2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
13 #include <dt-bindings/interrupt-controller/arm-gic.h>
15 #include "skeleton.dtsi"
49 intc: interrupt-controller@00a01000 {
50 compatible = "arm,cortex-a9-gic";
51 #interrupt-cells = <3>;
53 reg = <0x00a01000 0x1000>,
62 compatible = "fsl,imx-ckil", "fixed-clock";
64 clock-frequency = <32768>;
68 compatible = "fsl,imx-ckih1", "fixed-clock";
70 clock-frequency = <0>;
74 compatible = "fsl,imx-osc", "fixed-clock";
76 clock-frequency = <24000000>;
83 compatible = "simple-bus";
84 interrupt-parent = <&intc>;
87 dma_apbh: dma-apbh@00110000 {
88 compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
89 reg = <0x00110000 0x2000>;
90 interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
91 <0 13 IRQ_TYPE_LEVEL_HIGH>,
92 <0 13 IRQ_TYPE_LEVEL_HIGH>,
93 <0 13 IRQ_TYPE_LEVEL_HIGH>;
94 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
100 gpmi: gpmi-nand@00112000 {
101 compatible = "fsl,imx6q-gpmi-nand";
102 #address-cells = <1>;
104 reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
105 reg-names = "gpmi-nand", "bch";
106 interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
107 interrupt-names = "bch";
108 clocks = <&clks 152>, <&clks 153>, <&clks 151>,
109 <&clks 150>, <&clks 149>;
110 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
111 "gpmi_bch_apb", "per1_bch";
112 dmas = <&dma_apbh 0>;
118 compatible = "arm,cortex-a9-twd-timer";
119 reg = <0x00a00600 0x20>;
120 interrupts = <1 13 0xf01>;
124 L2: l2-cache@00a02000 {
125 compatible = "arm,pl310-cache";
126 reg = <0x00a02000 0x1000>;
127 interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
130 arm,tag-latency = <4 2 3>;
131 arm,data-latency = <4 2 3>;
134 pcie: pcie@0x01000000 {
135 compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
136 reg = <0x01ffc000 0x4000>; /* DBI */
137 #address-cells = <3>;
140 ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
141 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
142 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
144 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
145 interrupt-names = "msi";
146 #interrupt-cells = <1>;
147 interrupt-map-mask = <0 0 0 0x7>;
148 interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
149 <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
150 <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
151 <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
152 clocks = <&clks 144>, <&clks 206>, <&clks 189>;
153 clock-names = "pcie", "pcie_bus", "pcie_phy";
158 compatible = "arm,cortex-a9-pmu";
159 interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
162 aips-bus@02000000 { /* AIPS1 */
163 compatible = "fsl,aips-bus", "simple-bus";
164 #address-cells = <1>;
166 reg = <0x02000000 0x100000>;
170 compatible = "fsl,spba-bus", "simple-bus";
171 #address-cells = <1>;
173 reg = <0x02000000 0x40000>;
176 spdif: spdif@02004000 {
177 compatible = "fsl,imx35-spdif";
178 reg = <0x02004000 0x4000>;
179 interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
180 dmas = <&sdma 14 18 0>,
182 dma-names = "rx", "tx";
183 clocks = <&clks 197>, <&clks 3>,
184 <&clks 197>, <&clks 0>,
185 <&clks 0>, <&clks 0>,
186 <&clks 0>, <&clks 0>,
188 clock-names = "core", "rxtx0",
196 ecspi1: ecspi@02008000 {
197 #address-cells = <1>;
199 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
200 reg = <0x02008000 0x4000>;
201 interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
202 clocks = <&clks 112>, <&clks 112>;
203 clock-names = "ipg", "per";
204 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
205 dma-names = "rx", "tx";
209 ecspi2: ecspi@0200c000 {
210 #address-cells = <1>;
212 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
213 reg = <0x0200c000 0x4000>;
214 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
215 clocks = <&clks 113>, <&clks 113>;
216 clock-names = "ipg", "per";
217 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
218 dma-names = "rx", "tx";
222 ecspi3: ecspi@02010000 {
223 #address-cells = <1>;
225 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
226 reg = <0x02010000 0x4000>;
227 interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
228 clocks = <&clks 114>, <&clks 114>;
229 clock-names = "ipg", "per";
230 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
231 dma-names = "rx", "tx";
235 ecspi4: ecspi@02014000 {
236 #address-cells = <1>;
238 compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
239 reg = <0x02014000 0x4000>;
240 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
241 clocks = <&clks 115>, <&clks 115>;
242 clock-names = "ipg", "per";
243 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
244 dma-names = "rx", "tx";
248 uart1: serial@02020000 {
249 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
250 reg = <0x02020000 0x4000>;
251 interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
252 clocks = <&clks 160>, <&clks 161>;
253 clock-names = "ipg", "per";
254 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
255 dma-names = "rx", "tx";
259 esai: esai@02024000 {
260 reg = <0x02024000 0x4000>;
261 interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
265 compatible = "fsl,imx6q-ssi",
268 reg = <0x02028000 0x4000>;
269 interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
270 clocks = <&clks 178>;
271 dmas = <&sdma 37 1 0>,
273 dma-names = "rx", "tx";
274 fsl,fifo-depth = <15>;
279 compatible = "fsl,imx6q-ssi",
282 reg = <0x0202c000 0x4000>;
283 interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
284 clocks = <&clks 179>;
285 dmas = <&sdma 41 1 0>,
287 dma-names = "rx", "tx";
288 fsl,fifo-depth = <15>;
293 compatible = "fsl,imx6q-ssi",
296 reg = <0x02030000 0x4000>;
297 interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
298 clocks = <&clks 180>;
299 dmas = <&sdma 45 1 0>,
301 dma-names = "rx", "tx";
302 fsl,fifo-depth = <15>;
306 asrc: asrc@02034000 {
307 reg = <0x02034000 0x4000>;
308 interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
312 reg = <0x0203c000 0x4000>;
317 reg = <0x02040000 0x3c000>;
318 interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
319 <0 12 IRQ_TYPE_LEVEL_HIGH>;
322 aipstz@0207c000 { /* AIPSTZ1 */
323 reg = <0x0207c000 0x4000>;
328 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
329 reg = <0x02080000 0x4000>;
330 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
331 clocks = <&clks 62>, <&clks 145>;
332 clock-names = "ipg", "per";
337 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
338 reg = <0x02084000 0x4000>;
339 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
340 clocks = <&clks 62>, <&clks 146>;
341 clock-names = "ipg", "per";
346 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
347 reg = <0x02088000 0x4000>;
348 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
349 clocks = <&clks 62>, <&clks 147>;
350 clock-names = "ipg", "per";
355 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
356 reg = <0x0208c000 0x4000>;
357 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
358 clocks = <&clks 62>, <&clks 148>;
359 clock-names = "ipg", "per";
362 can1: flexcan@02090000 {
363 compatible = "fsl,imx6q-flexcan";
364 reg = <0x02090000 0x4000>;
365 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
366 clocks = <&clks 108>, <&clks 109>;
367 clock-names = "ipg", "per";
371 can2: flexcan@02094000 {
372 compatible = "fsl,imx6q-flexcan";
373 reg = <0x02094000 0x4000>;
374 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
375 clocks = <&clks 110>, <&clks 111>;
376 clock-names = "ipg", "per";
381 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
382 reg = <0x02098000 0x4000>;
383 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
384 clocks = <&clks 119>, <&clks 120>;
385 clock-names = "ipg", "per";
388 gpio1: gpio@0209c000 {
389 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
390 reg = <0x0209c000 0x4000>;
391 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
392 <0 67 IRQ_TYPE_LEVEL_HIGH>;
395 interrupt-controller;
396 #interrupt-cells = <2>;
399 gpio2: gpio@020a0000 {
400 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
401 reg = <0x020a0000 0x4000>;
402 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
403 <0 69 IRQ_TYPE_LEVEL_HIGH>;
406 interrupt-controller;
407 #interrupt-cells = <2>;
410 gpio3: gpio@020a4000 {
411 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
412 reg = <0x020a4000 0x4000>;
413 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
414 <0 71 IRQ_TYPE_LEVEL_HIGH>;
417 interrupt-controller;
418 #interrupt-cells = <2>;
421 gpio4: gpio@020a8000 {
422 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
423 reg = <0x020a8000 0x4000>;
424 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
425 <0 73 IRQ_TYPE_LEVEL_HIGH>;
428 interrupt-controller;
429 #interrupt-cells = <2>;
432 gpio5: gpio@020ac000 {
433 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
434 reg = <0x020ac000 0x4000>;
435 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
436 <0 75 IRQ_TYPE_LEVEL_HIGH>;
439 interrupt-controller;
440 #interrupt-cells = <2>;
443 gpio6: gpio@020b0000 {
444 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
445 reg = <0x020b0000 0x4000>;
446 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
447 <0 77 IRQ_TYPE_LEVEL_HIGH>;
450 interrupt-controller;
451 #interrupt-cells = <2>;
454 gpio7: gpio@020b4000 {
455 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
456 reg = <0x020b4000 0x4000>;
457 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
458 <0 79 IRQ_TYPE_LEVEL_HIGH>;
461 interrupt-controller;
462 #interrupt-cells = <2>;
466 compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
467 reg = <0x020b8000 0x4000>;
468 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
472 wdog1: wdog@020bc000 {
473 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
474 reg = <0x020bc000 0x4000>;
475 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
479 wdog2: wdog@020c0000 {
480 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
481 reg = <0x020c0000 0x4000>;
482 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
488 compatible = "fsl,imx6q-ccm";
489 reg = <0x020c4000 0x4000>;
490 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
491 <0 88 IRQ_TYPE_LEVEL_HIGH>;
495 anatop: anatop@020c8000 {
496 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
497 reg = <0x020c8000 0x1000>;
498 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
499 <0 54 IRQ_TYPE_LEVEL_HIGH>,
500 <0 127 IRQ_TYPE_LEVEL_HIGH>;
503 compatible = "fsl,anatop-regulator";
504 regulator-name = "vdd1p1";
505 regulator-min-microvolt = <800000>;
506 regulator-max-microvolt = <1375000>;
508 anatop-reg-offset = <0x110>;
509 anatop-vol-bit-shift = <8>;
510 anatop-vol-bit-width = <5>;
511 anatop-min-bit-val = <4>;
512 anatop-min-voltage = <800000>;
513 anatop-max-voltage = <1375000>;
517 compatible = "fsl,anatop-regulator";
518 regulator-name = "vdd3p0";
519 regulator-min-microvolt = <2800000>;
520 regulator-max-microvolt = <3150000>;
522 anatop-reg-offset = <0x120>;
523 anatop-vol-bit-shift = <8>;
524 anatop-vol-bit-width = <5>;
525 anatop-min-bit-val = <0>;
526 anatop-min-voltage = <2625000>;
527 anatop-max-voltage = <3400000>;
531 compatible = "fsl,anatop-regulator";
532 regulator-name = "vdd2p5";
533 regulator-min-microvolt = <2000000>;
534 regulator-max-microvolt = <2750000>;
536 anatop-reg-offset = <0x130>;
537 anatop-vol-bit-shift = <8>;
538 anatop-vol-bit-width = <5>;
539 anatop-min-bit-val = <0>;
540 anatop-min-voltage = <2000000>;
541 anatop-max-voltage = <2750000>;
544 reg_arm: regulator-vddcore@140 {
545 compatible = "fsl,anatop-regulator";
546 regulator-name = "vddarm";
547 regulator-min-microvolt = <725000>;
548 regulator-max-microvolt = <1450000>;
550 anatop-reg-offset = <0x140>;
551 anatop-vol-bit-shift = <0>;
552 anatop-vol-bit-width = <5>;
553 anatop-delay-reg-offset = <0x170>;
554 anatop-delay-bit-shift = <24>;
555 anatop-delay-bit-width = <2>;
556 anatop-min-bit-val = <1>;
557 anatop-min-voltage = <725000>;
558 anatop-max-voltage = <1450000>;
561 reg_pu: regulator-vddpu@140 {
562 compatible = "fsl,anatop-regulator";
563 regulator-name = "vddpu";
564 regulator-min-microvolt = <725000>;
565 regulator-max-microvolt = <1450000>;
567 anatop-reg-offset = <0x140>;
568 anatop-vol-bit-shift = <9>;
569 anatop-vol-bit-width = <5>;
570 anatop-delay-reg-offset = <0x170>;
571 anatop-delay-bit-shift = <26>;
572 anatop-delay-bit-width = <2>;
573 anatop-min-bit-val = <1>;
574 anatop-min-voltage = <725000>;
575 anatop-max-voltage = <1450000>;
578 reg_soc: regulator-vddsoc@140 {
579 compatible = "fsl,anatop-regulator";
580 regulator-name = "vddsoc";
581 regulator-min-microvolt = <725000>;
582 regulator-max-microvolt = <1450000>;
584 anatop-reg-offset = <0x140>;
585 anatop-vol-bit-shift = <18>;
586 anatop-vol-bit-width = <5>;
587 anatop-delay-reg-offset = <0x170>;
588 anatop-delay-bit-shift = <28>;
589 anatop-delay-bit-width = <2>;
590 anatop-min-bit-val = <1>;
591 anatop-min-voltage = <725000>;
592 anatop-max-voltage = <1450000>;
597 compatible = "fsl,imx6q-tempmon";
598 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
599 fsl,tempmon = <&anatop>;
600 fsl,tempmon-data = <&ocotp>;
601 clocks = <&clks 172>;
604 usbphy1: usbphy@020c9000 {
605 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
606 reg = <0x020c9000 0x1000>;
607 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
608 clocks = <&clks 182>;
609 fsl,anatop = <&anatop>;
612 usbphy2: usbphy@020ca000 {
613 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
614 reg = <0x020ca000 0x1000>;
615 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
616 clocks = <&clks 183>;
617 fsl,anatop = <&anatop>;
621 compatible = "fsl,sec-v4.0-mon", "simple-bus";
622 #address-cells = <1>;
624 ranges = <0 0x020cc000 0x4000>;
627 compatible = "fsl,sec-v4.0-mon-rtc-lp";
629 interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
630 <0 20 IRQ_TYPE_LEVEL_HIGH>;
634 epit1: epit@020d0000 { /* EPIT1 */
635 reg = <0x020d0000 0x4000>;
636 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
639 epit2: epit@020d4000 { /* EPIT2 */
640 reg = <0x020d4000 0x4000>;
641 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
645 compatible = "fsl,imx6q-src", "fsl,imx51-src";
646 reg = <0x020d8000 0x4000>;
647 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
648 <0 96 IRQ_TYPE_LEVEL_HIGH>;
653 compatible = "fsl,imx6q-gpc";
654 reg = <0x020dc000 0x4000>;
655 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
656 <0 90 IRQ_TYPE_LEVEL_HIGH>;
659 gpr: iomuxc-gpr@020e0000 {
660 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
661 reg = <0x020e0000 0x38>;
664 iomuxc: iomuxc@020e0000 {
665 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
666 reg = <0x020e0000 0x4000>;
670 #address-cells = <1>;
672 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
677 #address-cells = <1>;
685 lvds0_mux_0: endpoint {
686 remote-endpoint = <&ipu1_di0_lvds0>;
693 lvds0_mux_1: endpoint {
694 remote-endpoint = <&ipu1_di1_lvds0>;
700 #address-cells = <1>;
708 lvds1_mux_0: endpoint {
709 remote-endpoint = <&ipu1_di0_lvds1>;
716 lvds1_mux_1: endpoint {
717 remote-endpoint = <&ipu1_di1_lvds1>;
724 #address-cells = <1>;
726 reg = <0x00120000 0x9000>;
727 interrupts = <0 115 0x04>;
729 clocks = <&clks 123>, <&clks 124>;
730 clock-names = "iahb", "isfr";
736 hdmi_mux_0: endpoint {
737 remote-endpoint = <&ipu1_di0_hdmi>;
744 hdmi_mux_1: endpoint {
745 remote-endpoint = <&ipu1_di1_hdmi>;
750 dcic1: dcic@020e4000 {
751 reg = <0x020e4000 0x4000>;
752 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
755 dcic2: dcic@020e8000 {
756 reg = <0x020e8000 0x4000>;
757 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
760 sdma: sdma@020ec000 {
761 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
762 reg = <0x020ec000 0x4000>;
763 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
764 clocks = <&clks 155>, <&clks 155>;
765 clock-names = "ipg", "ahb";
767 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
771 aips-bus@02100000 { /* AIPS2 */
772 compatible = "fsl,aips-bus", "simple-bus";
773 #address-cells = <1>;
775 reg = <0x02100000 0x100000>;
779 reg = <0x02100000 0x40000>;
780 interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
781 <0 106 IRQ_TYPE_LEVEL_HIGH>;
784 aipstz@0217c000 { /* AIPSTZ2 */
785 reg = <0x0217c000 0x4000>;
788 usbotg: usb@02184000 {
789 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
790 reg = <0x02184000 0x200>;
791 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
792 clocks = <&clks 162>;
793 fsl,usbphy = <&usbphy1>;
794 fsl,usbmisc = <&usbmisc 0>;
798 usbh1: usb@02184200 {
799 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
800 reg = <0x02184200 0x200>;
801 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
802 clocks = <&clks 162>;
803 fsl,usbphy = <&usbphy2>;
804 fsl,usbmisc = <&usbmisc 1>;
808 usbh2: usb@02184400 {
809 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
810 reg = <0x02184400 0x200>;
811 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
812 clocks = <&clks 162>;
813 fsl,usbmisc = <&usbmisc 2>;
817 usbh3: usb@02184600 {
818 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
819 reg = <0x02184600 0x200>;
820 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
821 clocks = <&clks 162>;
822 fsl,usbmisc = <&usbmisc 3>;
826 usbmisc: usbmisc@02184800 {
828 compatible = "fsl,imx6q-usbmisc";
829 reg = <0x02184800 0x200>;
830 clocks = <&clks 162>;
833 fec: ethernet@02188000 {
834 compatible = "fsl,imx6q-fec";
835 reg = <0x02188000 0x4000>;
836 interrupts-extended =
837 <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
838 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
839 clocks = <&clks 117>, <&clks 117>, <&clks 190>;
840 clock-names = "ipg", "ahb", "ptp";
845 reg = <0x0218c000 0x4000>;
846 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
847 <0 117 IRQ_TYPE_LEVEL_HIGH>,
848 <0 126 IRQ_TYPE_LEVEL_HIGH>;
851 usdhc1: usdhc@02190000 {
852 compatible = "fsl,imx6q-usdhc";
853 reg = <0x02190000 0x4000>;
854 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
855 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
856 clock-names = "ipg", "ahb", "per";
861 usdhc2: usdhc@02194000 {
862 compatible = "fsl,imx6q-usdhc";
863 reg = <0x02194000 0x4000>;
864 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
865 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
866 clock-names = "ipg", "ahb", "per";
871 usdhc3: usdhc@02198000 {
872 compatible = "fsl,imx6q-usdhc";
873 reg = <0x02198000 0x4000>;
874 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
875 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
876 clock-names = "ipg", "ahb", "per";
881 usdhc4: usdhc@0219c000 {
882 compatible = "fsl,imx6q-usdhc";
883 reg = <0x0219c000 0x4000>;
884 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
885 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
886 clock-names = "ipg", "ahb", "per";
892 #address-cells = <1>;
894 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
895 reg = <0x021a0000 0x4000>;
896 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
897 clocks = <&clks 125>;
902 #address-cells = <1>;
904 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
905 reg = <0x021a4000 0x4000>;
906 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
907 clocks = <&clks 126>;
912 #address-cells = <1>;
914 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
915 reg = <0x021a8000 0x4000>;
916 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
917 clocks = <&clks 127>;
922 reg = <0x021ac000 0x4000>;
925 mmdc0: mmdc@021b0000 { /* MMDC0 */
926 compatible = "fsl,imx6q-mmdc";
927 reg = <0x021b0000 0x4000>;
930 mmdc1: mmdc@021b4000 { /* MMDC1 */
931 reg = <0x021b4000 0x4000>;
934 weim: weim@021b8000 {
935 compatible = "fsl,imx6q-weim";
936 reg = <0x021b8000 0x4000>;
937 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
938 clocks = <&clks 196>;
941 ocotp: ocotp@021bc000 {
942 compatible = "fsl,imx6q-ocotp", "syscon";
943 reg = <0x021bc000 0x4000>;
946 tzasc@021d0000 { /* TZASC1 */
947 reg = <0x021d0000 0x4000>;
948 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
951 tzasc@021d4000 { /* TZASC2 */
952 reg = <0x021d4000 0x4000>;
953 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
956 audmux: audmux@021d8000 {
957 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
958 reg = <0x021d8000 0x4000>;
962 mipi_csi: mipi@021dc000 {
963 reg = <0x021dc000 0x4000>;
966 mipi_dsi: mipi@021e0000 {
967 #address-cells = <1>;
969 reg = <0x021e0000 0x4000>;
975 mipi_mux_0: endpoint {
976 remote-endpoint = <&ipu1_di0_mipi>;
983 mipi_mux_1: endpoint {
984 remote-endpoint = <&ipu1_di1_mipi>;
990 reg = <0x021e4000 0x4000>;
991 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
994 uart2: serial@021e8000 {
995 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
996 reg = <0x021e8000 0x4000>;
997 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
998 clocks = <&clks 160>, <&clks 161>;
999 clock-names = "ipg", "per";
1000 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1001 dma-names = "rx", "tx";
1002 status = "disabled";
1005 uart3: serial@021ec000 {
1006 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1007 reg = <0x021ec000 0x4000>;
1008 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
1009 clocks = <&clks 160>, <&clks 161>;
1010 clock-names = "ipg", "per";
1011 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1012 dma-names = "rx", "tx";
1013 status = "disabled";
1016 uart4: serial@021f0000 {
1017 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1018 reg = <0x021f0000 0x4000>;
1019 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
1020 clocks = <&clks 160>, <&clks 161>;
1021 clock-names = "ipg", "per";
1022 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1023 dma-names = "rx", "tx";
1024 status = "disabled";
1027 uart5: serial@021f4000 {
1028 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1029 reg = <0x021f4000 0x4000>;
1030 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
1031 clocks = <&clks 160>, <&clks 161>;
1032 clock-names = "ipg", "per";
1033 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1034 dma-names = "rx", "tx";
1035 status = "disabled";
1039 ipu1: ipu@02400000 {
1040 #address-cells = <1>;
1042 compatible = "fsl,imx6q-ipu";
1043 reg = <0x02400000 0x400000>;
1044 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
1045 <0 5 IRQ_TYPE_LEVEL_HIGH>;
1046 clocks = <&clks 130>, <&clks 131>, <&clks 132>;
1047 clock-names = "bus", "di0", "di1";
1059 #address-cells = <1>;
1063 ipu1_di0_disp0: endpoint@0 {
1066 ipu1_di0_hdmi: endpoint@1 {
1067 remote-endpoint = <&hdmi_mux_0>;
1070 ipu1_di0_mipi: endpoint@2 {
1071 remote-endpoint = <&mipi_mux_0>;
1074 ipu1_di0_lvds0: endpoint@3 {
1075 remote-endpoint = <&lvds0_mux_0>;
1078 ipu1_di0_lvds1: endpoint@4 {
1079 remote-endpoint = <&lvds1_mux_0>;
1084 #address-cells = <1>;
1088 ipu1_di0_disp1: endpoint@0 {
1091 ipu1_di1_hdmi: endpoint@1 {
1092 remote-endpoint = <&hdmi_mux_1>;
1095 ipu1_di1_mipi: endpoint@2 {
1096 remote-endpoint = <&mipi_mux_1>;
1099 ipu1_di1_lvds0: endpoint@3 {
1100 remote-endpoint = <&lvds0_mux_1>;
1103 ipu1_di1_lvds1: endpoint@4 {
1104 remote-endpoint = <&lvds1_mux_1>;