1 menu "Atmel Non-DT world"
3 config HAVE_AT91_DATAFLASH_CARD
7 prompt "Atmel AT91 Processor Devices for non DT boards"
8 depends on !ARCH_AT91X40
13 config ARCH_AT91RM9200
16 select AT91_USE_OLD_CLK
18 config ARCH_AT91SAM9260
19 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
20 select SOC_AT91SAM9260
21 select AT91_USE_OLD_CLK
23 config ARCH_AT91SAM9261
24 bool "AT91SAM9261 or AT91SAM9G10"
25 select SOC_AT91SAM9261
26 select AT91_USE_OLD_CLK
28 config ARCH_AT91SAM9263
30 select SOC_AT91SAM9263
31 select AT91_USE_OLD_CLK
33 config ARCH_AT91SAM9RL
36 select AT91_USE_OLD_CLK
38 config ARCH_AT91SAM9G45
40 select SOC_AT91SAM9G45
41 select AT91_USE_OLD_CLK
45 config ARCH_AT91SAM9G20
47 select ARCH_AT91SAM9260
49 config ARCH_AT91SAM9G10
51 select ARCH_AT91SAM9261
53 # ----------------------------------------------------------
57 comment "AT91RM9200 Board Type"
60 bool "Ajeco 1ARM Single Board Computer"
62 Select this if you are using Ajeco's 1ARM Single Board Computer.
63 <http://www.ajeco.fi/>
65 config MACH_AT91RM9200EK
66 bool "Atmel AT91RM9200-EK Evaluation Kit"
67 select HAVE_AT91_DATAFLASH_CARD
69 Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
70 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
75 Select this if you are using Cogent's CSB337 board.
76 <http://www.cogcomp.com/csb_csb337.htm>
81 Select this if you are using Cogent's CSB637 board.
82 <http://www.cogcomp.com/csb_csb637.htm>
85 bool "Conitec ARM&EVA"
87 Select this if you are using Conitec's AT91RM9200-MCU-Module.
88 <http://www.conitec.net/english/linuxboard.php>
91 bool "Embest ATEB9200"
93 Select this if you are using Embest's ATEB9200 board.
94 <http://www.embedinfo.com/english/product/ATEB9200.asp>
97 bool "KwikByte KB920x"
99 Select this if you are using KwikByte's KB920x board.
100 <http://www.kwikbyte.com/KB9202.html>
102 config MACH_PICOTUX2XX
105 Select this if you are using a picotux 200.
106 <http://www.picotux.com/>
109 bool "Sperry-Sun KAFA board"
111 Select this if you are using Sperry-Sun's KAFA board.
114 bool "emQbit ECB_AT91 SBC"
115 select HAVE_AT91_DATAFLASH_CARD
117 Select this if you are using emQbit's ECB_AT91 board.
118 <http://wiki.emqbit.com/free-ecb-at91>
121 bool "ucDragon YL-9200"
123 Select this if you are using the ucDragon YL-9200 board.
126 bool "Eukrea CPUAT91"
128 Select this if you are using the Eukrea Electromatique's
129 CPUAT91 board <http://www.eukrea.com/>.
134 Select this if you are using the eco920 board
137 bool "RSI Embedded Webserver"
138 depends on ARCH_AT91RM9200
140 Select this if you are using RSIs EWS board.
143 # ----------------------------------------------------------
147 comment "AT91SAM9260 Variants"
149 comment "AT91SAM9260 / AT91SAM9XE Board Type"
151 config MACH_AT91SAM9260EK
152 bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
153 select HAVE_AT91_DATAFLASH_CARD
155 Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
156 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
159 bool "KwikByte KB9260 (CAM60) board"
161 Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
162 <http://www.kwikbyte.com/KB9260.html>
164 config MACH_SAM9_L9260
165 bool "Olimex SAM9-L9260 board"
166 select HAVE_AT91_DATAFLASH_CARD
168 Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
169 <http://www.olimex.com/dev/sam9-L9260.html>
172 bool "Custom afeb9260 board v1"
174 Select this if you are using custom afeb9260 board based on
175 open hardware design. Select this for revision 1 of the board.
176 <svn://194.85.238.22/home/users/george/svn/arm9eb>
177 <http://groups.google.com/group/arm9fpga-evolution-board>
180 bool "Eukrea CPU9260 board"
182 Select this if you are using a Eukrea Electromatique's
183 CPU9260 Board <http://www.eukrea.com/>
185 config MACH_FLEXIBITY
186 bool "Flexibity Connect board"
188 Select this if you are using Flexibity Connect board
189 <http://www.flexibity.com>
191 comment "AT91SAM9G20 Board Type"
193 config MACH_AT91SAM9G20EK
194 bool "Atmel AT91SAM9G20-EK Evaluation Kit"
195 select HAVE_AT91_DATAFLASH_CARD
197 Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
198 that embeds only one SD/MMC slot.
200 config MACH_AT91SAM9G20EK_2MMC
201 depends on MACH_AT91SAM9G20EK
202 bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
204 Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
205 with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
207 <http://www.atmel.com/tools/SAM9G20-EK.aspx>
210 bool "Eukrea CPU9G20 board"
212 Select this if you are using a Eukrea Electromatique's
213 CPU9G20 Board <http://www.eukrea.com/>
215 config MACH_ACMENETUSFOXG20
216 bool "Acme Systems srl FOX Board G20"
218 Select this if you are using Acme Systems
219 FOX Board G20 <http://www.acmesystems.it>
221 config MACH_PORTUXG20
222 bool "taskit PortuxG20"
224 Select this if you are using taskit's PortuxG20.
225 <http://www.taskit.de/en/>
227 config MACH_STAMP9G20
228 bool "taskit Stamp9G20 CPU module"
230 Select this if you are using taskit's Stamp9G20 CPU module on its
232 <http://www.taskit.de/en/>
234 config MACH_PCONTROL_G20
235 bool "PControl G20 CPU module"
237 Select this if you are using taskit's Stamp9G20 CPU module on this
238 carrier board, being the decentralized unit of a building automation
239 system; featuring nvram, eth-switch, iso-rs485, display, io
242 bool "GS_IA18_S board"
244 This enables support for the GS_IA18_S board
245 produced by GeoSIG Ltd company. This is an internet accelerograph.
246 <http://www.geosig.com>
248 config MACH_SNAPPER_9260
249 bool "Bluewater Systems Snapper 9260/9G20 module"
251 Select this if you are using the Bluewater Systems Snapper 9260 or
252 Snapper 9G20 modules.
253 <http://www.bluewatersys.com/>
256 # ----------------------------------------------------------
260 comment "AT91SAM9261 Board Type"
262 config MACH_AT91SAM9261EK
263 bool "Atmel AT91SAM9261-EK Evaluation Kit"
264 select HAVE_AT91_DATAFLASH_CARD
266 Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
267 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
269 comment "AT91SAM9G10 Board Type"
271 config MACH_AT91SAM9G10EK
272 bool "Atmel AT91SAM9G10-EK Evaluation Kit"
273 select HAVE_AT91_DATAFLASH_CARD
275 Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
276 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
280 # ----------------------------------------------------------
284 comment "AT91SAM9263 Board Type"
286 config MACH_AT91SAM9263EK
287 bool "Atmel AT91SAM9263-EK Evaluation Kit"
288 select HAVE_AT91_DATAFLASH_CARD
290 Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
291 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
295 # ----------------------------------------------------------
299 comment "AT91SAM9RL Board Type"
301 config MACH_AT91SAM9RLEK
302 bool "Atmel AT91SAM9RL-EK Evaluation Kit"
304 Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
308 # ----------------------------------------------------------
312 comment "AT91SAM9G45 Board Type"
314 config MACH_AT91SAM9M10G45EK
315 bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
317 Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
318 Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
319 families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
320 <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
324 # ----------------------------------------------------------
328 comment "AT91X40 Board Type"
331 bool "Atmel AT91EB01 Evaluation Kit"
333 Select this if you are using Atmel's AT91EB01 Evaluation Kit.
334 It is also a popular target for simulators such as GDB's
335 ARM simulator (commonly known as the ARMulator) and the
340 # ----------------------------------------------------------
342 comment "AT91 Board Options"
344 config MTD_AT91_DATAFLASH_CARD
345 bool "Enable DataFlash Card support"
346 depends on HAVE_AT91_DATAFLASH_CARD
348 Enable support for the DataFlash card.