2 * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
4 * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include "omap36xx.dtsi"
21 device_type = "memory";
22 reg = <0x80000000 0x40000000>; /* 1 GB */
25 vemmc: fixedregulator@0 {
26 compatible = "regulator-fixed";
27 regulator-name = "VEMMC";
28 regulator-min-microvolt = <2900000>;
29 regulator-max-microvolt = <2900000>;
30 gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
31 startup-delay-us = <150>;
35 vwlan_fixed: fixedregulator@2 {
36 compatible = "regulator-fixed";
37 regulator-name = "VWLAN";
38 gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
45 mmc2_pins: pinmux_mmc2_pins {
46 pinctrl-single,pins = <
47 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
48 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
49 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
50 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
51 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
52 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
56 wlan_pins: pinmux_wlan_pins {
57 pinctrl-single,pins = <
58 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
59 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
65 clock-frequency = <2900000>;
69 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
70 interrupt-parent = <&intc>;
74 /include/ "twl4030.dtsi"
77 compatible = "ti,twl5031";
80 compatible = "ti,twl4030-power";
86 ti,pullups = <0x000001>; /* BIT(0) */
87 ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
92 regulator-name = "vaux2";
93 regulator-min-microvolt = <1800000>;
94 regulator-max-microvolt = <1800000>;
99 regulator-name = "vaux3";
100 regulator-min-microvolt = <2800000>;
101 regulator-max-microvolt = <2800000>;
105 clock-frequency = <400000>;
109 clock-frequency = <400000>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&mmc2_pins>;
119 vmmc-supply = <&vemmc>;
129 interface-type = <0>;
130 usb-phy = <&usb2_phy>;
132 phy-names = "usb2-phy";
138 ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
141 #address-cells = <1>;
143 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
147 gpmc,burst-length = <16>;
151 gpmc,device-width = <2>;
152 gpmc,mux-add-data = <2>;
154 gpmc,cs-rd-off-ns = <87>;
155 gpmc,cs-wr-off-ns = <87>;
156 gpmc,adv-on-ns = <0>;
157 gpmc,adv-rd-off-ns = <10>;
158 gpmc,adv-wr-off-ns = <10>;
159 gpmc,oe-on-ns = <15>;
160 gpmc,oe-off-ns = <87>;
162 gpmc,we-off-ns = <87>;
163 gpmc,rd-cycle-ns = <112>;
164 gpmc,wr-cycle-ns = <112>;
165 gpmc,access-ns = <81>;
166 gpmc,page-burst-access-ns = <15>;
167 gpmc,bus-turnaround-ns = <0>;
168 gpmc,cycle2cycle-delay-ns = <0>;
169 gpmc,wait-monitoring-ns = <0>;
170 gpmc,clk-activation-ns = <5>;
171 gpmc,wr-data-mux-bus-ns = <30>;
172 gpmc,wr-access-ns = <81>;
173 gpmc,sync-clk-ps = <15000>;
176 * MTD partition table corresponding to Nokia's MeeGo 1.2
180 label = "bootloader";
181 reg = <0x00000000 0x00100000>;
185 reg = <0x00100000 0x002c0000>;
189 reg = <0x003c0000 0x01000000>;
193 reg = <0x013c0000 0x00200000>;
197 reg = <0x015c0000 0x1ca40000>;
201 reg = <0x1e000000 0x02000000>;
204 label = "omap2-onenand";
205 reg = <0x00000000 0x20000000>;