2 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
4 * Based on omap3-beagle-xm.dts
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include "omap36xx.dtsi"
15 model = "OMAP3 GTA04";
16 compatible = "ti,omap3-gta04", "ti,omap3";
25 device_type = "memory";
26 reg = <0x80000000 0x20000000>; /* 512 MB */
30 compatible = "gpio-keys";
35 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
42 uart1_pins: pinmux_uart1_pins {
43 pinctrl-single,pins = <
44 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
45 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
49 uart2_pins: pinmux_uart2_pins {
50 pinctrl-single,pins = <
51 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
52 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
56 uart3_pins: pinmux_uart3_pins {
57 pinctrl-single,pins = <
58 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
59 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
63 mmc1_pins: pinmux_mmc1_pins {
64 pinctrl-single,pins = <
65 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
66 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
67 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
68 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
69 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
70 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
76 clock-frequency = <2600000>;
80 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
81 interrupt-parent = <&intc>;
85 #include "twl4030.dtsi"
86 #include "twl4030_omap3.dtsi"
89 clock-frequency = <400000>;
93 compatible = "bosch,bmp085";
99 compatible = "ti,tca6507";
100 #address-cells = <1>;
104 gta04_led0: red_aux@0 {
105 label = "gta04:red:aux";
109 gta04_led1: green_aux@1 {
110 label = "gta04:green:aux";
114 gta04_led3: red_power@3 {
115 label = "gta04:red:power";
117 linux,default-trigger = "default-on";
120 gta04_led4: green_power@4 {
121 label = "gta04:green:power";
128 clock-frequency = <100000>;
132 interface-type = <0>;
133 usb-phy = <&usb2_phy>;
135 phy-names = "usb2-phy";
141 pinctrl-names = "default";
142 pinctrl-0 = <&mmc1_pins>;
143 vmmc-supply = <&vmmc1>;
144 vmmc_aux-supply = <&vsim>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&uart1_pins>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&uart2_pins>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&uart3_pins>;