2 * arch/arm/mach-kirkwood/openrd-setup.c
4 * Marvell OpenRD (Base|Client) Board Setup
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/mtd/nand.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/ata_platform.h>
17 #include <linux/mv643xx_eth.h>
18 #include <linux/i2c.h>
19 #include <asm/mach-types.h>
20 #include <asm/mach/arch.h>
21 #include <mach/kirkwood.h>
22 #include <plat/mvsdio.h>
26 static struct mtd_partition openrd_nand_parts[] = {
31 .mask_flags = MTD_WRITEABLE
34 .offset = MTDPART_OFS_NXTBLK,
38 .offset = MTDPART_OFS_NXTBLK,
39 .size = MTDPART_SIZ_FULL
43 static struct mv643xx_eth_platform_data openrd_ge00_data = {
44 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
47 static struct mv643xx_eth_platform_data openrd_ge01_data = {
48 .phy_addr = MV643XX_ETH_PHY_ADDR(24),
51 static struct mv_sata_platform_data openrd_sata_data = {
55 static struct mvsdio_platform_data openrd_mvsdio_data = {
56 .gpio_card_detect = 29, /* MPP29 used as SD card detect */
59 static unsigned int openrd_mpp_config[] __initdata = {
64 static struct i2c_board_info i2c_board_info[] __initdata = {
66 I2C_BOARD_INFO("cs42l51", 0x4a),
70 static void __init openrd_init(void)
73 * Basic setup. Needs to be called early.
76 kirkwood_mpp_conf(openrd_mpp_config);
78 kirkwood_uart0_init();
79 kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
83 kirkwood_ge00_init(&openrd_ge00_data);
84 if (machine_is_openrd_client())
85 kirkwood_ge01_init(&openrd_ge01_data);
86 kirkwood_sata_init(&openrd_sata_data);
87 kirkwood_sdio_init(&openrd_mvsdio_data);
91 if (machine_is_openrd_client()) {
92 i2c_register_board_info(0, i2c_board_info,
93 ARRAY_SIZE(i2c_board_info));
94 kirkwood_audio_init();
98 static int __init openrd_pci_init(void)
100 if (machine_is_openrd_base() || machine_is_openrd_client())
101 kirkwood_pcie_init();
105 subsys_initcall(openrd_pci_init);
107 #ifdef CONFIG_MACH_OPENRD_BASE
108 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
109 /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
110 .phys_io = KIRKWOOD_REGS_PHYS_BASE,
111 .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
112 .boot_params = 0x00000100,
113 .init_machine = openrd_init,
114 .map_io = kirkwood_map_io,
115 .init_irq = kirkwood_init_irq,
116 .timer = &kirkwood_timer,
120 #ifdef CONFIG_MACH_OPENRD_CLIENT
121 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
122 /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
123 .phys_io = KIRKWOOD_REGS_PHYS_BASE,
124 .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
125 .boot_params = 0x00000100,
126 .init_machine = openrd_init,
127 .map_io = kirkwood_map_io,
128 .init_irq = kirkwood_init_irq,
129 .timer = &kirkwood_timer,