2 * linux/arch/arm/mach-mmp/jasper.c
4 * Support for the Marvell Jasper Development Platform.
6 * Copyright (C) 2009-2010 Marvell International Ltd.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * publishhed by the Free Software Foundation.
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/platform_device.h>
17 #include <linux/regulator/machine.h>
18 #include <linux/regulator/max8649.h>
19 #include <linux/mfd/max8925.h>
20 #include <linux/interrupt.h>
22 #include <mach/irqs.h>
23 #include <asm/mach-types.h>
24 #include <asm/mach/arch.h>
25 #include <mach/addr-map.h>
26 #include <mach/mfp-mmp2.h>
27 #include <mach/mmp2.h>
31 #define JASPER_NR_IRQS (MMP_NR_IRQS + 48)
33 static unsigned long jasper_pin_config[] __initdata = {
69 PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
102 static struct regulator_consumer_supply max8649_supply[] = {
103 REGULATOR_SUPPLY("vcc_core", NULL),
106 static struct regulator_init_data max8649_init_data = {
108 .name = "vcc_core range",
113 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
115 .num_consumer_supplies = 1,
116 .consumer_supplies = &max8649_supply[0],
119 static struct max8649_platform_data jasper_max8649_info = {
120 .mode = 2, /* VID1 = 1, VID0 = 0 */
122 .ramp_timing = MAX8649_RAMP_32MV,
123 .regulator = &max8649_init_data,
126 static struct max8925_backlight_pdata jasper_backlight_data = {
130 static struct max8925_power_pdata jasper_power_data = {
131 .batt_detect = 0, /* can't detect battery by ID pin */
132 .topoff_threshold = MAX8925_TOPOFF_THR_10PER,
133 .fast_charge = MAX8925_FCHG_1000MA,
136 static struct max8925_platform_data jasper_max8925_info = {
137 .backlight = &jasper_backlight_data,
138 .power = &jasper_power_data,
139 .irq_base = MMP_NR_IRQS,
142 static struct i2c_board_info jasper_twsi1_info[] = {
146 .platform_data = &jasper_max8649_info,
151 .irq = IRQ_MMP2_PMIC,
152 .platform_data = &jasper_max8925_info,
156 static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
157 .clk_delay_cycles = 0x1f,
160 static void __init jasper_init(void)
162 mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
164 /* on-chip devices */
167 mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
168 mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
170 regulator_has_full_constraints();
173 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
174 .map_io = mmp_map_io,
175 .nr_irqs = JASPER_NR_IRQS,
176 .init_irq = mmp2_init_irq,
177 .timer = &mmp2_timer,
178 .init_machine = jasper_init,
179 .restart = mmp_restart,