arch/arm/boot/dts/imx6sx.dtsi

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <dt-bindings/clock/imx6sx-clock.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include "imx6sx-pinfunc.h"
  13 #include "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 can0 = &flexcan1;
  18                 can1 = &flexcan2;
  19                 ethernet0 = &fec1;
  20                 ethernet1 = &fec2;
  21                 gpio0 = &gpio1;
  22                 gpio1 = &gpio2;
  23                 gpio2 = &gpio3;
  24                 gpio3 = &gpio4;
  25                 gpio4 = &gpio5;
  26                 gpio5 = &gpio6;
  27                 gpio6 = &gpio7;
  28                 i2c0 = &i2c1;
  29                 i2c1 = &i2c2;
  30                 i2c2 = &i2c3;
  31                 i2c3 = &i2c4;
  32                 mmc0 = &usdhc1;
  33                 mmc1 = &usdhc2;
  34                 mmc2 = &usdhc3;
  35                 mmc3 = &usdhc4;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 serial4 = &uart5;
  41                 serial5 = &uart6;
  42                 spi0 = &ecspi1;
  43                 spi1 = &ecspi2;
  44                 spi2 = &ecspi3;
  45                 spi3 = &ecspi4;
  46                 spi4 = &ecspi5;
  47                 usbphy0 = &usbphy1;
  48                 usbphy1 = &usbphy2;
  49         };
  50
  51         cpus {
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54
  55                 cpu0: cpu@0 {
  56                         compatible = "arm,cortex-a9";
  57                         device_type = "cpu";
  58                         reg = <0>;
  59                         next-level-cache = <&L2>;
  60                         operating-points = <
  61                                 /* kHz    uV */
  62                                 996000  1250000
  63                                 792000  1175000
  64                                 396000  1075000
  65                         >;
  66                         fsl,soc-operating-points = <
  67                                 /* ARM kHz  SOC uV */
  68                                 996000      1175000
  69                                 792000      1175000
  70                                 396000      1175000
  71                         >;
  72                         clock-latency = <61036>; /* two CLK32 periods */
  73                         clocks = <&clks IMX6SX_CLK_ARM>,
  74                                  <&clks IMX6SX_CLK_PLL2_PFD2>,
  75                                  <&clks IMX6SX_CLK_STEP>,
  76                                  <&clks IMX6SX_CLK_PLL1_SW>,
  77                                  <&clks IMX6SX_CLK_PLL1_SYS>;
  78                         clock-names = "arm", "pll2_pfd2_396m", "step",
  79                                       "pll1_sw", "pll1_sys";
  80                         arm-supply = <&reg_arm>;
  81                         soc-supply = <&reg_soc>;
  82                 };
  83         };
  84
  85         intc: interrupt-controller@00a01000 {
  86                 compatible = "arm,cortex-a9-gic";
  87                 #interrupt-cells = <3>;
  88                 interrupt-controller;
  89                 reg = <0x00a01000 0x1000>,
  90                       <0x00a00100 0x100>;
  91         };
  92
  93         clocks {
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96
  97                 ckil: clock@0 {
  98                         compatible = "fixed-clock";
  99                         reg = <0>;
 100                         #clock-cells = <0>;
 101                         clock-frequency = <32768>;
 102                         clock-output-names = "ckil";
 103                 };
 104
 105                 osc: clock@1 {
 106                         compatible = "fixed-clock";
 107                         reg = <1>;
 108                         #clock-cells = <0>;
 109                         clock-frequency = <24000000>;
 110                         clock-output-names = "osc";
 111                 };
 112
 113                 ipp_di0: clock@2 {
 114                         compatible = "fixed-clock";
 115                         reg = <2>;
 116                         #clock-cells = <0>;
 117                         clock-frequency = <0>;
 118                         clock-output-names = "ipp_di0";
 119                 };
 120
 121                 ipp_di1: clock@3 {
 122                         compatible = "fixed-clock";
 123                         reg = <3>;
 124                         #clock-cells = <0>;
 125                         clock-frequency = <0>;
 126                         clock-output-names = "ipp_di1";
 127                 };
 128         };
 129
 130         soc {
 131                 #address-cells = <1>;
 132                 #size-cells = <1>;
 133                 compatible = "simple-bus";
 134                 interrupt-parent = <&intc>;
 135                 ranges;
 136
 137                 pmu {
 138                         compatible = "arm,cortex-a9-pmu";
 139                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 140                 };
 141
 142                 ocram: sram@00900000 {
 143                         compatible = "mmio-sram";
 144                         reg = <0x00900000 0x20000>;
 145                         clocks = <&clks IMX6SX_CLK_OCRAM>;
 146                 };
 147
 148                 L2: l2-cache@00a02000 {
 149                         compatible = "arm,pl310-cache";
 150                         reg = <0x00a02000 0x1000>;
 151                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 152                         cache-unified;
 153                         cache-level = <2>;
 154                         arm,tag-latency = <4 2 3>;
 155                         arm,data-latency = <4 2 3>;
 156                 };
 157
 158                 dma_apbh: dma-apbh@01804000 {
 159                         compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 160                         reg = <0x01804000 0x2000>;
 161                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 162                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 163                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 164                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 165                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 166                         #dma-cells = <1>;
 167                         dma-channels = <4>;
 168                         clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 169                 };
 170
 171                 gpmi: gpmi-nand@01806000{
 172                         compatible = "fsl,imx6sx-gpmi-nand";
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
 176                         reg-names = "gpmi-nand", "bch";
 177                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 178                         interrupt-names = "bch";
 179                         clocks = <&clks IMX6SX_CLK_GPMI_IO>,
 180                                  <&clks IMX6SX_CLK_GPMI_APB>,
 181                                  <&clks IMX6SX_CLK_GPMI_BCH>,
 182                                  <&clks IMX6SX_CLK_GPMI_BCH_APB>,
 183                                  <&clks IMX6SX_CLK_PER1_BCH>;
 184                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 185                                       "gpmi_bch_apb", "per1_bch";
 186                         dmas = <&dma_apbh 0>;
 187                         dma-names = "rx-tx";
 188                         status = "disabled";
 189                 };
 190
 191                 aips1: aips-bus@02000000 {
 192                         compatible = "fsl,aips-bus", "simple-bus";
 193                         #address-cells = <1>;
 194                         #size-cells = <1>;
 195                         reg = <0x02000000 0x100000>;
 196                         ranges;
 197
 198                         spba-bus@02000000 {
 199                                 compatible = "fsl,spba-bus", "simple-bus";
 200                                 #address-cells = <1>;
 201                                 #size-cells = <1>;
 202                                 reg = <0x02000000 0x40000>;
 203                                 ranges;
 204
 205                                 spdif: spdif@02004000 {
 206                                         compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
 207                                         reg = <0x02004000 0x4000>;
 208                                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 209                                         dmas = <&sdma 14 18 0>,
 210                                                <&sdma 15 18 0>;
 211                                         dma-names = "rx", "tx";
 212                                         clocks = <&clks IMX6SX_CLK_SPDIF>,
 213                                                  <&clks IMX6SX_CLK_OSC>,
 214                                                  <&clks IMX6SX_CLK_SPDIF>,
 215                                                  <&clks 0>, <&clks 0>, <&clks 0>,
 216                                                  <&clks IMX6SX_CLK_IPG>,
 217                                                  <&clks 0>, <&clks 0>,
 218                                                  <&clks IMX6SX_CLK_SPBA>;
 219                                         clock-names = "core", "rxtx0",
 220                                                       "rxtx1", "rxtx2",
 221                                                       "rxtx3", "rxtx4",
 222                                                       "rxtx5", "rxtx6",
 223                                                       "rxtx7", "dma";
 224                                         status = "disabled";
 225                                 };
 226
 227                                 ecspi1: ecspi@02008000 {
 228                                         #address-cells = <1>;
 229                                         #size-cells = <0>;
 230                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 231                                         reg = <0x02008000 0x4000>;
 232                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 233                                         clocks = <&clks IMX6SX_CLK_ECSPI1>,
 234                                                  <&clks IMX6SX_CLK_ECSPI1>;
 235                                         clock-names = "ipg", "per";
 236                                         status = "disabled";
 237                                 };
 238
 239                                 ecspi2: ecspi@0200c000 {
 240                                         #address-cells = <1>;
 241                                         #size-cells = <0>;
 242                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 243                                         reg = <0x0200c000 0x4000>;
 244                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 245                                         clocks = <&clks IMX6SX_CLK_ECSPI2>,
 246                                                  <&clks IMX6SX_CLK_ECSPI2>;
 247                                         clock-names = "ipg", "per";
 248                                         status = "disabled";
 249                                 };
 250
 251                                 ecspi3: ecspi@02010000 {
 252                                         #address-cells = <1>;
 253                                         #size-cells = <0>;
 254                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 255                                         reg = <0x02010000 0x4000>;
 256                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 257                                         clocks = <&clks IMX6SX_CLK_ECSPI3>,
 258                                                  <&clks IMX6SX_CLK_ECSPI3>;
 259                                         clock-names = "ipg", "per";
 260                                         status = "disabled";
 261                                 };
 262
 263                                 ecspi4: ecspi@02014000 {
 264                                         #address-cells = <1>;
 265                                         #size-cells = <0>;
 266                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 267                                         reg = <0x02014000 0x4000>;
 268                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 269                                         clocks = <&clks IMX6SX_CLK_ECSPI4>,
 270                                                  <&clks IMX6SX_CLK_ECSPI4>;
 271                                         clock-names = "ipg", "per";
 272                                         status = "disabled";
 273                                 };
 274
 275                                 uart1: serial@02020000 {
 276                                         compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 277                                         reg = <0x02020000 0x4000>;
 278                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 279                                         clocks = <&clks IMX6SX_CLK_UART_IPG>,
 280                                                  <&clks IMX6SX_CLK_UART_SERIAL>;
 281                                         clock-names = "ipg", "per";
 282                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 283                                         dma-names = "rx", "tx";
 284                                         status = "disabled";
 285                                 };
 286
 287                                 esai: esai@02024000 {
 288                                         reg = <0x02024000 0x4000>;
 289                                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 290                                         clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
 291                                                  <&clks IMX6SX_CLK_ESAI_MEM>,
 292                                                  <&clks IMX6SX_CLK_ESAI_EXTAL>,
 293                                                  <&clks IMX6SX_CLK_ESAI_IPG>,
 294                                                  <&clks IMX6SX_CLK_SPBA>;
 295                                         clock-names = "core", "mem", "extal",
 296                                                       "fsys", "dma";
 297                                         status = "disabled";
 298                                 };
 299
 300                                 ssi1: ssi@02028000 {
 301                                         compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
 302                                         reg = <0x02028000 0x4000>;
 303                                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 304                                         clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
 305                                                  <&clks IMX6SX_CLK_SSI1>;
 306                                         clock-names = "ipg", "baud";
 307                                         dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
 308                                         dma-names = "rx", "tx";
 309                                         status = "disabled";
 310                                 };
 311
 312                                 ssi2: ssi@0202c000 {
 313                                         compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
 314                                         reg = <0x0202c000 0x4000>;
 315                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 316                                         clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
 317                                                  <&clks IMX6SX_CLK_SSI2>;
 318                                         clock-names = "ipg", "baud";
 319                                         dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
 320                                         dma-names = "rx", "tx";
 321                                         status = "disabled";
 322                                 };
 323
 324                                 ssi3: ssi@02030000 {
 325                                         compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
 326                                         reg = <0x02030000 0x4000>;
 327                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 328                                         clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
 329                                                  <&clks IMX6SX_CLK_SSI3>;
 330                                         clock-names = "ipg", "baud";
 331                                         dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
 332                                         dma-names = "rx", "tx";
 333                                         status = "disabled";
 334                                 };
 335
 336                                 asrc: asrc@02034000 {
 337                                         reg = <0x02034000 0x4000>;
 338                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 339                                         clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
 340                                                  <&clks IMX6SX_CLK_ASRC_IPG>,
 341                                                  <&clks IMX6SX_CLK_SPDIF>,
 342                                                  <&clks IMX6SX_CLK_SPBA>;
 343                                         clock-names = "mem", "ipg", "asrck", "dma";
 344                                         dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
 345                                                <&sdma 19 20 1>, <&sdma 20 20 1>,
 346                                                <&sdma 21 20 1>, <&sdma 22 20 1>;
 347                                         dma-names = "rxa", "rxb", "rxc",
 348                                                     "txa", "txb", "txc";
 349                                         status = "okay";
 350                                 };
 351                         };
 352
 353                         pwm1: pwm@02080000 {
 354                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 355                                 reg = <0x02080000 0x4000>;
 356                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 357                                 clocks = <&clks IMX6SX_CLK_PWM1>,
 358                                          <&clks IMX6SX_CLK_PWM1>;
 359                                 clock-names = "ipg", "per";
 360                                 #pwm-cells = <2>;
 361                         };
 362
 363                         pwm2: pwm@02084000 {
 364                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 365                                 reg = <0x02084000 0x4000>;
 366                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 367                                 clocks = <&clks IMX6SX_CLK_PWM2>,
 368                                          <&clks IMX6SX_CLK_PWM2>;
 369                                 clock-names = "ipg", "per";
 370                                 #pwm-cells = <2>;
 371                         };
 372
 373                         pwm3: pwm@02088000 {
 374                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 375                                 reg = <0x02088000 0x4000>;
 376                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 377                                 clocks = <&clks IMX6SX_CLK_PWM3>,
 378                                          <&clks IMX6SX_CLK_PWM3>;
 379                                 clock-names = "ipg", "per";
 380                                 #pwm-cells = <2>;
 381                         };
 382
 383                         pwm4: pwm@0208c000 {
 384                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 385                                 reg = <0x0208c000 0x4000>;
 386                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 387                                 clocks = <&clks IMX6SX_CLK_PWM4>,
 388                                          <&clks IMX6SX_CLK_PWM4>;
 389                                 clock-names = "ipg", "per";
 390                                 #pwm-cells = <2>;
 391                         };
 392
 393                         flexcan1: can@02090000 {
 394                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 395                                 reg = <0x02090000 0x4000>;
 396                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 397                                 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
 398                                          <&clks IMX6SX_CLK_CAN1_SERIAL>;
 399                                 clock-names = "ipg", "per";
 400                                 status = "disabled";
 401                         };
 402
 403                         flexcan2: can@02094000 {
 404                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 405                                 reg = <0x02094000 0x4000>;
 406                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 407                                 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
 408                                          <&clks IMX6SX_CLK_CAN2_SERIAL>;
 409                                 clock-names = "ipg", "per";
 410                                 status = "disabled";
 411                         };
 412
 413                         gpt: gpt@02098000 {
 414                                 compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
 415                                 reg = <0x02098000 0x4000>;
 416                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 417                                 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
 418                                          <&clks IMX6SX_CLK_GPT_SERIAL>;
 419                                 clock-names = "ipg", "per";
 420                         };
 421
 422                         gpio1: gpio@0209c000 {
 423                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 424                                 reg = <0x0209c000 0x4000>;
 425                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 426                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 427                                 gpio-controller;
 428                                 #gpio-cells = <2>;
 429                                 interrupt-controller;
 430                                 #interrupt-cells = <2>;
 431                         };
 432
 433                         gpio2: gpio@020a0000 {
 434                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 435                                 reg = <0x020a0000 0x4000>;
 436                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 437                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 438                                 gpio-controller;
 439                                 #gpio-cells = <2>;
 440                                 interrupt-controller;
 441                                 #interrupt-cells = <2>;
 442                         };
 443
 444                         gpio3: gpio@020a4000 {
 445                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 446                                 reg = <0x020a4000 0x4000>;
 447                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 448                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 449                                 gpio-controller;
 450                                 #gpio-cells = <2>;
 451                                 interrupt-controller;
 452                                 #interrupt-cells = <2>;
 453                         };
 454
 455                         gpio4: gpio@020a8000 {
 456                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 457                                 reg = <0x020a8000 0x4000>;
 458                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 459                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 460                                 gpio-controller;
 461                                 #gpio-cells = <2>;
 462                                 interrupt-controller;
 463                                 #interrupt-cells = <2>;
 464                         };
 465
 466                         gpio5: gpio@020ac000 {
 467                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 468                                 reg = <0x020ac000 0x4000>;
 469                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 470                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 471                                 gpio-controller;
 472                                 #gpio-cells = <2>;
 473                                 interrupt-controller;
 474                                 #interrupt-cells = <2>;
 475                         };
 476
 477                         gpio6: gpio@020b0000 {
 478                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 479                                 reg = <0x020b0000 0x4000>;
 480                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 481                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 482                                 gpio-controller;
 483                                 #gpio-cells = <2>;
 484                                 interrupt-controller;
 485                                 #interrupt-cells = <2>;
 486                         };
 487
 488                         gpio7: gpio@020b4000 {
 489                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 490                                 reg = <0x020b4000 0x4000>;
 491                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 492                                              <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 493                                 gpio-controller;
 494                                 #gpio-cells = <2>;
 495                                 interrupt-controller;
 496                                 #interrupt-cells = <2>;
 497                         };
 498
 499                         kpp: kpp@020b8000 {
 500                                 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 501                                 reg = <0x020b8000 0x4000>;
 502                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 503                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 504                                 status = "disabled";
 505                         };
 506
 507                         wdog1: wdog@020bc000 {
 508                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 509                                 reg = <0x020bc000 0x4000>;
 510                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 511                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 512                         };
 513
 514                         wdog2: wdog@020c0000 {
 515                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 516                                 reg = <0x020c0000 0x4000>;
 517                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 518                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 519                                 status = "disabled";
 520                         };
 521
 522                         clks: ccm@020c4000 {
 523                                 compatible = "fsl,imx6sx-ccm";
 524                                 reg = <0x020c4000 0x4000>;
 525                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 526                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 527                                 #clock-cells = <1>;
 528                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
 529                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 530                         };
 531
 532                         anatop: anatop@020c8000 {
 533                                 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
 534                                              "syscon", "simple-bus";
 535                                 reg = <0x020c8000 0x1000>;
 536                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 537                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 538                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 539
 540                                 regulator-1p1@110 {
 541                                         compatible = "fsl,anatop-regulator";
 542                                         regulator-name = "vdd1p1";
 543                                         regulator-min-microvolt = <800000>;
 544                                         regulator-max-microvolt = <1375000>;
 545                                         regulator-always-on;
 546                                         anatop-reg-offset = <0x110>;
 547                                         anatop-vol-bit-shift = <8>;
 548                                         anatop-vol-bit-width = <5>;
 549                                         anatop-min-bit-val = <4>;
 550                                         anatop-min-voltage = <800000>;
 551                                         anatop-max-voltage = <1375000>;
 552                                 };
 553
 554                                 regulator-3p0@120 {
 555                                         compatible = "fsl,anatop-regulator";
 556                                         regulator-name = "vdd3p0";
 557                                         regulator-min-microvolt = <2800000>;
 558                                         regulator-max-microvolt = <3150000>;
 559                                         regulator-always-on;
 560                                         anatop-reg-offset = <0x120>;
 561                                         anatop-vol-bit-shift = <8>;
 562                                         anatop-vol-bit-width = <5>;
 563                                         anatop-min-bit-val = <0>;
 564                                         anatop-min-voltage = <2625000>;
 565                                         anatop-max-voltage = <3400000>;
 566                                 };
 567
 568                                 regulator-2p5@130 {
 569                                         compatible = "fsl,anatop-regulator";
 570                                         regulator-name = "vdd2p5";
 571                                         regulator-min-microvolt = <2100000>;
 572                                         regulator-max-microvolt = <2875000>;
 573                                         regulator-always-on;
 574                                         anatop-reg-offset = <0x130>;
 575                                         anatop-vol-bit-shift = <8>;
 576                                         anatop-vol-bit-width = <5>;
 577                                         anatop-min-bit-val = <0>;
 578                                         anatop-min-voltage = <2100000>;
 579                                         anatop-max-voltage = <2875000>;
 580                                 };
 581
 582                                 reg_arm: regulator-vddcore@140 {
 583                                         compatible = "fsl,anatop-regulator";
 584                                         regulator-name = "cpu";
 585                                         regulator-min-microvolt = <725000>;
 586                                         regulator-max-microvolt = <1450000>;
 587                                         regulator-always-on;
 588                                         anatop-reg-offset = <0x140>;
 589                                         anatop-vol-bit-shift = <0>;
 590                                         anatop-vol-bit-width = <5>;
 591                                         anatop-delay-reg-offset = <0x170>;
 592                                         anatop-delay-bit-shift = <24>;
 593                                         anatop-delay-bit-width = <2>;
 594                                         anatop-min-bit-val = <1>;
 595                                         anatop-min-voltage = <725000>;
 596                                         anatop-max-voltage = <1450000>;
 597                                 };
 598
 599                                 reg_pcie: regulator-vddpcie@140 {
 600                                         compatible = "fsl,anatop-regulator";
 601                                         regulator-name = "vddpcie";
 602                                         regulator-min-microvolt = <725000>;
 603                                         regulator-max-microvolt = <1450000>;
 604                                         anatop-reg-offset = <0x140>;
 605                                         anatop-vol-bit-shift = <9>;
 606                                         anatop-vol-bit-width = <5>;
 607                                         anatop-delay-reg-offset = <0x170>;
 608                                         anatop-delay-bit-shift = <26>;
 609                                         anatop-delay-bit-width = <2>;
 610                                         anatop-min-bit-val = <1>;
 611                                         anatop-min-voltage = <725000>;
 612                                         anatop-max-voltage = <1450000>;
 613                                 };
 614
 615                                 reg_soc: regulator-vddsoc@140 {
 616                                         compatible = "fsl,anatop-regulator";
 617                                         regulator-name = "vddsoc";
 618                                         regulator-min-microvolt = <725000>;
 619                                         regulator-max-microvolt = <1450000>;
 620                                         regulator-always-on;
 621                                         anatop-reg-offset = <0x140>;
 622                                         anatop-vol-bit-shift = <18>;
 623                                         anatop-vol-bit-width = <5>;
 624                                         anatop-delay-reg-offset = <0x170>;
 625                                         anatop-delay-bit-shift = <28>;
 626                                         anatop-delay-bit-width = <2>;
 627                                         anatop-min-bit-val = <1>;
 628                                         anatop-min-voltage = <725000>;
 629                                         anatop-max-voltage = <1450000>;
 630                                 };
 631                         };
 632
 633                         tempmon: tempmon {
 634                                 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
 635                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 636                                 fsl,tempmon = <&anatop>;
 637                                 fsl,tempmon-data = <&ocotp>;
 638                                 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
 639                         };
 640
 641                         usbphy1: usbphy@020c9000 {
 642                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 643                                 reg = <0x020c9000 0x1000>;
 644                                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 645                                 clocks = <&clks IMX6SX_CLK_USBPHY1>;
 646                                 fsl,anatop = <&anatop>;
 647                         };
 648
 649                         usbphy2: usbphy@020ca000 {
 650                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 651                                 reg = <0x020ca000 0x1000>;
 652                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 653                                 clocks = <&clks IMX6SX_CLK_USBPHY2>;
 654                                 fsl,anatop = <&anatop>;
 655                         };
 656
 657                         snvs: snvs@020cc000 {
 658                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 659                                 #address-cells = <1>;
 660                                 #size-cells = <1>;
 661                                 ranges = <0 0x020cc000 0x4000>;
 662
 663                                 snvs-rtc-lp@34 {
 664                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 665                                         reg = <0x34 0x58>;
 666                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 667                                 };
 668                         };
 669
 670                         epit1: epit@020d0000 {
 671                                 reg = <0x020d0000 0x4000>;
 672                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 673                         };
 674
 675                         epit2: epit@020d4000 {
 676                                 reg = <0x020d4000 0x4000>;
 677                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 678                         };
 679
 680                         src: src@020d8000 {
 681                                 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 682                                 reg = <0x020d8000 0x4000>;
 683                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 684                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 685                                 #reset-cells = <1>;
 686                         };
 687
 688                         gpc: gpc@020dc000 {
 689                                 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
 690                                 reg = <0x020dc000 0x4000>;
 691                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 692                         };
 693
 694                         iomuxc: iomuxc@020e0000 {
 695                                 compatible = "fsl,imx6sx-iomuxc";
 696                                 reg = <0x020e0000 0x4000>;
 697                         };
 698
 699                         gpr: iomuxc-gpr@020e4000 {
 700                                 compatible = "fsl,imx6sx-iomuxc-gpr", "syscon";
 701                                 reg = <0x020e4000 0x4000>;
 702                         };
 703
 704                         sdma: sdma@020ec000 {
 705                                 compatible = "fsl,imx6sx-sdma";
 706                                 reg = <0x020ec000 0x4000>;
 707                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 708                                 clocks = <&clks IMX6SX_CLK_SDMA>,
 709                                          <&clks IMX6SX_CLK_SDMA>;
 710                                 clock-names = "ipg", "ahb";
 711                                 #dma-cells = <3>;
 712                         };
 713                 };
 714
 715                 aips2: aips-bus@02100000 {
 716                         compatible = "fsl,aips-bus", "simple-bus";
 717                         #address-cells = <1>;
 718                         #size-cells = <1>;
 719                         reg = <0x02100000 0x100000>;
 720                         ranges;
 721
 722                         usbotg1: usb@02184000 {
 723                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 724                                 reg = <0x02184000 0x200>;
 725                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 726                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 727                                 fsl,usbphy = <&usbphy1>;
 728                                 fsl,usbmisc = <&usbmisc 0>;
 729                                 fsl,anatop = <&anatop>;
 730                                 status = "disabled";
 731                         };
 732
 733                         usbotg2: usb@02184200 {
 734                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 735                                 reg = <0x02184200 0x200>;
 736                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 737                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 738                                 fsl,usbphy = <&usbphy2>;
 739                                 fsl,usbmisc = <&usbmisc 1>;
 740                                 status = "disabled";
 741                         };
 742
 743                         usbh: usb@02184400 {
 744                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 745                                 reg = <0x02184400 0x200>;
 746                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 747                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 748                                 fsl,usbmisc = <&usbmisc 2>;
 749                                 phy_type = "hsic";
 750                                 fsl,anatop = <&anatop>;
 751                                 status = "disabled";
 752                         };
 753
 754                         usbmisc: usbmisc@02184800 {
 755                                 #index-cells = <1>;
 756                                 compatible = "fsl,imx6sx-usbmisc";
 757                                 reg = <0x02184800 0x200>;
 758                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 759                         };
 760
 761                         fec1: ethernet@02188000 {
 762                                 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 763                                 reg = <0x02188000 0x4000>;
 764                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 765                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 766                                 clocks = <&clks IMX6SX_CLK_ENET>,
 767                                          <&clks IMX6SX_CLK_ENET_AHB>,
 768                                          <&clks IMX6SX_CLK_ENET_PTP>,
 769                                          <&clks IMX6SX_CLK_ENET_REF>,
 770                                          <&clks IMX6SX_CLK_ENET_PTP>;
 771                                 clock-names = "ipg", "ahb", "ptp",
 772                                               "enet_clk_ref", "enet_out";
 773                                 status = "disabled";
 774                         };
 775
 776                         mlb: mlb@0218c000 {
 777                                 reg = <0x0218c000 0x4000>;
 778                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 779                                              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 780                                              <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 781                                 clocks = <&clks IMX6SX_CLK_MLB>;
 782                                 status = "disabled";
 783                         };
 784
 785                         usdhc1: usdhc@02190000 {
 786                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 787                                 reg = <0x02190000 0x4000>;
 788                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 789                                 clocks = <&clks IMX6SX_CLK_USDHC1>,
 790                                          <&clks IMX6SX_CLK_USDHC1>,
 791                                          <&clks IMX6SX_CLK_USDHC1>;
 792                                 clock-names = "ipg", "ahb", "per";
 793                                 bus-width = <4>;
 794                                 status = "disabled";
 795                         };
 796
 797                         usdhc2: usdhc@02194000 {
 798                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 799                                 reg = <0x02194000 0x4000>;
 800                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 801                                 clocks = <&clks IMX6SX_CLK_USDHC2>,
 802                                          <&clks IMX6SX_CLK_USDHC2>,
 803                                          <&clks IMX6SX_CLK_USDHC2>;
 804                                 clock-names = "ipg", "ahb", "per";
 805                                 bus-width = <4>;
 806                                 status = "disabled";
 807                         };
 808
 809                         usdhc3: usdhc@02198000 {
 810                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 811                                 reg = <0x02198000 0x4000>;
 812                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 813                                 clocks = <&clks IMX6SX_CLK_USDHC3>,
 814                                          <&clks IMX6SX_CLK_USDHC3>,
 815                                          <&clks IMX6SX_CLK_USDHC3>;
 816                                 clock-names = "ipg", "ahb", "per";
 817                                 bus-width = <4>;
 818                                 status = "disabled";
 819                         };
 820
 821                         usdhc4: usdhc@0219c000 {
 822                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 823                                 reg = <0x0219c000 0x4000>;
 824                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 825                                 clocks = <&clks IMX6SX_CLK_USDHC4>,
 826                                          <&clks IMX6SX_CLK_USDHC4>,
 827                                          <&clks IMX6SX_CLK_USDHC4>;
 828                                 clock-names = "ipg", "ahb", "per";
 829                                 bus-width = <4>;
 830                                 status = "disabled";
 831                         };
 832
 833                         i2c1: i2c@021a0000 {
 834                                 #address-cells = <1>;
 835                                 #size-cells = <0>;
 836                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 837                                 reg = <0x021a0000 0x4000>;
 838                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 839                                 clocks = <&clks IMX6SX_CLK_I2C1>;
 840                                 status = "disabled";
 841                         };
 842
 843                         i2c2: i2c@021a4000 {
 844                                 #address-cells = <1>;
 845                                 #size-cells = <0>;
 846                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 847                                 reg = <0x021a4000 0x4000>;
 848                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 849                                 clocks = <&clks IMX6SX_CLK_I2C2>;
 850                                 status = "disabled";
 851                         };
 852
 853                         i2c3: i2c@021a8000 {
 854                                 #address-cells = <1>;
 855                                 #size-cells = <0>;
 856                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 857                                 reg = <0x021a8000 0x4000>;
 858                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 859                                 clocks = <&clks IMX6SX_CLK_I2C3>;
 860                                 status = "disabled";
 861                         };
 862
 863                         mmdc: mmdc@021b0000 {
 864                                 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
 865                                 reg = <0x021b0000 0x4000>;
 866                         };
 867
 868                         fec2: ethernet@021b4000 {
 869                                 compatible = "fsl,imx6sx-fec";
 870                                 reg = <0x021b4000 0x4000>;
 871                                 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 872                                              <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 873                                 clocks = <&clks IMX6SX_CLK_ENET>,
 874                                          <&clks IMX6SX_CLK_ENET_AHB>,
 875                                          <&clks IMX6SX_CLK_ENET_PTP>,
 876                                          <&clks IMX6SX_CLK_ENET2_REF_125M>,
 877                                          <&clks IMX6SX_CLK_ENET_PTP>;
 878                                 clock-names = "ipg", "ahb", "ptp",
 879                                               "enet_clk_ref", "enet_out";
 880                                 status = "disabled";
 881                         };
 882
 883                         weim: weim@021b8000 {
 884                                 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
 885                                 reg = <0x021b8000 0x4000>;
 886                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 887                                 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
 888                         };
 889
 890                         ocotp: ocotp@021bc000 {
 891                                 compatible = "fsl,imx6sx-ocotp", "syscon";
 892                                 reg = <0x021bc000 0x4000>;
 893                                 clocks = <&clks IMX6SX_CLK_OCOTP>;
 894                         };
 895
 896                         sai1: sai@021d4000 {
 897                                 compatible = "fsl,imx6sx-sai";
 898                                 reg = <0x021d4000 0x4000>;
 899                                 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 900                                 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
 901                                          <&clks IMX6SX_CLK_SAI1>,
 902                                          <&clks 0>, <&clks 0>;
 903                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 904                                 dma-names = "rx", "tx";
 905                                 dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
 906                                 dma-source = <&gpr 0 15 0 16>;
 907                                 status = "disabled";
 908                         };
 909
 910                         audmux: audmux@021d8000 {
 911                                 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
 912                                 reg = <0x021d8000 0x4000>;
 913                                 status = "disabled";
 914                         };
 915
 916                         sai2: sai@021dc000 {
 917                                 compatible = "fsl,imx6sx-sai";
 918                                 reg = <0x021dc000 0x4000>;
 919                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 920                                 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
 921                                          <&clks IMX6SX_CLK_SAI2>,
 922                                          <&clks 0>, <&clks 0>;
 923                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 924                                 dma-names = "rx", "tx";
 925                                 dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
 926                                 dma-source = <&gpr 0 17 0 18>;
 927                                 status = "disabled";
 928                         };
 929
 930                         qspi1: qspi@021e0000 {
 931                                 #address-cells = <1>;
 932                                 #size-cells = <0>;
 933                                 compatible = "fsl,imx6sx-qspi";
 934                                 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 935                                 reg-names = "QuadSPI", "QuadSPI-memory";
 936                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 937                                 clocks = <&clks IMX6SX_CLK_QSPI1>,
 938                                          <&clks IMX6SX_CLK_QSPI1>;
 939                                 clock-names = "qspi_en", "qspi";
 940                                 status = "disabled";
 941                         };
 942
 943                         qspi2: qspi@021e4000 {
 944                                 #address-cells = <1>;
 945                                 #size-cells = <0>;
 946                                 compatible = "fsl,imx6sx-qspi";
 947                                 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
 948                                 reg-names = "QuadSPI", "QuadSPI-memory";
 949                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 950                                 clocks = <&clks IMX6SX_CLK_QSPI2>,
 951                                          <&clks IMX6SX_CLK_QSPI2>;
 952                                 clock-names = "qspi_en", "qspi";
 953                                 status = "disabled";
 954                         };
 955
 956                         uart2: serial@021e8000 {
 957                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 958                                 reg = <0x021e8000 0x4000>;
 959                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 960                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 961                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 962                                 clock-names = "ipg", "per";
 963                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 964                                 dma-names = "rx", "tx";
 965                                 status = "disabled";
 966                         };
 967
 968                         uart3: serial@021ec000 {
 969                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 970                                 reg = <0x021ec000 0x4000>;
 971                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 972                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 973                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 974                                 clock-names = "ipg", "per";
 975                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 976                                 dma-names = "rx", "tx";
 977                                 status = "disabled";
 978                         };
 979
 980                         uart4: serial@021f0000 {
 981                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 982                                 reg = <0x021f0000 0x4000>;
 983                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 984                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 985                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 986                                 clock-names = "ipg", "per";
 987                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 988                                 dma-names = "rx", "tx";
 989                                 status = "disabled";
 990                         };
 991
 992                         uart5: serial@021f4000 {
 993                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 994                                 reg = <0x021f4000 0x4000>;
 995                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 996                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 997                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 998                                 clock-names = "ipg", "per";
 999                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1000                                 dma-names = "rx", "tx";
1001                                 status = "disabled";
1002                         };
1003
1004                         i2c4: i2c@021f8000 {
1005                                 #address-cells = <1>;
1006                                 #size-cells = <0>;
1007                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1008                                 reg = <0x021f8000 0x4000>;
1009                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1010                                 clocks = <&clks IMX6SX_CLK_I2C4>;
1011                                 status = "disabled";
1012                         };
1013                 };
1014
1015                 aips3: aips-bus@02200000 {
1016                         compatible = "fsl,aips-bus", "simple-bus";
1017                         #address-cells = <1>;
1018                         #size-cells = <1>;
1019                         reg = <0x02200000 0x100000>;
1020                         ranges;
1021
1022                         spba-bus@02200000 {
1023                                 compatible = "fsl,spba-bus", "simple-bus";
1024                                 #address-cells = <1>;
1025                                 #size-cells = <1>;
1026                                 reg = <0x02240000 0x40000>;
1027                                 ranges;
1028
1029                                 csi1: csi@02214000 {
1030                                         reg = <0x02214000 0x4000>;
1031                                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1032                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1033                                                  <&clks IMX6SX_CLK_CSI>,
1034                                                  <&clks IMX6SX_CLK_DCIC1>;
1035                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1036                                         status = "disabled";
1037                                 };
1038
1039                                 pxp: pxp@02218000 {
1040                                         reg = <0x02218000 0x4000>;
1041                                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1042                                         clocks = <&clks IMX6SX_CLK_PXP_AXI>,
1043                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1044                                         clock-names = "pxp-axi", "disp-axi";
1045                                         status = "disabled";
1046                                 };
1047
1048                                 csi2: csi@0221c000 {
1049                                         reg = <0x0221c000 0x4000>;
1050                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1051                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1052                                                  <&clks IMX6SX_CLK_CSI>,
1053                                                  <&clks IMX6SX_CLK_DCIC2>;
1054                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1055                                         status = "disabled";
1056                                 };
1057
1058                                 lcdif1: lcdif@02220000 {
1059                                         reg = <0x02220000 0x4000>;
1060                                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1061                                         clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1062                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1063                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1064                                         clock-names = "pix", "axi", "disp_axi";
1065                                         status = "disabled";
1066                                 };
1067
1068                                 lcdif2: lcdif@02224000 {
1069                                         reg = <0x02224000 0x4000>;
1070                                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1071                                         clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1072                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1073                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1074                                         clock-names = "pix", "axi", "disp_axi";
1075                                         status = "disabled";
1076                                 };
1077
1078                                 vadc: vadc@02228000 {
1079                                         reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1080                                         reg-names = "vadc-vafe", "vadc-vdec";
1081                                         clocks = <&clks IMX6SX_CLK_VADC>,
1082                                                  <&clks IMX6SX_CLK_CSI>;
1083                                         clock-names = "vadc", "csi";
1084                                         status = "disabled";
1085                                 };
1086                         };
1087
1088                         adc1: adc@02280000 {
1089                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1090                                 reg = <0x02280000 0x4000>;
1091                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1092                                 clocks = <&clks IMX6SX_CLK_IPG>;
1093                                 clock-names = "adc";
1094                                 status = "disabled";
1095                         };
1096
1097                         adc2: adc@02284000 {
1098                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1099                                 reg = <0x02284000 0x4000>;
1100                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1101                                 clocks = <&clks IMX6SX_CLK_IPG>;
1102                                 clock-names = "adc";
1103                                 status = "disabled";
1104                         };
1105
1106                         wdog3: wdog@02288000 {
1107                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1108                                 reg = <0x02288000 0x4000>;
1109                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1110                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
1111                                 status = "disabled";
1112                         };
1113
1114                         ecspi5: ecspi@0228c000 {
1115                                 #address-cells = <1>;
1116                                 #size-cells = <0>;
1117                                 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1118                                 reg = <0x0228c000 0x4000>;
1119                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1120                                 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1121                                          <&clks IMX6SX_CLK_ECSPI5>;
1122                                 clock-names = "ipg", "per";
1123                                 status = "disabled";
1124                         };
1125
1126                         uart6: serial@022a0000 {
1127                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1128                                 reg = <0x022a0000 0x4000>;
1129                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1130                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1131                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1132                                 clock-names = "ipg", "per";
1133                                 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1134                                 dma-names = "rx", "tx";
1135                                 status = "disabled";
1136                         };
1137
1138                         pwm5: pwm@022a4000 {
1139                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1140                                 reg = <0x022a4000 0x4000>;
1141                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1142                                 clocks = <&clks IMX6SX_CLK_PWM5>,
1143                                          <&clks IMX6SX_CLK_PWM5>;
1144                                 clock-names = "ipg", "per";
1145                                 #pwm-cells = <2>;
1146                         };
1147
1148                         pwm6: pwm@022a8000 {
1149                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1150                                 reg = <0x022a8000 0x4000>;
1151                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1152                                 clocks = <&clks IMX6SX_CLK_PWM6>,
1153                                          <&clks IMX6SX_CLK_PWM6>;
1154                                 clock-names = "ipg", "per";
1155                                 #pwm-cells = <2>;
1156                         };
1157
1158                         pwm7: pwm@022ac000 {
1159                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1160                                 reg = <0x022ac000 0x4000>;
1161                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1162                                 clocks = <&clks IMX6SX_CLK_PWM7>,
1163                                          <&clks IMX6SX_CLK_PWM7>;
1164                                 clock-names = "ipg", "per";
1165                                 #pwm-cells = <2>;
1166                         };
1167
1168                         pwm8: pwm@0022b0000 {
1169                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1170                                 reg = <0x0022b0000 0x4000>;
1171                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1172                                 clocks = <&clks IMX6SX_CLK_PWM8>,
1173                                          <&clks IMX6SX_CLK_PWM8>;
1174                                 clock-names = "ipg", "per";
1175                                 #pwm-cells = <2>;
1176                         };
1177                 };
1178
1179                 pcie: pcie@0x08000000 {
1180                         compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1181                         reg = <0x08ffc000 0x4000>; /* DBI */
1182                         #address-cells = <3>;
1183                         #size-cells = <2>;
1184                         device_type = "pci";
1185                                   /* configuration space */
1186                         ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
1187                                   /* downstream I/O */
1188                                   0x81000000 0 0          0x08f80000 0 0x00010000
1189                                   /* non-prefetchable memory */
1190                                   0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
1191                         num-lanes = <1>;
1192                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1193                         clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
1194                                  <&clks IMX6SX_CLK_PCIE_AXI>,
1195                                  <&clks IMX6SX_CLK_LVDS1_OUT>,
1196                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1197                         clock-names = "pcie_ref_125m", "pcie_axi",
1198                                       "lvds_gate", "display_axi";
1199                         status = "disabled";
1200                 };
1201         };
1202 };