5 select ARCH_MXC_AUDMUX_V2
10 select ARCH_MXC_IOMUX_V3
11 select ARCH_MXC_AUDMUX_V2
14 comment "MX3 platforms:"
17 bool "Support MX31ADS platforms"
19 select IMX_HAVE_PLATFORM_IMX_I2C
20 select IMX_HAVE_PLATFORM_IMX_SSI
21 select IMX_HAVE_PLATFORM_IMX_UART
24 Include support for MX31ADS platform. This includes specific
25 configurations for the board and its peripherals.
27 config MACH_MX31ADS_WM1133_EV1
28 bool "Support Wolfson Microelectronics 1133-EV1 module"
29 depends on MACH_MX31ADS
30 depends on MFD_WM8350_I2C
31 depends on REGULATOR_WM8350
32 select MFD_WM8350_CONFIG_MODE_0
33 select MFD_WM8352_CONFIG_MODE_0
35 Include support for the Wolfson Microelectronics 1133-EV1 PMU
36 and audio module for the MX31ADS platform.
39 bool "Support Phytec pcm037 (i.MX31) platforms"
41 select IMX_HAVE_PLATFORM_IMX_I2C
42 select IMX_HAVE_PLATFORM_IMX_UART
43 select IMX_HAVE_PLATFORM_MXC_NAND
44 select MXC_ULPI if USB_ULPI
46 Include support for Phytec pcm037 platform. This includes
47 specific configurations for the board and its peripherals.
49 config MACH_PCM037_EET
50 bool "Support pcm037 EET board extensions"
51 depends on MACH_PCM037
52 select IMX_HAVE_PLATFORM_SPI_IMX
54 Add support for PCM037 EET baseboard extensions. If you are using the
55 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
56 command-line parameter.
59 bool "Support MX31 LITEKIT (LogicPD)"
61 select MXC_ULPI if USB_ULPI
62 select IMX_HAVE_PLATFORM_IMX_UART
63 select IMX_HAVE_PLATFORM_MXC_NAND
64 select IMX_HAVE_PLATFORM_SPI_IMX
66 Include support for MX31 LITEKIT platform. This includes specific
67 configurations for the board and its peripherals.
70 bool "Support MX31PDK (3DS)"
72 select MXC_DEBUG_BOARD
73 select IMX_HAVE_PLATFORM_IMX_UART
74 select IMX_HAVE_PLATFORM_MXC_NAND
75 select IMX_HAVE_PLATFORM_SPI_IMX
77 Include support for MX31PDK (3DS) platform. This includes specific
78 configurations for the board and its peripherals.
80 config MACH_MX31_3DS_MXC_NAND_USE_BBT
81 bool "Make the MXC NAND driver use the in flash Bad Block Table"
82 depends on MACH_MX31_3DS
83 depends on MTD_NAND_MXC
85 Enable this if you want that the MXC NAND driver uses the in flash
86 Bad Block Table to know what blocks are bad instead of scanning the
87 entire flash looking for bad block markers.
89 config MACH_MX31MOBOARD
90 bool "Support mx31moboard platforms (EPFL Mobots group)"
92 select IMX_HAVE_PLATFORM_IMX_I2C
93 select IMX_HAVE_PLATFORM_IMX_UART
94 select IMX_HAVE_PLATFORM_SPI_IMX
95 select MXC_ULPI if USB_ULPI
97 Include support for mx31moboard platform. This includes specific
98 configurations for the board and its peripherals.
100 config MACH_MX31LILLY
101 bool "Support MX31 LILLY-1131 platforms (INCO startec)"
103 select IMX_HAVE_PLATFORM_IMX_UART
104 select IMX_HAVE_PLATFORM_SPI_IMX
105 select MXC_ULPI if USB_ULPI
107 Include support for mx31 based LILLY1131 modules. This includes
108 specific configurations for the board and its peripherals.
111 bool "Support Dave/DENX QongEVB-LITE platform"
113 select IMX_HAVE_PLATFORM_IMX_UART
115 Include support for Dave/DENX QongEVB-LITE platform. This includes
116 specific configurations for the board and its peripherals.
119 bool "Support Phytec pcm043 (i.MX35) platforms"
121 select IMX_HAVE_PLATFORM_IMX_I2C
122 select IMX_HAVE_PLATFORM_IMX_SSI
123 select IMX_HAVE_PLATFORM_IMX_UART
124 select IMX_HAVE_PLATFORM_MXC_NAND
125 select IMX_HAVE_PLATFORM_FLEXCAN
126 select IMX_HAVE_PLATFORM_ESDHC
127 select MXC_ULPI if USB_ULPI
129 Include support for Phytec pcm043 platform. This includes
130 specific configurations for the board and its peripherals.
132 config MACH_ARMADILLO5X0
133 bool "Support Atmark Armadillo-500 Development Base Board"
135 select IMX_HAVE_PLATFORM_IMX_I2C
136 select IMX_HAVE_PLATFORM_IMX_UART
137 select IMX_HAVE_PLATFORM_MXC_NAND
138 select MXC_ULPI if USB_ULPI
140 Include support for Atmark Armadillo-500 platform. This includes
141 specific configurations for the board and its peripherals.
144 bool "Support MX35PDK platform"
146 select IMX_HAVE_PLATFORM_IMX_UART
147 select IMX_HAVE_PLATFORM_MXC_NAND
150 Include support for MX35PDK platform. This includes specific
151 configurations for the board and its peripherals.
153 config MACH_KZM_ARM11_01
154 bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
156 select IMX_HAVE_PLATFORM_IMX_UART
158 Include support for KZM-ARM11-01. This includes specific
159 configurations for the board and its peripherals.
161 config MACH_EUKREA_CPUIMX35
162 bool "Support Eukrea CPUIMX35 Platform"
164 select IMX_HAVE_PLATFORM_IMX_UART
165 select IMX_HAVE_PLATFORM_IMX_I2C
166 select IMX_HAVE_PLATFORM_MXC_NAND
167 select IMX_HAVE_PLATFORM_FLEXCAN
168 select IMX_HAVE_PLATFORM_ESDHC
169 select MXC_ULPI if USB_ULPI
171 Include support for Eukrea CPUIMX35 platform. This includes
172 specific configurations for the board and its peripherals.
176 depends on MACH_EUKREA_CPUIMX35
177 default MACH_EUKREA_MBIMXSD35_BASEBOARD
179 config MACH_EUKREA_MBIMXSD35_BASEBOARD
180 bool "Eukrea MBIMXSD development board"
181 select IMX_HAVE_PLATFORM_IMX_SSI
183 This adds board specific devices that can be found on Eukrea's
184 MBIMXSD evaluation board.