2 * linux/arch/arm/mach-at91/board-kb9202.c
4 * Copyright (c) 2005 kb_admin
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/types.h>
23 #include <linux/gpio.h>
24 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/platform_device.h>
29 #include <mach/hardware.h>
30 #include <asm/setup.h>
31 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
36 #include <asm/mach/irq.h>
38 #include <mach/board.h>
40 #include <mach/at91rm9200_mc.h>
41 #include <mach/at91_ramc.h>
46 static void __init kb9202_init_early(void)
48 /* Set cpu type: PQFP */
49 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
51 /* Initialize processor: 10 MHz crystal */
52 at91_initialize(10000000);
55 at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
57 /* DBGU on ttyS0. (Rx & Tx only) */
58 at91_register_uart(0, 0, 0);
60 /* USART0 on ttyS1 (Rx & Tx only) */
61 at91_register_uart(AT91RM9200_ID_US0, 1, 0);
63 /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
64 at91_register_uart(AT91RM9200_ID_US1, 2, 0);
66 /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
67 at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
69 /* set serial console to ttyS0 (ie, DBGU) */
70 at91_set_serial_console(0);
73 static struct macb_platform_data __initdata kb9202_eth_data = {
74 .phy_irq_pin = AT91_PIN_PB29,
78 static struct at91_usbh_data __initdata kb9202_usbh_data = {
80 .vbus_pin = {-EINVAL, -EINVAL},
81 .overcurrent_pin= {-EINVAL, -EINVAL},
84 static struct at91_udc_data __initdata kb9202_udc_data = {
85 .vbus_pin = AT91_PIN_PB24,
86 .pullup_pin = AT91_PIN_PB22,
89 static struct at91_mmc_data __initdata kb9202_mmc_data = {
90 .det_pin = AT91_PIN_PB2,
97 static struct mtd_partition __initdata kb9202_nand_partition[] = {
101 .size = MTDPART_SIZ_FULL,
105 static struct atmel_nand_data __initdata kb9202_nand_data = {
109 .rdy_pin = AT91_PIN_PC29,
110 .enable_pin = AT91_PIN_PC28,
111 .ecc_mode = NAND_ECC_SOFT,
112 .parts = kb9202_nand_partition,
113 .num_parts = ARRAY_SIZE(kb9202_nand_partition),
116 static void __init kb9202_board_init(void)
119 at91_add_device_serial();
121 at91_add_device_eth(&kb9202_eth_data);
123 at91_add_device_usbh(&kb9202_usbh_data);
125 at91_add_device_udc(&kb9202_udc_data);
127 at91_add_device_mmc(0, &kb9202_mmc_data);
129 at91_add_device_i2c(NULL, 0);
131 at91_add_device_spi(NULL, 0);
133 at91_add_device_nand(&kb9202_nand_data);
136 MACHINE_START(KB9200, "KB920x")
137 /* Maintainer: KwikByte, Inc. */
138 .timer = &at91rm9200_timer,
139 .map_io = at91_map_io,
140 .init_early = kb9202_init_early,
141 .init_irq = at91_init_irq_default,
142 .init_machine = kb9202_board_init,