2 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 /include/ "imx28.dtsi"
16 model = "DENX M28EVK";
17 compatible = "denx,m28evk", "fsl,imx28";
20 reg = <0x40000000 0x08000000>;
28 pinctrl-names = "default";
29 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
34 reg = <0x00000000 0x00300000>;
39 label = "environment";
40 reg = <0x00300000 0x00080000>;
44 label = "redundant-environment";
45 reg = <0x00380000 0x00080000>;
50 reg = <0x00400000 0x00400000>;
55 reg = <0x00800000 0x0f800000>;
60 compatible = "fsl,imx28-mmc";
61 pinctrl-names = "default";
62 pinctrl-0 = <&mmc0_8bit_pins_a
66 wp-gpios = <&gpio3 10 0>;
67 vmmc-supply = <®_vddio_sd0>;
74 compatible = "fsl,imx28-spi";
75 pinctrl-names = "default";
76 pinctrl-0 = <&spi2_pins_a>;
82 compatible = "m25p80";
83 spi-max-frequency = <40000000>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&hog_pins_a>;
95 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
96 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
97 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
98 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
99 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
101 fsl,drive-strength = <0>;
106 lcdif_pins_m28: lcdif-m28@0 {
109 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
110 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
112 fsl,drive-strength = <0>;
119 pinctrl-names = "default";
120 pinctrl-0 = <&lcdif_24bit_pins_a
122 display = <&display>;
126 bits-per-pixel = <16>;
130 native-mode = <&timing0>;
132 clock-frequency = <33260000>;
136 hfront-porch = <256>;
144 pixelclk-active = <1>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&can0_pins_a>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&can1_pins_a>;
164 saif0: saif@80042000 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&saif0_pins_a>;
170 saif1: saif@80046000 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&saif1_pins_a>;
173 fsl,saif-master = <&saif0>;
178 pinctrl-names = "default";
179 pinctrl-0 = <&i2c0_pins_a>;
180 clock-frequency = <400000>;
184 compatible = "fsl,sgtl5000";
186 VDDA-supply = <®_3p3v>;
187 VDDIO-supply = <®_3p3v>;
192 compatible = "atmel,24c128";
198 compatible = "stm,mt41t62";
205 fsl,lradc-touchscreen-wires = <4>;
208 duart: serial@80074000 {
209 pinctrl-names = "default";
210 pinctrl-0 = <&duart_pins_a>;
214 usbphy0: usbphy@8007c000 {
218 usbphy1: usbphy@8007e000 {
222 auart0: serial@8006a000 {
223 pinctrl-names = "default";
224 pinctrl-0 = <&auart0_2pins_a>;
232 vbus-supply = <®_usb0_vbus>;
233 pinctrl-names = "default";
234 pinctrl-0 = <&usbphy0_pins_a>;
239 vbus-supply = <®_usb1_vbus>;
240 pinctrl-names = "default";
241 pinctrl-0 = <&usbphy1_pins_a>;
245 mac0: ethernet@800f0000 {
247 pinctrl-names = "default";
248 pinctrl-0 = <&mac0_pins_a>;
249 clocks = <&clks 57>, <&clks 57>;
250 clock-names = "ipg", "ahb";
254 mac1: ethernet@800f4000 {
256 pinctrl-names = "default";
257 pinctrl-0 = <&mac1_pins_a>;
263 compatible = "simple-bus";
266 compatible = "regulator-fixed";
267 regulator-name = "3P3V";
268 regulator-min-microvolt = <3300000>;
269 regulator-max-microvolt = <3300000>;
273 reg_vddio_sd0: vddio-sd0 {
274 compatible = "regulator-fixed";
275 regulator-name = "vddio-sd0";
276 regulator-min-microvolt = <3300000>;
277 regulator-max-microvolt = <3300000>;
278 gpio = <&gpio3 28 0>;
281 reg_usb0_vbus: usb0_vbus {
282 compatible = "regulator-fixed";
283 regulator-name = "usb0_vbus";
284 regulator-min-microvolt = <5000000>;
285 regulator-max-microvolt = <5000000>;
286 gpio = <&gpio3 12 0>;
289 reg_usb1_vbus: usb1_vbus {
290 compatible = "regulator-fixed";
291 regulator-name = "usb1_vbus";
292 regulator-min-microvolt = <5000000>;
293 regulator-max-microvolt = <5000000>;
294 gpio = <&gpio3 13 0>;
299 compatible = "denx,m28evk-sgtl5000",
300 "fsl,mxs-audio-sgtl5000";
301 model = "m28evk-sgtl5000";
302 saif-controllers = <&saif0 &saif1>;
303 audio-codec = <&sgtl5000>;