10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
35 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
36 select ARCH_DAVINCI_DA8XX
37 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
40 config ARCH_DAVINCI_DA850
41 bool "DA850/OMAP-L138/AM18x based system"
42 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
43 select ARCH_DAVINCI_DA8XX
46 config ARCH_DAVINCI_DA8XX
50 config ARCH_DAVINCI_DM365
51 bool "DaVinci 365 based system"
53 select ARCH_DAVINCI_DMx
55 comment "DaVinci Board Type"
58 bool "Support DA8XX platforms using device tree"
60 depends on ARCH_DAVINCI_DA8XX
63 Say y here to include support for TI DaVinci DA850 based using
64 Flattened Device Tree. More information at Documentation/devicetree
66 config MACH_DAVINCI_EVM
68 default ARCH_DAVINCI_DM644x
69 depends on ARCH_DAVINCI_DM644x
73 Configure this option to specify the whether the board used
74 for development is a DM644x EVM
78 depends on ARCH_DAVINCI_DM644x
82 Say Y here to select the Lyrtech Small Form Factor
83 Software Defined Radio (SFFSDR) board.
85 config MACH_NEUROS_OSD2
86 bool "Neuros OSD2 Open Television Set Top Box"
87 depends on ARCH_DAVINCI_DM644x
89 Configure this option to specify the whether the board used
90 for development is a Neuros OSD2 Open Set Top Box.
92 config MACH_DAVINCI_DM355_EVM
94 default ARCH_DAVINCI_DM355
95 depends on ARCH_DAVINCI_DM355
97 Configure this option to specify the whether the board used
98 for development is a DM355 EVM
100 config MACH_DM355_LEOPARD
101 bool "DM355 Leopard board"
102 depends on ARCH_DAVINCI_DM355
104 Configure this option to specify the whether the board used
105 for development is a DM355 Leopard board.
107 config MACH_DAVINCI_DM6467_EVM
109 default ARCH_DAVINCI_DM646x
110 depends on ARCH_DAVINCI_DM646x
113 select MACH_DAVINCI_DM6467TEVM
115 Configure this option to specify the whether the board used
116 for development is a DM6467 EVM
118 config MACH_DAVINCI_DM6467TEVM
121 config MACH_DAVINCI_DM365_EVM
123 default ARCH_DAVINCI_DM365
124 depends on ARCH_DAVINCI_DM365
128 Configure this option to specify whether the board used
129 for development is a DM365 EVM
131 config MACH_DAVINCI_DA830_EVM
132 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
133 default ARCH_DAVINCI_DA830
134 depends on ARCH_DAVINCI_DA830
139 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
142 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
143 depends on MACH_DAVINCI_DA830_EVM
145 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
146 detected automatically based on successful probe of the I2C
147 based GPIO expander on that board. This option selected in this
148 menu has an effect only in case of a successful UI card detection.
153 Say Y here to use the LCD as a framebuffer or simple character
159 Say Y here to use the NAND flash. Do not forget to setup
160 the switch correctly.
163 config MACH_DAVINCI_DA850_EVM
164 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
165 default ARCH_DAVINCI_DA850
166 depends on ARCH_DAVINCI_DA850
168 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
171 prompt "Select peripherals connected to expander on UI board"
172 depends on MACH_DAVINCI_DA850_EVM
174 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
175 EVM is detected automatically based on successful probe of the I2C
176 based GPIO expander on that card. This option selected in this
177 menu has an effect only in case of a successful UI card detection.
180 bool "No peripheral is enabled"
182 Say Y if you do not want to enable any of the peripherals connected
183 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
186 bool "RMII Ethernet PHY"
188 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
189 EVM. This PHY is found on the UI daughter card that is supplied with
191 NOTE: Please take care while choosing this option, MII PHY will
192 not be functional if RMII mode is selected.
194 config DA850_UI_SD_VIDEO_PORT
195 bool "Video Port Interface"
197 Say Y if you want to use Video Port Interface (VPIF) on the
198 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
199 UI daughter card that is supplied with the EVM.
204 bool "AM18x wl1271 daughter board"
205 depends on MACH_DAVINCI_DA850_EVM
207 The wl1271 daughter card for AM18x EVMs is a combo wireless
208 connectivity add-on card, based on the LS Research TiWi module with
209 Texas Instruments' wl1271 solution.
210 Say Y if you want to use a wl1271 expansion card connected to the
214 config MACH_MITYOMAPL138
215 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
216 depends on ARCH_DAVINCI_DA850
220 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
221 System on Module. Information on this SoM may be found at
222 http://www.mitydsp.com
224 config MACH_OMAPL138_HAWKBOARD
225 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
226 depends on ARCH_DAVINCI_DA850
228 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
229 Information of this board may be found at
230 http://www.hawkboard.org/
233 bool "DAVINCI multiplexing support"
234 depends on ARCH_DAVINCI
237 Pin multiplexing support for DAVINCI boards. If your bootloader
238 sets the multiplexing correctly, say N. Otherwise, or if unsure,
241 config DAVINCI_MUX_DEBUG
242 bool "Multiplexing debug output"
243 depends on DAVINCI_MUX
245 Makes the multiplexing functions print out a lot of debug info.
246 This is useful if you want to find out the correct values of the
247 multiplexing registers.
249 config DAVINCI_MUX_WARNINGS
250 bool "Warn about pins the bootloader didn't set up"
251 depends on DAVINCI_MUX
253 Choose Y here to warn whenever driver initialization logic needs
254 to change the pin multiplexing setup. When there are no warnings
255 printed, it's safe to deselect DAVINCI_MUX for your product.
257 config DAVINCI_RESET_CLOCKS
258 bool "Reset unused clocks during boot"
259 depends on ARCH_DAVINCI
261 Say Y if you want to reset unused clocks during boot.
262 This option saves power, but assumes all drivers are
263 using the clock framework. Broken drivers that do not
264 yet use clock framework may not work with this option.
265 If you are booting from another operating system, you
266 probably do not want this option enabled until your
267 device drivers work properly.