10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
35 select ARCH_DAVINCI_DA8XX
36 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
39 config ARCH_DAVINCI_DA850
40 bool "DA850/OMAP-L138/AM18x based system"
41 select ARCH_DAVINCI_DA8XX
42 select ARCH_HAS_CPUFREQ
45 config ARCH_DAVINCI_DA8XX
49 config ARCH_DAVINCI_DM365
50 bool "DaVinci 365 based system"
52 select ARCH_DAVINCI_DMx
54 comment "DaVinci Board Type"
57 bool "Support DA8XX platforms using device tree"
59 depends on ARCH_DAVINCI_DA8XX
62 Say y here to include support for TI DaVinci DA850 based using
63 Flattened Device Tree. More information at Documentation/devicetree
65 config MACH_DAVINCI_EVM
67 default ARCH_DAVINCI_DM644x
68 depends on ARCH_DAVINCI_DM644x
72 Configure this option to specify the whether the board used
73 for development is a DM644x EVM
77 depends on ARCH_DAVINCI_DM644x
81 Say Y here to select the Lyrtech Small Form Factor
82 Software Defined Radio (SFFSDR) board.
84 config MACH_NEUROS_OSD2
85 bool "Neuros OSD2 Open Television Set Top Box"
86 depends on ARCH_DAVINCI_DM644x
88 Configure this option to specify the whether the board used
89 for development is a Neuros OSD2 Open Set Top Box.
91 config MACH_DAVINCI_DM355_EVM
93 default ARCH_DAVINCI_DM355
94 depends on ARCH_DAVINCI_DM355
96 Configure this option to specify the whether the board used
97 for development is a DM355 EVM
99 config MACH_DM355_LEOPARD
100 bool "DM355 Leopard board"
101 depends on ARCH_DAVINCI_DM355
103 Configure this option to specify the whether the board used
104 for development is a DM355 Leopard board.
106 config MACH_DAVINCI_DM6467_EVM
108 default ARCH_DAVINCI_DM646x
109 depends on ARCH_DAVINCI_DM646x
112 select MACH_DAVINCI_DM6467TEVM
114 Configure this option to specify the whether the board used
115 for development is a DM6467 EVM
117 config MACH_DAVINCI_DM6467TEVM
120 config MACH_DAVINCI_DM365_EVM
122 default ARCH_DAVINCI_DM365
123 depends on ARCH_DAVINCI_DM365
127 Configure this option to specify whether the board used
128 for development is a DM365 EVM
130 config MACH_DAVINCI_DA830_EVM
131 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
132 default ARCH_DAVINCI_DA830
133 depends on ARCH_DAVINCI_DA830
138 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
141 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
142 depends on MACH_DAVINCI_DA830_EVM
144 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
145 detected automatically based on successful probe of the I2C
146 based GPIO expander on that board. This option selected in this
147 menu has an effect only in case of a successful UI card detection.
152 Say Y here to use the LCD as a framebuffer or simple character
158 Say Y here to use the NAND flash. Do not forget to setup
159 the switch correctly.
162 config MACH_DAVINCI_DA850_EVM
163 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
164 default ARCH_DAVINCI_DA850
165 depends on ARCH_DAVINCI_DA850
167 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
170 prompt "Select peripherals connected to expander on UI board"
171 depends on MACH_DAVINCI_DA850_EVM
173 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
174 EVM is detected automatically based on successful probe of the I2C
175 based GPIO expander on that card. This option selected in this
176 menu has an effect only in case of a successful UI card detection.
179 bool "No peripheral is enabled"
181 Say Y if you do not want to enable any of the peripherals connected
182 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
185 bool "RMII Ethernet PHY"
187 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
188 EVM. This PHY is found on the UI daughter card that is supplied with
190 NOTE: Please take care while choosing this option, MII PHY will
191 not be functional if RMII mode is selected.
193 config DA850_UI_SD_VIDEO_PORT
194 bool "Video Port Interface"
196 Say Y if you want to use Video Port Interface (VPIF) on the
197 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
198 UI daughter card that is supplied with the EVM.
203 bool "AM18x wl1271 daughter board"
204 depends on MACH_DAVINCI_DA850_EVM
206 The wl1271 daughter card for AM18x EVMs is a combo wireless
207 connectivity add-on card, based on the LS Research TiWi module with
208 Texas Instruments' wl1271 solution.
209 Say Y if you want to use a wl1271 expansion card connected to the
213 config MACH_MITYOMAPL138
214 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
215 depends on ARCH_DAVINCI_DA850
219 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
220 System on Module. Information on this SoM may be found at
221 http://www.mitydsp.com
223 config MACH_OMAPL138_HAWKBOARD
224 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
225 depends on ARCH_DAVINCI_DA850
227 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
228 Information of this board may be found at
229 http://www.hawkboard.org/
232 bool "DAVINCI multiplexing support"
233 depends on ARCH_DAVINCI
236 Pin multiplexing support for DAVINCI boards. If your bootloader
237 sets the multiplexing correctly, say N. Otherwise, or if unsure,
240 config DAVINCI_MUX_DEBUG
241 bool "Multiplexing debug output"
242 depends on DAVINCI_MUX
244 Makes the multiplexing functions print out a lot of debug info.
245 This is useful if you want to find out the correct values of the
246 multiplexing registers.
248 config DAVINCI_MUX_WARNINGS
249 bool "Warn about pins the bootloader didn't set up"
250 depends on DAVINCI_MUX
252 Choose Y here to warn whenever driver initialization logic needs
253 to change the pin multiplexing setup. When there are no warnings
254 printed, it's safe to deselect DAVINCI_MUX for your product.
256 config DAVINCI_RESET_CLOCKS
257 bool "Reset unused clocks during boot"
258 depends on ARCH_DAVINCI
260 Say Y if you want to reset unused clocks during boot.
261 This option saves power, but assumes all drivers are
262 using the clock framework. Broken drivers that do not
263 yet use clock framework may not work with this option.
264 If you are booting from another operating system, you
265 probably do not want this option enabled until your
266 device drivers work properly.