]> git.karo-electronics.de Git - linux-beck.git/blob - arch/arm/common/gic.c
ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts
[linux-beck.git] / arch / arm / common / gic.c
1 /*
2  *  linux/arch/arm/common/gic.c
3  *
4  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  * Interrupt architecture for the GIC:
11  *
12  * o There is one Interrupt Distributor, which receives interrupts
13  *   from system devices and sends them to the Interrupt Controllers.
14  *
15  * o There is one CPU Interface per CPU, which sends interrupts sent
16  *   by the Distributor, and interrupts generated locally, to the
17  *   associated CPU. The base address of the CPU interface is usually
18  *   aliased so that the same address points to different chips depending
19  *   on the CPU it is accessed from.
20  *
21  * Note that IRQs 0-31 are special - they are local to each CPU.
22  * As such, the enable set/clear, pending set/clear and active bit
23  * registers are banked per-cpu for these sources.
24  */
25 #include <linux/init.h>
26 #include <linux/kernel.h>
27 #include <linux/list.h>
28 #include <linux/smp.h>
29 #include <linux/cpumask.h>
30 #include <linux/io.h>
31
32 #include <asm/irq.h>
33 #include <asm/mach/irq.h>
34 #include <asm/hardware/gic.h>
35
36 static DEFINE_SPINLOCK(irq_controller_lock);
37
38 struct gic_chip_data {
39         unsigned int irq_offset;
40         void __iomem *dist_base;
41         void __iomem *cpu_base;
42 };
43
44 #ifndef MAX_GIC_NR
45 #define MAX_GIC_NR      1
46 #endif
47
48 static struct gic_chip_data gic_data[MAX_GIC_NR];
49
50 static inline void __iomem *gic_dist_base(unsigned int irq)
51 {
52         struct gic_chip_data *gic_data = get_irq_chip_data(irq);
53         return gic_data->dist_base;
54 }
55
56 static inline void __iomem *gic_cpu_base(unsigned int irq)
57 {
58         struct gic_chip_data *gic_data = get_irq_chip_data(irq);
59         return gic_data->cpu_base;
60 }
61
62 static inline unsigned int gic_irq(unsigned int irq)
63 {
64         struct gic_chip_data *gic_data = get_irq_chip_data(irq);
65         return irq - gic_data->irq_offset;
66 }
67
68 /*
69  * Routines to acknowledge, disable and enable interrupts
70  */
71 static void gic_ack_irq(unsigned int irq)
72 {
73
74         spin_lock(&irq_controller_lock);
75         writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
76         spin_unlock(&irq_controller_lock);
77 }
78
79 static void gic_mask_irq(unsigned int irq)
80 {
81         u32 mask = 1 << (irq % 32);
82
83         spin_lock(&irq_controller_lock);
84         writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
85         spin_unlock(&irq_controller_lock);
86 }
87
88 static void gic_unmask_irq(unsigned int irq)
89 {
90         u32 mask = 1 << (irq % 32);
91
92         spin_lock(&irq_controller_lock);
93         writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
94         spin_unlock(&irq_controller_lock);
95 }
96
97 static int gic_set_type(unsigned int irq, unsigned int type)
98 {
99         void __iomem *base = gic_dist_base(irq);
100         unsigned int gicirq = gic_irq(irq);
101         u32 enablemask = 1 << (gicirq % 32);
102         u32 enableoff = (gicirq / 32) * 4;
103         u32 confmask = 0x2 << ((gicirq % 16) * 2);
104         u32 confoff = (gicirq / 16) * 4;
105         bool enabled = false;
106         u32 val;
107
108         /* Interrupt configuration for SGIs can't be changed */
109         if (gicirq < 16)
110                 return -EINVAL;
111
112         if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
113                 return -EINVAL;
114
115         spin_lock(&irq_controller_lock);
116
117         val = readl(base + GIC_DIST_CONFIG + confoff);
118         if (type == IRQ_TYPE_LEVEL_HIGH)
119                 val &= ~confmask;
120         else if (type == IRQ_TYPE_EDGE_RISING)
121                 val |= confmask;
122
123         /*
124          * As recommended by the spec, disable the interrupt before changing
125          * the configuration
126          */
127         if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
128                 writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
129                 enabled = true;
130         }
131
132         writel(val, base + GIC_DIST_CONFIG + confoff);
133
134         if (enabled)
135                 writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
136
137         spin_unlock(&irq_controller_lock);
138
139         return 0;
140 }
141
142 #ifdef CONFIG_SMP
143 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
144 {
145         void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
146         unsigned int shift = (irq % 4) * 8;
147         unsigned int cpu = cpumask_first(mask_val);
148         u32 val;
149
150         spin_lock(&irq_controller_lock);
151         irq_desc[irq].node = cpu;
152         val = readl(reg) & ~(0xff << shift);
153         val |= 1 << (cpu + shift);
154         writel(val, reg);
155         spin_unlock(&irq_controller_lock);
156
157         return 0;
158 }
159 #endif
160
161 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
162 {
163         struct gic_chip_data *chip_data = get_irq_data(irq);
164         struct irq_chip *chip = get_irq_chip(irq);
165         unsigned int cascade_irq, gic_irq;
166         unsigned long status;
167
168         /* primary controller ack'ing */
169         chip->ack(irq);
170
171         spin_lock(&irq_controller_lock);
172         status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
173         spin_unlock(&irq_controller_lock);
174
175         gic_irq = (status & 0x3ff);
176         if (gic_irq == 1023)
177                 goto out;
178
179         cascade_irq = gic_irq + chip_data->irq_offset;
180         if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
181                 do_bad_IRQ(cascade_irq, desc);
182         else
183                 generic_handle_irq(cascade_irq);
184
185  out:
186         /* primary controller unmasking */
187         chip->unmask(irq);
188 }
189
190 static struct irq_chip gic_chip = {
191         .name           = "GIC",
192         .ack            = gic_ack_irq,
193         .mask           = gic_mask_irq,
194         .unmask         = gic_unmask_irq,
195         .set_type       = gic_set_type,
196 #ifdef CONFIG_SMP
197         .set_affinity   = gic_set_cpu,
198 #endif
199 };
200
201 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
202 {
203         if (gic_nr >= MAX_GIC_NR)
204                 BUG();
205         if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
206                 BUG();
207         set_irq_chained_handler(irq, gic_handle_cascade_irq);
208 }
209
210 void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
211                           unsigned int irq_start)
212 {
213         unsigned int gic_irqs, irq_limit, i;
214         u32 cpumask = 1 << smp_processor_id();
215
216         if (gic_nr >= MAX_GIC_NR)
217                 BUG();
218
219         cpumask |= cpumask << 8;
220         cpumask |= cpumask << 16;
221
222         gic_data[gic_nr].dist_base = base;
223         gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
224
225         writel(0, base + GIC_DIST_CTRL);
226
227         /*
228          * Find out how many interrupts are supported.
229          * The GIC only supports up to 1020 interrupt sources.
230          */
231         gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
232         gic_irqs = (gic_irqs + 1) * 32;
233         if (gic_irqs > 1020)
234                 gic_irqs = 1020;
235
236         /*
237          * Set all global interrupts to be level triggered, active low.
238          */
239         for (i = 32; i < gic_irqs; i += 16)
240                 writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
241
242         /*
243          * Set all global interrupts to this CPU only.
244          */
245         for (i = 32; i < gic_irqs; i += 4)
246                 writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
247
248         /*
249          * Set priority on all global interrupts.
250          */
251         for (i = 32; i < gic_irqs; i += 4)
252                 writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
253
254         /*
255          * Disable all interrupts.  Leave the PPI and SGIs alone
256          * as these enables are banked registers.
257          */
258         for (i = 32; i < gic_irqs; i += 32)
259                 writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
260
261         /*
262          * Limit number of interrupts registered to the platform maximum
263          */
264         irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
265         if (WARN_ON(irq_limit > NR_IRQS))
266                 irq_limit = NR_IRQS;
267
268         /*
269          * Setup the Linux IRQ subsystem.
270          */
271         for (i = irq_start; i < irq_limit; i++) {
272                 set_irq_chip(i, &gic_chip);
273                 set_irq_chip_data(i, &gic_data[gic_nr]);
274                 set_irq_handler(i, handle_level_irq);
275                 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
276         }
277
278         writel(1, base + GIC_DIST_CTRL);
279 }
280
281 void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
282 {
283         void __iomem *dist_base;
284         int i;
285
286         if (gic_nr >= MAX_GIC_NR)
287                 BUG();
288
289         dist_base = gic_data[gic_nr].dist_base;
290         BUG_ON(!dist_base);
291
292         gic_data[gic_nr].cpu_base = base;
293
294         /*
295          * Deal with the banked PPI and SGI interrupts - disable all
296          * PPI interrupts, ensure all SGI interrupts are enabled.
297          */
298         writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
299         writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
300
301         /*
302          * Set priority on PPI and SGI interrupts
303          */
304         for (i = 0; i < 32; i += 4)
305                 writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
306
307         writel(0xf0, base + GIC_CPU_PRIMASK);
308         writel(1, base + GIC_CPU_CTRL);
309 }
310
311 #ifdef CONFIG_SMP
312 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
313 {
314         unsigned long map = *cpus_addr(*mask);
315
316         /* this always happens on GIC0 */
317         writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
318 }
319 #endif