2 * Device Tree Source for the Porter board
4 * Copyright (C) 2015 Cogent Embedded, Inc.
6 * This file is licensed under the terms of the GNU General Public License
7 * version 2. This program is licensed "as is" without any warranty of any
8 * kind, whether express or implied.
17 * This command is required before playback/capture:
19 * amixer set "LINEOUT Mixer DACL" on
23 #include "r8a7791.dtsi"
24 #include <dt-bindings/gpio/gpio.h>
28 compatible = "renesas,porter", "renesas,r8a7791";
35 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
36 stdout-path = "serial0:115200n8";
40 device_type = "memory";
41 reg = <0 0x40000000 0 0x40000000>;
45 device_type = "memory";
46 reg = <2 0x00000000 0 0x40000000>;
49 vcc_sdhi0: regulator@0 {
50 compatible = "regulator-fixed";
52 regulator-name = "SDHI0 Vcc";
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
58 vccq_sdhi0: regulator@1 {
59 compatible = "regulator-gpio";
61 regulator-name = "SDHI0 VccQ";
62 regulator-min-microvolt = <1800000>;
63 regulator-max-microvolt = <3300000>;
65 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
71 vcc_sdhi2: regulator@2 {
72 compatible = "regulator-fixed";
74 regulator-name = "SDHI2 Vcc";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
80 vccq_sdhi2: regulator@3 {
81 compatible = "regulator-gpio";
83 regulator-name = "SDHI2 VccQ";
84 regulator-min-microvolt = <1800000>;
85 regulator-max-microvolt = <3300000>;
87 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
94 compatible = "hdmi-connector";
99 remote-endpoint = <&adv7511_out>;
105 compatible = "fixed-clock";
107 clock-frequency = <148500000>;
111 compatible = "fixed-clock";
113 clock-frequency = <74250000>;
117 compatible = "fixed-clock";
119 clock-frequency = <11289600>;
120 clock-output-names = "audio_clock";
124 compatible = "simple-audio-card";
126 simple-audio-card,format = "left_j";
127 simple-audio-card,bitclock-master = <&soundcodec>;
128 simple-audio-card,frame-master = <&soundcodec>;
130 simple-audio-card,cpu {
131 sound-dai = <&rcar_sound>;
134 soundcodec: simple-audio-card,codec {
135 sound-dai = <&ak4642>;
142 clock-frequency = <20000000>;
146 pinctrl-0 = <&scif_clk_pins>;
147 pinctrl-names = "default";
149 scif0_pins: serial0 {
150 renesas,groups = "scif0_data_d";
151 renesas,function = "scif0";
154 scif_clk_pins: scif_clk {
155 renesas,groups = "scif_clk";
156 renesas,function = "scif_clk";
160 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
161 renesas,function = "eth";
165 renesas,groups = "intc_irq0";
166 renesas,function = "intc";
170 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
171 renesas,function = "sdhi0";
175 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
176 renesas,function = "sdhi2";
180 renesas,groups = "qspi_ctrl", "qspi_data4";
181 renesas,function = "qspi";
185 renesas,groups = "i2c2";
186 renesas,function = "i2c2";
190 renesas,groups = "usb0";
191 renesas,function = "usb0";
195 renesas,groups = "usb1";
196 renesas,function = "usb1";
200 renesas,groups = "vin0_data8", "vin0_clk";
201 renesas,function = "vin0";
205 renesas,groups = "can0_data";
206 renesas,function = "can0";
210 renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
211 renesas,function = "du";
215 renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
216 renesas,function = "ssi";
219 audio_clk_pins: audio_clk {
220 renesas,groups = "audio_clk_a";
221 renesas,function = "audio_clk";
226 pinctrl-0 = <&scif0_pins>;
227 pinctrl-names = "default";
233 clock-frequency = <14745600>;
238 pinctrl-0 = <ðer_pins &phy1_pins>;
239 pinctrl-names = "default";
241 phy-handle = <&phy1>;
242 renesas,ether-link-active-low;
245 phy1: ethernet-phy@1 {
247 interrupt-parent = <&irqc0>;
248 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
249 micrel,led-mode = <1>;
254 pinctrl-0 = <&sdhi0_pins>;
255 pinctrl-names = "default";
257 vmmc-supply = <&vcc_sdhi0>;
258 vqmmc-supply = <&vccq_sdhi0>;
259 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
260 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
265 pinctrl-0 = <&sdhi2_pins>;
266 pinctrl-names = "default";
268 vmmc-supply = <&vcc_sdhi2>;
269 vqmmc-supply = <&vccq_sdhi2>;
270 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
275 pinctrl-0 = <&qspi_pins>;
276 pinctrl-names = "default";
281 compatible = "spansion,s25fl512s", "jedec,spi-nor";
283 spi-max-frequency = <30000000>;
284 spi-tx-bus-width = <4>;
285 spi-rx-bus-width = <4>;
289 compatible = "fixed-partitions";
290 #address-cells = <1>;
294 label = "loader_prg";
295 reg = <0x00000000 0x00040000>;
300 reg = <0x00040000 0x00400000>;
305 reg = <0x00440000 0x03bc0000>;
312 pinctrl-0 = <&i2c2_pins>;
313 pinctrl-names = "default";
316 clock-frequency = <400000>;
319 compatible = "asahi-kasei,ak4642";
320 #sound-dai-cells = <0>;
325 compatible = "adi,adv7180";
332 remote-endpoint = <&vin0ep>;
338 compatible = "adi,adv7511w";
340 interrupt-parent = <&gpio3>;
341 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
343 adi,input-depth = <8>;
344 adi,input-colorspace = "rgb";
345 adi,input-clock = "1x";
346 adi,input-style = <1>;
347 adi,input-justification = "evenly";
350 #address-cells = <1>;
355 adv7511_in: endpoint {
356 remote-endpoint = <&du_out_rgb>;
362 adv7511_out: endpoint {
363 remote-endpoint = <&hdmi_con>;
374 /* composite video input */
377 pinctrl-0 = <&vin0_pins>;
378 pinctrl-names = "default";
381 #address-cells = <1>;
385 remote-endpoint = <&adv7180>;
392 pinctrl-0 = <&usb0_pins>;
393 pinctrl-names = "default";
399 pinctrl-0 = <&usb1_pins>;
400 pinctrl-names = "default";
406 pinctrl-0 = <&usb0_pins>;
407 pinctrl-names = "default";
425 pinctrl-0 = <&can0_pins>;
426 pinctrl-names = "default";
432 pinctrl-0 = <&du_pins>;
433 pinctrl-names = "default";
436 clocks = <&mstp7_clks R8A7791_CLK_DU0>,
437 <&mstp7_clks R8A7791_CLK_DU1>,
438 <&mstp7_clks R8A7791_CLK_LVDS0>,
439 <&x3_clk>, <&x16_clk>;
440 clock-names = "du.0", "du.1", "lvds.0",
441 "dclkin.0", "dclkin.1";
446 remote-endpoint = <&adv7511_in>;
453 pinctrl-0 = <&ssi_pins &audio_clk_pins>;
454 pinctrl-names = "default";
458 #sound-dai-cells = <0>;