arch/arm/boot/dts/ste-href.dtsi

   1 /*
   2  * Copyright 2012 ST-Ericsson AB
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include "ste-dbx5x0.dtsi"
  14 #include "ste-href-family-pinctrl.dtsi"
  15
  16 / {
  17         memory {
  18                 reg = <0x00000000 0x20000000>;
  19         };
  20
  21         soc {
  22                 uart@80120000 {
  23                         pinctrl-names = "default", "sleep";
  24                         pinctrl-0 = <&uart0_default_mode>;
  25                         pinctrl-1 = <&uart0_sleep_mode>;
  26                         status = "okay";
  27                 };
  28
  29                 /* This UART is unused and thus left disabled */
  30                 uart@80121000 {
  31                         pinctrl-names = "default", "sleep";
  32                         pinctrl-0 = <&uart1_default_mode>;
  33                         pinctrl-1 = <&uart1_sleep_mode>;
  34                 };
  35
  36                 uart@80007000 {
  37                         pinctrl-names = "default", "sleep";
  38                         pinctrl-0 = <&uart2_default_mode>;
  39                         pinctrl-1 = <&uart2_sleep_mode>;
  40                         status = "okay";
  41                 };
  42
  43                 i2c@80004000 {
  44                         pinctrl-names = "default","sleep";
  45                         pinctrl-0 = <&i2c0_default_mode>;
  46                         pinctrl-1 = <&i2c0_sleep_mode>;
  47                 };
  48
  49                 i2c@80122000 {
  50                         pinctrl-names = "default","sleep";
  51                         pinctrl-0 = <&i2c1_default_mode>;
  52                         pinctrl-1 = <&i2c1_sleep_mode>;
  53                 };
  54
  55                 i2c@80128000 {
  56                         pinctrl-names = "default","sleep";
  57                         pinctrl-0 = <&i2c2_default_mode>;
  58                         pinctrl-1 = <&i2c2_sleep_mode>;
  59                         lp5521@33 {
  60                                 compatible = "national,lp5521";
  61                                 reg = <0x33>;
  62                                 label = "lp5521_pri";
  63                                 clock-mode = /bits/ 8 <2>;
  64                                 chan0 {
  65                                         led-cur = /bits/ 8 <0x2f>;
  66                                         max-cur = /bits/ 8 <0x5f>;
  67                                         linux,default-trigger = "heartbeat";
  68                                 };
  69                                 chan1 {
  70                                         led-cur = /bits/ 8 <0x2f>;
  71                                         max-cur = /bits/ 8 <0x5f>;
  72                                 };
  73                                 chan2 {
  74                                         led-cur = /bits/ 8 <0x2f>;
  75                                         max-cur = /bits/ 8 <0x5f>;
  76                                 };
  77                         };
  78                         lp5521@34 {
  79                                 compatible = "national,lp5521";
  80                                 reg = <0x34>;
  81                                 label = "lp5521_sec";
  82                                 clock-mode = /bits/ 8 <2>;
  83                                 chan0 {
  84                                         led-cur = /bits/ 8 <0x2f>;
  85                                         max-cur = /bits/ 8 <0x5f>;
  86                                 };
  87                                 chan1 {
  88                                         led-cur = /bits/ 8 <0x2f>;
  89                                         max-cur = /bits/ 8 <0x5f>;
  90                                 };
  91                                 chan2 {
  92                                         led-cur = /bits/ 8 <0x2f>;
  93                                         max-cur = /bits/ 8 <0x5f>;
  94                                 };
  95                         };
  96                         bh1780@29 {
  97                                 compatible = "rohm,bh1780gli";
  98                                 reg = <0x29>;
  99                         };
 100                 };
 101
 102                 i2c@80110000 {
 103                         pinctrl-names = "default","sleep";
 104                         pinctrl-0 = <&i2c3_default_mode>;
 105                         pinctrl-1 = <&i2c3_sleep_mode>;
 106                 };
 107
 108                 /* ST6G3244ME level translator for 1.8/2.9 V */
 109                 vmmci: regulator-gpio {
 110                         compatible = "regulator-gpio";
 111
 112                         regulator-min-microvolt = <1800000>;
 113                         regulator-max-microvolt = <2900000>;
 114                         regulator-name = "mmci-reg";
 115                         regulator-type = "voltage";
 116
 117                         startup-delay-us = <100>;
 118
 119                         states = <1800000 0x1
 120                                   2900000 0x0>;
 121                 };
 122
 123                 // External Micro SD slot
 124                 sdi0_per1@80126000 {
 125                         arm,primecell-periphid = <0x10480180>;
 126                         max-frequency = <100000000>;
 127                         bus-width = <4>;
 128                         cap-sd-highspeed;
 129                         cap-mmc-highspeed;
 130                         sd-uhs-sdr12;
 131                         sd-uhs-sdr25;
 132                         full-pwr-cycle;
 133                         st,sig-dir-dat0;
 134                         st,sig-dir-dat2;
 135                         st,sig-dir-cmd;
 136                         st,sig-pin-fbclk;
 137                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 138                         vqmmc-supply = <&vmmci>;
 139                         pinctrl-names = "default", "sleep";
 140                         pinctrl-0 = <&sdi0_default_mode>;
 141                         pinctrl-1 = <&sdi0_sleep_mode>;
 142
 143                         status = "okay";
 144                 };
 145
 146                 // WLAN SDIO channel
 147                 sdi1_per2@80118000 {
 148                         arm,primecell-periphid = <0x10480180>;
 149                         max-frequency = <100000000>;
 150                         bus-width = <4>;
 151                         non-removable;
 152                         pinctrl-names = "default", "sleep";
 153                         pinctrl-0 = <&sdi1_default_mode>;
 154                         pinctrl-1 = <&sdi1_sleep_mode>;
 155
 156                         status = "okay";
 157                 };
 158
 159                 // PoP:ed eMMC
 160                 sdi2_per3@80005000 {
 161                         arm,primecell-periphid = <0x10480180>;
 162                         max-frequency = <100000000>;
 163                         bus-width = <8>;
 164                         cap-mmc-highspeed;
 165                         non-removable;
 166                         vmmc-supply = <&db8500_vsmps2_reg>;
 167                         pinctrl-names = "default", "sleep";
 168                         pinctrl-0 = <&sdi2_default_mode>;
 169                         pinctrl-1 = <&sdi2_sleep_mode>;
 170
 171                         status = "okay";
 172                 };
 173
 174                 // On-board eMMC
 175                 sdi4_per2@80114000 {
 176                         arm,primecell-periphid = <0x10480180>;
 177                         max-frequency = <100000000>;
 178                         bus-width = <8>;
 179                         cap-mmc-highspeed;
 180                         non-removable;
 181                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 182                         pinctrl-names = "default", "sleep";
 183                         pinctrl-0 = <&sdi4_default_mode>;
 184                         pinctrl-1 = <&sdi4_sleep_mode>;
 185
 186                         status = "okay";
 187                 };
 188
 189                 sound {
 190                         compatible = "stericsson,snd-soc-mop500";
 191
 192                         stericsson,cpu-dai = <&msp1 &msp3>;
 193                         stericsson,audio-codec = <&codec>;
 194                         clocks = <&prcmu_clk PRCMU_SYSCLK>;
 195                         clock-names = "sysclk";
 196                 };
 197
 198                 msp0: msp@80123000 {
 199                         pinctrl-names = "default";
 200                         pinctrl-0 = <&msp0_default_mode>;
 201                         status = "okay";
 202                 };
 203
 204                 msp1: msp@80124000 {
 205                         pinctrl-names = "default";
 206                         pinctrl-0 = <&msp1_default_mode>;
 207                         status = "okay";
 208                 };
 209
 210                 msp2: msp@80117000 {
 211                         pinctrl-names = "default";
 212                         pinctrl-0 = <&msp2_default_mode>;
 213                 };
 214
 215                 msp3: msp@80125000 {
 216                         status = "okay";
 217                 };
 218
 219                 prcmu@80157000 {
 220                         ab8500 {
 221                                 ab8500-gpio {
 222                                 };
 223
 224                                 ab8500_usb {
 225                                         pinctrl-names = "default", "sleep";
 226                                         pinctrl-0 = <&musb_default_mode>;
 227                                         pinctrl-1 = <&musb_sleep_mode>;
 228                                 };
 229
 230                                 ab8500-regulators {
 231                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 232                                                 regulator-name = "V-DISPLAY";
 233                                         };
 234
 235                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 236                                                 regulator-name = "V-eMMC1";
 237                                         };
 238
 239                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 240                                                 regulator-name = "V-MMC-SD";
 241                                         };
 242
 243                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 244                                                 regulator-name = "V-INTCORE";
 245                                         };
 246
 247                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 248                                                 regulator-name = "V-TVOUT";
 249                                         };
 250
 251                                         ab8500_ldo_usb_reg: ab8500_ldo_usb {
 252                                                 regulator-name = "dummy";
 253                                         };
 254
 255                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 256                                                 regulator-name = "V-AUD";
 257                                         };
 258
 259                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 260                                                 regulator-name = "V-AMIC1";
 261                                         };
 262
 263                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 264                                                 regulator-name = "V-AMIC2";
 265                                         };
 266
 267                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 268                                                 regulator-name = "V-DMIC";
 269                                         };
 270
 271                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 272                                                 regulator-name = "V-CSI/DSI";
 273                                         };
 274                                 };
 275                         };
 276                 };
 277
 278                 mcde@a0350000 {
 279                         pinctrl-names = "default", "sleep";
 280                         pinctrl-0 = <&lcd_default_mode>;
 281                         pinctrl-1 = <&lcd_sleep_mode>;
 282                 };
 283         };
 284 };