arch/arm/mach-exynos/mach-armlex4210.c

   1 /* linux/arch/arm/mach-exynos4/mach-armlex4210.c
   2  *
   3  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
   4  *              http://www.samsung.com
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9 */
  10
  11 #include <linux/gpio.h>
  12 #include <linux/io.h>
  13 #include <linux/mmc/host.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/serial_core.h>
  16 #include <linux/smsc911x.h>
  17
  18 #include <asm/mach/arch.h>
  19 #include <asm/mach-types.h>
  20
  21 #include <plat/cpu.h>
  22 #include <plat/devs.h>
  23 #include <plat/gpio-cfg.h>
  24 #include <plat/regs-serial.h>
  25 #include <plat/regs-srom.h>
  26 #include <plat/sdhci.h>
  27
  28 #include <mach/map.h>
  29
  30 #include "common.h"
  31
  32 /* Following are default values for UCON, ULCON and UFCON UART registers */
  33 #define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL |        \
  34                                  S3C2410_UCON_RXILEVEL |        \
  35                                  S3C2410_UCON_TXIRQMODE |       \
  36                                  S3C2410_UCON_RXIRQMODE |       \
  37                                  S3C2410_UCON_RXFIFO_TOI |      \
  38                                  S3C2443_UCON_RXERR_IRQEN)
  39
  40 #define ARMLEX4210_ULCON_DEFAULT        S3C2410_LCON_CS8
  41
  42 #define ARMLEX4210_UFCON_DEFAULT        (S3C2410_UFCON_FIFOMODE |       \
  43                                  S5PV210_UFCON_TXTRIG4 |        \
  44                                  S5PV210_UFCON_RXTRIG4)
  45
  46 static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
  47         [0] = {
  48                 .hwport         = 0,
  49                 .flags          = 0,
  50                 .ucon           = ARMLEX4210_UCON_DEFAULT,
  51                 .ulcon          = ARMLEX4210_ULCON_DEFAULT,
  52                 .ufcon          = ARMLEX4210_UFCON_DEFAULT,
  53         },
  54         [1] = {
  55                 .hwport         = 1,
  56                 .flags          = 0,
  57                 .ucon           = ARMLEX4210_UCON_DEFAULT,
  58                 .ulcon          = ARMLEX4210_ULCON_DEFAULT,
  59                 .ufcon          = ARMLEX4210_UFCON_DEFAULT,
  60         },
  61         [2] = {
  62                 .hwport         = 2,
  63                 .flags          = 0,
  64                 .ucon           = ARMLEX4210_UCON_DEFAULT,
  65                 .ulcon          = ARMLEX4210_ULCON_DEFAULT,
  66                 .ufcon          = ARMLEX4210_UFCON_DEFAULT,
  67         },
  68         [3] = {
  69                 .hwport         = 3,
  70                 .flags          = 0,
  71                 .ucon           = ARMLEX4210_UCON_DEFAULT,
  72                 .ulcon          = ARMLEX4210_ULCON_DEFAULT,
  73                 .ufcon          = ARMLEX4210_UFCON_DEFAULT,
  74         },
  75 };
  76
  77 static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
  78         .cd_type                = S3C_SDHCI_CD_PERMANENT,
  79         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
  80 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
  81         .max_width              = 8,
  82         .host_caps              = MMC_CAP_8_BIT_DATA,
  83 #endif
  84 };
  85
  86 static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
  87         .cd_type                = S3C_SDHCI_CD_GPIO,
  88         .ext_cd_gpio            = EXYNOS4_GPX2(5),
  89         .ext_cd_gpio_invert     = 1,
  90         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
  91         .max_width              = 4,
  92 };
  93
  94 static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
  95         .cd_type                = S3C_SDHCI_CD_PERMANENT,
  96         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
  97         .max_width              = 4,
  98 };
  99
 100 static void __init armlex4210_sdhci_init(void)
 101 {
 102         s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
 103         s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
 104         s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
 105 }
 106
 107 static void __init armlex4210_wlan_init(void)
 108 {
 109         /* enable */
 110         s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
 111         s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
 112
 113         /* reset */
 114         s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
 115         s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
 116
 117         /* wakeup */
 118         s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
 119         s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
 120 }
 121
 122 static struct resource armlex4210_smsc911x_resources[] = {
 123         [0] = {
 124                 .start  = EXYNOS4_PA_SROM_BANK(3),
 125                 .end    = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
 126                 .flags  = IORESOURCE_MEM,
 127         },
 128         [1] = {
 129                 .start  = IRQ_EINT(27),
 130                 .end    = IRQ_EINT(27),
 131                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 132         },
 133 };
 134
 135 static struct smsc911x_platform_config smsc9215_config = {
 136         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 137         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 138         .flags          = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
 139         .phy_interface  = PHY_INTERFACE_MODE_MII,
 140         .mac            = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
 141 };
 142
 143 static struct platform_device armlex4210_smsc911x = {
 144         .name           = "smsc911x",
 145         .id             = -1,
 146         .num_resources  = ARRAY_SIZE(armlex4210_smsc911x_resources),
 147         .resource       = armlex4210_smsc911x_resources,
 148         .dev            = {
 149                 .platform_data  = &smsc9215_config,
 150         },
 151 };
 152
 153 static struct platform_device *armlex4210_devices[] __initdata = {
 154         &s3c_device_hsmmc0,
 155         &s3c_device_hsmmc2,
 156         &s3c_device_hsmmc3,
 157         &s3c_device_rtc,
 158         &s3c_device_wdt,
 159         &exynos4_device_sysmmu,
 160         &samsung_asoc_dma,
 161         &armlex4210_smsc911x,
 162         &exynos4_device_ahci,
 163 };
 164
 165 static void __init armlex4210_smsc911x_init(void)
 166 {
 167         u32 cs1;
 168
 169         /* configure nCS1 width to 16 bits */
 170         cs1 = __raw_readl(S5P_SROM_BW) &
 171                 ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
 172         cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
 173                 (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
 174                 (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
 175                 (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
 176                 S5P_SROM_BW__NCS1__SHIFT;
 177         __raw_writel(cs1, S5P_SROM_BW);
 178
 179         /* set timing for nCS1 suitable for ethernet chip */
 180         __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
 181                      (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
 182                      (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
 183                      (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
 184                      (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
 185                      (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
 186                      (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 187 }
 188
 189 static void __init armlex4210_map_io(void)
 190 {
 191         exynos_init_io(NULL, 0);
 192         s3c24xx_init_clocks(24000000);
 193         s3c24xx_init_uarts(armlex4210_uartcfgs,
 194                            ARRAY_SIZE(armlex4210_uartcfgs));
 195 }
 196
 197 static void __init armlex4210_machine_init(void)
 198 {
 199         armlex4210_smsc911x_init();
 200
 201         armlex4210_sdhci_init();
 202
 203         armlex4210_wlan_init();
 204
 205         platform_add_devices(armlex4210_devices,
 206                              ARRAY_SIZE(armlex4210_devices));
 207 }
 208
 209 MACHINE_START(ARMLEX4210, "ARMLEX4210")
 210         /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
 211         .atag_offset    = 0x100,
 212         .init_irq       = exynos4_init_irq,
 213         .map_io         = armlex4210_map_io,
 214         .init_machine   = armlex4210_machine_init,
 215         .timer          = &exynos4_timer,
 216 MACHINE_END