arch/arm/mach-davinci/board-neuros-osd2.c

   1 /*
   2  * Neuros Technologies OSD2 board support
   3  *
   4  * Modified from original 644X-EVM board support.
   5  * 2008 (c) Neuros Technology, LLC.
   6  * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
   7  * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
   8  *
   9  * The Neuros OSD 2.0 is the hardware component of the Neuros Open
  10  * Internet Television Platform. Hardware is very close to TI
  11  * DM644X-EVM board. It has:
  12  *      DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
  13  *      USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
  14  *      Additionally realtime clock, IR remote control receiver,
  15  *      IR Blaster based on MSP430 (firmware although is different
  16  *      from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
  17  *      with PATA interface, two muxed red-green leds.
  18  *
  19  * For more information please refer to
  20  *              http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
  21  *
  22  * This file is licensed under the terms of the GNU General Public
  23  * License version 2. This program is licensed "as is" without any
  24  * warranty of any kind, whether express or implied.
  25  */
  26 #include <linux/platform_device.h>
  27 #include <linux/gpio.h>
  28 #include <linux/mtd/partitions.h>
  29
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32
  33 #include <mach/common.h>
  34 #include <mach/i2c.h>
  35 #include <mach/serial.h>
  36 #include <mach/mux.h>
  37 #include <mach/nand.h>
  38 #include <mach/mmc.h>
  39 #include <mach/usb.h>
  40
  41 #include "davinci.h"
  42
  43 #define NEUROS_OSD2_PHY_ID              "davinci_mdio-0:01"
  44 #define LXT971_PHY_ID                   0x001378e2
  45 #define LXT971_PHY_MASK                 0xfffffff0
  46
  47 #define NTOSD2_AUDIOSOC_I2C_ADDR        0x18
  48 #define NTOSD2_MSP430_I2C_ADDR          0x59
  49 #define NTOSD2_MSP430_IRQ               2
  50
  51 /* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
  52  * 2048 blocks in the device, 64 pages per block, 2048 bytes per
  53  * page.
  54  */
  55
  56 #define NAND_BLOCK_SIZE         SZ_128K
  57
  58 static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
  59         {
  60                 /* UBL (a few copies) plus U-Boot */
  61                 .name           = "bootloader",
  62                 .offset         = 0,
  63                 .size           = 15 * NAND_BLOCK_SIZE,
  64                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
  65         }, {
  66                 /* U-Boot environment */
  67                 .name           = "params",
  68                 .offset         = MTDPART_OFS_APPEND,
  69                 .size           = 1 * NAND_BLOCK_SIZE,
  70                 .mask_flags     = 0,
  71         }, {
  72                 /* Kernel */
  73                 .name           = "kernel",
  74                 .offset         = MTDPART_OFS_APPEND,
  75                 .size           = SZ_4M,
  76                 .mask_flags     = 0,
  77         }, {
  78                 /* File System */
  79                 .name           = "filesystem",
  80                 .offset         = MTDPART_OFS_APPEND,
  81                 .size           = MTDPART_SIZ_FULL,
  82                 .mask_flags     = 0,
  83         }
  84         /* A few blocks at end hold a flash Bad Block Table. */
  85 };
  86
  87 static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
  88         .parts          = davinci_ntosd2_nandflash_partition,
  89         .nr_parts       = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
  90         .ecc_mode       = NAND_ECC_HW,
  91         .bbt_options    = NAND_BBT_USE_FLASH,
  92 };
  93
  94 static struct resource davinci_ntosd2_nandflash_resource[] = {
  95         {
  96                 .start          = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
  97                 .end            = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
  98                 .flags          = IORESOURCE_MEM,
  99         }, {
 100                 .start          = DM644X_ASYNC_EMIF_CONTROL_BASE,
 101                 .end            = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 102                 .flags          = IORESOURCE_MEM,
 103         },
 104 };
 105
 106 static struct platform_device davinci_ntosd2_nandflash_device = {
 107         .name           = "davinci_nand",
 108         .id             = 0,
 109         .dev            = {
 110                 .platform_data  = &davinci_ntosd2_nandflash_data,
 111         },
 112         .num_resources  = ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
 113         .resource       = davinci_ntosd2_nandflash_resource,
 114 };
 115
 116 static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
 117
 118 static struct platform_device davinci_fb_device = {
 119         .name           = "davincifb",
 120         .id             = -1,
 121         .dev = {
 122                 .dma_mask               = &davinci_fb_dma_mask,
 123                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 124         },
 125         .num_resources = 0,
 126 };
 127
 128 static struct snd_platform_data dm644x_ntosd2_snd_data;
 129
 130 static struct gpio_led ntosd2_leds[] = {
 131         { .name = "led1_green", .gpio = GPIO(10), },
 132         { .name = "led1_red",   .gpio = GPIO(11), },
 133         { .name = "led2_green", .gpio = GPIO(12), },
 134         { .name = "led2_red",   .gpio = GPIO(13), },
 135 };
 136
 137 static struct gpio_led_platform_data ntosd2_leds_data = {
 138         .num_leds       = ARRAY_SIZE(ntosd2_leds),
 139         .leds           = ntosd2_leds,
 140 };
 141
 142 static struct platform_device ntosd2_leds_dev = {
 143         .name = "leds-gpio",
 144         .id   = -1,
 145         .dev = {
 146                 .platform_data          = &ntosd2_leds_data,
 147         },
 148 };
 149
 150
 151 static struct platform_device *davinci_ntosd2_devices[] __initdata = {
 152         &davinci_fb_device,
 153         &ntosd2_leds_dev,
 154 };
 155
 156 static struct davinci_uart_config uart_config __initdata = {
 157         .enabled_uarts = (1 << 0),
 158 };
 159
 160 static void __init davinci_ntosd2_map_io(void)
 161 {
 162         dm644x_init();
 163 }
 164
 165 /*
 166  I2C initialization
 167 */
 168 static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
 169         .bus_freq       = 20 /* kHz */,
 170         .bus_delay      = 100 /* usec */,
 171 };
 172
 173 static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
 174 };
 175
 176 static  int ntosd2_init_i2c(void)
 177 {
 178         int     status;
 179
 180         davinci_init_i2c(&ntosd2_i2c_pdata);
 181         status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
 182         if (status == 0) {
 183                 status = gpio_direction_input(NTOSD2_MSP430_IRQ);
 184                 if (status == 0) {
 185                         status = gpio_to_irq(NTOSD2_MSP430_IRQ);
 186                         if (status > 0) {
 187                                 ntosd2_i2c_info[0].irq = status;
 188                                 i2c_register_board_info(1,
 189                                         ntosd2_i2c_info,
 190                                         ARRAY_SIZE(ntosd2_i2c_info));
 191                         }
 192                 }
 193         }
 194         return status;
 195 }
 196
 197 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 198         .wires          = 4,
 199         .version        = MMC_CTLR_VERSION_1
 200 };
 201
 202
 203 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
 204         defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
 205 #define HAS_ATA 1
 206 #else
 207 #define HAS_ATA 0
 208 #endif
 209
 210 #if defined(CONFIG_MTD_NAND_DAVINCI) || \
 211         defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
 212 #define HAS_NAND 1
 213 #else
 214 #define HAS_NAND 0
 215 #endif
 216
 217 static __init void davinci_ntosd2_init(void)
 218 {
 219         struct clk *aemif_clk;
 220         struct davinci_soc_info *soc_info = &davinci_soc_info;
 221         int     status;
 222
 223         aemif_clk = clk_get(NULL, "aemif");
 224         clk_enable(aemif_clk);
 225
 226         if (HAS_ATA) {
 227                 if (HAS_NAND)
 228                         pr_warning("WARNING: both IDE and Flash are "
 229                                 "enabled, but they share AEMIF pins.\n"
 230                                 "\tDisable IDE for NAND/NOR support.\n");
 231                 davinci_init_ide();
 232         } else if (HAS_NAND) {
 233                 davinci_cfg_reg(DM644X_HPIEN_DISABLE);
 234                 davinci_cfg_reg(DM644X_ATAEN_DISABLE);
 235
 236                 /* only one device will be jumpered and detected */
 237                 if (HAS_NAND)
 238                         platform_device_register(
 239                                         &davinci_ntosd2_nandflash_device);
 240         }
 241
 242         platform_add_devices(davinci_ntosd2_devices,
 243                                 ARRAY_SIZE(davinci_ntosd2_devices));
 244
 245         /* Initialize I2C interface specific for this board */
 246         status = ntosd2_init_i2c();
 247         if (status < 0)
 248                 pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
 249                                                 "        %d\n", status);
 250
 251         davinci_serial_init(&uart_config);
 252         dm644x_init_asp(&dm644x_ntosd2_snd_data);
 253
 254         soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
 255
 256         davinci_setup_usb(1000, 8);
 257         /*
 258          * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
 259          * The AEAWx are five new AEAW pins that can be muxed by separately.
 260          * They are a bitmask for GPIO management. According TI
 261          * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
 262          * gpio(10,11,12,13) for leds any combination of bits works except
 263          * four last. So we are to reset all five.
 264          */
 265         davinci_cfg_reg(DM644X_AEAW0);
 266         davinci_cfg_reg(DM644X_AEAW1);
 267         davinci_cfg_reg(DM644X_AEAW2);
 268         davinci_cfg_reg(DM644X_AEAW3);
 269         davinci_cfg_reg(DM644X_AEAW4);
 270
 271         davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
 272 }
 273
 274 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 275         /* Maintainer: Neuros Technologies <neuros@groups.google.com> */
 276         .atag_offset    = 0x100,
 277         .map_io          = davinci_ntosd2_map_io,
 278         .init_irq       = davinci_irq_init,
 279         .timer          = &davinci_timer,
 280         .init_machine = davinci_ntosd2_init,
 281         .dma_zone_size  = SZ_128M,
 282         .restart        = davinci_restart,
 283 MACHINE_END