2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap34xx.dtsi"
13 model = "TI OMAP3 BeagleBoard";
14 compatible = "ti,omap3-beagle", "ti,omap3";
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
33 compatible = "gpio-leds";
35 label = "beagleboard::pmu_stat";
36 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
40 label = "beagleboard::usr0";
41 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
42 linux,default-trigger = "heartbeat";
46 label = "beagleboard::usr1";
47 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
48 linux,default-trigger = "mmc0";
52 /* HS USB Port 2 Power */
53 hsusb2_power: hsusb2_power_reg {
54 compatible = "regulator-fixed";
55 regulator-name = "hsusb2_vbus";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
59 startup-delay-us = <70000>;
62 /* HS USB Host PHY on PORT 2 */
63 hsusb2_phy: hsusb2_phy {
64 compatible = "usb-nop-xceiv";
65 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
66 vcc-supply = <&hsusb2_power>;
70 compatible = "ti,omap-twl4030";
71 ti,model = "omap3beagle";
74 ti,codec = <&twl_audio>;
78 compatible = "gpio-keys";
82 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
90 compatible = "ti,tfp410";
91 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
93 pinctrl-names = "default";
94 pinctrl-0 = <&tfp410_pins>;
103 tfp410_in: endpoint@0 {
104 remote-endpoint = <&dpi_out>;
111 tfp410_out: endpoint@0 {
112 remote-endpoint = <&dvi_connector_in>;
119 compatible = "dvi-connector";
124 ddc-i2c-bus = <&i2c3>;
127 dvi_connector_in: endpoint {
128 remote-endpoint = <&tfp410_out>;
134 compatible = "svideo-connector";
138 tv_connector_in: endpoint {
139 remote-endpoint = <&venc_out>;
146 gpio1_pins: pinmux_gpio1_pins {
147 pinctrl-single,pins = <
148 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
154 pinctrl-names = "default";
159 hsusb2_pins: pinmux_hsusb2_pins {
160 pinctrl-single,pins = <
161 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
162 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
163 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
164 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
165 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
166 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
170 uart3_pins: pinmux_uart3_pins {
171 pinctrl-single,pins = <
172 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
173 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
177 tfp410_pins: pinmux_tfp410_pins {
178 pinctrl-single,pins = <
179 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
183 dss_dpi_pins: pinmux_dss_dpi_pins {
184 pinctrl-single,pins = <
185 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
186 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
187 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
188 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
189 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
190 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
191 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
192 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
193 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
194 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
195 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
196 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
197 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
198 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
199 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
200 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
201 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
202 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
203 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
204 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
205 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
206 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
207 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
208 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
209 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
210 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
211 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
212 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
218 pinctrl-names = "default";
223 hsusb2_2_pins: pinmux_hsusb2_2_pins {
224 pinctrl-single,pins = <
225 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
226 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
227 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
228 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
229 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
230 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
236 clock-frequency = <2600000>;
240 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
241 interrupt-parent = <&intc>;
244 compatible = "ti,twl4030-audio";
251 #include "twl4030.dtsi"
252 #include "twl4030_omap3.dtsi"
255 clock-frequency = <100000>;
259 vmmc-supply = <&vmmc1>;
260 vmmc_aux-supply = <&vsim>;
273 port2-mode = "ehci-phy";
277 phys = <0 &hsusb2_phy>;
282 /* pullups: BIT(1) */
283 ti,pullups = <0x000002>;
286 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
287 * BIT(15), BIT(16), BIT(17)
289 ti,pulldowns = <0x03a1c4>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&uart3_pins>;
295 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
299 pinctrl-names = "default";
300 pinctrl-0 = <&gpio1_pins>;
304 interface-type = <0>;
305 usb-phy = <&usb2_phy>;
307 phy-names = "usb2-phy";
313 regulator-name = "vdd_ehci";
314 regulator-min-microvolt = <1800000>;
315 regulator-max-microvolt = <1800000>;
323 /* Needed to power the DPI pins */
331 pinctrl-names = "default";
332 pinctrl-0 = <&dss_dpi_pins>;
336 remote-endpoint = <&tfp410_in>;
345 vdda-supply = <&vdac>;
349 remote-endpoint = <&tv_connector_in>;