arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

   1 /*
   2  * This program is free software; you can redistribute it and/or modify
   3  * it under the terms of the GNU General Public License version 2 as
   4  * published by the Free Software Foundation.
   5  */
   6
   7 /dts-v1/;
   8
   9 #include "omap36xx.dtsi"
  10 #include "logicpd-torpedo-som.dtsi"
  11 #include "omap-gpmc-smsc9221.dtsi"
  12
  13 / {
  14         model = "LogicPD Zoom DM3730 Torpedo Development Kit";
  15         compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
  16
  17         gpio_keys {
  18                 compatible = "gpio-keys";
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
  21
  22                 sysboot2 {
  23                         label = "sysboot2";
  24                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;     /* gpio2 */
  25                         linux,code = <BTN_0>;
  26                         gpio-key,wakeup;
  27                 };
  28
  29                 sysboot5 {
  30                         label = "sysboot5";
  31                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;     /* gpio7 */
  32                         linux,code = <BTN_1>;
  33                         gpio-key,wakeup;
  34                 };
  35
  36                 gpio1 {
  37                         label = "gpio1";
  38                         gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;    /* gpio181 */
  39                         linux,code = <BTN_2>;
  40                         gpio-key,wakeup;
  41                 };
  42
  43                 gpio2 {
  44                         label = "gpio2";
  45                         gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;    /* gpio178 */
  46                         linux,code = <BTN_3>;
  47                         gpio-key,wakeup;
  48                 };
  49         };
  50
  51         sound {
  52                 compatible = "ti,omap-twl4030";
  53                 ti,model = "omap3logic";
  54                 ti,mcbsp = <&mcbsp2>;
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59                 pinctrl-names = "default";
  60                 pinctrl-0 = <&led_pins>;
  61
  62                 led1 {
  63                         label = "led1";
  64                         gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;   /* gpio180 */
  65                         linux,default-trigger = "cpu0";
  66                 };
  67
  68                 led2 {
  69                         label = "led2";
  70                         gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;   /* gpio179 */
  71                         linux,default-trigger = "none";
  72                 };
  73         };
  74 };
  75
  76 &vaux1 {
  77         regulator-min-microvolt = <3000000>;
  78         regulator-max-microvolt = <3000000>;
  79 };
  80
  81 &vaux4 {
  82         regulator-min-microvolt = <1800000>;
  83         regulator-max-microvolt = <1800000>;
  84 };
  85
  86 &vaux1 {
  87         regulator-min-microvolt = <3000000>;
  88         regulator-max-microvolt = <3000000>;
  89 };
  90
  91 &vaux4 {
  92         regulator-min-microvolt = <1800000>;
  93         regulator-max-microvolt = <1800000>;
  94 };
  95
  96 &mcbsp2 {
  97         status = "okay";
  98 };
  99
 100 &charger {
 101         ti,bb-uvolt = <3200000>;
 102         ti,bb-uamp = <150>;
 103 };
 104
 105 &gpmc {
 106         ranges = <1 0 0x08000000 0x1000000>;    /* CS1: 16MB for LAN9221 */
 107
 108         ethernet@gpmc {
 109                 pinctrl-names = "default";
 110                 pinctrl-0 = <&lan9221_pins>;
 111                 interrupt-parent = <&gpio5>;
 112                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;            /* gpio129 */
 113                 reg = <1 0 0xff>;
 114         };
 115 };
 116
 117 &mmc1 {
 118         interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 119         pinctrl-names = "default";
 120         pinctrl-0 = <&mmc1_pins &mmc1_cd>;
 121         cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;              /* gpio127 */
 122         vmmc-supply = <&vmmc1>;
 123         bus-width = <4>;
 124         cap-power-off-card;
 125 };
 126
 127 &omap3_pmx_core {
 128         gpio_key_pins: pinmux_gpio_key_pins {
 129                 pinctrl-single,pins = <
 130                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
 131                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
 132                 >;
 133         };
 134
 135         led_pins: pinmux_led_pins {
 136                 pinctrl-single,pins = <
 137                         OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)       /* gpio_179 */
 138                         OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)       /* gpio_180 */
 139                 >;
 140         };
 141
 142         mmc1_pins: pinmux_mmc1_pins {
 143                 pinctrl-single,pins = <
 144                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)       /* sdmmc1_clk.sdmmc1_clk */
 145                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
 146                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat0.sdmmc1_dat0 */
 147                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
 148                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
 149                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
 150                 >;
 151         };
 152 };
 153
 154 &omap3_pmx_wkup {
 155         gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
 156                 pinctrl-single,pins = <
 157                         OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot0.gpio_2 */
 158                         OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot5.gpio_7 */
 159                 >;
 160         };
 161
 162         lan9221_pins: pinmux_lan9221_pins {
 163                 pinctrl-single,pins = <
 164                         OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)         /* reserved.gpio_129 */
 165                 >;
 166         };
 167
 168         mmc1_cd: pinmux_mmc1_cd {
 169                 pinctrl-single,pins = <
 170                         OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)  /* reserved.gpio_127 */
 171                 >;
 172         };
 173 };
 174
 175 &uart1 {
 176         interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 177 };
 178
 179 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 180 &usb_otg_hs {
 181         interface-type = <0>;
 182         usb-phy = <&usb2_phy>;
 183         phys = <&usb2_phy>;
 184         phy-names = "usb2-phy";
 185         mode = <3>;
 186         power = <50>;
 187 };