]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/arm/mach-msm/board-qsd8x50.c
Merge tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
[karo-tx-linux.git] / arch / arm / mach-msm / board-qsd8x50.c
1 /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
2  *
3  * This program is free software; you can redistribute it and/or modify
4  * it under the terms of the GNU General Public License version 2 and
5  * only version 2 as published by the Free Software Foundation.
6  *
7  * This program is distributed in the hope that it will be useful,
8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
10  * GNU General Public License for more details.
11  *
12  * You should have received a copy of the GNU General Public License
13  * along with this program; if not, write to the Free Software
14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15  * 02110-1301, USA.
16  */
17 #include <linux/gpio.h>
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/platform_device.h>
21 #include <linux/delay.h>
22 #include <linux/usb/msm_hsusb.h>
23 #include <linux/err.h>
24 #include <linux/clkdev.h>
25 #include <linux/smc91x.h>
26
27 #include <asm/mach-types.h>
28 #include <asm/mach/arch.h>
29 #include <asm/io.h>
30 #include <asm/setup.h>
31
32 #include <mach/irqs.h>
33 #include <mach/sirc.h>
34 #include <mach/vreg.h>
35 #include <mach/clk.h>
36 #include <linux/platform_data/mmc-msm_sdcc.h>
37
38 #include "devices.h"
39 #include "common.h"
40
41 static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
42 static const unsigned        qsd8x50_surf_smc91x_gpio __initconst = 156;
43
44 /* Leave smc91x resources empty here, as we'll fill them in
45  * at run-time: they vary from board to board, and the true
46  * configuration won't be known until boot.
47  */
48 static struct resource smc91x_resources[] = {
49         [0] = {
50                 .flags = IORESOURCE_MEM,
51         },
52         [1] = {
53                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
54         },
55 };
56
57 static struct smc91x_platdata smc91x_platdata = {
58         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
59 };
60
61 static struct platform_device smc91x_device = {
62         .name           = "smc91x",
63         .id             = 0,
64         .num_resources  = ARRAY_SIZE(smc91x_resources),
65         .resource       = smc91x_resources,
66         .dev.platform_data = &smc91x_platdata,
67 };
68
69 static int __init msm_init_smc91x(void)
70 {
71         if (machine_is_qsd8x50_surf()) {
72                 smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
73                 smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff;
74                 smc91x_resources[1].start =
75                         gpio_to_irq(qsd8x50_surf_smc91x_gpio);
76                 smc91x_resources[1].end   =
77                         gpio_to_irq(qsd8x50_surf_smc91x_gpio);
78                 platform_device_register(&smc91x_device);
79         }
80
81         return 0;
82 }
83 module_init(msm_init_smc91x);
84
85 static int hsusb_phy_init_seq[] = {
86         0x08, 0x31,     /* Increase HS Driver Amplitude */
87         0x20, 0x32,     /* Enable and set Pre-Emphasis Depth to 10% */
88         -1
89 };
90
91 static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
92 {
93         int ret;
94
95         if (assert) {
96                 ret = clk_reset(link_clk, CLK_RESET_ASSERT);
97                 if (ret)
98                         pr_err("usb hs_clk assert failed\n");
99         } else {
100                 ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
101                 if (ret)
102                         pr_err("usb hs_clk deassert failed\n");
103         }
104         return ret;
105 }
106
107 static int hsusb_phy_clk_reset(struct clk *phy_clk)
108 {
109         int ret;
110
111         ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
112         if (ret) {
113                 pr_err("usb phy clk assert failed\n");
114                 return ret;
115         }
116         usleep_range(10000, 12000);
117         ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
118         if (ret)
119                 pr_err("usb phy clk deassert failed\n");
120         return ret;
121 }
122
123 static struct msm_otg_platform_data msm_otg_pdata = {
124         .phy_init_seq           = hsusb_phy_init_seq,
125         .mode                   = USB_DR_MODE_PERIPHERAL,
126         .otg_control            = OTG_PHY_CONTROL,
127         .link_clk_reset         = hsusb_link_clk_reset,
128         .phy_clk_reset          = hsusb_phy_clk_reset,
129 };
130
131 static struct platform_device *devices[] __initdata = {
132         &msm_clock_8x50,
133         &msm_device_gpio_8x50,
134         &msm_device_uart3,
135         &msm_device_smd,
136         &msm_device_otg,
137         &msm_device_hsusb,
138         &msm_device_hsusb_host,
139 };
140
141 static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
142         {51, "sdc1_dat_3"},
143         {52, "sdc1_dat_2"},
144         {53, "sdc1_dat_1"},
145         {54, "sdc1_dat_0"},
146         {55, "sdc1_cmd"},
147         {56, "sdc1_clk"}
148 };
149
150 static struct vreg *vreg_mmc;
151 static unsigned long vreg_sts;
152
153 static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
154 {
155         int rc = 0;
156         struct platform_device *pdev;
157
158         pdev = container_of(dv, struct platform_device, dev);
159
160         if (vdd == 0) {
161                 if (!vreg_sts)
162                         return 0;
163
164                 clear_bit(pdev->id, &vreg_sts);
165
166                 if (!vreg_sts) {
167                         rc = vreg_disable(vreg_mmc);
168                         if (rc)
169                                 pr_err("vreg_mmc disable failed for slot "
170                                                 "%d: %d\n", pdev->id, rc);
171                 }
172                 return 0;
173         }
174
175         if (!vreg_sts) {
176                 rc = vreg_set_level(vreg_mmc, 2900);
177                 if (rc)
178                         pr_err("vreg_mmc set level failed for slot %d: %d\n",
179                                         pdev->id, rc);
180                 rc = vreg_enable(vreg_mmc);
181                 if (rc)
182                         pr_err("vreg_mmc enable failed for slot %d: %d\n",
183                                         pdev->id, rc);
184         }
185         set_bit(pdev->id, &vreg_sts);
186         return 0;
187 }
188
189 static struct msm_mmc_gpio_data sdc1_gpio = {
190         .gpio = sdc1_gpio_cfg,
191         .size = ARRAY_SIZE(sdc1_gpio_cfg),
192 };
193
194 static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
195         .ocr_mask       = MMC_VDD_27_28 | MMC_VDD_28_29,
196         .translate_vdd  = msm_sdcc_setup_power,
197         .gpio_data = &sdc1_gpio,
198 };
199
200 static void __init qsd8x50_init_mmc(void)
201 {
202         vreg_mmc = vreg_get(NULL, "gp5");
203
204         if (IS_ERR(vreg_mmc)) {
205                 pr_err("vreg get for vreg_mmc failed (%ld)\n",
206                                 PTR_ERR(vreg_mmc));
207                 return;
208         }
209
210         msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
211 }
212
213 static void __init qsd8x50_map_io(void)
214 {
215         msm_map_qsd8x50_io();
216 }
217
218 static void __init qsd8x50_init_irq(void)
219 {
220         msm_init_irq();
221         msm_init_sirc();
222 }
223
224 static void __init qsd8x50_init(void)
225 {
226         msm_device_otg.dev.platform_data = &msm_otg_pdata;
227         msm_device_hsusb.dev.parent = &msm_device_otg.dev;
228         msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
229         platform_add_devices(devices, ARRAY_SIZE(devices));
230         qsd8x50_init_mmc();
231 }
232
233 static void __init qsd8x50_init_late(void)
234 {
235         smd_debugfs_init();
236 }
237
238 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
239         .atag_offset = 0x100,
240         .map_io = qsd8x50_map_io,
241         .init_irq = qsd8x50_init_irq,
242         .init_machine = qsd8x50_init,
243         .init_late = qsd8x50_init_late,
244         .init_time      = qsd8x50_timer_init,
245 MACHINE_END
246
247 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
248         .atag_offset = 0x100,
249         .map_io = qsd8x50_map_io,
250         .init_irq = qsd8x50_init_irq,
251         .init_machine = qsd8x50_init,
252         .init_late = qsd8x50_init_late,
253         .init_time      = qsd8x50_timer_init,
254 MACHINE_END