2 * Samsung's Exynos4412 based Trats 2 board device tree source
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos4412.dtsi"
17 #include "exynos4412-ppmu-common.dtsi"
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/interrupt-controller/irq.h>
20 #include <dt-bindings/clock/maxim,max77686.h>
23 model = "Samsung Trats 2 based on Exynos4412";
24 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
29 i2c11 = &i2c_max77693;
30 i2c12 = &i2c_max77693_fuel;
34 reg = <0x40000000 0x40000000>;
38 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
39 stdout-path = &serial_2;
43 compatible = "samsung,secure-firmware";
44 reg = <0x0204F000 0x1000>;
49 compatible = "samsung,clock-xxti", "fixed-clock";
50 clock-frequency = <0>;
54 compatible = "samsung,clock-xusbxti", "fixed-clock";
55 clock-frequency = <24000000>;
60 compatible = "simple-bus";
64 cam_io_reg: voltage-regulator-1 {
65 compatible = "regulator-fixed";
66 regulator-name = "CAM_SENSOR_A";
67 regulator-min-microvolt = <2800000>;
68 regulator-max-microvolt = <2800000>;
69 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
73 lcd_vdd3_reg: voltage-regulator-2 {
74 compatible = "regulator-fixed";
75 regulator-name = "LCD_VDD_2.2V";
76 regulator-min-microvolt = <2200000>;
77 regulator-max-microvolt = <2200000>;
78 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
82 cam_af_reg: voltage-regulator-3 {
83 compatible = "regulator-fixed";
84 regulator-name = "CAM_AF";
85 regulator-min-microvolt = <2800000>;
86 regulator-max-microvolt = <2800000>;
87 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
91 ps_als_reg: voltage-regulator-5 {
92 compatible = "regulator-fixed";
93 regulator-name = "LED_A_3.0V";
94 regulator-min-microvolt = <3000000>;
95 regulator-max-microvolt = <3000000>;
96 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
102 compatible = "gpio-keys";
105 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
107 label = "volume down";
108 debounce-interval = <10>;
112 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
115 debounce-interval = <10>;
119 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
122 debounce-interval = <10>;
127 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
130 debounce-inteval = <10>;
135 i2c_max77693: i2c-gpio-1 {
136 compatible = "i2c-gpio";
137 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
138 i2c-gpio,delay-us = <2>;
139 #address-cells = <1>;
144 compatible = "maxim,max77693";
145 interrupt-parent = <&gpx1>;
150 esafeout1_reg: ESAFEOUT1 {
151 regulator-name = "ESAFEOUT1";
153 esafeout2_reg: ESAFEOUT2 {
154 regulator-name = "ESAFEOUT2";
156 charger_reg: CHARGER {
157 regulator-name = "CHARGER";
158 regulator-min-microamp = <60000>;
159 regulator-max-microamp = <2580000>;
164 compatible = "maxim,max77693-haptic";
165 haptic-supply = <&ldo26_reg>;
166 pwms = <&pwm 0 38022 0>;
170 compatible = "maxim,max77693-charger";
172 maxim,constant-microvolt = <4350000>;
173 maxim,min-system-microvolt = <3600000>;
174 maxim,thermal-regulation-celsius = <100>;
175 maxim,battery-overcurrent-microamp = <3500000>;
176 maxim,charge-input-threshold-microvolt = <4300000>;
181 i2c_max77693_fuel: i2c-gpio-3 {
182 compatible = "i2c-gpio";
183 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
184 i2c-gpio,delay-us = <2>;
185 #address-cells = <1>;
189 max77693-fuel-gauge@36 {
190 compatible = "maxim,max17047";
191 interrupt-parent = <&gpx2>;
192 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
195 maxim,over-heat-temp = <700>;
196 maxim,over-volt = <4500>;
200 i2c_ak8975: i2c-gpio-0 {
201 compatible = "i2c-gpio";
202 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
203 i2c-gpio,delay-us = <2>;
204 #address-cells = <1>;
209 compatible = "asahi-kasei,ak8975";
211 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
215 i2c_cm36651: i2c-gpio-2 {
216 compatible = "i2c-gpio";
217 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
218 i2c-gpio,delay-us = <2>;
219 #address-cells = <1>;
223 compatible = "capella,cm36651";
225 interrupt-parent = <&gpx0>;
227 vled-supply = <&ps_als_reg>;
232 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
233 pinctrl-names = "default";
235 assigned-clocks = <&clock CLK_MOUT_CAM0>,
236 <&clock CLK_MOUT_CAM1>;
237 assigned-clock-parents = <&clock CLK_XUSBXTI>,
238 <&clock CLK_XUSBXTI>;
244 compatible = "samsung,trats2-audio";
245 samsung,i2s-controller = <&i2s0>;
246 samsung,model = "Trats2";
247 samsung,audio-codec = <&wm1811>;
248 samsung,audio-routing =
256 compatible = "murata,ncp15wb473";
257 pullup-uv = <1800000>; /* VCC_1.8V_AP */
258 pullup-ohm = <100000>; /* 100K */
259 pulldown-ohm = <100000>; /* 100K */
260 io-channels = <&adc 1>; /* AP temperature */
264 compatible = "murata,ncp15wb473";
265 pullup-uv = <1800000>; /* VCC_1.8V_AP */
266 pullup-ohm = <100000>; /* 100K */
267 pulldown-ohm = <100000>; /* 100K */
268 io-channels = <&adc 2>; /* Battery temperature */
272 cpu_thermal: cpu-thermal {
275 /* Corresponds to 800MHz at freq_table */
276 cooling-device = <&cpu0 7 7>;
279 /* Corresponds to 200MHz at freq_table */
280 cooling-device = <&cpu0 13 13>;
288 vdd-supply = <&ldo3_reg>;
293 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
294 vdd-supply = <&buck1_reg>;
299 devfreq = <&bus_dmc>;
304 devfreq = <&bus_dmc>;
309 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
310 vdd-supply = <&buck3_reg>;
315 devfreq = <&bus_leftbus>;
320 devfreq = <&bus_leftbus>;
325 devfreq = <&bus_leftbus>;
330 devfreq = <&bus_leftbus>;
335 devfreq = <&bus_leftbus>;
340 cpu0-supply = <&buck2_reg>;
345 vddcore-supply = <&ldo8_reg>;
346 vddio-supply = <&ldo10_reg>;
347 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
348 <&clock CLK_SCLK_CSIS0>;
349 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
350 assigned-clock-rates = <0>, <176000000>;
352 /* Camera C (3) MIPI CSI-2 (CSIS0) */
356 remote-endpoint = <&s5c73m3_ep>;
357 data-lanes = <1 2 3 4>;
358 samsung,csis-hs-settle = <12>;
365 vddcore-supply = <&ldo8_reg>;
366 vddio-supply = <&ldo10_reg>;
367 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
368 <&clock CLK_SCLK_CSIS1>;
369 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
370 assigned-clock-rates = <0>, <176000000>;
372 /* Camera D (4) MIPI CSI-2 (CSIS1) */
376 remote-endpoint = <&is_s5k6a3_ep>;
378 samsung,csis-hs-settle = <18>;
385 vddcore-supply = <&ldo8_reg>;
386 vddio-supply = <&ldo10_reg>;
387 samsung,pll-clock-frequency = <24000000>;
391 #address-cells = <1>;
398 remote-endpoint = <&dsi_in>;
399 samsung,burst-clock-frequency = <500000000>;
400 samsung,esc-clock-frequency = <20000000>;
406 compatible = "samsung,s6e8aa0";
408 vdd3-supply = <&lcd_vdd3_reg>;
409 vci-supply = <&ldo25_reg>;
410 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
411 power-on-delay= <50>;
416 panel-width-mm = <58>;
417 panel-height-mm = <103>;
421 clock-frequency = <57153600>;
435 remote-endpoint = <&dsi_out>;
442 vbus-supply = <&esafeout1_reg>;
448 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
449 <&clock CLK_SCLK_FIMC0>;
450 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
451 assigned-clock-rates = <0>, <176000000>;
456 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
457 <&clock CLK_SCLK_FIMC1>;
458 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
459 assigned-clock-rates = <0>, <176000000>;
464 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
465 <&clock CLK_SCLK_FIMC2>;
466 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
467 assigned-clock-rates = <0>, <176000000>;
472 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
473 <&clock CLK_SCLK_FIMC3>;
474 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
475 assigned-clock-rates = <0>, <176000000>;
479 pinctrl-0 = <&fimc_is_uart>;
480 pinctrl-names = "default";
483 i2c1_isp: i2c-isp@12140000 {
484 pinctrl-0 = <&fimc_is_i2c1>;
485 pinctrl-names = "default";
488 compatible = "samsung,s5k6a3";
490 svdda-supply = <&cam_io_reg>;
491 svddio-supply = <&ldo19_reg>;
492 afvdd-supply = <&ldo19_reg>;
493 clock-frequency = <24000000>;
495 clocks = <&camera 1>;
496 clock-names = "extclk";
497 samsung,camclk-out = <1>;
498 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
501 is_s5k6a3_ep: endpoint {
502 remote-endpoint = <&csis1_ep>;
523 vusb_d-supply = <&ldo15_reg>;
524 vusb_a-supply = <&ldo12_reg>;
525 dr_mode = "peripheral";
530 samsung,i2c-sda-delay = <100>;
531 samsung,i2c-slave-addr = <0x10>;
532 samsung,i2c-max-bus-freq = <400000>;
533 pinctrl-0 = <&i2c0_bus>;
534 pinctrl-names = "default";
538 compatible = "samsung,s5c73m3";
540 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
541 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
542 vdd-int-supply = <&buck9_reg>;
543 vddio-cis-supply = <&ldo9_reg>;
544 vdda-supply = <&ldo17_reg>;
545 vddio-host-supply = <&ldo18_reg>;
546 vdd-af-supply = <&cam_af_reg>;
547 vdd-reg-supply = <&cam_io_reg>;
548 clock-frequency = <24000000>;
550 clocks = <&camera 0>;
551 clock-names = "cis_extclk";
553 s5c73m3_ep: endpoint {
554 remote-endpoint = <&csis0_ep>;
555 data-lanes = <1 2 3 4>;
562 samsung,i2c-sda-delay = <100>;
563 samsung,i2c-slave-addr = <0x10>;
564 samsung,i2c-max-bus-freq = <400000>;
565 pinctrl-0 = <&i2c3_bus>;
566 pinctrl-names = "default";
569 mms114-touchscreen@48 {
570 compatible = "melfas,mms114";
572 interrupt-parent = <&gpm2>;
576 avdd-supply = <&ldo23_reg>;
577 vdd-supply = <&ldo24_reg>;
582 samsung,i2c-sda-delay = <100>;
583 samsung,i2c-slave-addr = <0x10>;
584 samsung,i2c-max-bus-freq = <100000>;
585 pinctrl-0 = <&i2c4_bus>;
586 pinctrl-names = "default";
590 compatible = "wlf,wm1811";
592 clocks = <&pmu_system_controller 0>;
593 clock-names = "MCLK1";
594 DCVDD-supply = <&ldo3_reg>;
595 DBVDD1-supply = <&ldo3_reg>;
596 wlf,ldo1ena = <&gpj0 4 0>;
601 samsung,i2c-sda-delay = <100>;
602 samsung,i2c-slave-addr = <0x10>;
603 samsung,i2c-max-bus-freq = <100000>;
604 pinctrl-0 = <&i2c7_bus>;
605 pinctrl-names = "default";
608 max77686: max77686_pmic@09 {
609 compatible = "maxim,max77686";
610 interrupt-parent = <&gpx0>;
617 regulator-name = "VALIVE_1.0V_AP";
618 regulator-min-microvolt = <1000000>;
619 regulator-max-microvolt = <1000000>;
624 regulator-name = "VM1M2_1.2V_AP";
625 regulator-min-microvolt = <1200000>;
626 regulator-max-microvolt = <1200000>;
628 regulator-state-mem {
629 regulator-on-in-suspend;
634 regulator-name = "VCC_1.8V_AP";
635 regulator-min-microvolt = <1800000>;
636 regulator-max-microvolt = <1800000>;
641 regulator-name = "VCC_2.8V_AP";
642 regulator-min-microvolt = <2800000>;
643 regulator-max-microvolt = <2800000>;
648 regulator-name = "VCC_1.8V_IO";
649 regulator-min-microvolt = <1800000>;
650 regulator-max-microvolt = <1800000>;
655 regulator-name = "VMPLL_1.0V_AP";
656 regulator-min-microvolt = <1000000>;
657 regulator-max-microvolt = <1000000>;
659 regulator-state-mem {
660 regulator-on-in-suspend;
665 regulator-name = "VPLL_1.0V_AP";
666 regulator-min-microvolt = <1000000>;
667 regulator-max-microvolt = <1000000>;
669 regulator-state-mem {
670 regulator-on-in-suspend;
675 regulator-name = "VMIPI_1.0V";
676 regulator-min-microvolt = <1000000>;
677 regulator-max-microvolt = <1000000>;
678 regulator-state-mem {
679 regulator-off-in-suspend;
684 regulator-name = "CAM_ISP_MIPI_1.2V";
685 regulator-min-microvolt = <1200000>;
686 regulator-max-microvolt = <1200000>;
690 regulator-name = "VMIPI_1.8V";
691 regulator-min-microvolt = <1800000>;
692 regulator-max-microvolt = <1800000>;
693 regulator-state-mem {
694 regulator-off-in-suspend;
699 regulator-name = "VABB1_1.95V";
700 regulator-min-microvolt = <1950000>;
701 regulator-max-microvolt = <1950000>;
703 regulator-state-mem {
704 regulator-off-in-suspend;
709 regulator-name = "VUOTG_3.0V";
710 regulator-min-microvolt = <3000000>;
711 regulator-max-microvolt = <3000000>;
712 regulator-state-mem {
713 regulator-off-in-suspend;
718 regulator-name = "NFC_AVDD_1.8V";
719 regulator-min-microvolt = <1800000>;
720 regulator-max-microvolt = <1800000>;
724 regulator-name = "VABB2_1.95V";
725 regulator-min-microvolt = <1950000>;
726 regulator-max-microvolt = <1950000>;
728 regulator-state-mem {
729 regulator-off-in-suspend;
734 regulator-name = "VHSIC_1.0V";
735 regulator-min-microvolt = <1000000>;
736 regulator-max-microvolt = <1000000>;
737 regulator-state-mem {
738 regulator-on-in-suspend;
743 regulator-name = "VHSIC_1.8V";
744 regulator-min-microvolt = <1800000>;
745 regulator-max-microvolt = <1800000>;
746 regulator-state-mem {
747 regulator-on-in-suspend;
752 regulator-name = "CAM_SENSOR_CORE_1.2V";
753 regulator-min-microvolt = <1200000>;
754 regulator-max-microvolt = <1200000>;
758 regulator-name = "CAM_ISP_SEN_IO_1.8V";
759 regulator-min-microvolt = <1800000>;
760 regulator-max-microvolt = <1800000>;
764 regulator-name = "VT_CAM_1.8V";
765 regulator-min-microvolt = <1800000>;
766 regulator-max-microvolt = <1800000>;
770 regulator-name = "VDDQ_PRE_1.8V";
771 regulator-min-microvolt = <1800000>;
772 regulator-max-microvolt = <1800000>;
776 regulator-name = "VTF_2.8V";
777 regulator-min-microvolt = <2800000>;
778 regulator-max-microvolt = <2800000>;
779 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
783 regulator-name = "VMEM_VDD_2.8V";
784 regulator-min-microvolt = <2800000>;
785 regulator-max-microvolt = <2800000>;
786 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
790 regulator-name = "TSP_AVDD_3.3V";
791 regulator-min-microvolt = <3300000>;
792 regulator-max-microvolt = <3300000>;
796 regulator-name = "TSP_VDD_1.8V";
797 regulator-min-microvolt = <1800000>;
798 regulator-max-microvolt = <1800000>;
802 regulator-name = "LCD_VCC_3.3V";
803 regulator-min-microvolt = <2800000>;
804 regulator-max-microvolt = <2800000>;
808 regulator-name = "MOTOR_VCC_3.0V";
809 regulator-min-microvolt = <3000000>;
810 regulator-max-microvolt = <3000000>;
814 regulator-name = "vdd_mif";
815 regulator-min-microvolt = <850000>;
816 regulator-max-microvolt = <1100000>;
819 regulator-state-mem {
820 regulator-off-in-suspend;
825 regulator-name = "vdd_arm";
826 regulator-min-microvolt = <850000>;
827 regulator-max-microvolt = <1500000>;
830 regulator-state-mem {
831 regulator-on-in-suspend;
836 regulator-name = "vdd_int";
837 regulator-min-microvolt = <850000>;
838 regulator-max-microvolt = <1150000>;
841 regulator-state-mem {
842 regulator-off-in-suspend;
847 regulator-name = "vdd_g3d";
848 regulator-min-microvolt = <850000>;
849 regulator-max-microvolt = <1150000>;
851 regulator-state-mem {
852 regulator-off-in-suspend;
857 regulator-name = "VMEM_1.2V_AP";
858 regulator-min-microvolt = <1200000>;
859 regulator-max-microvolt = <1200000>;
864 regulator-name = "VCC_SUB_1.35V";
865 regulator-min-microvolt = <1350000>;
866 regulator-max-microvolt = <1350000>;
871 regulator-name = "VCC_SUB_2.0V";
872 regulator-min-microvolt = <2000000>;
873 regulator-max-microvolt = <2000000>;
878 regulator-name = "VMEM_VDDF_3.0V";
879 regulator-min-microvolt = <2850000>;
880 regulator-max-microvolt = <2850000>;
881 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
885 regulator-name = "CAM_ISP_CORE_1.2V";
886 regulator-min-microvolt = <1000000>;
887 regulator-max-microvolt = <1200000>;
888 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
895 pinctrl-0 = <&i2s0_bus>;
896 pinctrl-names = "default";
904 card-detect-delay = <200>;
905 vmmc-supply = <&ldo22_reg>;
906 clock-frequency = <400000000>;
907 samsung,dw-mshc-ciu-div = <0>;
908 samsung,dw-mshc-sdr-timing = <2 3>;
909 samsung,dw-mshc-ddr-timing = <1 2>;
910 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
911 pinctrl-names = "default";
917 &pmu_system_controller {
918 assigned-clocks = <&pmu_system_controller 0>;
919 assigned-clock-parents = <&clock CLK_XUSBXTI>;
923 pinctrl-names = "default";
924 pinctrl-0 = <&sleep0>;
926 sleep0: sleep-states {
927 PIN_SLP(gpa0-0, INPUT, NONE);
928 PIN_SLP(gpa0-1, OUT0, NONE);
929 PIN_SLP(gpa0-2, INPUT, NONE);
930 PIN_SLP(gpa0-3, INPUT, UP);
931 PIN_SLP(gpa0-4, INPUT, NONE);
932 PIN_SLP(gpa0-5, INPUT, DOWN);
933 PIN_SLP(gpa0-6, INPUT, DOWN);
934 PIN_SLP(gpa0-7, INPUT, UP);
936 PIN_SLP(gpa1-0, INPUT, DOWN);
937 PIN_SLP(gpa1-1, INPUT, DOWN);
938 PIN_SLP(gpa1-2, INPUT, DOWN);
939 PIN_SLP(gpa1-3, INPUT, DOWN);
940 PIN_SLP(gpa1-4, INPUT, DOWN);
941 PIN_SLP(gpa1-5, INPUT, DOWN);
943 PIN_SLP(gpb-0, INPUT, NONE);
944 PIN_SLP(gpb-1, INPUT, NONE);
945 PIN_SLP(gpb-2, INPUT, NONE);
946 PIN_SLP(gpb-3, INPUT, NONE);
947 PIN_SLP(gpb-4, INPUT, DOWN);
948 PIN_SLP(gpb-5, INPUT, UP);
949 PIN_SLP(gpb-6, INPUT, DOWN);
950 PIN_SLP(gpb-7, INPUT, DOWN);
952 PIN_SLP(gpc0-0, INPUT, DOWN);
953 PIN_SLP(gpc0-1, INPUT, DOWN);
954 PIN_SLP(gpc0-2, INPUT, DOWN);
955 PIN_SLP(gpc0-3, INPUT, DOWN);
956 PIN_SLP(gpc0-4, INPUT, DOWN);
958 PIN_SLP(gpc1-0, INPUT, NONE);
959 PIN_SLP(gpc1-1, PREV, NONE);
960 PIN_SLP(gpc1-2, INPUT, NONE);
961 PIN_SLP(gpc1-3, INPUT, NONE);
962 PIN_SLP(gpc1-4, INPUT, NONE);
964 PIN_SLP(gpd0-0, INPUT, DOWN);
965 PIN_SLP(gpd0-1, INPUT, DOWN);
966 PIN_SLP(gpd0-2, INPUT, NONE);
967 PIN_SLP(gpd0-3, INPUT, NONE);
969 PIN_SLP(gpd1-0, INPUT, DOWN);
970 PIN_SLP(gpd1-1, INPUT, DOWN);
971 PIN_SLP(gpd1-2, INPUT, NONE);
972 PIN_SLP(gpd1-3, INPUT, NONE);
974 PIN_SLP(gpf0-0, INPUT, NONE);
975 PIN_SLP(gpf0-1, INPUT, NONE);
976 PIN_SLP(gpf0-2, INPUT, DOWN);
977 PIN_SLP(gpf0-3, INPUT, DOWN);
978 PIN_SLP(gpf0-4, INPUT, NONE);
979 PIN_SLP(gpf0-5, INPUT, DOWN);
980 PIN_SLP(gpf0-6, INPUT, NONE);
981 PIN_SLP(gpf0-7, INPUT, DOWN);
983 PIN_SLP(gpf1-0, INPUT, DOWN);
984 PIN_SLP(gpf1-1, INPUT, DOWN);
985 PIN_SLP(gpf1-2, INPUT, DOWN);
986 PIN_SLP(gpf1-3, INPUT, DOWN);
987 PIN_SLP(gpf1-4, INPUT, NONE);
988 PIN_SLP(gpf1-5, INPUT, NONE);
989 PIN_SLP(gpf1-6, INPUT, DOWN);
990 PIN_SLP(gpf1-7, PREV, NONE);
992 PIN_SLP(gpf2-0, PREV, NONE);
993 PIN_SLP(gpf2-1, INPUT, DOWN);
994 PIN_SLP(gpf2-2, INPUT, DOWN);
995 PIN_SLP(gpf2-3, INPUT, DOWN);
996 PIN_SLP(gpf2-4, INPUT, DOWN);
997 PIN_SLP(gpf2-5, INPUT, DOWN);
998 PIN_SLP(gpf2-6, INPUT, NONE);
999 PIN_SLP(gpf2-7, INPUT, NONE);
1001 PIN_SLP(gpf3-0, INPUT, NONE);
1002 PIN_SLP(gpf3-1, PREV, NONE);
1003 PIN_SLP(gpf3-2, PREV, NONE);
1004 PIN_SLP(gpf3-3, PREV, NONE);
1005 PIN_SLP(gpf3-4, OUT1, NONE);
1006 PIN_SLP(gpf3-5, INPUT, DOWN);
1008 PIN_SLP(gpj0-0, PREV, NONE);
1009 PIN_SLP(gpj0-1, PREV, NONE);
1010 PIN_SLP(gpj0-2, PREV, NONE);
1011 PIN_SLP(gpj0-3, INPUT, DOWN);
1012 PIN_SLP(gpj0-4, PREV, NONE);
1013 PIN_SLP(gpj0-5, PREV, NONE);
1014 PIN_SLP(gpj0-6, INPUT, DOWN);
1015 PIN_SLP(gpj0-7, INPUT, DOWN);
1017 PIN_SLP(gpj1-0, INPUT, DOWN);
1018 PIN_SLP(gpj1-1, PREV, NONE);
1019 PIN_SLP(gpj1-2, PREV, NONE);
1020 PIN_SLP(gpj1-3, INPUT, DOWN);
1021 PIN_SLP(gpj1-4, INPUT, DOWN);
1026 pinctrl-names = "default";
1027 pinctrl-0 = <&sleep1>;
1029 sleep1: sleep-states {
1030 PIN_SLP(gpk0-0, PREV, NONE);
1031 PIN_SLP(gpk0-1, PREV, NONE);
1032 PIN_SLP(gpk0-2, OUT0, NONE);
1033 PIN_SLP(gpk0-3, PREV, NONE);
1034 PIN_SLP(gpk0-4, PREV, NONE);
1035 PIN_SLP(gpk0-5, PREV, NONE);
1036 PIN_SLP(gpk0-6, PREV, NONE);
1038 PIN_SLP(gpk1-0, INPUT, DOWN);
1039 PIN_SLP(gpk1-1, INPUT, DOWN);
1040 PIN_SLP(gpk1-2, INPUT, DOWN);
1041 PIN_SLP(gpk1-3, PREV, NONE);
1042 PIN_SLP(gpk1-4, PREV, NONE);
1043 PIN_SLP(gpk1-5, PREV, NONE);
1044 PIN_SLP(gpk1-6, PREV, NONE);
1046 PIN_SLP(gpk2-0, INPUT, DOWN);
1047 PIN_SLP(gpk2-1, INPUT, DOWN);
1048 PIN_SLP(gpk2-2, INPUT, DOWN);
1049 PIN_SLP(gpk2-3, INPUT, DOWN);
1050 PIN_SLP(gpk2-4, INPUT, DOWN);
1051 PIN_SLP(gpk2-5, INPUT, DOWN);
1052 PIN_SLP(gpk2-6, INPUT, DOWN);
1054 PIN_SLP(gpk3-0, OUT0, NONE);
1055 PIN_SLP(gpk3-1, INPUT, NONE);
1056 PIN_SLP(gpk3-2, INPUT, DOWN);
1057 PIN_SLP(gpk3-3, INPUT, NONE);
1058 PIN_SLP(gpk3-4, INPUT, NONE);
1059 PIN_SLP(gpk3-5, INPUT, NONE);
1060 PIN_SLP(gpk3-6, INPUT, NONE);
1062 PIN_SLP(gpl0-0, INPUT, DOWN);
1063 PIN_SLP(gpl0-1, INPUT, DOWN);
1064 PIN_SLP(gpl0-2, INPUT, DOWN);
1065 PIN_SLP(gpl0-3, INPUT, DOWN);
1066 PIN_SLP(gpl0-4, PREV, NONE);
1067 PIN_SLP(gpl0-6, PREV, NONE);
1069 PIN_SLP(gpl1-0, INPUT, DOWN);
1070 PIN_SLP(gpl1-1, INPUT, DOWN);
1071 PIN_SLP(gpl2-0, INPUT, DOWN);
1072 PIN_SLP(gpl2-1, INPUT, DOWN);
1073 PIN_SLP(gpl2-2, INPUT, DOWN);
1074 PIN_SLP(gpl2-3, INPUT, DOWN);
1075 PIN_SLP(gpl2-4, INPUT, DOWN);
1076 PIN_SLP(gpl2-5, INPUT, DOWN);
1077 PIN_SLP(gpl2-6, PREV, NONE);
1078 PIN_SLP(gpl2-7, INPUT, DOWN);
1080 PIN_SLP(gpm0-0, INPUT, DOWN);
1081 PIN_SLP(gpm0-1, INPUT, DOWN);
1082 PIN_SLP(gpm0-2, INPUT, DOWN);
1083 PIN_SLP(gpm0-3, INPUT, DOWN);
1084 PIN_SLP(gpm0-4, INPUT, DOWN);
1085 PIN_SLP(gpm0-5, INPUT, DOWN);
1086 PIN_SLP(gpm0-6, INPUT, DOWN);
1087 PIN_SLP(gpm0-7, INPUT, DOWN);
1089 PIN_SLP(gpm1-0, INPUT, DOWN);
1090 PIN_SLP(gpm1-1, INPUT, DOWN);
1091 PIN_SLP(gpm1-2, INPUT, NONE);
1092 PIN_SLP(gpm1-3, INPUT, NONE);
1093 PIN_SLP(gpm1-4, INPUT, NONE);
1094 PIN_SLP(gpm1-5, INPUT, NONE);
1095 PIN_SLP(gpm1-6, INPUT, DOWN);
1097 PIN_SLP(gpm2-0, INPUT, NONE);
1098 PIN_SLP(gpm2-1, INPUT, NONE);
1099 PIN_SLP(gpm2-2, INPUT, DOWN);
1100 PIN_SLP(gpm2-3, INPUT, DOWN);
1101 PIN_SLP(gpm2-4, INPUT, DOWN);
1103 PIN_SLP(gpm3-0, PREV, NONE);
1104 PIN_SLP(gpm3-1, PREV, NONE);
1105 PIN_SLP(gpm3-2, PREV, NONE);
1106 PIN_SLP(gpm3-3, OUT1, NONE);
1107 PIN_SLP(gpm3-4, INPUT, DOWN);
1108 PIN_SLP(gpm3-5, INPUT, DOWN);
1109 PIN_SLP(gpm3-6, INPUT, DOWN);
1110 PIN_SLP(gpm3-7, INPUT, DOWN);
1112 PIN_SLP(gpm4-0, INPUT, DOWN);
1113 PIN_SLP(gpm4-1, INPUT, DOWN);
1114 PIN_SLP(gpm4-2, INPUT, DOWN);
1115 PIN_SLP(gpm4-3, INPUT, DOWN);
1116 PIN_SLP(gpm4-4, INPUT, DOWN);
1117 PIN_SLP(gpm4-5, INPUT, DOWN);
1118 PIN_SLP(gpm4-6, INPUT, DOWN);
1119 PIN_SLP(gpm4-7, INPUT, DOWN);
1121 PIN_SLP(gpy0-0, INPUT, DOWN);
1122 PIN_SLP(gpy0-1, INPUT, DOWN);
1123 PIN_SLP(gpy0-2, INPUT, DOWN);
1124 PIN_SLP(gpy0-3, INPUT, DOWN);
1125 PIN_SLP(gpy0-4, INPUT, DOWN);
1126 PIN_SLP(gpy0-5, INPUT, DOWN);
1128 PIN_SLP(gpy1-0, INPUT, DOWN);
1129 PIN_SLP(gpy1-1, INPUT, DOWN);
1130 PIN_SLP(gpy1-2, INPUT, DOWN);
1131 PIN_SLP(gpy1-3, INPUT, DOWN);
1133 PIN_SLP(gpy2-0, PREV, NONE);
1134 PIN_SLP(gpy2-1, INPUT, DOWN);
1135 PIN_SLP(gpy2-2, INPUT, NONE);
1136 PIN_SLP(gpy2-3, INPUT, NONE);
1137 PIN_SLP(gpy2-4, INPUT, NONE);
1138 PIN_SLP(gpy2-5, INPUT, NONE);
1140 PIN_SLP(gpy3-0, INPUT, DOWN);
1141 PIN_SLP(gpy3-1, INPUT, DOWN);
1142 PIN_SLP(gpy3-2, INPUT, DOWN);
1143 PIN_SLP(gpy3-3, INPUT, DOWN);
1144 PIN_SLP(gpy3-4, INPUT, DOWN);
1145 PIN_SLP(gpy3-5, INPUT, DOWN);
1146 PIN_SLP(gpy3-6, INPUT, DOWN);
1147 PIN_SLP(gpy3-7, INPUT, DOWN);
1149 PIN_SLP(gpy4-0, INPUT, DOWN);
1150 PIN_SLP(gpy4-1, INPUT, DOWN);
1151 PIN_SLP(gpy4-2, INPUT, DOWN);
1152 PIN_SLP(gpy4-3, INPUT, DOWN);
1153 PIN_SLP(gpy4-4, INPUT, DOWN);
1154 PIN_SLP(gpy4-5, INPUT, DOWN);
1155 PIN_SLP(gpy4-6, INPUT, DOWN);
1156 PIN_SLP(gpy4-7, INPUT, DOWN);
1158 PIN_SLP(gpy5-0, INPUT, DOWN);
1159 PIN_SLP(gpy5-1, INPUT, DOWN);
1160 PIN_SLP(gpy5-2, INPUT, DOWN);
1161 PIN_SLP(gpy5-3, INPUT, DOWN);
1162 PIN_SLP(gpy5-4, INPUT, DOWN);
1163 PIN_SLP(gpy5-5, INPUT, DOWN);
1164 PIN_SLP(gpy5-6, INPUT, DOWN);
1165 PIN_SLP(gpy5-7, INPUT, DOWN);
1167 PIN_SLP(gpy6-0, INPUT, DOWN);
1168 PIN_SLP(gpy6-1, INPUT, DOWN);
1169 PIN_SLP(gpy6-2, INPUT, DOWN);
1170 PIN_SLP(gpy6-3, INPUT, DOWN);
1171 PIN_SLP(gpy6-4, INPUT, DOWN);
1172 PIN_SLP(gpy6-5, INPUT, DOWN);
1173 PIN_SLP(gpy6-6, INPUT, DOWN);
1174 PIN_SLP(gpy6-7, INPUT, DOWN);
1179 pinctrl-names = "default";
1180 pinctrl-0 = <&sleep2>;
1182 sleep2: sleep-states {
1183 PIN_SLP(gpz-0, INPUT, DOWN);
1184 PIN_SLP(gpz-1, INPUT, DOWN);
1185 PIN_SLP(gpz-2, INPUT, DOWN);
1186 PIN_SLP(gpz-3, INPUT, DOWN);
1187 PIN_SLP(gpz-4, INPUT, DOWN);
1188 PIN_SLP(gpz-5, INPUT, DOWN);
1189 PIN_SLP(gpz-6, INPUT, DOWN);
1194 pinctrl-names = "default";
1195 pinctrl-0 = <&sleep3>;
1197 sleep3: sleep-states {
1198 PIN_SLP(gpv0-0, INPUT, DOWN);
1199 PIN_SLP(gpv0-1, INPUT, DOWN);
1200 PIN_SLP(gpv0-2, INPUT, DOWN);
1201 PIN_SLP(gpv0-3, INPUT, DOWN);
1202 PIN_SLP(gpv0-4, INPUT, DOWN);
1203 PIN_SLP(gpv0-5, INPUT, DOWN);
1204 PIN_SLP(gpv0-6, INPUT, DOWN);
1205 PIN_SLP(gpv0-7, INPUT, DOWN);
1207 PIN_SLP(gpv1-0, INPUT, DOWN);
1208 PIN_SLP(gpv1-1, INPUT, DOWN);
1209 PIN_SLP(gpv1-2, INPUT, DOWN);
1210 PIN_SLP(gpv1-3, INPUT, DOWN);
1211 PIN_SLP(gpv1-4, INPUT, DOWN);
1212 PIN_SLP(gpv1-5, INPUT, DOWN);
1213 PIN_SLP(gpv1-6, INPUT, DOWN);
1214 PIN_SLP(gpv1-7, INPUT, DOWN);
1216 PIN_SLP(gpv2-0, INPUT, DOWN);
1217 PIN_SLP(gpv2-1, INPUT, DOWN);
1218 PIN_SLP(gpv2-2, INPUT, DOWN);
1219 PIN_SLP(gpv2-3, INPUT, DOWN);
1220 PIN_SLP(gpv2-4, INPUT, DOWN);
1221 PIN_SLP(gpv2-5, INPUT, DOWN);
1222 PIN_SLP(gpv2-6, INPUT, DOWN);
1223 PIN_SLP(gpv2-7, INPUT, DOWN);
1225 PIN_SLP(gpv3-0, INPUT, DOWN);
1226 PIN_SLP(gpv3-1, INPUT, DOWN);
1227 PIN_SLP(gpv3-2, INPUT, DOWN);
1228 PIN_SLP(gpv3-3, INPUT, DOWN);
1229 PIN_SLP(gpv3-4, INPUT, DOWN);
1230 PIN_SLP(gpv3-5, INPUT, DOWN);
1231 PIN_SLP(gpv3-6, INPUT, DOWN);
1232 PIN_SLP(gpv3-7, INPUT, DOWN);
1234 PIN_SLP(gpv4-0, INPUT, DOWN);
1239 pinctrl-0 = <&pwm0_out>;
1240 pinctrl-names = "default";
1241 samsung,pwm-outputs = <0>;
1247 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1248 clock-names = "rtc", "rtc_src";
1253 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1255 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1256 pinctrl-names = "default";
1257 vmmc-supply = <&ldo21_reg>;
1278 pinctrl-names = "default";
1279 pinctrl-0 = <&spi1_bus>;
1280 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1283 s5c73m3_spi: s5c73m3@0 {
1284 compatible = "samsung,s5c73m3";
1285 spi-max-frequency = <50000000>;
1288 samsung,spi-feedback-delay = <2>;
1294 vtmu-supply = <&ldo10_reg>;