arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "imx28-pinfunc.h"
  14
  15 / {
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         interrupt-parent = <&icoll>;
  20         /*
  21          * The decompressor and also some bootloaders rely on a
  22          * pre-existing /chosen node to be available to insert the
  23          * command line and merge other ATAGS info.
  24          * Also for U-Boot there must be a pre-existing /memory node.
  25          */
  26         chosen {};
  27         memory { device_type = "memory"; reg = <0 0>; };
  28
  29         aliases {
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32                 gpio0 = &gpio0;
  33                 gpio1 = &gpio1;
  34                 gpio2 = &gpio2;
  35                 gpio3 = &gpio3;
  36                 gpio4 = &gpio4;
  37                 saif0 = &saif0;
  38                 saif1 = &saif1;
  39                 serial0 = &auart0;
  40                 serial1 = &auart1;
  41                 serial2 = &auart2;
  42                 serial3 = &auart3;
  43                 serial4 = &auart4;
  44                 spi0 = &ssp1;
  45                 spi1 = &ssp2;
  46                 usbphy0 = &usbphy0;
  47                 usbphy1 = &usbphy1;
  48         };
  49
  50         cpus {
  51                 #address-cells = <0>;
  52                 #size-cells = <0>;
  53
  54                 cpu {
  55                         compatible = "arm,arm926ej-s";
  56                         device_type = "cpu";
  57                 };
  58         };
  59
  60         apb@80000000 {
  61                 compatible = "simple-bus";
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 reg = <0x80000000 0x80000>;
  65                 ranges;
  66
  67                 apbh@80000000 {
  68                         compatible = "simple-bus";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71                         reg = <0x80000000 0x3c900>;
  72                         ranges;
  73
  74                         icoll: interrupt-controller@80000000 {
  75                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  76                                 interrupt-controller;
  77                                 #interrupt-cells = <1>;
  78                                 reg = <0x80000000 0x2000>;
  79                         };
  80
  81                         hsadc: hsadc@80002000 {
  82                                 reg = <0x80002000 0x2000>;
  83                                 interrupts = <13>;
  84                                 dmas = <&dma_apbh 12>;
  85                                 dma-names = "rx";
  86                                 status = "disabled";
  87                         };
  88
  89                         dma_apbh: dma-apbh@80004000 {
  90                                 compatible = "fsl,imx28-dma-apbh";
  91                                 reg = <0x80004000 0x2000>;
  92                                 interrupts = <82 83 84 85
  93                                               88 88 88 88
  94                                               88 88 88 88
  95                                               87 86 0 0>;
  96                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  97                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  98                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  99                                                   "hsadc", "lcdif", "empty", "empty";
 100                                 #dma-cells = <1>;
 101                                 dma-channels = <16>;
 102                                 clocks = <&clks 25>;
 103                         };
 104
 105                         perfmon: perfmon@80006000 {
 106                                 reg = <0x80006000 0x800>;
 107                                 interrupts = <27>;
 108                                 status = "disabled";
 109                         };
 110
 111                         gpmi: gpmi-nand@8000c000 {
 112                                 compatible = "fsl,imx28-gpmi-nand";
 113                                 #address-cells = <1>;
 114                                 #size-cells = <1>;
 115                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 116                                 reg-names = "gpmi-nand", "bch";
 117                                 interrupts = <41>;
 118                                 interrupt-names = "bch";
 119                                 clocks = <&clks 50>;
 120                                 clock-names = "gpmi_io";
 121                                 dmas = <&dma_apbh 4>;
 122                                 dma-names = "rx-tx";
 123                                 status = "disabled";
 124                         };
 125
 126                         ssp0: ssp@80010000 {
 127                                 #address-cells = <1>;
 128                                 #size-cells = <0>;
 129                                 reg = <0x80010000 0x2000>;
 130                                 interrupts = <96>;
 131                                 clocks = <&clks 46>;
 132                                 dmas = <&dma_apbh 0>;
 133                                 dma-names = "rx-tx";
 134                                 status = "disabled";
 135                         };
 136
 137                         ssp1: ssp@80012000 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 reg = <0x80012000 0x2000>;
 141                                 interrupts = <97>;
 142                                 clocks = <&clks 47>;
 143                                 dmas = <&dma_apbh 1>;
 144                                 dma-names = "rx-tx";
 145                                 status = "disabled";
 146                         };
 147
 148                         ssp2: ssp@80014000 {
 149                                 #address-cells = <1>;
 150                                 #size-cells = <0>;
 151                                 reg = <0x80014000 0x2000>;
 152                                 interrupts = <98>;
 153                                 clocks = <&clks 48>;
 154                                 dmas = <&dma_apbh 2>;
 155                                 dma-names = "rx-tx";
 156                                 status = "disabled";
 157                         };
 158
 159                         ssp3: ssp@80016000 {
 160                                 #address-cells = <1>;
 161                                 #size-cells = <0>;
 162                                 reg = <0x80016000 0x2000>;
 163                                 interrupts = <99>;
 164                                 clocks = <&clks 49>;
 165                                 dmas = <&dma_apbh 3>;
 166                                 dma-names = "rx-tx";
 167                                 status = "disabled";
 168                         };
 169
 170                         pinctrl: pinctrl@80018000 {
 171                                 #address-cells = <1>;
 172                                 #size-cells = <0>;
 173                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 174                                 reg = <0x80018000 0x2000>;
 175
 176                                 gpio0: gpio@0 {
 177                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 178                                         reg = <0>;
 179                                         interrupts = <127>;
 180                                         gpio-controller;
 181                                         #gpio-cells = <2>;
 182                                         interrupt-controller;
 183                                         #interrupt-cells = <2>;
 184                                 };
 185
 186                                 gpio1: gpio@1 {
 187                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 188                                         reg = <1>;
 189                                         interrupts = <126>;
 190                                         gpio-controller;
 191                                         #gpio-cells = <2>;
 192                                         interrupt-controller;
 193                                         #interrupt-cells = <2>;
 194                                 };
 195
 196                                 gpio2: gpio@2 {
 197                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 198                                         reg = <2>;
 199                                         interrupts = <125>;
 200                                         gpio-controller;
 201                                         #gpio-cells = <2>;
 202                                         interrupt-controller;
 203                                         #interrupt-cells = <2>;
 204                                 };
 205
 206                                 gpio3: gpio@3 {
 207                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 208                                         reg = <3>;
 209                                         interrupts = <124>;
 210                                         gpio-controller;
 211                                         #gpio-cells = <2>;
 212                                         interrupt-controller;
 213                                         #interrupt-cells = <2>;
 214                                 };
 215
 216                                 gpio4: gpio@4 {
 217                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 218                                         reg = <4>;
 219                                         interrupts = <123>;
 220                                         gpio-controller;
 221                                         #gpio-cells = <2>;
 222                                         interrupt-controller;
 223                                         #interrupt-cells = <2>;
 224                                 };
 225
 226                                 duart_pins_a: duart@0 {
 227                                         reg = <0>;
 228                                         fsl,pinmux-ids = <
 229                                                 MX28_PAD_PWM0__DUART_RX
 230                                                 MX28_PAD_PWM1__DUART_TX
 231                                         >;
 232                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 233                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 234                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 235                                 };
 236
 237                                 duart_pins_b: duart@1 {
 238                                         reg = <1>;
 239                                         fsl,pinmux-ids = <
 240                                                 MX28_PAD_AUART0_CTS__DUART_RX
 241                                                 MX28_PAD_AUART0_RTS__DUART_TX
 242                                         >;
 243                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 244                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 245                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 246                                 };
 247
 248                                 duart_4pins_a: duart-4pins@0 {
 249                                         reg = <0>;
 250                                         fsl,pinmux-ids = <
 251                                                 MX28_PAD_AUART0_CTS__DUART_RX
 252                                                 MX28_PAD_AUART0_RTS__DUART_TX
 253                                                 MX28_PAD_AUART0_RX__DUART_CTS
 254                                                 MX28_PAD_AUART0_TX__DUART_RTS
 255                                         >;
 256                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 257                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 258                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 259                                 };
 260
 261                                 gpmi_pins_a: gpmi-nand@0 {
 262                                         reg = <0>;
 263                                         fsl,pinmux-ids = <
 264                                                 MX28_PAD_GPMI_D00__GPMI_D0
 265                                                 MX28_PAD_GPMI_D01__GPMI_D1
 266                                                 MX28_PAD_GPMI_D02__GPMI_D2
 267                                                 MX28_PAD_GPMI_D03__GPMI_D3
 268                                                 MX28_PAD_GPMI_D04__GPMI_D4
 269                                                 MX28_PAD_GPMI_D05__GPMI_D5
 270                                                 MX28_PAD_GPMI_D06__GPMI_D6
 271                                                 MX28_PAD_GPMI_D07__GPMI_D7
 272                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 273                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 274                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 275                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 276                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 277                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 278                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 279                                         >;
 280                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 281                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 282                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 283                                 };
 284
 285                                 gpmi_status_cfg: gpmi-status-cfg {
 286                                         fsl,pinmux-ids = <
 287                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 288                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 289                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 290                                         >;
 291                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 292                                 };
 293
 294                                 auart0_pins_a: auart0@0 {
 295                                         reg = <0>;
 296                                         fsl,pinmux-ids = <
 297                                                 MX28_PAD_AUART0_RX__AUART0_RX
 298                                                 MX28_PAD_AUART0_TX__AUART0_TX
 299                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 300                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 301                                         >;
 302                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 303                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 304                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 305                                 };
 306
 307                                 auart0_2pins_a: auart0-2pins@0 {
 308                                         reg = <0>;
 309                                         fsl,pinmux-ids = <
 310                                                 MX28_PAD_AUART0_RX__AUART0_RX
 311                                                 MX28_PAD_AUART0_TX__AUART0_TX
 312                                         >;
 313                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 314                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 315                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 316                                 };
 317
 318                                 auart1_pins_a: auart1@0 {
 319                                         reg = <0>;
 320                                         fsl,pinmux-ids = <
 321                                                 MX28_PAD_AUART1_RX__AUART1_RX
 322                                                 MX28_PAD_AUART1_TX__AUART1_TX
 323                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 324                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 325                                         >;
 326                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 327                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 328                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 329                                 };
 330
 331                                 auart1_2pins_a: auart1-2pins@0 {
 332                                         reg = <0>;
 333                                         fsl,pinmux-ids = <
 334                                                 MX28_PAD_AUART1_RX__AUART1_RX
 335                                                 MX28_PAD_AUART1_TX__AUART1_TX
 336                                         >;
 337                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 338                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 339                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 340                                 };
 341
 342                                 auart2_2pins_a: auart2-2pins@0 {
 343                                         reg = <0>;
 344                                         fsl,pinmux-ids = <
 345                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 346                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 347                                         >;
 348                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 349                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 350                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 351                                 };
 352
 353                                 auart2_2pins_b: auart2-2pins@1 {
 354                                         reg = <1>;
 355                                         fsl,pinmux-ids = <
 356                                                 MX28_PAD_AUART2_RX__AUART2_RX
 357                                                 MX28_PAD_AUART2_TX__AUART2_TX
 358                                         >;
 359                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 360                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 361                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 362                                 };
 363
 364                                 auart2_pins_a: auart2-pins@0 {
 365                                         reg = <0>;
 366                                         fsl,pinmux-ids = <
 367                                                 MX28_PAD_AUART2_RX__AUART2_RX
 368                                                 MX28_PAD_AUART2_TX__AUART2_TX
 369                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 370                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 371                                         >;
 372                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 373                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 374                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 375                                 };
 376
 377                                 auart3_pins_a: auart3@0 {
 378                                         reg = <0>;
 379                                         fsl,pinmux-ids = <
 380                                                 MX28_PAD_AUART3_RX__AUART3_RX
 381                                                 MX28_PAD_AUART3_TX__AUART3_TX
 382                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 383                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 384                                         >;
 385                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 386                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 387                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 388                                 };
 389
 390                                 auart3_2pins_a: auart3-2pins@0 {
 391                                         reg = <0>;
 392                                         fsl,pinmux-ids = <
 393                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 394                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 395                                         >;
 396                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 397                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 398                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 399                                 };
 400
 401                                 auart3_2pins_b: auart3-2pins@1 {
 402                                         reg = <1>;
 403                                         fsl,pinmux-ids = <
 404                                                 MX28_PAD_AUART3_RX__AUART3_RX
 405                                                 MX28_PAD_AUART3_TX__AUART3_TX
 406                                         >;
 407                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 408                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 409                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 410                                 };
 411
 412                                 auart4_2pins_a: auart4@0 {
 413                                         reg = <0>;
 414                                         fsl,pinmux-ids = <
 415                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 416                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 417                                         >;
 418                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 419                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 420                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 421                                 };
 422
 423                                 auart4_2pins_b: auart4@1 {
 424                                         reg = <1>;
 425                                         fsl,pinmux-ids = <
 426                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 427                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 428                                         >;
 429                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 430                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 431                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 432                                 };
 433
 434                                 mac0_pins_a: mac0@0 {
 435                                         reg = <0>;
 436                                         fsl,pinmux-ids = <
 437                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 438                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 439                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 440                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 441                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 442                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 443                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 444                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 445                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 446                                         >;
 447                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 448                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 449                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 450                                 };
 451
 452                                 mac0_pins_b: mac0@1 {
 453                                         reg = <1>;
 454                                         fsl,pinmux-ids = <
 455                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 456                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 457                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 458                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 459                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 460                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
 461                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
 462                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 463                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 464                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 465                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
 466                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
 467                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 468                                                 MX28_PAD_ENET0_COL__ENET0_COL
 469                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
 470                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
 471                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
 472                                                 >;
 473                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 474                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 475                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 476                                 };
 477
 478                                 mac1_pins_a: mac1@0 {
 479                                         reg = <0>;
 480                                         fsl,pinmux-ids = <
 481                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 482                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 483                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 484                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 485                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 486                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 487                                         >;
 488                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 489                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 490                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 491                                 };
 492
 493                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 494                                         reg = <0>;
 495                                         fsl,pinmux-ids = <
 496                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 497                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 498                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 499                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 500                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 501                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 502                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 503                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 504                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 505                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 506                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 507                                         >;
 508                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 509                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 510                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 511                                 };
 512
 513                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 514                                         reg = <0>;
 515                                         fsl,pinmux-ids = <
 516                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 517                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 518                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 519                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 520                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 521                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 522                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 523                                         >;
 524                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 525                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 526                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 527                                 };
 528
 529                                 mmc0_cd_cfg: mmc0-cd-cfg {
 530                                         fsl,pinmux-ids = <
 531                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 532                                         >;
 533                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 534                                 };
 535
 536                                 mmc0_sck_cfg: mmc0-sck-cfg {
 537                                         fsl,pinmux-ids = <
 538                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 539                                         >;
 540                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 541                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 542                                 };
 543
 544                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 545                                         reg = <0>;
 546                                         fsl,pinmux-ids = <
 547                                                 MX28_PAD_GPMI_D00__SSP1_D0
 548                                                 MX28_PAD_GPMI_D01__SSP1_D1
 549                                                 MX28_PAD_GPMI_D02__SSP1_D2
 550                                                 MX28_PAD_GPMI_D03__SSP1_D3
 551                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 552                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 553                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 554                                         >;
 555                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 556                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 557                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 558                                 };
 559
 560                                 mmc1_cd_cfg: mmc1-cd-cfg {
 561                                         fsl,pinmux-ids = <
 562                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 563                                         >;
 564                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 565                                 };
 566
 567                                 mmc1_sck_cfg: mmc1-sck-cfg {
 568                                         fsl,pinmux-ids = <
 569                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 570                                         >;
 571                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 572                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 573                                 };
 574
 575
 576                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 577                                         reg = <0>;
 578                                         fsl,pinmux-ids = <
 579                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 580                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 581                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 582                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 583                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 584                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 585                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 586                                         >;
 587                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 588                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 589                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 590                                 };
 591
 592                                 mmc2_cd_cfg: mmc2-cd-cfg {
 593                                         fsl,pinmux-ids = <
 594                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 595                                         >;
 596                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 597                                 };
 598
 599                                 mmc2_sck_cfg: mmc2-sck-cfg {
 600                                         fsl,pinmux-ids = <
 601                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 602                                         >;
 603                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 604                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 605                                 };
 606
 607                                 i2c0_pins_a: i2c0@0 {
 608                                         reg = <0>;
 609                                         fsl,pinmux-ids = <
 610                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 611                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 612                                         >;
 613                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 614                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 615                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 616                                 };
 617
 618                                 i2c0_pins_b: i2c0@1 {
 619                                         reg = <1>;
 620                                         fsl,pinmux-ids = <
 621                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 622                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 623                                         >;
 624                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 625                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 626                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 627                                 };
 628
 629                                 i2c1_pins_a: i2c1@0 {
 630                                         reg = <0>;
 631                                         fsl,pinmux-ids = <
 632                                                 MX28_PAD_PWM0__I2C1_SCL
 633                                                 MX28_PAD_PWM1__I2C1_SDA
 634                                         >;
 635                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 636                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 637                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 638                                 };
 639
 640                                 i2c1_pins_b: i2c1@1 {
 641                                         reg = <1>;
 642                                         fsl,pinmux-ids = <
 643                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 644                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 645                                         >;
 646                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 647                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 648                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 649                                 };
 650
 651                                 saif0_pins_a: saif0@0 {
 652                                         reg = <0>;
 653                                         fsl,pinmux-ids = <
 654                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 655                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 656                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 657                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 658                                         >;
 659                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 660                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 661                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 662                                 };
 663
 664                                 saif0_pins_b: saif0@1 {
 665                                         reg = <1>;
 666                                         fsl,pinmux-ids = <
 667                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 668                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 669                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 670                                         >;
 671                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 672                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 673                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 674                                 };
 675
 676                                 saif1_pins_a: saif1@0 {
 677                                         reg = <0>;
 678                                         fsl,pinmux-ids = <
 679                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 680                                         >;
 681                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 682                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 683                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 684                                 };
 685
 686                                 pwm0_pins_a: pwm0@0 {
 687                                         reg = <0>;
 688                                         fsl,pinmux-ids = <
 689                                                 MX28_PAD_PWM0__PWM_0
 690                                         >;
 691                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 692                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 693                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 694                                 };
 695
 696                                 pwm2_pins_a: pwm2@0 {
 697                                         reg = <0>;
 698                                         fsl,pinmux-ids = <
 699                                                 MX28_PAD_PWM2__PWM_2
 700                                         >;
 701                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 702                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 703                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 704                                 };
 705
 706                                 pwm3_pins_a: pwm3@0 {
 707                                         reg = <0>;
 708                                         fsl,pinmux-ids = <
 709                                                 MX28_PAD_PWM3__PWM_3
 710                                         >;
 711                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 712                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 713                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 714                                 };
 715
 716                                 pwm3_pins_b: pwm3@1 {
 717                                         reg = <1>;
 718                                         fsl,pinmux-ids = <
 719                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 720                                         >;
 721                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 722                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 723                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 724                                 };
 725
 726                                 pwm4_pins_a: pwm4@0 {
 727                                         reg = <0>;
 728                                         fsl,pinmux-ids = <
 729                                                 MX28_PAD_PWM4__PWM_4
 730                                         >;
 731                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 732                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 733                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 734                                 };
 735
 736                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 737                                         reg = <0>;
 738                                         fsl,pinmux-ids = <
 739                                                 MX28_PAD_LCD_D00__LCD_D0
 740                                                 MX28_PAD_LCD_D01__LCD_D1
 741                                                 MX28_PAD_LCD_D02__LCD_D2
 742                                                 MX28_PAD_LCD_D03__LCD_D3
 743                                                 MX28_PAD_LCD_D04__LCD_D4
 744                                                 MX28_PAD_LCD_D05__LCD_D5
 745                                                 MX28_PAD_LCD_D06__LCD_D6
 746                                                 MX28_PAD_LCD_D07__LCD_D7
 747                                                 MX28_PAD_LCD_D08__LCD_D8
 748                                                 MX28_PAD_LCD_D09__LCD_D9
 749                                                 MX28_PAD_LCD_D10__LCD_D10
 750                                                 MX28_PAD_LCD_D11__LCD_D11
 751                                                 MX28_PAD_LCD_D12__LCD_D12
 752                                                 MX28_PAD_LCD_D13__LCD_D13
 753                                                 MX28_PAD_LCD_D14__LCD_D14
 754                                                 MX28_PAD_LCD_D15__LCD_D15
 755                                                 MX28_PAD_LCD_D16__LCD_D16
 756                                                 MX28_PAD_LCD_D17__LCD_D17
 757                                                 MX28_PAD_LCD_D18__LCD_D18
 758                                                 MX28_PAD_LCD_D19__LCD_D19
 759                                                 MX28_PAD_LCD_D20__LCD_D20
 760                                                 MX28_PAD_LCD_D21__LCD_D21
 761                                                 MX28_PAD_LCD_D22__LCD_D22
 762                                                 MX28_PAD_LCD_D23__LCD_D23
 763                                         >;
 764                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 765                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 766                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 767                                 };
 768
 769                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 770                                         reg = <0>;
 771                                         fsl,pinmux-ids = <
 772                                                 MX28_PAD_LCD_D00__LCD_D0
 773                                                 MX28_PAD_LCD_D01__LCD_D1
 774                                                 MX28_PAD_LCD_D02__LCD_D2
 775                                                 MX28_PAD_LCD_D03__LCD_D3
 776                                                 MX28_PAD_LCD_D04__LCD_D4
 777                                                 MX28_PAD_LCD_D05__LCD_D5
 778                                                 MX28_PAD_LCD_D06__LCD_D6
 779                                                 MX28_PAD_LCD_D07__LCD_D7
 780                                                 MX28_PAD_LCD_D08__LCD_D8
 781                                                 MX28_PAD_LCD_D09__LCD_D9
 782                                                 MX28_PAD_LCD_D10__LCD_D10
 783                                                 MX28_PAD_LCD_D11__LCD_D11
 784                                                 MX28_PAD_LCD_D12__LCD_D12
 785                                                 MX28_PAD_LCD_D13__LCD_D13
 786                                                 MX28_PAD_LCD_D14__LCD_D14
 787                                                 MX28_PAD_LCD_D15__LCD_D15
 788                                                 MX28_PAD_LCD_D16__LCD_D16
 789                                                 MX28_PAD_LCD_D17__LCD_D17
 790                                         >;
 791                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 792                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 793                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 794                                 };
 795
 796                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 797                                         reg = <0>;
 798                                         fsl,pinmux-ids = <
 799                                                 MX28_PAD_LCD_D00__LCD_D0
 800                                                 MX28_PAD_LCD_D01__LCD_D1
 801                                                 MX28_PAD_LCD_D02__LCD_D2
 802                                                 MX28_PAD_LCD_D03__LCD_D3
 803                                                 MX28_PAD_LCD_D04__LCD_D4
 804                                                 MX28_PAD_LCD_D05__LCD_D5
 805                                                 MX28_PAD_LCD_D06__LCD_D6
 806                                                 MX28_PAD_LCD_D07__LCD_D7
 807                                                 MX28_PAD_LCD_D08__LCD_D8
 808                                                 MX28_PAD_LCD_D09__LCD_D9
 809                                                 MX28_PAD_LCD_D10__LCD_D10
 810                                                 MX28_PAD_LCD_D11__LCD_D11
 811                                                 MX28_PAD_LCD_D12__LCD_D12
 812                                                 MX28_PAD_LCD_D13__LCD_D13
 813                                                 MX28_PAD_LCD_D14__LCD_D14
 814                                                 MX28_PAD_LCD_D15__LCD_D15
 815                                         >;
 816                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 817                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 818                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 819                                 };
 820
 821                                 lcdif_sync_pins_a: lcdif-sync@0 {
 822                                         reg = <0>;
 823                                         fsl,pinmux-ids = <
 824                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 825                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 826                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 827                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 828                                         >;
 829                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 830                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 831                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 832                                 };
 833
 834                                 can0_pins_a: can0@0 {
 835                                         reg = <0>;
 836                                         fsl,pinmux-ids = <
 837                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 838                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 839                                         >;
 840                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 841                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 842                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 843                                 };
 844
 845                                 can1_pins_a: can1@0 {
 846                                         reg = <0>;
 847                                         fsl,pinmux-ids = <
 848                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 849                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 850                                         >;
 851                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 852                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 853                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 854                                 };
 855
 856                                 spi2_pins_a: spi2@0 {
 857                                         reg = <0>;
 858                                         fsl,pinmux-ids = <
 859                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 860                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 861                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 862                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 863                                         >;
 864                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 865                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 866                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 867                                 };
 868
 869                                 spi3_pins_a: spi3@0 {
 870                                         reg = <0>;
 871                                         fsl,pinmux-ids = <
 872                                                 MX28_PAD_AUART2_RX__SSP3_D4
 873                                                 MX28_PAD_AUART2_TX__SSP3_D5
 874                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 875                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 876                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 877                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 878                                         >;
 879                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 880                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 881                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 882                                 };
 883
 884                                 spi3_pins_b: spi3@1 {
 885                                         reg = <1>;
 886                                         fsl,pinmux-ids = <
 887                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 888                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 889                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 890                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 891                                         >;
 892                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 893                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 894                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 895                                 };
 896
 897                                 usb0_pins_a: usb0@0 {
 898                                         reg = <0>;
 899                                         fsl,pinmux-ids = <
 900                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 901                                         >;
 902                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 903                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 904                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 905                                 };
 906
 907                                 usb0_pins_b: usb0@1 {
 908                                         reg = <1>;
 909                                         fsl,pinmux-ids = <
 910                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 911                                         >;
 912                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 913                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 914                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 915                                 };
 916
 917                                 usb1_pins_a: usb1@0 {
 918                                         reg = <0>;
 919                                         fsl,pinmux-ids = <
 920                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 921                                         >;
 922                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 923                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 924                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 925                                 };
 926
 927                                 usb0_id_pins_a: usb0id@0 {
 928                                         reg = <0>;
 929                                         fsl,pinmux-ids = <
 930                                                 MX28_PAD_AUART1_RTS__USB0_ID
 931                                         >;
 932                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 933                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 934                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 935                                 };
 936
 937                                 usb0_id_pins_b: usb0id1@0 {
 938                                         reg = <0>;
 939                                         fsl,pinmux-ids = <
 940                                                 MX28_PAD_PWM2__USB0_ID
 941                                         >;
 942                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 943                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 944                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 945                                 };
 946
 947                         };
 948
 949                         digctl: digctl@8001c000 {
 950                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 951                                 reg = <0x8001c000 0x2000>;
 952                                 interrupts = <89>;
 953                                 status = "disabled";
 954                         };
 955
 956                         etm: etm@80022000 {
 957                                 reg = <0x80022000 0x2000>;
 958                                 status = "disabled";
 959                         };
 960
 961                         dma_apbx: dma-apbx@80024000 {
 962                                 compatible = "fsl,imx28-dma-apbx";
 963                                 reg = <0x80024000 0x2000>;
 964                                 interrupts = <78 79 66 0
 965                                               80 81 68 69
 966                                               70 71 72 73
 967                                               74 75 76 77>;
 968                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 969                                                   "saif0", "saif1", "i2c0", "i2c1",
 970                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 971                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 972                                 #dma-cells = <1>;
 973                                 dma-channels = <16>;
 974                                 clocks = <&clks 26>;
 975                         };
 976
 977                         dcp: dcp@80028000 {
 978                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 979                                 reg = <0x80028000 0x2000>;
 980                                 interrupts = <52 53 54>;
 981                                 status = "okay";
 982                         };
 983
 984                         pxp: pxp@8002a000 {
 985                                 reg = <0x8002a000 0x2000>;
 986                                 interrupts = <39>;
 987                                 status = "disabled";
 988                         };
 989
 990                         ocotp: ocotp@8002c000 {
 991                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 992                                 #address-cells = <1>;
 993                                 #size-cells = <1>;
 994                                 reg = <0x8002c000 0x2000>;
 995                                 clocks = <&clks 25>;
 996                         };
 997
 998                         axi-ahb@8002e000 {
 999                                 reg = <0x8002e000 0x2000>;
1000                                 status = "disabled";
1001                         };
1002
1003                         lcdif: lcdif@80030000 {
1004                                 compatible = "fsl,imx28-lcdif";
1005                                 reg = <0x80030000 0x2000>;
1006                                 interrupts = <38>;
1007                                 clocks = <&clks 55>;
1008                                 dmas = <&dma_apbh 13>;
1009                                 dma-names = "rx";
1010                                 status = "disabled";
1011                         };
1012
1013                         can0: can@80032000 {
1014                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1015                                 reg = <0x80032000 0x2000>;
1016                                 interrupts = <8>;
1017                                 clocks = <&clks 58>, <&clks 58>;
1018                                 clock-names = "ipg", "per";
1019                                 status = "disabled";
1020                         };
1021
1022                         can1: can@80034000 {
1023                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1024                                 reg = <0x80034000 0x2000>;
1025                                 interrupts = <9>;
1026                                 clocks = <&clks 59>, <&clks 59>;
1027                                 clock-names = "ipg", "per";
1028                                 status = "disabled";
1029                         };
1030
1031                         simdbg: simdbg@8003c000 {
1032                                 reg = <0x8003c000 0x200>;
1033                                 status = "disabled";
1034                         };
1035
1036                         simgpmisel: simgpmisel@8003c200 {
1037                                 reg = <0x8003c200 0x100>;
1038                                 status = "disabled";
1039                         };
1040
1041                         simsspsel: simsspsel@8003c300 {
1042                                 reg = <0x8003c300 0x100>;
1043                                 status = "disabled";
1044                         };
1045
1046                         simmemsel: simmemsel@8003c400 {
1047                                 reg = <0x8003c400 0x100>;
1048                                 status = "disabled";
1049                         };
1050
1051                         gpiomon: gpiomon@8003c500 {
1052                                 reg = <0x8003c500 0x100>;
1053                                 status = "disabled";
1054                         };
1055
1056                         simenet: simenet@8003c700 {
1057                                 reg = <0x8003c700 0x100>;
1058                                 status = "disabled";
1059                         };
1060
1061                         armjtag: armjtag@8003c800 {
1062                                 reg = <0x8003c800 0x100>;
1063                                 status = "disabled";
1064                         };
1065                 };
1066
1067                 apbx@80040000 {
1068                         compatible = "simple-bus";
1069                         #address-cells = <1>;
1070                         #size-cells = <1>;
1071                         reg = <0x80040000 0x40000>;
1072                         ranges;
1073
1074                         clks: clkctrl@80040000 {
1075                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1076                                 reg = <0x80040000 0x2000>;
1077                                 #clock-cells = <1>;
1078                         };
1079
1080                         saif0: saif@80042000 {
1081                                 compatible = "fsl,imx28-saif";
1082                                 reg = <0x80042000 0x2000>;
1083                                 interrupts = <59>;
1084                                 #clock-cells = <0>;
1085                                 clocks = <&clks 53>;
1086                                 dmas = <&dma_apbx 4>;
1087                                 dma-names = "rx-tx";
1088                                 status = "disabled";
1089                         };
1090
1091                         power: power@80044000 {
1092                                 reg = <0x80044000 0x2000>;
1093                                 status = "disabled";
1094                         };
1095
1096                         saif1: saif@80046000 {
1097                                 compatible = "fsl,imx28-saif";
1098                                 reg = <0x80046000 0x2000>;
1099                                 interrupts = <58>;
1100                                 clocks = <&clks 54>;
1101                                 dmas = <&dma_apbx 5>;
1102                                 dma-names = "rx-tx";
1103                                 status = "disabled";
1104                         };
1105
1106                         lradc: lradc@80050000 {
1107                                 compatible = "fsl,imx28-lradc";
1108                                 reg = <0x80050000 0x2000>;
1109                                 interrupts = <10 14 15 16 17 18 19
1110                                                 20 21 22 23 24 25>;
1111                                 status = "disabled";
1112                                 clocks = <&clks 41>;
1113                                 #io-channel-cells = <1>;
1114                         };
1115
1116                         spdif: spdif@80054000 {
1117                                 reg = <0x80054000 0x2000>;
1118                                 interrupts = <45>;
1119                                 dmas = <&dma_apbx 2>;
1120                                 dma-names = "tx";
1121                                 status = "disabled";
1122                         };
1123
1124                         mxs_rtc: rtc@80056000 {
1125                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1126                                 reg = <0x80056000 0x2000>;
1127                                 interrupts = <29>;
1128                         };
1129
1130                         i2c0: i2c@80058000 {
1131                                 #address-cells = <1>;
1132                                 #size-cells = <0>;
1133                                 compatible = "fsl,imx28-i2c";
1134                                 reg = <0x80058000 0x2000>;
1135                                 interrupts = <111>;
1136                                 clock-frequency = <100000>;
1137                                 dmas = <&dma_apbx 6>;
1138                                 dma-names = "rx-tx";
1139                                 status = "disabled";
1140                         };
1141
1142                         i2c1: i2c@8005a000 {
1143                                 #address-cells = <1>;
1144                                 #size-cells = <0>;
1145                                 compatible = "fsl,imx28-i2c";
1146                                 reg = <0x8005a000 0x2000>;
1147                                 interrupts = <110>;
1148                                 clock-frequency = <100000>;
1149                                 dmas = <&dma_apbx 7>;
1150                                 dma-names = "rx-tx";
1151                                 status = "disabled";
1152                         };
1153
1154                         pwm: pwm@80064000 {
1155                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1156                                 reg = <0x80064000 0x2000>;
1157                                 clocks = <&clks 44>;
1158                                 #pwm-cells = <2>;
1159                                 fsl,pwm-number = <8>;
1160                                 status = "disabled";
1161                         };
1162
1163                         timer: timrot@80068000 {
1164                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1165                                 reg = <0x80068000 0x2000>;
1166                                 interrupts = <48 49 50 51>;
1167                                 clocks = <&clks 26>;
1168                         };
1169
1170                         auart0: serial@8006a000 {
1171                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1172                                 reg = <0x8006a000 0x2000>;
1173                                 interrupts = <112>;
1174                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1175                                 dma-names = "rx", "tx";
1176                                 clocks = <&clks 45>;
1177                                 status = "disabled";
1178                         };
1179
1180                         auart1: serial@8006c000 {
1181                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1182                                 reg = <0x8006c000 0x2000>;
1183                                 interrupts = <113>;
1184                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1185                                 dma-names = "rx", "tx";
1186                                 clocks = <&clks 45>;
1187                                 status = "disabled";
1188                         };
1189
1190                         auart2: serial@8006e000 {
1191                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1192                                 reg = <0x8006e000 0x2000>;
1193                                 interrupts = <114>;
1194                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1195                                 dma-names = "rx", "tx";
1196                                 clocks = <&clks 45>;
1197                                 status = "disabled";
1198                         };
1199
1200                         auart3: serial@80070000 {
1201                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1202                                 reg = <0x80070000 0x2000>;
1203                                 interrupts = <115>;
1204                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1205                                 dma-names = "rx", "tx";
1206                                 clocks = <&clks 45>;
1207                                 status = "disabled";
1208                         };
1209
1210                         auart4: serial@80072000 {
1211                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1212                                 reg = <0x80072000 0x2000>;
1213                                 interrupts = <116>;
1214                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1215                                 dma-names = "rx", "tx";
1216                                 clocks = <&clks 45>;
1217                                 status = "disabled";
1218                         };
1219
1220                         duart: serial@80074000 {
1221                                 compatible = "arm,pl011", "arm,primecell";
1222                                 reg = <0x80074000 0x1000>;
1223                                 interrupts = <47>;
1224                                 clocks = <&clks 45>, <&clks 26>;
1225                                 clock-names = "uart", "apb_pclk";
1226                                 status = "disabled";
1227                         };
1228
1229                         usbphy0: usbphy@8007c000 {
1230                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1231                                 reg = <0x8007c000 0x2000>;
1232                                 clocks = <&clks 62>;
1233                                 status = "disabled";
1234                         };
1235
1236                         usbphy1: usbphy@8007e000 {
1237                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1238                                 reg = <0x8007e000 0x2000>;
1239                                 clocks = <&clks 63>;
1240                                 status = "disabled";
1241                         };
1242                 };
1243         };
1244
1245         ahb@80080000 {
1246                 compatible = "simple-bus";
1247                 #address-cells = <1>;
1248                 #size-cells = <1>;
1249                 reg = <0x80080000 0x80000>;
1250                 ranges;
1251
1252                 usb0: usb@80080000 {
1253                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1254                         reg = <0x80080000 0x10000>;
1255                         interrupts = <93>;
1256                         clocks = <&clks 60>;
1257                         fsl,usbphy = <&usbphy0>;
1258                         status = "disabled";
1259                 };
1260
1261                 usb1: usb@80090000 {
1262                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1263                         reg = <0x80090000 0x10000>;
1264                         interrupts = <92>;
1265                         clocks = <&clks 61>;
1266                         fsl,usbphy = <&usbphy1>;
1267                         dr_mode = "host";
1268                         status = "disabled";
1269                 };
1270
1271                 dflpt: dflpt@800c0000 {
1272                         reg = <0x800c0000 0x10000>;
1273                         status = "disabled";
1274                 };
1275
1276                 mac0: ethernet@800f0000 {
1277                         compatible = "fsl,imx28-fec";
1278                         reg = <0x800f0000 0x4000>;
1279                         interrupts = <101>;
1280                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1281                         clock-names = "ipg", "ahb", "enet_out";
1282                         status = "disabled";
1283                 };
1284
1285                 mac1: ethernet@800f4000 {
1286                         compatible = "fsl,imx28-fec";
1287                         reg = <0x800f4000 0x4000>;
1288                         interrupts = <102>;
1289                         clocks = <&clks 57>, <&clks 57>;
1290                         clock-names = "ipg", "ahb";
1291                         status = "disabled";
1292                 };
1293
1294                 etn_switch: switch@800f8000 {
1295                         reg = <0x800f8000 0x8000>;
1296                         status = "disabled";
1297                 };
1298         };
1299
1300         iio-hwmon {
1301                 compatible = "iio-hwmon";
1302                 io-channels = <&lradc 8>;
1303         };
1304 };