2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
13 #include <dt-bindings/interrupt-controller/arm-gic.h>
15 #include "skeleton.dtsi"
48 intc: interrupt-controller@00a01000 {
49 compatible = "arm,cortex-a9-gic";
50 #interrupt-cells = <3>;
52 reg = <0x00a01000 0x1000>,
61 compatible = "fsl,imx-ckil", "fixed-clock";
63 clock-frequency = <32768>;
67 compatible = "fsl,imx-ckih1", "fixed-clock";
69 clock-frequency = <0>;
73 compatible = "fsl,imx-osc", "fixed-clock";
75 clock-frequency = <24000000>;
82 compatible = "simple-bus";
83 interrupt-parent = <&intc>;
86 dma_apbh: dma-apbh@00110000 {
87 compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
88 reg = <0x00110000 0x2000>;
89 interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
90 <0 13 IRQ_TYPE_LEVEL_HIGH>,
91 <0 13 IRQ_TYPE_LEVEL_HIGH>,
92 <0 13 IRQ_TYPE_LEVEL_HIGH>;
93 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
99 gpmi: gpmi-nand@00112000 {
100 compatible = "fsl,imx6q-gpmi-nand";
101 #address-cells = <1>;
103 reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
104 reg-names = "gpmi-nand", "bch";
105 interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
106 interrupt-names = "bch";
107 clocks = <&clks 152>, <&clks 153>, <&clks 151>,
108 <&clks 150>, <&clks 149>;
109 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
110 "gpmi_bch_apb", "per1_bch";
111 dmas = <&dma_apbh 0>;
117 compatible = "arm,cortex-a9-twd-timer";
118 reg = <0x00a00600 0x20>;
119 interrupts = <1 13 0xf01>;
123 L2: l2-cache@00a02000 {
124 compatible = "arm,pl310-cache";
125 reg = <0x00a02000 0x1000>;
126 interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
129 arm,tag-latency = <4 2 3>;
130 arm,data-latency = <4 2 3>;
133 pcie: pcie@0x01000000 {
134 compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
135 reg = <0x01ffc000 0x4000>; /* DBI */
136 #address-cells = <3>;
139 ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
140 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
141 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
143 interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
144 #interrupt-cells = <1>;
145 interrupt-map-mask = <0 0 0 0x7>;
146 interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
147 <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
148 <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
149 <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
150 clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
151 clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
156 compatible = "arm,cortex-a9-pmu";
157 interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
160 aips-bus@02000000 { /* AIPS1 */
161 compatible = "fsl,aips-bus", "simple-bus";
162 #address-cells = <1>;
164 reg = <0x02000000 0x100000>;
168 compatible = "fsl,spba-bus", "simple-bus";
169 #address-cells = <1>;
171 reg = <0x02000000 0x40000>;
174 spdif: spdif@02004000 {
175 compatible = "fsl,imx35-spdif";
176 reg = <0x02004000 0x4000>;
177 interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
178 dmas = <&sdma 14 18 0>,
180 dma-names = "rx", "tx";
181 clocks = <&clks 197>, <&clks 3>,
182 <&clks 197>, <&clks 107>,
183 <&clks 0>, <&clks 118>,
184 <&clks 0>, <&clks 139>,
186 clock-names = "core", "rxtx0",
194 ecspi1: ecspi@02008000 {
195 #address-cells = <1>;
197 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
198 reg = <0x02008000 0x4000>;
199 interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
200 clocks = <&clks 112>, <&clks 112>;
201 clock-names = "ipg", "per";
202 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
203 dma-names = "rx", "tx";
207 ecspi2: ecspi@0200c000 {
208 #address-cells = <1>;
210 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
211 reg = <0x0200c000 0x4000>;
212 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
213 clocks = <&clks 113>, <&clks 113>;
214 clock-names = "ipg", "per";
215 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
216 dma-names = "rx", "tx";
220 ecspi3: ecspi@02010000 {
221 #address-cells = <1>;
223 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
224 reg = <0x02010000 0x4000>;
225 interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
226 clocks = <&clks 114>, <&clks 114>;
227 clock-names = "ipg", "per";
228 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
229 dma-names = "rx", "tx";
233 ecspi4: ecspi@02014000 {
234 #address-cells = <1>;
236 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
237 reg = <0x02014000 0x4000>;
238 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
239 clocks = <&clks 115>, <&clks 115>;
240 clock-names = "ipg", "per";
241 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
242 dma-names = "rx", "tx";
246 uart1: serial@02020000 {
247 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
248 reg = <0x02020000 0x4000>;
249 interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
250 clocks = <&clks 160>, <&clks 161>;
251 clock-names = "ipg", "per";
252 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
253 dma-names = "rx", "tx";
257 esai: esai@02024000 {
258 reg = <0x02024000 0x4000>;
259 interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
263 compatible = "fsl,imx6q-ssi",
266 reg = <0x02028000 0x4000>;
267 interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
268 clocks = <&clks 178>;
269 dmas = <&sdma 37 1 0>,
271 dma-names = "rx", "tx";
272 fsl,fifo-depth = <15>;
273 fsl,ssi-dma-events = <38 37>;
278 compatible = "fsl,imx6q-ssi",
281 reg = <0x0202c000 0x4000>;
282 interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
283 clocks = <&clks 179>;
284 dmas = <&sdma 41 1 0>,
286 dma-names = "rx", "tx";
287 fsl,fifo-depth = <15>;
288 fsl,ssi-dma-events = <42 41>;
293 compatible = "fsl,imx6q-ssi",
296 reg = <0x02030000 0x4000>;
297 interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
298 clocks = <&clks 180>;
299 dmas = <&sdma 45 1 0>,
301 dma-names = "rx", "tx";
302 fsl,fifo-depth = <15>;
303 fsl,ssi-dma-events = <46 45>;
307 asrc: asrc@02034000 {
308 reg = <0x02034000 0x4000>;
309 interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
313 reg = <0x0203c000 0x4000>;
318 reg = <0x02040000 0x3c000>;
319 interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
320 <0 12 IRQ_TYPE_LEVEL_HIGH>;
323 aipstz@0207c000 { /* AIPSTZ1 */
324 reg = <0x0207c000 0x4000>;
329 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
330 reg = <0x02080000 0x4000>;
331 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
332 clocks = <&clks 62>, <&clks 145>;
333 clock-names = "ipg", "per";
338 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
339 reg = <0x02084000 0x4000>;
340 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
341 clocks = <&clks 62>, <&clks 146>;
342 clock-names = "ipg", "per";
347 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
348 reg = <0x02088000 0x4000>;
349 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
350 clocks = <&clks 62>, <&clks 147>;
351 clock-names = "ipg", "per";
356 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
357 reg = <0x0208c000 0x4000>;
358 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
359 clocks = <&clks 62>, <&clks 148>;
360 clock-names = "ipg", "per";
363 can1: flexcan@02090000 {
364 compatible = "fsl,imx6q-flexcan";
365 reg = <0x02090000 0x4000>;
366 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
367 clocks = <&clks 108>, <&clks 109>;
368 clock-names = "ipg", "per";
372 can2: flexcan@02094000 {
373 compatible = "fsl,imx6q-flexcan";
374 reg = <0x02094000 0x4000>;
375 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
376 clocks = <&clks 110>, <&clks 111>;
377 clock-names = "ipg", "per";
382 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
383 reg = <0x02098000 0x4000>;
384 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
385 clocks = <&clks 119>, <&clks 120>;
386 clock-names = "ipg", "per";
389 gpio1: gpio@0209c000 {
390 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
391 reg = <0x0209c000 0x4000>;
392 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
393 <0 67 IRQ_TYPE_LEVEL_HIGH>;
396 interrupt-controller;
397 #interrupt-cells = <2>;
400 gpio2: gpio@020a0000 {
401 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
402 reg = <0x020a0000 0x4000>;
403 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
404 <0 69 IRQ_TYPE_LEVEL_HIGH>;
407 interrupt-controller;
408 #interrupt-cells = <2>;
411 gpio3: gpio@020a4000 {
412 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
413 reg = <0x020a4000 0x4000>;
414 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
415 <0 71 IRQ_TYPE_LEVEL_HIGH>;
418 interrupt-controller;
419 #interrupt-cells = <2>;
422 gpio4: gpio@020a8000 {
423 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
424 reg = <0x020a8000 0x4000>;
425 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
426 <0 73 IRQ_TYPE_LEVEL_HIGH>;
429 interrupt-controller;
430 #interrupt-cells = <2>;
433 gpio5: gpio@020ac000 {
434 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
435 reg = <0x020ac000 0x4000>;
436 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
437 <0 75 IRQ_TYPE_LEVEL_HIGH>;
440 interrupt-controller;
441 #interrupt-cells = <2>;
444 gpio6: gpio@020b0000 {
445 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
446 reg = <0x020b0000 0x4000>;
447 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
448 <0 77 IRQ_TYPE_LEVEL_HIGH>;
451 interrupt-controller;
452 #interrupt-cells = <2>;
455 gpio7: gpio@020b4000 {
456 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
457 reg = <0x020b4000 0x4000>;
458 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
459 <0 79 IRQ_TYPE_LEVEL_HIGH>;
462 interrupt-controller;
463 #interrupt-cells = <2>;
467 reg = <0x020b8000 0x4000>;
468 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
471 wdog1: wdog@020bc000 {
472 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
473 reg = <0x020bc000 0x4000>;
474 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
478 wdog2: wdog@020c0000 {
479 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
480 reg = <0x020c0000 0x4000>;
481 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
487 compatible = "fsl,imx6q-ccm";
488 reg = <0x020c4000 0x4000>;
489 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
490 <0 88 IRQ_TYPE_LEVEL_HIGH>;
494 anatop: anatop@020c8000 {
495 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
496 reg = <0x020c8000 0x1000>;
497 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
498 <0 54 IRQ_TYPE_LEVEL_HIGH>,
499 <0 127 IRQ_TYPE_LEVEL_HIGH>;
502 compatible = "fsl,anatop-regulator";
503 regulator-name = "vdd1p1";
504 regulator-min-microvolt = <800000>;
505 regulator-max-microvolt = <1375000>;
507 anatop-reg-offset = <0x110>;
508 anatop-vol-bit-shift = <8>;
509 anatop-vol-bit-width = <5>;
510 anatop-min-bit-val = <4>;
511 anatop-min-voltage = <800000>;
512 anatop-max-voltage = <1375000>;
516 compatible = "fsl,anatop-regulator";
517 regulator-name = "vdd3p0";
518 regulator-min-microvolt = <2800000>;
519 regulator-max-microvolt = <3150000>;
521 anatop-reg-offset = <0x120>;
522 anatop-vol-bit-shift = <8>;
523 anatop-vol-bit-width = <5>;
524 anatop-min-bit-val = <0>;
525 anatop-min-voltage = <2625000>;
526 anatop-max-voltage = <3400000>;
530 compatible = "fsl,anatop-regulator";
531 regulator-name = "vdd2p5";
532 regulator-min-microvolt = <2000000>;
533 regulator-max-microvolt = <2750000>;
535 anatop-reg-offset = <0x130>;
536 anatop-vol-bit-shift = <8>;
537 anatop-vol-bit-width = <5>;
538 anatop-min-bit-val = <0>;
539 anatop-min-voltage = <2000000>;
540 anatop-max-voltage = <2750000>;
543 reg_arm: regulator-vddcore@140 {
544 compatible = "fsl,anatop-regulator";
545 regulator-name = "vddarm";
546 regulator-min-microvolt = <725000>;
547 regulator-max-microvolt = <1450000>;
549 anatop-reg-offset = <0x140>;
550 anatop-vol-bit-shift = <0>;
551 anatop-vol-bit-width = <5>;
552 anatop-delay-reg-offset = <0x170>;
553 anatop-delay-bit-shift = <24>;
554 anatop-delay-bit-width = <2>;
555 anatop-min-bit-val = <1>;
556 anatop-min-voltage = <725000>;
557 anatop-max-voltage = <1450000>;
560 reg_pu: regulator-vddpu@140 {
561 compatible = "fsl,anatop-regulator";
562 regulator-name = "vddpu";
563 regulator-min-microvolt = <725000>;
564 regulator-max-microvolt = <1450000>;
566 anatop-reg-offset = <0x140>;
567 anatop-vol-bit-shift = <9>;
568 anatop-vol-bit-width = <5>;
569 anatop-delay-reg-offset = <0x170>;
570 anatop-delay-bit-shift = <26>;
571 anatop-delay-bit-width = <2>;
572 anatop-min-bit-val = <1>;
573 anatop-min-voltage = <725000>;
574 anatop-max-voltage = <1450000>;
577 reg_soc: regulator-vddsoc@140 {
578 compatible = "fsl,anatop-regulator";
579 regulator-name = "vddsoc";
580 regulator-min-microvolt = <725000>;
581 regulator-max-microvolt = <1450000>;
583 anatop-reg-offset = <0x140>;
584 anatop-vol-bit-shift = <18>;
585 anatop-vol-bit-width = <5>;
586 anatop-delay-reg-offset = <0x170>;
587 anatop-delay-bit-shift = <28>;
588 anatop-delay-bit-width = <2>;
589 anatop-min-bit-val = <1>;
590 anatop-min-voltage = <725000>;
591 anatop-max-voltage = <1450000>;
596 compatible = "fsl,imx6q-tempmon";
597 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
598 fsl,tempmon = <&anatop>;
599 fsl,tempmon-data = <&ocotp>;
600 clocks = <&clks 172>;
603 usbphy1: usbphy@020c9000 {
604 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
605 reg = <0x020c9000 0x1000>;
606 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
607 clocks = <&clks 182>;
608 fsl,anatop = <&anatop>;
611 usbphy2: usbphy@020ca000 {
612 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
613 reg = <0x020ca000 0x1000>;
614 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
615 clocks = <&clks 183>;
616 fsl,anatop = <&anatop>;
620 compatible = "fsl,sec-v4.0-mon", "simple-bus";
621 #address-cells = <1>;
623 ranges = <0 0x020cc000 0x4000>;
626 compatible = "fsl,sec-v4.0-mon-rtc-lp";
628 interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
629 <0 20 IRQ_TYPE_LEVEL_HIGH>;
633 epit1: epit@020d0000 { /* EPIT1 */
634 reg = <0x020d0000 0x4000>;
635 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
638 epit2: epit@020d4000 { /* EPIT2 */
639 reg = <0x020d4000 0x4000>;
640 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
644 compatible = "fsl,imx6q-src", "fsl,imx51-src";
645 reg = <0x020d8000 0x4000>;
646 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
647 <0 96 IRQ_TYPE_LEVEL_HIGH>;
652 compatible = "fsl,imx6q-gpc";
653 reg = <0x020dc000 0x4000>;
654 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
655 <0 90 IRQ_TYPE_LEVEL_HIGH>;
658 gpr: iomuxc-gpr@020e0000 {
659 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
660 reg = <0x020e0000 0x38>;
663 iomuxc: iomuxc@020e0000 {
664 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
665 reg = <0x020e0000 0x4000>;
669 #address-cells = <1>;
671 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
676 #address-cells = <1>;
684 lvds0_mux_0: endpoint {
685 remote-endpoint = <&ipu1_di0_lvds0>;
692 lvds0_mux_1: endpoint {
693 remote-endpoint = <&ipu1_di1_lvds0>;
699 #address-cells = <1>;
707 lvds1_mux_0: endpoint {
708 remote-endpoint = <&ipu1_di0_lvds1>;
715 lvds1_mux_1: endpoint {
716 remote-endpoint = <&ipu1_di1_lvds1>;
723 #address-cells = <1>;
725 reg = <0x00120000 0x9000>;
726 interrupts = <0 115 0x04>;
728 clocks = <&clks 123>, <&clks 124>;
729 clock-names = "iahb", "isfr";
735 hdmi_mux_0: endpoint {
736 remote-endpoint = <&ipu1_di0_hdmi>;
743 hdmi_mux_1: endpoint {
744 remote-endpoint = <&ipu1_di1_hdmi>;
749 dcic1: dcic@020e4000 {
750 reg = <0x020e4000 0x4000>;
751 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
754 dcic2: dcic@020e8000 {
755 reg = <0x020e8000 0x4000>;
756 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
759 sdma: sdma@020ec000 {
760 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
761 reg = <0x020ec000 0x4000>;
762 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
763 clocks = <&clks 155>, <&clks 155>;
764 clock-names = "ipg", "ahb";
766 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
770 aips-bus@02100000 { /* AIPS2 */
771 compatible = "fsl,aips-bus", "simple-bus";
772 #address-cells = <1>;
774 reg = <0x02100000 0x100000>;
778 reg = <0x02100000 0x40000>;
779 interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
780 <0 106 IRQ_TYPE_LEVEL_HIGH>;
783 aipstz@0217c000 { /* AIPSTZ2 */
784 reg = <0x0217c000 0x4000>;
787 usbotg: usb@02184000 {
788 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
789 reg = <0x02184000 0x200>;
790 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
791 clocks = <&clks 162>;
792 fsl,usbphy = <&usbphy1>;
793 fsl,usbmisc = <&usbmisc 0>;
797 usbh1: usb@02184200 {
798 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
799 reg = <0x02184200 0x200>;
800 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
801 clocks = <&clks 162>;
802 fsl,usbphy = <&usbphy2>;
803 fsl,usbmisc = <&usbmisc 1>;
807 usbh2: usb@02184400 {
808 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
809 reg = <0x02184400 0x200>;
810 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
811 clocks = <&clks 162>;
812 fsl,usbmisc = <&usbmisc 2>;
816 usbh3: usb@02184600 {
817 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
818 reg = <0x02184600 0x200>;
819 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
820 clocks = <&clks 162>;
821 fsl,usbmisc = <&usbmisc 3>;
825 usbmisc: usbmisc@02184800 {
827 compatible = "fsl,imx6q-usbmisc";
828 reg = <0x02184800 0x200>;
829 clocks = <&clks 162>;
832 fec: ethernet@02188000 {
833 compatible = "fsl,imx6q-fec";
834 reg = <0x02188000 0x4000>;
835 interrupts-extended =
836 <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
837 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
838 clocks = <&clks 117>, <&clks 117>, <&clks 190>;
839 clock-names = "ipg", "ahb", "ptp";
844 reg = <0x0218c000 0x4000>;
845 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
846 <0 117 IRQ_TYPE_LEVEL_HIGH>,
847 <0 126 IRQ_TYPE_LEVEL_HIGH>;
850 usdhc1: usdhc@02190000 {
851 compatible = "fsl,imx6q-usdhc";
852 reg = <0x02190000 0x4000>;
853 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
854 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
855 clock-names = "ipg", "ahb", "per";
860 usdhc2: usdhc@02194000 {
861 compatible = "fsl,imx6q-usdhc";
862 reg = <0x02194000 0x4000>;
863 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
864 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
865 clock-names = "ipg", "ahb", "per";
870 usdhc3: usdhc@02198000 {
871 compatible = "fsl,imx6q-usdhc";
872 reg = <0x02198000 0x4000>;
873 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
874 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
875 clock-names = "ipg", "ahb", "per";
880 usdhc4: usdhc@0219c000 {
881 compatible = "fsl,imx6q-usdhc";
882 reg = <0x0219c000 0x4000>;
883 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
884 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
885 clock-names = "ipg", "ahb", "per";
891 #address-cells = <1>;
893 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
894 reg = <0x021a0000 0x4000>;
895 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
896 clocks = <&clks 125>;
901 #address-cells = <1>;
903 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
904 reg = <0x021a4000 0x4000>;
905 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
906 clocks = <&clks 126>;
911 #address-cells = <1>;
913 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
914 reg = <0x021a8000 0x4000>;
915 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
916 clocks = <&clks 127>;
921 reg = <0x021ac000 0x4000>;
924 mmdc0: mmdc@021b0000 { /* MMDC0 */
925 compatible = "fsl,imx6q-mmdc";
926 reg = <0x021b0000 0x4000>;
929 mmdc1: mmdc@021b4000 { /* MMDC1 */
930 reg = <0x021b4000 0x4000>;
933 weim: weim@021b8000 {
934 compatible = "fsl,imx6q-weim";
935 reg = <0x021b8000 0x4000>;
936 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
937 clocks = <&clks 196>;
940 ocotp: ocotp@021bc000 {
941 compatible = "fsl,imx6q-ocotp", "syscon";
942 reg = <0x021bc000 0x4000>;
945 tzasc@021d0000 { /* TZASC1 */
946 reg = <0x021d0000 0x4000>;
947 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
950 tzasc@021d4000 { /* TZASC2 */
951 reg = <0x021d4000 0x4000>;
952 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
955 audmux: audmux@021d8000 {
956 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
957 reg = <0x021d8000 0x4000>;
961 mipi_csi: mipi@021dc000 {
962 reg = <0x021dc000 0x4000>;
965 mipi_dsi: mipi@021e0000 {
966 #address-cells = <1>;
968 reg = <0x021e0000 0x4000>;
974 mipi_mux_0: endpoint {
975 remote-endpoint = <&ipu1_di0_mipi>;
982 mipi_mux_1: endpoint {
983 remote-endpoint = <&ipu1_di1_mipi>;
989 reg = <0x021e4000 0x4000>;
990 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
993 uart2: serial@021e8000 {
994 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
995 reg = <0x021e8000 0x4000>;
996 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
997 clocks = <&clks 160>, <&clks 161>;
998 clock-names = "ipg", "per";
999 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1000 dma-names = "rx", "tx";
1001 status = "disabled";
1004 uart3: serial@021ec000 {
1005 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1006 reg = <0x021ec000 0x4000>;
1007 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
1008 clocks = <&clks 160>, <&clks 161>;
1009 clock-names = "ipg", "per";
1010 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1011 dma-names = "rx", "tx";
1012 status = "disabled";
1015 uart4: serial@021f0000 {
1016 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1017 reg = <0x021f0000 0x4000>;
1018 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
1019 clocks = <&clks 160>, <&clks 161>;
1020 clock-names = "ipg", "per";
1021 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1022 dma-names = "rx", "tx";
1023 status = "disabled";
1026 uart5: serial@021f4000 {
1027 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1028 reg = <0x021f4000 0x4000>;
1029 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
1030 clocks = <&clks 160>, <&clks 161>;
1031 clock-names = "ipg", "per";
1032 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1033 dma-names = "rx", "tx";
1034 status = "disabled";
1038 ipu1: ipu@02400000 {
1039 #address-cells = <1>;
1041 compatible = "fsl,imx6q-ipu";
1042 reg = <0x02400000 0x400000>;
1043 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
1044 <0 5 IRQ_TYPE_LEVEL_HIGH>;
1045 clocks = <&clks 130>, <&clks 131>, <&clks 132>;
1046 clock-names = "bus", "di0", "di1";
1050 #address-cells = <1>;
1054 ipu1_di0_disp0: endpoint@0 {
1057 ipu1_di0_hdmi: endpoint@1 {
1058 remote-endpoint = <&hdmi_mux_0>;
1061 ipu1_di0_mipi: endpoint@2 {
1062 remote-endpoint = <&mipi_mux_0>;
1065 ipu1_di0_lvds0: endpoint@3 {
1066 remote-endpoint = <&lvds0_mux_0>;
1069 ipu1_di0_lvds1: endpoint@4 {
1070 remote-endpoint = <&lvds1_mux_0>;
1075 #address-cells = <1>;
1079 ipu1_di0_disp1: endpoint@0 {
1082 ipu1_di1_hdmi: endpoint@1 {
1083 remote-endpoint = <&hdmi_mux_1>;
1086 ipu1_di1_mipi: endpoint@2 {
1087 remote-endpoint = <&mipi_mux_1>;
1090 ipu1_di1_lvds0: endpoint@3 {
1091 remote-endpoint = <&lvds0_mux_1>;
1094 ipu1_di1_lvds1: endpoint@4 {
1095 remote-endpoint = <&lvds1_mux_1>;