1 #include "omap2420.dtsi"
5 device_type = "memory";
6 reg = <0x80000000 0x8000000>; /* 128 MB */
11 compatible = "i2c-cbus-gpio";
12 gpios = <&gpio3 2 0 /* gpio66 clk */
13 &gpio3 1 0 /* gpio65 dat */
14 &gpio3 0 0 /* gpio64 sel */
19 compatible = "retu-mfd";
20 interrupt-parent = <&gpio4>;
21 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
29 clock-frequency = <400000>;
33 clock-frequency = <400000>;
37 ranges = <0 0 0x04000000 0x10000000>;
39 /* gpio-irq for dma: 26 */
44 reg = <0 0 0x10000000>;
47 gpmc,burst-length = <16>;
50 gpmc,device-width = <2>;
51 gpmc,mux-add-data = <2>;
53 gpmc,cs-rd-off-ns = <127>;
54 gpmc,cs-wr-off-ns = <109>;
56 gpmc,adv-rd-off-ns = <18>;
57 gpmc,adv-wr-off-ns = <18>;
59 gpmc,oe-off-ns = <127>;
61 gpmc,we-off-ns = <72>;
62 gpmc,rd-cycle-ns = <145>;
63 gpmc,wr-cycle-ns = <136>;
64 gpmc,access-ns = <118>;
65 gpmc,page-burst-access-ns = <27>;
66 gpmc,bus-turnaround-ns = <0>;
67 gpmc,cycle2cycle-delay-ns = <0>;
68 gpmc,wait-monitoring-ns = <0>;
69 gpmc,clk-activation-ns = <9>;
70 gpmc,sync-clk-ps = <27000>;
72 /* MTD partition table corresponding to old board-n8x0 file. */
75 reg = <0x00000000 0x00020000>;
80 reg = <0x00020000 0x00060000>;
84 reg = <0x00080000 0x00200000>;
88 reg = <0x00280000 0x00400000>;
92 reg = <0x00680000 0x0f980000>;
95 label = "omap2-onenand";
96 reg = <0x00000000 0x10000000>;