2 * ARMv6 Performance counter handling code.
4 * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
6 * ARMv6 has 2 configurable performance counters and a single cycle counter.
7 * They all share a single reset bit but can be written to zero so we can use
10 * The counters can't be individually enabled or disabled so when we remove
11 * one event and replace it with another we could get spurious counts from the
12 * wrong event. However, we can take advantage of the fact that the
13 * performance counters can export events to the event bus, and the event bus
14 * itself can be monitored. This requires that we *don't* export the events to
15 * the event bus. The procedure for disabling a configurable counter is:
16 * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
17 * effectively stops the counter from counting.
18 * - disable the counter's interrupt generation (each counter has it's
19 * own interrupt enable bit).
20 * Once stopped, the counter value can be written as 0 to reset.
22 * To enable a counter:
23 * - enable the counter's interrupt generation.
24 * - set the new event type.
26 * Note: the dedicated cycle counter only counts cycles and can't be
27 * enabled/disabled independently of the others. When we want to disable the
28 * cycle counter, we have to just disable the interrupt reporting and start
29 * ignoring that counter. When re-enabling, we have to reset the value and
30 * enable the interrupt.
33 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
34 enum armv6_perf_types {
35 ARMV6_PERFCTR_ICACHE_MISS = 0x0,
36 ARMV6_PERFCTR_IBUF_STALL = 0x1,
37 ARMV6_PERFCTR_DDEP_STALL = 0x2,
38 ARMV6_PERFCTR_ITLB_MISS = 0x3,
39 ARMV6_PERFCTR_DTLB_MISS = 0x4,
40 ARMV6_PERFCTR_BR_EXEC = 0x5,
41 ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
42 ARMV6_PERFCTR_INSTR_EXEC = 0x7,
43 ARMV6_PERFCTR_DCACHE_HIT = 0x9,
44 ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
45 ARMV6_PERFCTR_DCACHE_MISS = 0xB,
46 ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
47 ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
48 ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
49 ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
50 ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
51 ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
52 ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
53 ARMV6_PERFCTR_NOP = 0x20,
57 ARMV6_CYCLE_COUNTER = 0,
63 * The hardware events that we support. We do support cache operations but
64 * we have harvard caches and no way to combine instruction and data
65 * accesses/misses in hardware.
67 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
68 [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
69 [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
70 [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
71 [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
72 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
73 [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
74 [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
75 [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
76 [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL,
79 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
80 [PERF_COUNT_HW_CACHE_OP_MAX]
81 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
84 * The performance counters don't differentiate between read
85 * and write accesses/misses so this isn't strictly correct,
86 * but it's the best we can do. Writes and reads get
90 [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
91 [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
94 [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
95 [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
98 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
99 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
104 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
105 [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
108 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
109 [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
112 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
113 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
118 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
119 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
122 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
123 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
126 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
127 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
132 * The ARM performance counters can count micro DTLB misses,
133 * micro ITLB misses and main TLB misses. There isn't an event
134 * for TLB misses, so use the micro misses here and if users
135 * want the main TLB misses they can use a raw counter.
138 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
139 [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
142 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
143 [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
146 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
147 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
152 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
153 [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
156 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
157 [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
160 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
161 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
166 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
167 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
170 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
171 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
174 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
175 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
180 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
181 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
184 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
185 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
188 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
189 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
194 enum armv6mpcore_perf_types {
195 ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
196 ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
197 ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
198 ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
199 ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
200 ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
201 ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
202 ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
203 ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
204 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
205 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
206 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
207 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
208 ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
209 ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
210 ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
211 ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
212 ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
213 ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
214 ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
218 * The hardware events that we support. We do support cache operations but
219 * we have harvard caches and no way to combine instruction and data
220 * accesses/misses in hardware.
222 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
223 [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
224 [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
225 [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
226 [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
227 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
228 [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
229 [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
230 [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
231 [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
234 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
235 [PERF_COUNT_HW_CACHE_OP_MAX]
236 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
240 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
242 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
246 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
248 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
251 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
252 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
257 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
258 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
261 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
262 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
265 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
266 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
271 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
272 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
275 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
276 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
279 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
280 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
285 * The ARM performance counters can count micro DTLB misses,
286 * micro ITLB misses and main TLB misses. There isn't an event
287 * for TLB misses, so use the micro misses here and if users
288 * want the main TLB misses they can use a raw counter.
291 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
292 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
295 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
296 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
299 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
300 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
305 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
306 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
309 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
310 [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
313 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
314 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
319 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
320 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
323 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
324 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
327 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
328 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
333 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
334 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
337 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
338 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
341 [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
342 [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
347 static inline unsigned long
348 armv6_pmcr_read(void)
351 asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
356 armv6_pmcr_write(unsigned long val)
358 asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
361 #define ARMV6_PMCR_ENABLE (1 << 0)
362 #define ARMV6_PMCR_CTR01_RESET (1 << 1)
363 #define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
364 #define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
365 #define ARMV6_PMCR_COUNT0_IEN (1 << 4)
366 #define ARMV6_PMCR_COUNT1_IEN (1 << 5)
367 #define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
368 #define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
369 #define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
370 #define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
371 #define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
372 #define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
373 #define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
374 #define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
376 #define ARMV6_PMCR_OVERFLOWED_MASK \
377 (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
378 ARMV6_PMCR_CCOUNT_OVERFLOW)
381 armv6_pmcr_has_overflowed(unsigned long pmcr)
383 return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
387 armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
388 enum armv6_counters counter)
392 if (ARMV6_CYCLE_COUNTER == counter)
393 ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
394 else if (ARMV6_COUNTER0 == counter)
395 ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
396 else if (ARMV6_COUNTER1 == counter)
397 ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
399 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
405 armv6pmu_read_counter(int counter)
407 unsigned long value = 0;
409 if (ARMV6_CYCLE_COUNTER == counter)
410 asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
411 else if (ARMV6_COUNTER0 == counter)
412 asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
413 else if (ARMV6_COUNTER1 == counter)
414 asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
416 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
422 armv6pmu_write_counter(int counter,
425 if (ARMV6_CYCLE_COUNTER == counter)
426 asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
427 else if (ARMV6_COUNTER0 == counter)
428 asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
429 else if (ARMV6_COUNTER1 == counter)
430 asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
432 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
436 armv6pmu_enable_event(struct hw_perf_event *hwc,
439 unsigned long val, mask, evt, flags;
440 struct pmu_hw_events *events = cpu_pmu->get_hw_events();
442 if (ARMV6_CYCLE_COUNTER == idx) {
444 evt = ARMV6_PMCR_CCOUNT_IEN;
445 } else if (ARMV6_COUNTER0 == idx) {
446 mask = ARMV6_PMCR_EVT_COUNT0_MASK;
447 evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
448 ARMV6_PMCR_COUNT0_IEN;
449 } else if (ARMV6_COUNTER1 == idx) {
450 mask = ARMV6_PMCR_EVT_COUNT1_MASK;
451 evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
452 ARMV6_PMCR_COUNT1_IEN;
454 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
459 * Mask out the current event and set the counter to count the event
460 * that we're interested in.
462 raw_spin_lock_irqsave(&events->pmu_lock, flags);
463 val = armv6_pmcr_read();
466 armv6_pmcr_write(val);
467 raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
471 armv6pmu_handle_irq(int irq_num,
474 unsigned long pmcr = armv6_pmcr_read();
475 struct perf_sample_data data;
476 struct pmu_hw_events *cpuc;
477 struct pt_regs *regs;
480 if (!armv6_pmcr_has_overflowed(pmcr))
483 regs = get_irq_regs();
486 * The interrupts are cleared by writing the overflow flags back to
487 * the control register. All of the other bits don't have any effect
488 * if they are rewritten, so write the whole value back.
490 armv6_pmcr_write(pmcr);
492 cpuc = &__get_cpu_var(cpu_hw_events);
493 for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
494 struct perf_event *event = cpuc->events[idx];
495 struct hw_perf_event *hwc;
497 /* Ignore if we don't have an event. */
502 * We have a single interrupt for all counters. Check that
503 * each counter has overflowed before we process it.
505 if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
509 armpmu_event_update(event, hwc, idx);
510 perf_sample_data_init(&data, 0, hwc->last_period);
511 if (!armpmu_event_set_period(event, hwc, idx))
514 if (perf_event_overflow(event, &data, regs))
515 cpu_pmu->disable(hwc, idx);
519 * Handle the pending perf events.
521 * Note: this call *must* be run with interrupts disabled. For
522 * platforms that can have the PMU interrupts raised as an NMI, this
533 unsigned long flags, val;
534 struct pmu_hw_events *events = cpu_pmu->get_hw_events();
536 raw_spin_lock_irqsave(&events->pmu_lock, flags);
537 val = armv6_pmcr_read();
538 val |= ARMV6_PMCR_ENABLE;
539 armv6_pmcr_write(val);
540 raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
546 unsigned long flags, val;
547 struct pmu_hw_events *events = cpu_pmu->get_hw_events();
549 raw_spin_lock_irqsave(&events->pmu_lock, flags);
550 val = armv6_pmcr_read();
551 val &= ~ARMV6_PMCR_ENABLE;
552 armv6_pmcr_write(val);
553 raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
557 armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
558 struct hw_perf_event *event)
560 /* Always place a cycle counter into the cycle counter. */
561 if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
562 if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
565 return ARMV6_CYCLE_COUNTER;
568 * For anything other than a cycle counter, try and use
569 * counter0 and counter1.
571 if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
572 return ARMV6_COUNTER1;
574 if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
575 return ARMV6_COUNTER0;
577 /* The counters are all in use. */
583 armv6pmu_disable_event(struct hw_perf_event *hwc,
586 unsigned long val, mask, evt, flags;
587 struct pmu_hw_events *events = cpu_pmu->get_hw_events();
589 if (ARMV6_CYCLE_COUNTER == idx) {
590 mask = ARMV6_PMCR_CCOUNT_IEN;
592 } else if (ARMV6_COUNTER0 == idx) {
593 mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
594 evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
595 } else if (ARMV6_COUNTER1 == idx) {
596 mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
597 evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
599 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
604 * Mask out the current event and set the counter to count the number
605 * of ETM bus signal assertion cycles. The external reporting should
606 * be disabled and so this should never increment.
608 raw_spin_lock_irqsave(&events->pmu_lock, flags);
609 val = armv6_pmcr_read();
612 armv6_pmcr_write(val);
613 raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
617 armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
620 unsigned long val, mask, flags, evt = 0;
621 struct pmu_hw_events *events = cpu_pmu->get_hw_events();
623 if (ARMV6_CYCLE_COUNTER == idx) {
624 mask = ARMV6_PMCR_CCOUNT_IEN;
625 } else if (ARMV6_COUNTER0 == idx) {
626 mask = ARMV6_PMCR_COUNT0_IEN;
627 } else if (ARMV6_COUNTER1 == idx) {
628 mask = ARMV6_PMCR_COUNT1_IEN;
630 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
635 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
636 * simply disable the interrupt reporting.
638 raw_spin_lock_irqsave(&events->pmu_lock, flags);
639 val = armv6_pmcr_read();
642 armv6_pmcr_write(val);
643 raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
646 static int armv6_map_event(struct perf_event *event)
648 return map_cpu_event(event, &armv6_perf_map,
649 &armv6_perf_cache_map, 0xFF);
652 static struct arm_pmu armv6pmu = {
653 .id = ARM_PERF_PMU_ID_V6,
655 .handle_irq = armv6pmu_handle_irq,
656 .enable = armv6pmu_enable_event,
657 .disable = armv6pmu_disable_event,
658 .read_counter = armv6pmu_read_counter,
659 .write_counter = armv6pmu_write_counter,
660 .get_event_idx = armv6pmu_get_event_idx,
661 .start = armv6pmu_start,
662 .stop = armv6pmu_stop,
663 .map_event = armv6_map_event,
665 .max_period = (1LLU << 32) - 1,
668 static struct arm_pmu *__init armv6pmu_init(void)
674 * ARMv6mpcore is almost identical to single core ARMv6 with the exception
675 * that some of the events have different enumerations and that there is no
676 * *hack* to stop the programmable counters. To stop the counters we simply
677 * disable the interrupt reporting and update the event. When unthrottling we
678 * reset the period and enable the interrupt reporting.
681 static int armv6mpcore_map_event(struct perf_event *event)
683 return map_cpu_event(event, &armv6mpcore_perf_map,
684 &armv6mpcore_perf_cache_map, 0xFF);
687 static struct arm_pmu armv6mpcore_pmu = {
688 .id = ARM_PERF_PMU_ID_V6MP,
690 .handle_irq = armv6pmu_handle_irq,
691 .enable = armv6pmu_enable_event,
692 .disable = armv6mpcore_pmu_disable_event,
693 .read_counter = armv6pmu_read_counter,
694 .write_counter = armv6pmu_write_counter,
695 .get_event_idx = armv6pmu_get_event_idx,
696 .start = armv6pmu_start,
697 .stop = armv6pmu_stop,
698 .map_event = armv6mpcore_map_event,
700 .max_period = (1LLU << 32) - 1,
703 static struct arm_pmu *__init armv6mpcore_pmu_init(void)
705 return &armv6mpcore_pmu;
708 static struct arm_pmu *__init armv6pmu_init(void)
713 static struct arm_pmu *__init armv6mpcore_pmu_init(void)
717 #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */