2 * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
14 #include "imx6qdl-tx6.dtsi"
17 model = "Ka-Ro electronics TX6S-8035 Module";
18 compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
29 backlight: backlight {
30 compatible = "pwm-backlight";
31 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
32 power-supply = <®_3v3>;
34 * a poor man's way to create a 1:1 relationship between
35 * the PWM value and the actual duty cycle
37 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
38 10 11 12 13 14 15 16 17 18 19
39 20 21 22 23 24 25 26 27 28 29
40 30 31 32 33 34 35 36 37 38 39
41 40 41 42 43 44 45 46 47 48 49
42 50 51 52 53 54 55 56 57 58 59
43 60 61 62 63 64 65 66 67 68 69
44 70 71 72 73 74 75 76 77 78 79
45 80 81 82 83 84 85 86 87 88 89
46 90 91 92 93 94 95 96 97 98 99
48 default-brightness-level = <50>;
51 display: display@di0 {
52 compatible = "fsl,imx-parallel-display";
53 interface-pix-fmt = "rgb24";
54 pinctrl-names = "default";
55 pinctrl-0 = <&pinctrl_disp0_1>;
59 display0_in: endpoint {
60 remote-endpoint = <&ipu1_di0_disp0>;
66 clock-frequency = <25200000>;
78 pixelclk-active = <0>;
82 clock-frequency = <25200000>;
94 pixelclk-active = <0>;
98 clock-frequency = <6413760>;
110 pixelclk-active = <0>;
114 clock-frequency = <9009000>;
126 pixelclk-active = <1>;
130 clock-frequency = <33264000>;
142 pixelclk-active = <0>;
145 ET0700 { /* same as ET0500 */
146 clock-frequency = <33264000>;
158 pixelclk-active = <0>;
162 clock-frequency = <6596040>;
174 pixelclk-active = <0>;
190 pinctrl_usdhc4: usdhc4grp {
192 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
193 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
194 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
195 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
196 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
197 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
198 MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
205 remote-endpoint = <&display0_in>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&pinctrl_usdhc4>;