIN_SLP(gpb-2, PREV, NONE);
727 PIN_SLP(gpb-3, PREV, NONE);
728 PIN_SLP(gpb-4, INPUT, DOWN);
729 PIN_SLP(gpb-5, INPUT, DOWN);
730 PIN_SLP(gpb-6, INPUT, DOWN);
731 PIN_SLP(gpb-7, INPUT, DOWN);
733 PIN_SLP(gpc0-0, INPUT, DOWN);
734 PIN_SLP(gpc0-1, INPUT, DOWN);
735 PIN_SLP(gpc0-2, INPUT, DOWN);
736 PIN_SLP(gpc0-3, INPUT, DOWN);
737 PIN_SLP(gpc0-4, INPUT, DOWN);
739 PIN_SLP(gpc1-0, INPUT, DOWN);
740 PIN_SLP(gpc1-1, INPUT, DOWN);
741 PIN_SLP(gpc1-2, INPUT, DOWN);
742 PIN_SLP(gpc1-3, INPUT, DOWN);
743 PIN_SLP(gpc1-4, INPUT, DOWN);
745 PIN_SLP(gpd0-0, INPUT, DOWN);
746 PIN_SLP(gpd0-1, INPUT, DOWN);
747 PIN_SLP(gpd0-2, INPUT, NONE);
748 PIN_SLP(gpd0-3, INPUT, NONE);
750 PIN_SLP(gpd1-0, INPUT, NONE);
751 PIN_SLP(gpd1-1, INPUT, NONE);
752 PIN_SLP(gpd1-2, INPUT, NONE);
753 PIN_SLP(gpd1-3, INPUT, NONE);
758 pinctrl-names = "default";
759 pinctrl-0 = <&initial1 &sleep1>;
761 initial1: initial-state {
762 PIN_IN(gpe0-6, DOWN, LV1);
763 PIN_IN(gpe0-7, DOWN, LV1);
765 PIN_IN(gpe1-0, DOWN, LV1);
766 PIN_IN(gpe1-3, DOWN, LV1);
767 PIN_IN(gpe1-4, DOWN, LV1);
768 PIN_IN(gpe1-5, DOWN, LV1);
769 PIN_IN(gpe1-6, DOWN, LV1);
771 PIN_IN(gpk2-0, DOWN, LV1);
772 PIN_IN(gpk2-1, DOWN, LV1);
773 PIN_IN(gpk2-2, DOWN, LV1);
774 PIN_IN(gpk2-3, DOWN, LV1);
775 PIN_IN(gpk2-4, DOWN, LV1);
776 PIN_IN(gpk2-5, DOWN, LV1);
777 PIN_IN(gpk2-6, DOWN, LV1);
779 PIN_IN(gpm0-0, DOWN, LV1);
780 PIN_IN(gpm0-1, DOWN, LV1);
781 PIN_IN(gpm0-2, DOWN, LV1);
782 PIN_IN(gpm0-3, DOWN, LV1);
783 PIN_IN(gpm0-4, DOWN, LV1);
784 PIN_IN(gpm0-5, DOWN, LV1);
785 PIN_IN(gpm0-6, DOWN, LV1);
786 PIN_IN(gpm0-7, DOWN, LV1);
788 PIN_IN(gpm1-0, DOWN, LV1);
789 PIN_IN(gpm1-1, DOWN, LV1);
790 PIN_IN(gpm1-2, DOWN, LV1);
791 PIN_IN(gpm1-3, DOWN, LV1);
792 PIN_IN(gpm1-4, DOWN, LV1);
793 PIN_IN(gpm1-5, DOWN, LV1);
794 PIN_IN(gpm1-6, DOWN, LV1);
796 PIN_IN(gpm2-0, DOWN, LV1);
797 PIN_IN(gpm2-1, DOWN, LV1);
799 PIN_IN(gpm3-0, DOWN, LV1);
800 PIN_IN(gpm3-1, DOWN, LV1);
801 PIN_IN(gpm3-2, DOWN, LV1);
802 PIN_IN(gpm3-3, DOWN, LV1);
803 PIN_IN(gpm3-4, DOWN, LV1);
805 PIN_IN(gpm4-1, DOWN, LV1);
806 PIN_IN(gpm4-2, DOWN, LV1);
807 PIN_IN(gpm4-3, DOWN, LV1);
808 PIN_IN(gpm4-4, DOWN, LV1);
809 PIN_IN(gpm4-5, DOWN, LV1);
810 PIN_IN(gpm4-6, DOWN, LV1);
811 PIN_IN(gpm4-7, DOWN, LV1);
814 sleep1: sleep-state {
815 PIN_SLP(gpe0-0, PREV, NONE);
816 PIN_SLP(gpe0-1, PREV, NONE);
817 PIN_SLP(gpe0-2, INPUT, DOWN);
818 PIN_SLP(gpe0-3, INPUT, UP);
819 PIN_SLP(gpe0-4, INPUT, DOWN);
820 PIN_SLP(gpe0-5, INPUT, DOWN);
821 PIN_SLP(gpe0-6, INPUT, DOWN);
822 PIN_SLP(gpe0-7, INPUT, DOWN);
824 PIN_SLP(gpe1-0, INPUT, DOWN);
825 PIN_SLP(gpe1-1, PREV, NONE);
826 PIN_SLP(gpe1-2, INPUT, DOWN);
827 PIN_SLP(gpe1-3, INPUT, DOWN);
828 PIN_SLP(gpe1-4, INPUT, DOWN);
829 PIN_SLP(gpe1-5, INPUT, DOWN);
830 PIN_SLP(gpe1-6, INPUT, DOWN);
831 PIN_SLP(gpe1-7, INPUT, NONE);
833 PIN_SLP(gpe2-0, INPUT, NONE);
834 PIN_SLP(gpe2-1, INPUT, NONE);
835 PIN_SLP(gpe2-2, INPUT, NONE);
837 PIN_SLP(gpk0-0, INPUT, DOWN);
838 PIN_SLP(gpk0-1, INPUT, DOWN);
839 PIN_SLP(gpk0-2, OUT0, NONE);
840 PIN_SLP(gpk0-3, INPUT, DOWN);
841 PIN_SLP(gpk0-4, INPUT, DOWN);
842 PIN_SLP(gpk0-5, INPUT, DOWN);
843 PIN_SLP(gpk0-6, INPUT, DOWN);
844 PIN_SLP(gpk0-7, INPUT, DOWN);
846 PIN_SLP(gpk1-0, INPUT, DOWN);
847 PIN_SLP(gpk1-1, INPUT, DOWN);
848 PIN_SLP(gpk1-2, INPUT, DOWN);
849 PIN_SLP(gpk1-3, INPUT, DOWN);
850 PIN_SLP(gpk1-4, INPUT, DOWN);
851 PIN_SLP(gpk1-5, INPUT, DOWN);
852 PIN_SLP(gpk1-6, INPUT, DOWN);
854 PIN_SLP(gpk2-0, INPUT, DOWN);
855 PIN_SLP(gpk2-1, INPUT, DOWN);
856 PIN_SLP(gpk2-2, INPUT, DOWN);
857 PIN_SLP(gpk2-3, INPUT, DOWN);
858 PIN_SLP(gpk2-4, INPUT, DOWN);
859 PIN_SLP(gpk2-5, INPUT, DOWN);
860 PIN_SLP(gpk2-6, INPUT, DOWN);
862 PIN_SLP(gpl0-0, INPUT, DOWN);
863 PIN_SLP(gpl0-1, INPUT, DOWN);
864 PIN_SLP(gpl0-2, INPUT, DOWN);
865 PIN_SLP(gpl0-3, INPUT, DOWN);
867 PIN_SLP(gpm0-0, INPUT, DOWN);
868 PIN_SLP(gpm0-1, INPUT, DOWN);
869 PIN_SLP(gpm0-2, INPUT, DOWN);
870 PIN_SLP(gpm0-3, INPUT, DOWN);
871 PIN_SLP(gpm0-4, INPUT, DOWN);
872 PIN_SLP(gpm0-5, INPUT, DOWN);
873 PIN_SLP(gpm0-6, INPUT, DOWN);
874 PIN_SLP(gpm0-7, INPUT, DOWN);
876 PIN_SLP(gpm1-0, INPUT, DOWN);
877 PIN_SLP(gpm1-1, INPUT, DOWN);
878 PIN_SLP(gpm1-2, INPUT, DOWN);
879 PIN_SLP(gpm1-3, INPUT, DOWN);
880 PIN_SLP(gpm1-4, INPUT, DOWN);
881 PIN_SLP(gpm1-5, INPUT, DOWN);
882 PIN_SLP(gpm1-6, INPUT, DOWN);
884 PIN_SLP(gpm2-0, INPUT, DOWN);
885 PIN_SLP(gpm2-1, INPUT, DOWN);
886 PIN_SLP(gpm2-2, INPUT, DOWN);
887 PIN_SLP(gpm2-3, INPUT, DOWN);
888 PIN_SLP(gpm2-4, INPUT, DOWN);
890 PIN_SLP(gpm3-0, INPUT, DOWN);
891 PIN_SLP(gpm3-1, INPUT, DOWN);
892 PIN_SLP(gpm3-2, INPUT, DOWN);
893 PIN_SLP(gpm3-3, INPUT, DOWN);
894 PIN_SLP(gpm3-4, INPUT, DOWN);
895 PIN_SLP(gpm3-5, INPUT, DOWN);
896 PIN_SLP(gpm3-6, INPUT, DOWN);
897 PIN_SLP(gpm3-7, INPUT, DOWN);
899 PIN_SLP(gpm4-0, INPUT, DOWN);
900 PIN_SLP(gpm4-1, INPUT, DOWN);
901 PIN_SLP(gpm4-2, INPUT, DOWN);
902 PIN_SLP(gpm4-3, INPUT, DOWN);
903 PIN_SLP(gpm4-4, INPUT, DOWN);
904 PIN_SLP(gpm4-5, INPUT, DOWN);
905 PIN_SLP(gpm4-6, INPUT, DOWN);
906 PIN_SLP(gpm4-7, INPUT, DOWN);