2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
53 compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
62 stdout-path = "serial0:115200n8";
66 compatible = "gpio-leds";
67 pinctrl-names = "default";
68 pinctrl-0 = <&led_pins_lamobo_r1>;
71 label = "lamobo_r1:green:usr";
72 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
76 reg_gmac_3v3: gmac-3v3 {
77 compatible = "regulator-fixed";
78 pinctrl-names = "default";
79 pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
80 regulator-name = "gmac-3v3";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 startup-delay-us = <100000>;
85 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
90 allwinner,pins = "PB3";
94 target-supply = <®_ahci_5v>;
99 cpu-supply = <®_dcdc2>;
111 pinctrl-names = "default";
112 pinctrl-0 = <&gmac_pins_rgmii_a>;
115 phy-supply = <®_gmac_3v3>;
118 phy1: ethernet-phy@1 {
124 pinctrl-names = "default";
125 pinctrl-0 = <&i2c0_pins_a>;
130 interrupt-parent = <&nmi_intc>;
131 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&i2c2_pins_a>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&ir0_rx_pins_a>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
150 vmmc-supply = <®_vcc3v3>;
152 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
170 usb0_id_detect_pin: usb0_id_detect_pin@0 {
171 allwinner,pins = "PH4";
172 allwinner,function = "gpio_in";
173 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
174 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
177 mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
178 allwinner,pins = "PH10";
179 allwinner,function = "gpio_in";
180 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
181 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
184 gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
185 allwinner,pins = "PH23";
186 allwinner,function = "gpio_out";
187 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
188 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
191 led_pins_lamobo_r1: led_pins@0 {
192 allwinner,pins = "PH24";
193 allwinner,function = "gpio_out";
194 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
195 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
199 #include "axp209.dtsi"
202 gpio = <&pio 1 3 0>; /* PB3 */
208 regulator-min-microvolt = <1000000>;
209 regulator-max-microvolt = <1400000>;
210 regulator-name = "vdd-cpu";
215 regulator-min-microvolt = <1000000>;
216 regulator-max-microvolt = <1400000>;
217 regulator-name = "vdd-int-dll";
221 regulator-name = "vdd-rtc";
226 regulator-min-microvolt = <3000000>;
227 regulator-max-microvolt = <3000000>;
228 regulator-name = "avcc";
244 pinctrl-names = "default";
245 pinctrl-0 = <&spi0_pins_a>,
252 pinctrl-names = "default";
253 pinctrl-0 = <&uart0_pins_a>;
258 pinctrl-names = "default";
259 pinctrl-0 = <&uart3_pins_b>;
264 pinctrl-names = "default";
265 pinctrl-0 = <&uart7_pins_a>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&usb0_id_detect_pin>;
281 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
282 usb0_vbus_power-supply = <&usb_power_supply>;
283 usb0_vbus-supply = <®_usb0_vbus>;
284 usb1_vbus-supply = <®_usb1_vbus>;
285 usb2_vbus-supply = <®_usb2_vbus>;