2 * Copyright 2015 Freescale Semiconductor, Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
9 #include <dt-bindings/clock/imx6ul-clock.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include "imx6ul-pinfunc.h"
14 #include "skeleton.dtsi"
52 compatible = "arm,cortex-a7";
55 clock-latency = <61036>; /* two CLK32 periods */
62 fsl,soc-operating-points = <
68 clocks = <&clks IMX6UL_CLK_ARM>,
69 <&clks IMX6UL_CLK_PLL2_BUS>,
70 <&clks IMX6UL_CLK_PLL2_PFD2>,
71 <&clks IMX6UL_CA7_SECONDARY_SEL>,
72 <&clks IMX6UL_CLK_STEP>,
73 <&clks IMX6UL_CLK_PLL1_SW>,
74 <&clks IMX6UL_CLK_PLL1_SYS>,
75 <&clks IMX6UL_PLL1_BYPASS>,
76 <&clks IMX6UL_CLK_PLL1>,
77 <&clks IMX6UL_PLL1_BYPASS_SRC>,
78 <&clks IMX6UL_CLK_OSC>;
79 clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
80 "secondary_sel", "step", "pll1_sw",
81 "pll1_sys", "pll1_bypass", "pll1",
82 "pll1_bypass_src", "osc";
83 arm-supply = <®_arm>;
84 soc-supply = <®_soc>;
88 intc: interrupt-controller@00a01000 {
89 compatible = "arm,cortex-a7-gic";
90 #interrupt-cells = <3>;
92 reg = <0x00a01000 0x1000>,
99 compatible = "fixed-clock";
101 clock-frequency = <32768>;
102 clock-output-names = "ckil";
106 compatible = "fixed-clock";
108 clock-frequency = <24000000>;
109 clock-output-names = "osc";
113 compatible = "fixed-clock";
115 clock-frequency = <0>;
116 clock-output-names = "ipp_di0";
120 compatible = "fixed-clock";
122 clock-frequency = <0>;
123 clock-output-names = "ipp_di1";
127 #address-cells = <1>;
129 compatible = "simple-bus";
130 interrupt-parent = <&gpc>;
134 compatible = "arm,cortex-a7-pmu";
135 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
139 ocram: sram@00900000 {
140 compatible = "mmio-sram";
141 reg = <0x00900000 0x20000>;
144 aips1: aips-bus@02000000 {
145 compatible = "fsl,aips-bus", "simple-bus";
146 #address-cells = <1>;
148 reg = <0x02000000 0x100000>;
152 compatible = "fsl,spba-bus", "simple-bus";
153 #address-cells = <1>;
155 reg = <0x02000000 0x40000>;
158 ecspi1: ecspi@02008000 {
159 #address-cells = <1>;
161 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
162 reg = <0x02008000 0x4000>;
163 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
164 clocks = <&clks IMX6UL_CLK_ECSPI1>,
165 <&clks IMX6UL_CLK_ECSPI1>;
166 clock-names = "ipg", "per";
170 ecspi2: ecspi@0200c000 {
171 #address-cells = <1>;
173 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
174 reg = <0x0200c000 0x4000>;
175 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
176 clocks = <&clks IMX6UL_CLK_ECSPI2>,
177 <&clks IMX6UL_CLK_ECSPI2>;
178 clock-names = "ipg", "per";
182 ecspi3: ecspi@02010000 {
183 #address-cells = <1>;
185 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
186 reg = <0x02010000 0x4000>;
187 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
188 clocks = <&clks IMX6UL_CLK_ECSPI3>,
189 <&clks IMX6UL_CLK_ECSPI3>;
190 clock-names = "ipg", "per";
194 ecspi4: ecspi@02014000 {
195 #address-cells = <1>;
197 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
198 reg = <0x02014000 0x4000>;
199 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
200 clocks = <&clks IMX6UL_CLK_ECSPI4>,
201 <&clks IMX6UL_CLK_ECSPI4>;
202 clock-names = "ipg", "per";
206 uart7: serial@02018000 {
207 compatible = "fsl,imx6ul-uart",
209 reg = <0x02018000 0x4000>;
210 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
211 clocks = <&clks IMX6UL_CLK_UART7_IPG>,
212 <&clks IMX6UL_CLK_UART7_SERIAL>;
213 clock-names = "ipg", "per";
217 uart1: serial@02020000 {
218 compatible = "fsl,imx6ul-uart",
220 reg = <0x02020000 0x4000>;
221 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
222 clocks = <&clks IMX6UL_CLK_UART1_IPG>,
223 <&clks IMX6UL_CLK_UART1_SERIAL>;
224 clock-names = "ipg", "per";
228 uart8: serial@02024000 {
229 compatible = "fsl,imx6ul-uart",
231 reg = <0x02024000 0x4000>;
232 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
233 clocks = <&clks IMX6UL_CLK_UART8_IPG>,
234 <&clks IMX6UL_CLK_UART8_SERIAL>;
235 clock-names = "ipg", "per";
241 compatible = "fsl,imx6ul-tsc";
242 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
243 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
244 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
245 clocks = <&clks IMX6UL_CLK_IPG>,
246 <&clks IMX6UL_CLK_ADC2>;
247 clock-names = "tsc", "adc";
252 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
253 reg = <0x02098000 0x4000>;
254 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
255 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
256 <&clks IMX6UL_CLK_GPT1_SERIAL>;
257 clock-names = "ipg", "per";
260 gpio1: gpio@0209c000 {
261 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
262 reg = <0x0209c000 0x4000>;
263 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
264 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
267 interrupt-controller;
268 #interrupt-cells = <2>;
271 gpio2: gpio@020a0000 {
272 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
273 reg = <0x020a0000 0x4000>;
274 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
275 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
278 interrupt-controller;
279 #interrupt-cells = <2>;
282 gpio3: gpio@020a4000 {
283 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
284 reg = <0x020a4000 0x4000>;
285 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
286 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
289 interrupt-controller;
290 #interrupt-cells = <2>;
293 gpio4: gpio@020a8000 {
294 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
295 reg = <0x020a8000 0x4000>;
296 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
297 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
300 interrupt-controller;
301 #interrupt-cells = <2>;
304 gpio5: gpio@020ac000 {
305 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
306 reg = <0x020ac000 0x4000>;
307 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
308 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
311 interrupt-controller;
312 #interrupt-cells = <2>;
315 fec2: ethernet@020b4000 {
316 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
317 reg = <0x020b4000 0x4000>;
318 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
319 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
320 clocks = <&clks IMX6UL_CLK_ENET>,
321 <&clks IMX6UL_CLK_ENET_AHB>,
322 <&clks IMX6UL_CLK_ENET_PTP>,
323 <&clks IMX6UL_CLK_ENET2_REF_125M>,
324 <&clks IMX6UL_CLK_ENET2_REF_125M>;
325 clock-names = "ipg", "ahb", "ptp",
326 "enet_clk_ref", "enet_out";
327 fsl,num-tx-queues=<1>;
328 fsl,num-rx-queues=<1>;
332 wdog1: wdog@020bc000 {
333 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
334 reg = <0x020bc000 0x4000>;
335 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
336 clocks = <&clks IMX6UL_CLK_WDOG1>;
339 wdog2: wdog@020c0000 {
340 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
341 reg = <0x020c0000 0x4000>;
342 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
343 clocks = <&clks IMX6UL_CLK_WDOG2>;
348 compatible = "fsl,imx6ul-ccm";
349 reg = <0x020c4000 0x4000>;
350 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
351 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
353 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
354 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
357 anatop: anatop@020c8000 {
358 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
359 "syscon", "simple-bus";
360 reg = <0x020c8000 0x1000>;
361 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
362 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
363 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
365 reg_3p0: regulator-3p0@120 {
366 compatible = "fsl,anatop-regulator";
367 regulator-name = "vdd3p0";
368 regulator-min-microvolt = <2625000>;
369 regulator-max-microvolt = <3400000>;
370 anatop-reg-offset = <0x120>;
371 anatop-vol-bit-shift = <8>;
372 anatop-vol-bit-width = <5>;
373 anatop-min-bit-val = <0>;
374 anatop-min-voltage = <2625000>;
375 anatop-max-voltage = <3400000>;
376 anatop-enable-bit = <0>;
379 reg_arm: regulator-vddcore@140 {
380 compatible = "fsl,anatop-regulator";
381 regulator-name = "cpu";
382 regulator-min-microvolt = <725000>;
383 regulator-max-microvolt = <1450000>;
385 anatop-reg-offset = <0x140>;
386 anatop-vol-bit-shift = <0>;
387 anatop-vol-bit-width = <5>;
388 anatop-delay-reg-offset = <0x170>;
389 anatop-delay-bit-shift = <24>;
390 anatop-delay-bit-width = <2>;
391 anatop-min-bit-val = <1>;
392 anatop-min-voltage = <725000>;
393 anatop-max-voltage = <1450000>;
396 reg_soc: regulator-vddsoc@140 {
397 compatible = "fsl,anatop-regulator";
398 regulator-name = "vddsoc";
399 regulator-min-microvolt = <725000>;
400 regulator-max-microvolt = <1450000>;
402 anatop-reg-offset = <0x140>;
403 anatop-vol-bit-shift = <18>;
404 anatop-vol-bit-width = <5>;
405 anatop-delay-reg-offset = <0x170>;
406 anatop-delay-bit-shift = <28>;
407 anatop-delay-bit-width = <2>;
408 anatop-min-bit-val = <1>;
409 anatop-min-voltage = <725000>;
410 anatop-max-voltage = <1450000>;
414 usbphy1: usbphy@020c9000 {
415 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
416 reg = <0x020c9000 0x1000>;
417 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
418 clocks = <&clks IMX6UL_CLK_USBPHY1>;
419 phy-3p0-supply = <®_3p0>;
420 fsl,anatop = <&anatop>;
423 usbphy2: usbphy@020ca000 {
424 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
425 reg = <0x020ca000 0x1000>;
426 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
427 clocks = <&clks IMX6UL_CLK_USBPHY2>;
428 phy-3p0-supply = <®_3p0>;
429 fsl,anatop = <&anatop>;
432 snvs: snvs@020cc000 {
433 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
434 reg = <0x020cc000 0x4000>;
436 snvs_rtc: snvs-rtc-lp {
437 compatible = "fsl,sec-v4.0-mon-rtc-lp";
440 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
441 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
444 snvs_poweroff: snvs-poweroff {
445 compatible = "syscon-poweroff";
452 snvs_pwrkey: snvs-powerkey {
453 compatible = "fsl,sec-v4.0-pwrkey";
455 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
456 linux,keycode = <KEY_POWER>;
461 epit1: epit@020d0000 {
462 reg = <0x020d0000 0x4000>;
463 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
466 epit2: epit@020d4000 {
467 reg = <0x020d4000 0x4000>;
468 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
472 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
473 reg = <0x020d8000 0x4000>;
474 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
475 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
480 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
481 reg = <0x020dc000 0x4000>;
482 interrupt-controller;
483 #interrupt-cells = <3>;
484 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
485 interrupt-parent = <&intc>;
488 iomuxc: iomuxc@020e0000 {
489 compatible = "fsl,imx6ul-iomuxc";
490 reg = <0x020e0000 0x4000>;
493 gpr: iomuxc-gpr@020e4000 {
494 compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
495 reg = <0x020e4000 0x4000>;
499 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
500 reg = <0x020e8000 0x4000>;
501 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
502 clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
503 <&clks IMX6UL_CLK_GPT2_SERIAL>;
504 clock-names = "ipg", "per";
508 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
509 reg = <0x020f0000 0x4000>;
510 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
511 clocks = <&clks IMX6UL_CLK_PWM5>,
512 <&clks IMX6UL_CLK_PWM5>;
513 clock-names = "ipg", "per";
518 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
519 reg = <0x020f4000 0x4000>;
520 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
521 clocks = <&clks IMX6UL_CLK_PWM6>,
522 <&clks IMX6UL_CLK_PWM6>;
523 clock-names = "ipg", "per";
528 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
529 reg = <0x020f8000 0x4000>;
530 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
531 clocks = <&clks IMX6UL_CLK_PWM7>,
532 <&clks IMX6UL_CLK_PWM7>;
533 clock-names = "ipg", "per";
538 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
539 reg = <0x020fc000 0x4000>;
540 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
541 clocks = <&clks IMX6UL_CLK_PWM8>,
542 <&clks IMX6UL_CLK_PWM8>;
543 clock-names = "ipg", "per";
548 aips2: aips-bus@02100000 {
549 compatible = "fsl,aips-bus", "simple-bus";
550 #address-cells = <1>;
552 reg = <0x02100000 0x100000>;
555 usbotg1: usb@02184000 {
556 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
557 reg = <0x02184000 0x200>;
558 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
559 clocks = <&clks IMX6UL_CLK_USBOH3>;
560 fsl,usbphy = <&usbphy1>;
561 fsl,usbmisc = <&usbmisc 0>;
562 fsl,anatop = <&anatop>;
563 ahb-burst-config = <0x0>;
564 tx-burst-size-dword = <0x10>;
565 rx-burst-size-dword = <0x10>;
569 usbotg2: usb@02184200 {
570 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
571 reg = <0x02184200 0x200>;
572 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
573 clocks = <&clks IMX6UL_CLK_USBOH3>;
574 fsl,usbphy = <&usbphy2>;
575 fsl,usbmisc = <&usbmisc 1>;
576 ahb-burst-config = <0x0>;
577 tx-burst-size-dword = <0x10>;
578 rx-burst-size-dword = <0x10>;
582 usbmisc: usbmisc@02184800 {
584 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
585 reg = <0x02184800 0x200>;
588 fec1: ethernet@02188000 {
589 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
590 reg = <0x02188000 0x4000>;
591 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
593 clocks = <&clks IMX6UL_CLK_ENET>,
594 <&clks IMX6UL_CLK_ENET_AHB>,
595 <&clks IMX6UL_CLK_ENET_PTP>,
596 <&clks IMX6UL_CLK_ENET_REF>,
597 <&clks IMX6UL_CLK_ENET_REF>;
598 clock-names = "ipg", "ahb", "ptp",
599 "enet_clk_ref", "enet_out";
600 fsl,num-tx-queues=<1>;
601 fsl,num-rx-queues=<1>;
605 usdhc1: usdhc@02190000 {
606 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
607 reg = <0x02190000 0x4000>;
608 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
609 clocks = <&clks IMX6UL_CLK_USDHC1>,
610 <&clks IMX6UL_CLK_USDHC1>,
611 <&clks IMX6UL_CLK_USDHC1>;
612 clock-names = "ipg", "ahb", "per";
617 usdhc2: usdhc@02194000 {
618 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
619 reg = <0x02194000 0x4000>;
620 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
621 clocks = <&clks IMX6UL_CLK_USDHC2>,
622 <&clks IMX6UL_CLK_USDHC2>,
623 <&clks IMX6UL_CLK_USDHC2>;
624 clock-names = "ipg", "ahb", "per";
630 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
631 reg = <0x02198000 0x4000>;
632 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
633 clocks = <&clks IMX6UL_CLK_ADC1>;
636 fsl,adck-max-frequency = <30000000>, <40000000>,
642 #address-cells = <1>;
644 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
645 reg = <0x021a0000 0x4000>;
646 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
647 clocks = <&clks IMX6UL_CLK_I2C1>;
652 #address-cells = <1>;
654 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
655 reg = <0x021a4000 0x4000>;
656 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
657 clocks = <&clks IMX6UL_CLK_I2C2>;
662 #address-cells = <1>;
664 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
665 reg = <0x021a8000 0x4000>;
666 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
667 clocks = <&clks IMX6UL_CLK_I2C3>;
671 mmdc: mmdc@021b0000 {
672 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
673 reg = <0x021b0000 0x4000>;
676 qspi: qspi@021e0000 {
677 #address-cells = <1>;
679 compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
680 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
681 reg-names = "QuadSPI", "QuadSPI-memory";
682 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
683 clocks = <&clks IMX6UL_CLK_QSPI>,
684 <&clks IMX6UL_CLK_QSPI>;
685 clock-names = "qspi_en", "qspi";
689 uart2: serial@021e8000 {
690 compatible = "fsl,imx6ul-uart",
692 reg = <0x021e8000 0x4000>;
693 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
694 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
695 <&clks IMX6UL_CLK_UART2_SERIAL>;
696 clock-names = "ipg", "per";
700 uart3: serial@021ec000 {
701 compatible = "fsl,imx6ul-uart",
703 reg = <0x021ec000 0x4000>;
704 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
705 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
706 <&clks IMX6UL_CLK_UART3_SERIAL>;
707 clock-names = "ipg", "per";
711 uart4: serial@021f0000 {
712 compatible = "fsl,imx6ul-uart",
714 reg = <0x021f0000 0x4000>;
715 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
716 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
717 <&clks IMX6UL_CLK_UART4_SERIAL>;
718 clock-names = "ipg", "per";
722 uart5: serial@021f4000 {
723 compatible = "fsl,imx6ul-uart",
725 reg = <0x021f4000 0x4000>;
726 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
727 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
728 <&clks IMX6UL_CLK_UART5_SERIAL>;
729 clock-names = "ipg", "per";
734 #address-cells = <1>;
736 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
737 reg = <0x021f8000 0x4000>;
738 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
739 clocks = <&clks IMX6UL_CLK_I2C4>;
743 uart6: serial@021fc000 {
744 compatible = "fsl,imx6ul-uart",
746 reg = <0x021fc000 0x4000>;
747 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
748 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
749 <&clks IMX6UL_CLK_UART6_SERIAL>;
750 clock-names = "ipg", "per";