2 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
3 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 (or later) as
7 * published by the Free Software Foundation.
12 #include "omap34xx.dtsi"
13 #include <dt-bindings/input/input.h>
16 * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
17 * for omap AES HW crypto support. When linux kernel try to access memory of AES
18 * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
19 * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
20 * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
21 * There is "unofficial" version of bootloader which enables AES in L3 firewall
22 * but it is not widely used and to prevent kernel crash rather AES is disabled.
23 * There is also no runtime detection code if AES is disabled in L3 firewall...
31 compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
47 compatible = "gpio-leds";
49 label = "debug::sleep";
50 gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
51 linux,default-trigger = "default-on";
52 pinctrl-names = "default";
53 pinctrl-0 = <&debug_leds>;
58 device_type = "memory";
59 reg = <0x80000000 0x10000000>; /* 256 MB */
63 compatible = "gpio-keys";
66 label = "Camera Lens Cover";
67 gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
68 linux,input-type = <5>; /* EV_SW */
69 linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
74 label = "Camera Focus";
75 gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
76 linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
81 label = "Camera Capture";
82 gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
83 linux,code = <0xd4>; /* KEY_CAMERA */
88 label = "Lock Button";
89 gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
90 linux,code = <0x98>; /* KEY_SCREENLOCK */
95 label = "Keypad Slide";
96 gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
97 linux,input-type = <5>; /* EV_SW */
98 linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
103 label = "Proximity Sensor";
104 gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
105 linux,input-type = <5>; /* EV_SW */
106 linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
111 compatible = "nxp,isp1704";
112 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
113 usb-phy = <&usb2_phy>;
117 compatible = "composite-video-connector";
121 tv_connector_in: endpoint {
122 remote-endpoint = <&venc_out>;
128 compatible = "nokia,n900-audio";
130 nokia,cpu-dai = <&mcbsp2>;
131 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
132 nokia,headphone-amplifier = <&tpa6130a2>;
134 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
135 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
136 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
137 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
140 battery: n900-battery {
141 compatible = "nokia,n900-battery";
142 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
143 io-channel-names = "temp", "bsi", "vbat";
148 pinctrl-names = "default";
150 uart2_pins: pinmux_uart2_pins {
151 pinctrl-single,pins = <
152 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
153 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
157 uart3_pins: pinmux_uart3_pins {
158 pinctrl-single,pins = <
159 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
160 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
164 ethernet_pins: pinmux_ethernet_pins {
165 pinctrl-single,pins = <
166 OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
167 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
168 OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
172 gpmc_pins: pinmux_gpmc_pins {
173 pinctrl-single,pins = <
176 OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
177 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
178 OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
180 /* data lines, gpmc_d0..d7 not muxable according to TRM */
181 OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
182 OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
183 OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
184 OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
185 OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
186 OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
187 OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
188 OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
191 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
192 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
194 OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
195 OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
199 i2c1_pins: pinmux_i2c1_pins {
200 pinctrl-single,pins = <
201 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
202 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
206 i2c2_pins: pinmux_i2c2_pins {
207 pinctrl-single,pins = <
208 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
209 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
213 i2c3_pins: pinmux_i2c3_pins {
214 pinctrl-single,pins = <
215 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
216 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
220 debug_leds: pinmux_debug_led_pins {
221 pinctrl-single,pins = <
222 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
226 mcspi4_pins: pinmux_mcspi4_pins {
227 pinctrl-single,pins = <
228 OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
229 OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
230 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
231 OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
235 mmc1_pins: pinmux_mmc1_pins {
236 pinctrl-single,pins = <
237 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
238 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
239 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
240 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
241 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
242 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
246 mmc2_pins: pinmux_mmc2_pins {
247 pinctrl-single,pins = <
248 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
249 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
250 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
251 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
252 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
253 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
254 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
255 OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
256 OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
257 OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
261 acx565akm_pins: pinmux_acx565akm_pins {
262 pinctrl-single,pins = <
263 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
267 dss_sdi_pins: pinmux_dss_sdi_pins {
268 pinctrl-single,pins = <
269 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
270 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
271 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
272 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
274 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
275 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
279 wl1251_pins: pinmux_wl1251 {
280 pinctrl-single,pins = <
281 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
282 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
286 ssi_pins: pinmux_ssi {
287 pinctrl-single,pins = <
288 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
289 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
290 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
291 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
292 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
293 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
294 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
295 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
299 modem_pins: pinmux_modem {
300 pinctrl-single,pins = <
301 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
302 OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
303 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
304 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
305 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
306 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
312 pinctrl-names = "default";
313 pinctrl-0 = <&i2c1_pins>;
315 clock-frequency = <2200000>;
319 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
320 interrupt-parent = <&intc>;
324 #include "twl4030.dtsi"
325 #include "twl4030_omap3.dtsi"
328 regulator-name = "V28";
329 regulator-min-microvolt = <2800000>;
330 regulator-max-microvolt = <2800000>;
331 regulator-always-on; /* due to battery cover sensor */
335 regulator-name = "VCSI";
336 regulator-min-microvolt = <1800000>;
337 regulator-max-microvolt = <1800000>;
341 regulator-name = "VMMC2_30";
342 regulator-min-microvolt = <2800000>;
343 regulator-max-microvolt = <3000000>;
347 regulator-name = "VCAM_ANA_28";
348 regulator-min-microvolt = <2800000>;
349 regulator-max-microvolt = <2800000>;
353 regulator-name = "VMMC1";
354 regulator-min-microvolt = <1850000>;
355 regulator-max-microvolt = <3150000>;
359 regulator-name = "V28_A";
360 regulator-min-microvolt = <2800000>;
361 regulator-max-microvolt = <3000000>;
362 regulator-always-on; /* due VIO leak to AIC34 VDDs */
366 regulator-name = "VPLL";
367 regulator-min-microvolt = <1800000>;
368 regulator-max-microvolt = <1800000>;
373 regulator-name = "VSDI_CSI";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
380 regulator-name = "VMMC2_IO_18";
381 regulator-min-microvolt = <1800000>;
382 regulator-max-microvolt = <1800000>;
386 regulator-name = "VIO";
387 regulator-min-microvolt = <1800000>;
388 regulator-max-microvolt = <1800000>;
392 regulator-name = "VINTANA1";
393 /* fixed to 1500000 */
398 regulator-name = "VINTANA2";
399 regulator-min-microvolt = <2750000>;
400 regulator-max-microvolt = <2750000>;
405 regulator-name = "VINTDIG";
406 /* fixed to 1500000 */
412 compatible = "ti,twl4030-audio";
413 ti,enable-vibra = <1>;
417 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
423 linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
424 MATRIX_KEY(0x00, 0x01, KEY_O)
425 MATRIX_KEY(0x00, 0x02, KEY_P)
426 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
427 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
428 MATRIX_KEY(0x00, 0x06, KEY_A)
429 MATRIX_KEY(0x00, 0x07, KEY_S)
431 MATRIX_KEY(0x01, 0x00, KEY_W)
432 MATRIX_KEY(0x01, 0x01, KEY_D)
433 MATRIX_KEY(0x01, 0x02, KEY_F)
434 MATRIX_KEY(0x01, 0x03, KEY_G)
435 MATRIX_KEY(0x01, 0x04, KEY_H)
436 MATRIX_KEY(0x01, 0x05, KEY_J)
437 MATRIX_KEY(0x01, 0x06, KEY_K)
438 MATRIX_KEY(0x01, 0x07, KEY_L)
440 MATRIX_KEY(0x02, 0x00, KEY_E)
441 MATRIX_KEY(0x02, 0x01, KEY_DOT)
442 MATRIX_KEY(0x02, 0x02, KEY_UP)
443 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
444 MATRIX_KEY(0x02, 0x05, KEY_Z)
445 MATRIX_KEY(0x02, 0x06, KEY_X)
446 MATRIX_KEY(0x02, 0x07, KEY_C)
447 MATRIX_KEY(0x02, 0x08, KEY_F9)
449 MATRIX_KEY(0x03, 0x00, KEY_R)
450 MATRIX_KEY(0x03, 0x01, KEY_V)
451 MATRIX_KEY(0x03, 0x02, KEY_B)
452 MATRIX_KEY(0x03, 0x03, KEY_N)
453 MATRIX_KEY(0x03, 0x04, KEY_M)
454 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
455 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
456 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
458 MATRIX_KEY(0x04, 0x00, KEY_T)
459 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
460 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
461 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
462 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
463 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
464 MATRIX_KEY(0x04, 0x08, KEY_F10)
466 MATRIX_KEY(0x05, 0x00, KEY_Y)
467 MATRIX_KEY(0x05, 0x08, KEY_F11)
469 MATRIX_KEY(0x06, 0x00, KEY_U)
471 MATRIX_KEY(0x07, 0x00, KEY_I)
472 MATRIX_KEY(0x07, 0x01, KEY_F7)
473 MATRIX_KEY(0x07, 0x02, KEY_F8)
479 ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
483 pinctrl-names = "default";
484 pinctrl-0 = <&i2c2_pins>;
486 clock-frequency = <100000>;
488 tlv320aic3x: tlv320aic3x@18 {
489 compatible = "ti,tlv320aic3x";
491 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
493 0 /* AIC3X_GPIO1_FUNC_DISABLED */
494 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
497 AVDD-supply = <&vmmc2>;
498 DRVDD-supply = <&vmmc2>;
499 IOVDD-supply = <&vio>;
500 DVDD-supply = <&vio>;
502 ai3x-micbias-vg = <1>;
505 tlv320aic3x_aux: tlv320aic3x@19 {
506 compatible = "ti,tlv320aic3x";
508 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
510 AVDD-supply = <&vmmc2>;
511 DRVDD-supply = <&vmmc2>;
512 IOVDD-supply = <&vio>;
513 DVDD-supply = <&vio>;
515 ai3x-micbias-vg = <2>;
518 tsl2563: tsl2563@29 {
519 compatible = "amstaos,tsl2563";
522 amstaos,cover-comp-gain = <16>;
525 adp1653: led-controller@30 {
526 compatible = "adi,adp1653";
528 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
531 flash-timeout-us = <500000>;
532 flash-max-microamp = <320000>;
533 led-max-microamp = <50000>;
536 led-max-microamp = <17500>;
541 compatible = "national,lp5523";
543 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
544 enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
547 chan-name = "lp5523:kb1";
548 led-cur = /bits/ 8 <50>;
549 max-cur = /bits/ 8 <100>;
553 chan-name = "lp5523:kb2";
554 led-cur = /bits/ 8 <50>;
555 max-cur = /bits/ 8 <100>;
559 chan-name = "lp5523:kb3";
560 led-cur = /bits/ 8 <50>;
561 max-cur = /bits/ 8 <100>;
565 chan-name = "lp5523:kb4";
566 led-cur = /bits/ 8 <50>;
567 max-cur = /bits/ 8 <100>;
571 chan-name = "lp5523:b";
572 led-cur = /bits/ 8 <50>;
573 max-cur = /bits/ 8 <100>;
577 chan-name = "lp5523:g";
578 led-cur = /bits/ 8 <50>;
579 max-cur = /bits/ 8 <100>;
583 chan-name = "lp5523:r";
584 led-cur = /bits/ 8 <50>;
585 max-cur = /bits/ 8 <100>;
589 chan-name = "lp5523:kb5";
590 led-cur = /bits/ 8 <50>;
591 max-cur = /bits/ 8 <100>;
595 chan-name = "lp5523:kb6";
596 led-cur = /bits/ 8 <50>;
597 max-cur = /bits/ 8 <100>;
601 bq27200: bq27200@55 {
602 compatible = "ti,bq27200";
606 tpa6130a2: tpa6130a2@60 {
607 compatible = "ti,tpa6130a2";
610 Vdd-supply = <&vmmc2>;
612 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
616 compatible = "silabs,si4713";
619 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
620 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
622 vdd-supply = <&vaux1>;
625 bq24150a: bq24150a@6b {
626 compatible = "ti,bq24150a";
629 ti,current-limit = <100>;
630 ti,weak-battery-voltage = <3400>;
631 ti,battery-regulation-voltage = <4200>;
632 ti,charge-current = <650>;
633 ti,termination-current = <100>;
634 ti,resistor-sense = <68>;
636 ti,usb-charger-detection = <&isp1704>;
641 pinctrl-names = "default";
642 pinctrl-0 = <&i2c3_pins>;
644 clock-frequency = <400000>;
646 lis302dl: lis3lv02d@1d {
647 compatible = "st,lis3lv02d";
650 Vdd-supply = <&vaux1>;
651 Vdd_IO-supply = <&vio>;
653 interrupt-parent = <&gpio6>;
654 interrupts = <21 20>; /* 181 and 180 */
661 /* Limits are 0.5g * value */
662 st,click-threshold-x = <8>;
663 st,click-threshold-y = <8>;
664 st,click-threshold-z = <10>;
666 /* Click must be longer than time limit */
667 st,click-time-limit = <9>;
669 /* Kind of debounce filter */
670 st,click-latency = <50>;
672 /* Interrupt line 2 for click detection */
677 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
680 st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
685 st,axis-x = <1>; /* LIS3_DEV_X */
686 st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
687 st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
689 st,min-limit-x = <(-32)>;
690 st,min-limit-y = <3>;
691 st,min-limit-z = <3>;
693 st,max-limit-x = <(-3)>;
694 st,max-limit-y = <32>;
695 st,max-limit-z = <32>;
700 pinctrl-names = "default";
701 pinctrl-0 = <&mmc1_pins>;
702 vmmc-supply = <&vmmc1>;
704 cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
707 /* most boards use vaux3, only some old versions use vmmc2 instead */
709 pinctrl-names = "default";
710 pinctrl-0 = <&mmc2_pins>;
711 vmmc-supply = <&vaux3>;
712 vmmc_aux-supply = <&vsim>;
722 ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
723 <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
724 pinctrl-names = "default";
725 pinctrl-0 = <&gpmc_pins>;
727 /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
729 #address-cells = <1>;
731 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
735 gpmc,burst-length = <16>;
739 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
740 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
742 gpmc,cs-rd-off-ns = <87>;
743 gpmc,cs-wr-off-ns = <87>;
744 gpmc,adv-on-ns = <0>;
745 gpmc,adv-rd-off-ns = <10>;
746 gpmc,adv-wr-off-ns = <10>;
747 gpmc,oe-on-ns = <15>;
748 gpmc,oe-off-ns = <87>;
750 gpmc,we-off-ns = <87>;
751 gpmc,rd-cycle-ns = <112>;
752 gpmc,wr-cycle-ns = <112>;
753 gpmc,access-ns = <81>;
754 gpmc,page-burst-access-ns = <15>;
755 gpmc,bus-turnaround-ns = <0>;
756 gpmc,cycle2cycle-delay-ns = <0>;
757 gpmc,wait-monitoring-ns = <0>;
758 gpmc,clk-activation-ns = <5>;
759 gpmc,wr-data-mux-bus-ns = <30>;
760 gpmc,wr-access-ns = <81>;
761 gpmc,sync-clk-ps = <15000>;
764 * MTD partition table corresponding to Nokia's
765 * Maemo 5 (Fremantle) release.
768 label = "bootloader";
769 reg = <0x00000000 0x00020000>;
774 reg = <0x00020000 0x00060000>;
778 reg = <0x00080000 0x00040000>;
782 reg = <0x000c0000 0x00200000>;
786 reg = <0x002c0000 0x00200000>;
790 reg = <0x004c0000 0x0fb40000>;
794 /* Ethernet is on some early development boards and qemu */
796 compatible = "smsc,lan91c94";
797 interrupt-parent = <&gpio2>;
798 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
799 reg = <1 0 0xf>; /* 16 byte IO range */
801 pinctrl-names = "default";
802 pinctrl-0 = <ðernet_pins>;
803 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
804 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
805 gpmc,device-width = <2>;
806 gpmc,sync-clk-ps = <0>;
808 gpmc,cs-rd-off-ns = <48>;
809 gpmc,cs-wr-off-ns = <24>;
810 gpmc,adv-on-ns = <0>;
811 gpmc,adv-rd-off-ns = <0>;
812 gpmc,adv-wr-off-ns = <0>;
813 gpmc,we-on-ns = <12>;
814 gpmc,we-off-ns = <18>;
815 gpmc,oe-on-ns = <12>;
816 gpmc,oe-off-ns = <48>;
817 gpmc,page-burst-access-ns = <0>;
818 gpmc,access-ns = <42>;
819 gpmc,rd-cycle-ns = <180>;
820 gpmc,wr-cycle-ns = <180>;
821 gpmc,bus-turnaround-ns = <0>;
822 gpmc,cycle2cycle-delay-ns = <0>;
823 gpmc,wait-monitoring-ns = <0>;
824 gpmc,clk-activation-ns = <0>;
825 gpmc,wr-access-ns = <0>;
826 gpmc,wr-data-mux-bus-ns = <12>;
832 * For some reason, touchscreen is necessary for screen to work at
833 * all on real hw. It works well without it on emulator.
835 * Also... order in the device tree actually matters here.
838 compatible = "ti,tsc2005";
839 spi-max-frequency = <6000000>;
844 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
845 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
847 touchscreen-fuzz-x = <4>;
848 touchscreen-fuzz-y = <7>;
849 touchscreen-fuzz-pressure = <2>;
850 touchscreen-size-x = <4096>;
851 touchscreen-size-y = <4096>;
852 touchscreen-max-pressure = <2048>;
854 ti,x-plate-ohms = <280>;
855 ti,esd-recovery-timeout-ms = <8000>;
859 compatible = "sony,acx565akm";
860 spi-max-frequency = <6000000>;
863 pinctrl-names = "default";
864 pinctrl-0 = <&acx565akm_pins>;
867 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
871 remote-endpoint = <&sdi_out>;
878 pinctrl-names = "default";
879 pinctrl-0 = <&mcspi4_pins>;
882 pinctrl-names = "default";
883 pinctrl-0 = <&wl1251_pins>;
887 compatible = "ti,wl1251";
889 spi-max-frequency = <48000000>;
894 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
896 interrupt-parent = <&gpio2>;
897 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
902 interface-type = <0>;
903 usb-phy = <&usb2_phy>;
905 phy-names = "usb2-phy";
915 interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
916 pinctrl-names = "default";
917 pinctrl-0 = <&uart2_pins>;
921 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
922 pinctrl-names = "default";
923 pinctrl-0 = <&uart3_pins>;
929 pinctrl-names = "default";
930 pinctrl-0 = <&dss_sdi_pins>;
932 vdds_sdi-supply = <&vaux1>;
935 #address-cells = <1>;
942 remote-endpoint = <&lcd_in>;
952 vdda-supply = <&vdac>;
956 remote-endpoint = <&tv_connector_in>;
967 pinctrl-names = "default";
968 pinctrl-0 = <&ssi_pins>;
970 ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
973 compatible = "nokia,n900-modem";
975 pinctrl-names = "default";
976 pinctrl-0 = <&modem_pins>;
978 hsi-channel-ids = <0>, <1>, <2>, <3>;
979 hsi-channel-names = "mcsaab-control",
983 hsi-speed-kbps = <55000>;
985 hsi-flow = "synchronized";
986 hsi-arb-mode = "round-robin";
988 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
990 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
991 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
992 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
993 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
994 <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
995 gpio-names = "cmt_apeslpx",
1004 status = "disabled";