arch/arm/boot/dts/vfxxx.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  */
   9
  10 #include "vf610-pinfunc.h"
  11 #include <dt-bindings/clock/vf610-clock.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         aliases {
  17                 can0 = &can0;
  18                 can1 = &can1;
  19                 ethernet0 = &fec0;
  20                 ethernet1 = &fec1;
  21                 serial0 = &uart0;
  22                 serial1 = &uart1;
  23                 serial2 = &uart2;
  24                 serial3 = &uart3;
  25                 serial4 = &uart4;
  26                 serial5 = &uart5;
  27                 gpio0 = &gpio0;
  28                 gpio1 = &gpio1;
  29                 gpio2 = &gpio2;
  30                 gpio3 = &gpio3;
  31                 gpio4 = &gpio4;
  32                 usbphy0 = &usbphy0;
  33                 usbphy1 = &usbphy1;
  34         };
  35
  36         fxosc: fxosc {
  37                 compatible = "fixed-clock";
  38                 #clock-cells = <0>;
  39                 clock-frequency = <24000000>;
  40         };
  41
  42         sxosc: sxosc {
  43                 compatible = "fixed-clock";
  44                 #clock-cells = <0>;
  45                 clock-frequency = <32768>;
  46         };
  47
  48         reboot: syscon-reboot {
  49                 compatible = "syscon-reboot";
  50                 regmap = <&src>;
  51                 offset = <0x0>;
  52                 mask = <0x1000>;
  53         };
  54
  55         soc {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "simple-bus";
  59                 interrupt-parent = <&mscm_ir>;
  60                 ranges;
  61
  62                 aips0: aips-bus@40000000 {
  63                         compatible = "fsl,aips-bus", "simple-bus";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         ranges;
  67
  68                         mscm_cpucfg: cpucfg@40001000 {
  69                                 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
  70                                 reg = <0x40001000 0x800>;
  71                         };
  72
  73                         mscm_ir: interrupt-controller@40001800 {
  74                                 compatible = "fsl,vf610-mscm-ir";
  75                                 reg = <0x40001800 0x400>;
  76                                 fsl,cpucfg = <&mscm_cpucfg>;
  77                                 interrupt-controller;
  78                                 #interrupt-cells = <2>;
  79                         };
  80
  81                         edma0: dma-controller@40018000 {
  82                                 #dma-cells = <2>;
  83                                 compatible = "fsl,vf610-edma";
  84                                 reg = <0x40018000 0x2000>,
  85                                         <0x40024000 0x1000>,
  86                                         <0x40025000 0x1000>;
  87                                 dma-channels = <32>;
  88                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
  89                                                 <9 IRQ_TYPE_LEVEL_HIGH>;
  90                                 interrupt-names = "edma-tx", "edma-err";
  91                                 clock-names = "dmamux0", "dmamux1";
  92                                 clocks = <&clks VF610_CLK_DMAMUX0>,
  93                                         <&clks VF610_CLK_DMAMUX1>;
  94                                 status = "disabled";
  95                         };
  96
  97                         can0: flexcan@40020000 {
  98                                 compatible = "fsl,vf610-flexcan";
  99                                 reg = <0x40020000 0x4000>;
 100                                 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 101                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
 102                                          <&clks VF610_CLK_FLEXCAN0>;
 103                                 clock-names = "ipg", "per";
 104                                 status = "disabled";
 105                         };
 106
 107                         uart0: serial@40027000 {
 108                                 compatible = "fsl,vf610-lpuart";
 109                                 reg = <0x40027000 0x1000>;
 110                                 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 111                                 clocks = <&clks VF610_CLK_UART0>;
 112                                 clock-names = "ipg";
 113                                 dmas = <&edma0 0 2>,
 114                                         <&edma0 0 3>;
 115                                 dma-names = "rx","tx";
 116                                 status = "disabled";
 117                         };
 118
 119                         uart1: serial@40028000 {
 120                                 compatible = "fsl,vf610-lpuart";
 121                                 reg = <0x40028000 0x1000>;
 122                                 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 123                                 clocks = <&clks VF610_CLK_UART1>;
 124                                 clock-names = "ipg";
 125                                 dmas = <&edma0 0 4>,
 126                                         <&edma0 0 5>;
 127                                 dma-names = "rx","tx";
 128                                 status = "disabled";
 129                         };
 130
 131                         uart2: serial@40029000 {
 132                                 compatible = "fsl,vf610-lpuart";
 133                                 reg = <0x40029000 0x1000>;
 134                                 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 135                                 clocks = <&clks VF610_CLK_UART2>;
 136                                 clock-names = "ipg";
 137                                 dmas = <&edma0 0 6>,
 138                                         <&edma0 0 7>;
 139                                 dma-names = "rx","tx";
 140                                 status = "disabled";
 141                         };
 142
 143                         uart3: serial@4002a000 {
 144                                 compatible = "fsl,vf610-lpuart";
 145                                 reg = <0x4002a000 0x1000>;
 146                                 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 147                                 clocks = <&clks VF610_CLK_UART3>;
 148                                 clock-names = "ipg";
 149                                 dmas = <&edma0 0 8>,
 150                                         <&edma0 0 9>;
 151                                 dma-names = "rx","tx";
 152                                 status = "disabled";
 153                         };
 154
 155                         dspi0: dspi0@4002c000 {
 156                                 #address-cells = <1>;
 157                                 #size-cells = <0>;
 158                                 compatible = "fsl,vf610-dspi";
 159                                 reg = <0x4002c000 0x1000>;
 160                                 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 161                                 clocks = <&clks VF610_CLK_DSPI0>;
 162                                 clock-names = "dspi";
 163                                 spi-num-chipselects = <6>;
 164                                 status = "disabled";
 165                         };
 166
 167                         dspi1: dspi1@4002d000 {
 168                                 #address-cells = <1>;
 169                                 #size-cells = <0>;
 170                                 compatible = "fsl,vf610-dspi";
 171                                 reg = <0x4002d000 0x1000>;
 172                                 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 173                                 clocks = <&clks VF610_CLK_DSPI1>;
 174                                 clock-names = "dspi";
 175                                 spi-num-chipselects = <4>;
 176                                 status = "disabled";
 177                         };
 178
 179                         sai0: sai@4002f000 {
 180                                 compatible = "fsl,vf610-sai";
 181                                 reg = <0x4002f000 0x1000>;
 182                                 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
 183                                 clocks = <&clks VF610_CLK_SAI0>,
 184                                         <&clks VF610_CLK_SAI0_DIV>,
 185                                         <&clks 0>, <&clks 0>;
 186                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 187                                 dma-names = "tx", "rx";
 188                                 dmas = <&edma0 0 17>,
 189                                         <&edma0 0 16>;
 190                                 status = "disabled";
 191                         };
 192
 193                         sai1: sai@40030000 {
 194                                 compatible = "fsl,vf610-sai";
 195                                 reg = <0x40030000 0x1000>;
 196                                 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
 197                                 clocks = <&clks VF610_CLK_SAI1>,
 198                                         <&clks VF610_CLK_SAI1_DIV>,
 199                                         <&clks 0>, <&clks 0>;
 200                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 201                                 dma-names = "tx", "rx";
 202                                 dmas = <&edma0 0 19>,
 203                                         <&edma0 0 18>;
 204                                 status = "disabled";
 205                         };
 206
 207                         sai2: sai@40031000 {
 208                                 compatible = "fsl,vf610-sai";
 209                                 reg = <0x40031000 0x1000>;
 210                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 211                                 clocks = <&clks VF610_CLK_SAI2>,
 212                                         <&clks VF610_CLK_SAI2_DIV>,
 213                                         <&clks 0>, <&clks 0>;
 214                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 215                                 dma-names = "tx", "rx";
 216                                 dmas = <&edma0 0 21>,
 217                                         <&edma0 0 20>;
 218                                 status = "disabled";
 219                         };
 220
 221                         sai3: sai@40032000 {
 222                                 compatible = "fsl,vf610-sai";
 223                                 reg = <0x40032000 0x1000>;
 224                                 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
 225                                 clocks = <&clks VF610_CLK_SAI3>,
 226                                         <&clks VF610_CLK_SAI3_DIV>,
 227                                         <&clks 0>, <&clks 0>;
 228                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 229                                 dma-names = "tx", "rx";
 230                                 dmas = <&edma0 1 9>,
 231                                         <&edma0 1 8>;
 232                                 status = "disabled";
 233                         };
 234
 235                         pit: pit@40037000 {
 236                                 compatible = "fsl,vf610-pit";
 237                                 reg = <0x40037000 0x1000>;
 238                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 239                                 clocks = <&clks VF610_CLK_PIT>;
 240                                 clock-names = "pit";
 241                         };
 242
 243                         pwm0: pwm@40038000 {
 244                                 compatible = "fsl,vf610-ftm-pwm";
 245                                 #pwm-cells = <3>;
 246                                 reg = <0x40038000 0x1000>;
 247                                 clock-names = "ftm_sys", "ftm_ext",
 248                                               "ftm_fix", "ftm_cnt_clk_en";
 249                                 clocks = <&clks VF610_CLK_FTM0>,
 250                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 251                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 252                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 253                                 status = "disabled";
 254                         };
 255
 256                         pwm1: pwm@40039000 {
 257                                 compatible = "fsl,vf610-ftm-pwm";
 258                                 #pwm-cells = <3>;
 259                                 reg = <0x40039000 0x1000>;
 260                                 clock-names = "ftm_sys", "ftm_ext",
 261                                               "ftm_fix", "ftm_cnt_clk_en";
 262                                 clocks = <&clks VF610_CLK_FTM1>,
 263                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 264                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 265                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 266                                 status = "disabled";
 267                         };
 268
 269                         adc0: adc@4003b000 {
 270                                 compatible = "fsl,vf610-adc";
 271                                 reg = <0x4003b000 0x1000>;
 272                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 273                                 clocks = <&clks VF610_CLK_ADC0>;
 274                                 clock-names = "adc";
 275                                 #io-channel-cells = <1>;
 276                                 status = "disabled";
 277                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 278                                                         <20000000>;
 279                         };
 280
 281                         wdoga5: wdog@4003e000 {
 282                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 283                                 reg = <0x4003e000 0x1000>;
 284                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 285                                 clocks = <&clks VF610_CLK_WDT>;
 286                                 clock-names = "wdog";
 287                                 status = "disabled";
 288                         };
 289
 290                         qspi0: quadspi@40044000 {
 291                                 #address-cells = <1>;
 292                                 #size-cells = <0>;
 293                                 compatible = "fsl,vf610-qspi";
 294                                 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 295                                 reg-names = "QuadSPI", "QuadSPI-memory";
 296                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 297                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 298                                         <&clks VF610_CLK_QSPI0>;
 299                                 clock-names = "qspi_en", "qspi";
 300                                 status = "disabled";
 301                         };
 302
 303                         iomuxc: iomuxc@40048000 {
 304                                 compatible = "fsl,vf610-iomuxc";
 305                                 reg = <0x40048000 0x1000>;
 306                         };
 307
 308                         gpio0: gpio@40049000 {
 309                                 compatible = "fsl,vf610-gpio";
 310                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 311                                 gpio-controller;
 312                                 #gpio-cells = <2>;
 313                                 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 314                                 interrupt-controller;
 315                                 #interrupt-cells = <2>;
 316                                 gpio-ranges = <&iomuxc 0 0 32>;
 317                         };
 318
 319                         gpio1: gpio@4004a000 {
 320                                 compatible = "fsl,vf610-gpio";
 321                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 322                                 gpio-controller;
 323                                 #gpio-cells = <2>;
 324                                 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 325                                 interrupt-controller;
 326                                 #interrupt-cells = <2>;
 327                                 gpio-ranges = <&iomuxc 0 32 32>;
 328                         };
 329
 330                         gpio2: gpio@4004b000 {
 331                                 compatible = "fsl,vf610-gpio";
 332                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 333                                 gpio-controller;
 334                                 #gpio-cells = <2>;
 335                                 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 336                                 interrupt-controller;
 337                                 #interrupt-cells = <2>;
 338                                 gpio-ranges = <&iomuxc 0 64 32>;
 339                         };
 340
 341                         gpio3: gpio@4004c000 {
 342                                 compatible = "fsl,vf610-gpio";
 343                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 344                                 gpio-controller;
 345                                 #gpio-cells = <2>;
 346                                 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 347                                 interrupt-controller;
 348                                 #interrupt-cells = <2>;
 349                                 gpio-ranges = <&iomuxc 0 96 32>;
 350                         };
 351
 352                         gpio4: gpio@4004d000 {
 353                                 compatible = "fsl,vf610-gpio";
 354                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 355                                 gpio-controller;
 356                                 #gpio-cells = <2>;
 357                                 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 358                                 interrupt-controller;
 359                                 #interrupt-cells = <2>;
 360                                 gpio-ranges = <&iomuxc 0 128 7>;
 361                         };
 362
 363                         anatop: anatop@40050000 {
 364                                 compatible = "fsl,vf610-anatop", "syscon";
 365                                 reg = <0x40050000 0x400>;
 366                         };
 367
 368                         usbphy0: usbphy@40050800 {
 369                                 compatible = "fsl,vf610-usbphy";
 370                                 reg = <0x40050800 0x400>;
 371                                 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 372                                 clocks = <&clks VF610_CLK_USBPHY0>;
 373                                 fsl,anatop = <&anatop>;
 374                                 status = "disabled";
 375                         };
 376
 377                         usbphy1: usbphy@40050c00 {
 378                                 compatible = "fsl,vf610-usbphy";
 379                                 reg = <0x40050c00 0x400>;
 380                                 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 381                                 clocks = <&clks VF610_CLK_USBPHY1>;
 382                                 fsl,anatop = <&anatop>;
 383                                 status = "disabled";
 384                         };
 385
 386                         i2c0: i2c@40066000 {
 387                                 #address-cells = <1>;
 388                                 #size-cells = <0>;
 389                                 compatible = "fsl,vf610-i2c";
 390                                 reg = <0x40066000 0x1000>;
 391                                 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 392                                 clocks = <&clks VF610_CLK_I2C0>;
 393                                 clock-names = "ipg";
 394                                 dmas = <&edma0 0 50>,
 395                                         <&edma0 0 51>;
 396                                 dma-names = "rx","tx";
 397                                 status = "disabled";
 398                         };
 399
 400                         i2c1: i2c@40067000 {
 401                                 #address-cells = <1>;
 402                                 #size-cells = <0>;
 403                                 compatible = "fsl,vf610-i2c";
 404                                 reg = <0x40067000 0x1000>;
 405                                 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 406                                 clocks = <&clks VF610_CLK_I2C1>;
 407                                 clock-names = "ipg";
 408                                 dmas = <&edma0 0 52>,
 409                                         <&edma0 0 53>;
 410                                 dma-names = "rx","tx";
 411                                 status = "disabled";
 412                         };
 413
 414                         clks: ccm@4006b000 {
 415                                 compatible = "fsl,vf610-ccm";
 416                                 reg = <0x4006b000 0x1000>;
 417                                 clocks = <&sxosc>, <&fxosc>;
 418                                 clock-names = "sxosc", "fxosc";
 419                                 #clock-cells = <1>;
 420                         };
 421
 422                         usbdev0: usb@40034000 {
 423                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 424                                 reg = <0x40034000 0x800>;
 425                                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 426                                 clocks = <&clks VF610_CLK_USBC0>;
 427                                 fsl,usbphy = <&usbphy0>;
 428                                 fsl,usbmisc = <&usbmisc0 0>;
 429                                 dr_mode = "peripheral";
 430                                 status = "disabled";
 431                         };
 432
 433                         usbmisc0: usb@40034800 {
 434                                 #index-cells = <1>;
 435                                 compatible = "fsl,vf610-usbmisc";
 436                                 reg = <0x40034800 0x200>;
 437                                 clocks = <&clks VF610_CLK_USBC0>;
 438                                 status = "disabled";
 439                         };
 440
 441                         src: src@4006e000 {
 442                                 compatible = "fsl,vf610-src", "syscon";
 443                                 reg = <0x4006e000 0x1000>;
 444                                 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 445                         };
 446                 };
 447
 448                 aips1: aips-bus@40080000 {
 449                         compatible = "fsl,aips-bus", "simple-bus";
 450                         #address-cells = <1>;
 451                         #size-cells = <1>;
 452                         ranges;
 453
 454                         edma1: dma-controller@40098000 {
 455                                 #dma-cells = <2>;
 456                                 compatible = "fsl,vf610-edma";
 457                                 reg = <0x40098000 0x2000>,
 458                                         <0x400a1000 0x1000>,
 459                                         <0x400a2000 0x1000>;
 460                                 dma-channels = <32>;
 461                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 462                                                 <11 IRQ_TYPE_LEVEL_HIGH>;
 463                                 interrupt-names = "edma-tx", "edma-err";
 464                                 clock-names = "dmamux0", "dmamux1";
 465                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 466                                         <&clks VF610_CLK_DMAMUX3>;
 467                                 status = "disabled";
 468                         };
 469
 470                         snvs0: snvs@400a7000 {
 471                             compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 472                                 reg = <0x400a7000 0x2000>;
 473
 474                                 snvsrtc: snvs-rtc-lp {
 475                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 476                                         regmap = <&snvs0>;
 477                                         offset = <0x34>;
 478                                         interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 479                                         clocks = <&clks VF610_CLK_SNVS>;
 480                                         clock-names = "snvs-rtc";
 481                                 };
 482                         };
 483
 484                         uart4: serial@400a9000 {
 485                                 compatible = "fsl,vf610-lpuart";
 486                                 reg = <0x400a9000 0x1000>;
 487                                 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 488                                 clocks = <&clks VF610_CLK_UART4>;
 489                                 clock-names = "ipg";
 490                                 status = "disabled";
 491                         };
 492
 493                         uart5: serial@400aa000 {
 494                                 compatible = "fsl,vf610-lpuart";
 495                                 reg = <0x400aa000 0x1000>;
 496                                 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 497                                 clocks = <&clks VF610_CLK_UART5>;
 498                                 clock-names = "ipg";
 499                                 status = "disabled";
 500                         };
 501
 502                         dspi2: dspi2@400ac000 {
 503                                 #address-cells = <1>;
 504                                 #size-cells = <0>;
 505                                 compatible = "fsl,vf610-dspi";
 506                                 reg = <0x400ac000 0x1000>;
 507                                 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
 508                                 clocks = <&clks VF610_CLK_DSPI2>;
 509                                 clock-names = "dspi";
 510                                 spi-num-chipselects = <2>;
 511                                 status = "disabled";
 512                         };
 513
 514                         dspi3: dspi3@400ad000 {
 515                                 #address-cells = <1>;
 516                                 #size-cells = <0>;
 517                                 compatible = "fsl,vf610-dspi";
 518                                 reg = <0x400ad000 0x1000>;
 519                                 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
 520                                 clocks = <&clks VF610_CLK_DSPI3>;
 521                                 clock-names = "dspi";
 522                                 spi-num-chipselects = <2>;
 523                                 status = "disabled";
 524                         };
 525
 526                         adc1: adc@400bb000 {
 527                                 compatible = "fsl,vf610-adc";
 528                                 reg = <0x400bb000 0x1000>;
 529                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 530                                 clocks = <&clks VF610_CLK_ADC1>;
 531                                 clock-names = "adc";
 532                                 #io-channel-cells = <1>;
 533                                 status = "disabled";
 534                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 535                                                         <20000000>;
 536                         };
 537
 538                         esdhc0: esdhc@400b1000 {
 539                                 compatible = "fsl,imx53-esdhc";
 540                                 reg = <0x400b1000 0x1000>;
 541                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 542                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 543                                         <&clks VF610_CLK_PLATFORM_BUS>,
 544                                         <&clks VF610_CLK_ESDHC0>;
 545                                 clock-names = "ipg", "ahb", "per";
 546                                 status = "disabled";
 547                         };
 548
 549                         esdhc1: esdhc@400b2000 {
 550                                 compatible = "fsl,imx53-esdhc";
 551                                 reg = <0x400b2000 0x1000>;
 552                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 553                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 554                                         <&clks VF610_CLK_PLATFORM_BUS>,
 555                                         <&clks VF610_CLK_ESDHC1>;
 556                                 clock-names = "ipg", "ahb", "per";
 557                                 status = "disabled";
 558                         };
 559
 560                         usbh1: usb@400b4000 {
 561                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 562                                 reg = <0x400b4000 0x800>;
 563                                 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 564                                 clocks = <&clks VF610_CLK_USBC1>;
 565                                 fsl,usbphy = <&usbphy1>;
 566                                 fsl,usbmisc = <&usbmisc1 0>;
 567                                 dr_mode = "host";
 568                                 status = "disabled";
 569                         };
 570
 571                         usbmisc1: usb@400b4800 {
 572                                 #index-cells = <1>;
 573                                 compatible = "fsl,vf610-usbmisc";
 574                                 reg = <0x400b4800 0x200>;
 575                                 clocks = <&clks VF610_CLK_USBC1>;
 576                                 status = "disabled";
 577                         };
 578
 579                         ftm: ftm@400b8000 {
 580                                 compatible = "fsl,ftm-timer";
 581                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 582                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 583                                 clock-names = "ftm-evt", "ftm-src",
 584                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 585                                 clocks = <&clks VF610_CLK_FTM2>,
 586                                         <&clks VF610_CLK_FTM3>,
 587                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 588                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 589                                 status = "disabled";
 590                         };
 591
 592                         qspi1: quadspi@400c4000 {
 593                                 #address-cells = <1>;
 594                                 #size-cells = <0>;
 595                                 compatible = "fsl,vf610-qspi";
 596                                 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 597                                 reg-names = "QuadSPI", "QuadSPI-memory";
 598                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 599                                 clocks = <&clks VF610_CLK_QSPI1_EN>,
 600                                         <&clks VF610_CLK_QSPI1>;
 601                                 clock-names = "qspi_en", "qspi";
 602                                 status = "disabled";
 603                         };
 604
 605                         fec0: ethernet@400d0000 {
 606                                 compatible = "fsl,mvf600-fec";
 607                                 reg = <0x400d0000 0x1000>;
 608                                 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 609                                 clocks = <&clks VF610_CLK_ENET0>,
 610                                         <&clks VF610_CLK_ENET0>,
 611                                         <&clks VF610_CLK_ENET>;
 612                                 clock-names = "ipg", "ahb", "ptp";
 613                                 status = "disabled";
 614                         };
 615
 616                         fec1: ethernet@400d1000 {
 617                                 compatible = "fsl,mvf600-fec";
 618                                 reg = <0x400d1000 0x1000>;
 619                                 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 620                                 clocks = <&clks VF610_CLK_ENET1>,
 621                                         <&clks VF610_CLK_ENET1>,
 622                                         <&clks VF610_CLK_ENET>;
 623                                 clock-names = "ipg", "ahb", "ptp";
 624                                 status = "disabled";
 625                         };
 626
 627                         can1: flexcan@400d4000 {
 628                                 compatible = "fsl,vf610-flexcan";
 629                                 reg = <0x400d4000 0x4000>;
 630                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 631                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 632                                          <&clks VF610_CLK_FLEXCAN1>;
 633                                 clock-names = "ipg", "per";
 634                                 status = "disabled";
 635                         };
 636
 637                         nfc: nand@400e0000 {
 638                                 #address-cells = <1>;
 639                                 #size-cells = <0>;
 640                                 compatible = "fsl,vf610-nfc";
 641                                 reg = <0x400e0000 0x4000>;
 642                                 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
 643                                 clocks = <&clks VF610_CLK_NFC>;
 644                                 clock-names = "nfc";
 645                                 status = "disabled";
 646                         };
 647
 648                         i2c2: i2c@400e6000 {
 649                                 #address-cells = <1>;
 650                                 #size-cells = <0>;
 651                                 compatible = "fsl,vf610-i2c";
 652                                 reg = <0x400e6000 0x1000>;
 653                                 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 654                                 clocks = <&clks VF610_CLK_I2C2>;
 655                                 clock-names = "ipg";
 656                                 dmas = <&edma0 1 36>,
 657                                         <&edma0 1 37>;
 658                                 dma-names = "rx","tx";
 659                                 status = "disabled";
 660                         };
 661
 662                         i2c3: i2c@400e7000 {
 663                                 #address-cells = <1>;
 664                                 #size-cells = <0>;
 665                                 compatible = "fsl,vf610-i2c";
 666                                 reg = <0x400e7000 0x1000>;
 667                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 668                                 clocks = <&clks VF610_CLK_I2C3>;
 669                                 clock-names = "ipg";
 670                                 dmas = <&edma0 1 38>,
 671                                         <&edma0 1 39>;
 672                                 dma-names = "rx","tx";
 673                                 status = "disabled";
 674                         };
 675                 };
 676         };
 677 };