2 * linux/arch/arm/common/vic.c
4 * Copyright (C) 1999 - 2003 ARM Limited
5 * Copyright (C) 2000 Deep Blue Solutions Ltd
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/export.h>
23 #include <linux/init.h>
24 #include <linux/list.h>
26 #include <linux/irqdomain.h>
28 #include <linux/of_address.h>
29 #include <linux/of_irq.h>
30 #include <linux/syscore_ops.h>
31 #include <linux/device.h>
32 #include <linux/amba/bus.h>
34 #include <asm/exception.h>
35 #include <asm/mach/irq.h>
36 #include <asm/hardware/vic.h>
39 * struct vic_device - VIC PM device
40 * @irq: The IRQ number for the base of the VIC.
41 * @base: The register base for the VIC.
42 * @valid_sources: A bitmask of valid interrupts
43 * @resume_sources: A bitmask of interrupts for resume.
44 * @resume_irqs: The IRQs enabled for resume.
45 * @int_select: Save for VIC_INT_SELECT.
46 * @int_enable: Save for VIC_INT_ENABLE.
47 * @soft_int: Save for VIC_INT_SOFT.
48 * @protect: Save for VIC_PROTECT.
49 * @domain: The IRQ domain for the VIC.
61 struct irq_domain *domain;
64 /* we cannot allocate memory when VICs are initially registered */
65 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
70 * vic_init2 - common initialisation code
71 * @base: Base of the VIC.
73 * Common initialisation code for registration
76 static void vic_init2(void __iomem *base)
80 for (i = 0; i < 16; i++) {
81 void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
82 writel(VIC_VECT_CNTL_ENABLE | i, reg);
85 writel(32, base + VIC_PL190_DEF_VECT_ADDR);
89 static void resume_one_vic(struct vic_device *vic)
91 void __iomem *base = vic->base;
93 printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
95 /* re-initialise static settings */
98 writel(vic->int_select, base + VIC_INT_SELECT);
99 writel(vic->protect, base + VIC_PROTECT);
101 /* set the enabled ints and then clear the non-enabled */
102 writel(vic->int_enable, base + VIC_INT_ENABLE);
103 writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
105 /* and the same for the soft-int register */
107 writel(vic->soft_int, base + VIC_INT_SOFT);
108 writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
111 static void vic_resume(void)
115 for (id = vic_id - 1; id >= 0; id--)
116 resume_one_vic(vic_devices + id);
119 static void suspend_one_vic(struct vic_device *vic)
121 void __iomem *base = vic->base;
123 printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
125 vic->int_select = readl(base + VIC_INT_SELECT);
126 vic->int_enable = readl(base + VIC_INT_ENABLE);
127 vic->soft_int = readl(base + VIC_INT_SOFT);
128 vic->protect = readl(base + VIC_PROTECT);
130 /* set the interrupts (if any) that are used for
131 * resuming the system */
133 writel(vic->resume_irqs, base + VIC_INT_ENABLE);
134 writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
137 static int vic_suspend(void)
141 for (id = 0; id < vic_id; id++)
142 suspend_one_vic(vic_devices + id);
147 struct syscore_ops vic_syscore_ops = {
148 .suspend = vic_suspend,
149 .resume = vic_resume,
153 * vic_pm_init - initicall to register VIC pm
155 * This is called via late_initcall() to register
156 * the resources for the VICs due to the early
157 * nature of the VIC's registration.
159 static int __init vic_pm_init(void)
162 register_syscore_ops(&vic_syscore_ops);
166 late_initcall(vic_pm_init);
167 #endif /* CONFIG_PM */
169 static struct irq_chip vic_chip;
171 static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq,
172 irq_hw_number_t hwirq)
174 struct vic_device *v = d->host_data;
176 /* Skip invalid IRQs, only register handlers for the real ones */
177 if (!(v->valid_sources & (1 << hwirq)))
179 irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq);
180 irq_set_chip_data(irq, v->base);
181 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
185 static struct irq_domain_ops vic_irqdomain_ops = {
186 .map = vic_irqdomain_map,
187 .xlate = irq_domain_xlate_onetwocell,
191 * vic_register() - Register a VIC.
192 * @base: The base address of the VIC.
193 * @irq: The base IRQ for the VIC.
194 * @valid_sources: bitmask of valid interrupts
195 * @resume_sources: bitmask of interrupts allowed for resume sources.
196 * @node: The device tree node associated with the VIC.
198 * Register the VIC with the system device tree so that it can be notified
199 * of suspend and resume requests and ensure that the correct actions are
200 * taken to re-instate the settings on resume.
202 * This also configures the IRQ domain for the VIC.
204 static void __init vic_register(void __iomem *base, unsigned int irq,
205 u32 valid_sources, u32 resume_sources,
206 struct device_node *node)
208 struct vic_device *v;
210 if (vic_id >= ARRAY_SIZE(vic_devices)) {
211 printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
215 v = &vic_devices[vic_id];
217 v->valid_sources = valid_sources;
218 v->resume_sources = resume_sources;
221 v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
222 &vic_irqdomain_ops, v);
225 static void vic_ack_irq(struct irq_data *d)
227 void __iomem *base = irq_data_get_irq_chip_data(d);
228 unsigned int irq = d->hwirq;
229 writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
230 /* moreover, clear the soft-triggered, in case it was the reason */
231 writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
234 static void vic_mask_irq(struct irq_data *d)
236 void __iomem *base = irq_data_get_irq_chip_data(d);
237 unsigned int irq = d->hwirq;
238 writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
241 static void vic_unmask_irq(struct irq_data *d)
243 void __iomem *base = irq_data_get_irq_chip_data(d);
244 unsigned int irq = d->hwirq;
245 writel(1 << irq, base + VIC_INT_ENABLE);
248 #if defined(CONFIG_PM)
249 static struct vic_device *vic_from_irq(unsigned int irq)
251 struct vic_device *v = vic_devices;
252 unsigned int base_irq = irq & ~31;
255 for (id = 0; id < vic_id; id++, v++) {
256 if (v->irq == base_irq)
263 static int vic_set_wake(struct irq_data *d, unsigned int on)
265 struct vic_device *v = vic_from_irq(d->irq);
266 unsigned int off = d->hwirq;
272 if (!(bit & v->resume_sources))
276 v->resume_irqs |= bit;
278 v->resume_irqs &= ~bit;
283 #define vic_set_wake NULL
284 #endif /* CONFIG_PM */
286 static struct irq_chip vic_chip = {
288 .irq_ack = vic_ack_irq,
289 .irq_mask = vic_mask_irq,
290 .irq_unmask = vic_unmask_irq,
291 .irq_set_wake = vic_set_wake,
294 static void __init vic_disable(void __iomem *base)
296 writel(0, base + VIC_INT_SELECT);
297 writel(0, base + VIC_INT_ENABLE);
298 writel(~0, base + VIC_INT_ENABLE_CLEAR);
299 writel(0, base + VIC_ITCR);
300 writel(~0, base + VIC_INT_SOFT_CLEAR);
303 static void __init vic_clear_interrupts(void __iomem *base)
307 writel(0, base + VIC_PL190_VECT_ADDR);
308 for (i = 0; i < 19; i++) {
311 value = readl(base + VIC_PL190_VECT_ADDR);
312 writel(value, base + VIC_PL190_VECT_ADDR);
317 * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
318 * The original cell has 32 interrupts, while the modified one has 64,
319 * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
320 * the probe function is called twice, with base set to offset 000
321 * and 020 within the page. We call this "second block".
323 static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
324 u32 vic_sources, struct device_node *node)
327 int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
329 /* Disable all interrupts initially. */
333 * Make sure we clear all existing interrupts. The vector registers
334 * in this cell are after the second block of general registers,
335 * so we can address them using standard offsets, but only from
336 * the second base address, which is 0x20 in the page
339 vic_clear_interrupts(base);
341 /* ST has 16 vectors as well, but we don't enable them by now */
342 for (i = 0; i < 16; i++) {
343 void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
347 writel(32, base + VIC_PL190_DEF_VECT_ADDR);
350 vic_register(base, irq_start, vic_sources, 0, node);
353 void __init __vic_init(void __iomem *base, int irq_start,
354 u32 vic_sources, u32 resume_sources,
355 struct device_node *node)
359 enum amba_vendor vendor;
361 /* Identify which VIC cell this one is, by reading the ID */
362 for (i = 0; i < 4; i++) {
364 addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
365 cellid |= (readl(addr) & 0xff) << (8 * i);
367 vendor = (cellid >> 12) & 0xff;
368 printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
369 base, cellid, vendor);
373 vic_init_st(base, irq_start, vic_sources, node);
376 printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
378 case AMBA_VENDOR_ARM:
382 /* Disable all interrupts initially. */
385 /* Make sure we clear all existing interrupts */
386 vic_clear_interrupts(base);
390 vic_register(base, irq_start, vic_sources, resume_sources, node);
394 * vic_init() - initialise a vectored interrupt controller
395 * @base: iomem base address
396 * @irq_start: starting interrupt number, must be muliple of 32
397 * @vic_sources: bitmask of interrupt sources to allow
398 * @resume_sources: bitmask of interrupt sources to allow for resume
400 void __init vic_init(void __iomem *base, unsigned int irq_start,
401 u32 vic_sources, u32 resume_sources)
403 __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
407 int __init vic_of_init(struct device_node *node, struct device_node *parent)
412 if (WARN(parent, "non-root VICs are not supported"))
415 regs = of_iomap(node, 0);
420 * Passing -1 as first IRQ makes the simple domain allocate descriptors
422 __vic_init(regs, -1, ~0, ~0, node);
426 #endif /* CONFIG OF */
429 * Handle each interrupt in a single VIC. Returns non-zero if we've
430 * handled at least one interrupt. This reads the status register
431 * before handling each interrupt, which is necessary given that
432 * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
434 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
439 while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
441 handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
449 * Keep iterating over all registered VIC's until there are no pending
452 asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
457 for (i = 0, handled = 0; i < vic_id; ++i)
458 handled |= handle_one_vic(&vic_devices[i], regs);