2 * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
14 #include "imx6qdl-tx6.dtsi"
17 model = "Ka-Ro electronics TX6U-811x Module";
18 compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
26 backlight0: backlight0 {
27 compatible = "pwm-backlight";
28 pwms = <&pwm2 0 500000 0>;
29 power-supply = <®_lcd0_pwr>;
31 * a poor man's way to create a 1:1 relationship between
32 * the PWM value and the actual duty cycle
34 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
35 10 11 12 13 14 15 16 17 18 19
36 20 21 22 23 24 25 26 27 28 29
37 30 31 32 33 34 35 36 37 38 39
38 40 41 42 43 44 45 46 47 48 49
39 50 51 52 53 54 55 56 57 58 59
40 60 61 62 63 64 65 66 67 68 69
41 70 71 72 73 74 75 76 77 78 79
42 80 81 82 83 84 85 86 87 88 89
43 90 91 92 93 94 95 96 97 98 99
45 default-brightness-level = <50>;
48 backlight1: backlight1 {
49 compatible = "pwm-backlight";
50 pwms = <&pwm1 0 500000 0>;
51 power-supply = <®_lcd1_pwr>;
53 * a poor man's way to create a 1:1 relationship between
54 * the PWM value and the actual duty cycle
56 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
57 10 11 12 13 14 15 16 17 18 19
58 20 21 22 23 24 25 26 27 28 29
59 30 31 32 33 34 35 36 37 38 39
60 40 41 42 43 44 45 46 47 48 49
61 50 51 52 53 54 55 56 57 58 59
62 60 61 62 63 64 65 66 67 68 69
63 70 71 72 73 74 75 76 77 78 79
64 80 81 82 83 84 85 86 87 88 89
65 90 91 92 93 94 95 96 97 98 99
67 default-brightness-level = <50>;
71 compatible = "fsl,mxc_sdc_fb";
73 interface_pix_fmt = "RGB666";
84 compatible = "eeti,egalax_ts";
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_eeti>;
88 interrupt-parent = <&gpio3>;
90 wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
97 pinctrl_eeti: eetigrp {
99 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
106 status = "disabled"; /* pads partially clash with backlight1 PWM */
119 native-mode = <&lvds_timing0>;
121 lvds_timing0: hsd100pxn1 {
122 clock-frequency = <65000000>;
132 pixelclk-active = <1>;