2 * linux/arch/arm/mach-omap1/board-h3.c
4 * This file contains OMAP1710 H3 specific code.
6 * Copyright (C) 2004 Texas Instruments, Inc.
7 * Copyright (C) 2002 MontaVista Software, Inc.
8 * Copyright (C) 2001 RidgeRun, Inc.
9 * Author: RidgeRun, Inc.
10 * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
17 #include <linux/types.h>
18 #include <linux/init.h>
19 #include <linux/major.h>
20 #include <linux/kernel.h>
21 #include <linux/platform_device.h>
22 #include <linux/errno.h>
23 #include <linux/workqueue.h>
24 #include <linux/i2c.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/nand.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/mtd/physmap.h>
29 #include <linux/input.h>
30 #include <linux/spi/spi.h>
31 #include <linux/i2c/tps65010.h>
32 #include <linux/smc91x.h>
34 #include <asm/setup.h>
36 #include <mach/hardware.h>
39 #include <asm/mach-types.h>
40 #include <asm/mach/arch.h>
41 #include <asm/mach/map.h>
43 #include <mach/irqs.h>
47 #include <plat/keypad.h>
49 #include <plat/common.h>
50 #include <plat/flash.h>
54 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
55 #define OMAP1710_ETHR_START 0x04000300
59 static const unsigned int h3_keymap[] = {
98 static struct mtd_partition nor_partitions[] = {
99 /* bootloader (U-Boot, etc) in first sector */
101 .name = "bootloader",
104 .mask_flags = MTD_WRITEABLE, /* force read-only */
106 /* bootloader params in the next sector */
109 .offset = MTDPART_OFS_APPEND,
116 .offset = MTDPART_OFS_APPEND,
122 .name = "filesystem",
123 .offset = MTDPART_OFS_APPEND,
124 .size = MTDPART_SIZ_FULL,
129 static struct physmap_flash_data nor_data = {
131 .set_vpp = omap1_set_vpp,
132 .parts = nor_partitions,
133 .nr_parts = ARRAY_SIZE(nor_partitions),
136 static struct resource nor_resource = {
137 /* This is on CS3, wherever it's mapped */
138 .flags = IORESOURCE_MEM,
141 static struct platform_device nor_device = {
142 .name = "physmap-flash",
145 .platform_data = &nor_data,
148 .resource = &nor_resource,
151 static struct mtd_partition nand_partitions[] = {
153 /* REVISIT: enable these partitions if you make NAND BOOT work */
158 .mask_flags = MTD_WRITEABLE, /* force read-only */
161 .name = "bootloader",
162 .offset = MTDPART_OFS_APPEND,
164 .mask_flags = MTD_WRITEABLE, /* force read-only */
168 .offset = MTDPART_OFS_APPEND,
173 .offset = MTDPART_OFS_APPEND,
178 .name = "filesystem",
179 .size = MTDPART_SIZ_FULL,
180 .offset = MTDPART_OFS_APPEND,
184 static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
186 struct nand_chip *this = mtd->priv;
189 if (cmd == NAND_CMD_NONE)
192 mask = (ctrl & NAND_CLE) ? 0x02 : 0;
195 writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
198 #define H3_NAND_RB_GPIO_PIN 10
200 static int nand_dev_ready(struct mtd_info *mtd)
202 return gpio_get_value(H3_NAND_RB_GPIO_PIN);
205 static const char *part_probes[] = { "cmdlinepart", NULL };
207 static struct platform_nand_data nand_platdata = {
211 .nr_partitions = ARRAY_SIZE(nand_partitions),
212 .partitions = nand_partitions,
213 .options = NAND_SAMSUNG_LP_OPTIONS,
214 .part_probe_types = part_probes,
217 .cmd_ctrl = nand_cmd_ctl,
218 .dev_ready = nand_dev_ready,
223 static struct resource nand_resource = {
224 .flags = IORESOURCE_MEM,
227 static struct platform_device nand_device = {
231 .platform_data = &nand_platdata,
234 .resource = &nand_resource,
237 static struct smc91x_platdata smc91x_info = {
238 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
239 .leda = RPC_LED_100_10,
240 .ledb = RPC_LED_TX_RX,
243 static struct resource smc91x_resources[] = {
245 .start = OMAP1710_ETHR_START, /* Physical */
246 .end = OMAP1710_ETHR_START + 0xf,
247 .flags = IORESOURCE_MEM,
250 .start = OMAP_GPIO_IRQ(40),
251 .end = OMAP_GPIO_IRQ(40),
252 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
256 static struct platform_device smc91x_device = {
260 .platform_data = &smc91x_info,
262 .num_resources = ARRAY_SIZE(smc91x_resources),
263 .resource = smc91x_resources,
266 static void __init h3_init_smc91x(void)
268 omap_cfg_reg(W15_1710_GPIO40);
269 if (gpio_request(40, "SMC91x irq") < 0) {
270 printk("Error requesting gpio 40 for smc91x irq\n");
275 #define GPTIMER_BASE 0xFFFB1400
276 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
277 #define GPTIMER_REGS_SIZE 0x46
279 static struct resource intlat_resources[] = {
281 .start = GPTIMER_REGS(0), /* Physical */
282 .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
283 .flags = IORESOURCE_MEM,
286 .start = INT_1610_GPTIMER1,
287 .end = INT_1610_GPTIMER1,
288 .flags = IORESOURCE_IRQ,
292 static struct platform_device intlat_device = {
293 .name = "omap_intlat",
295 .num_resources = ARRAY_SIZE(intlat_resources),
296 .resource = intlat_resources,
299 static struct resource h3_kp_resources[] = {
301 .start = INT_KEYBOARD,
303 .flags = IORESOURCE_IRQ,
307 static const struct matrix_keymap_data h3_keymap_data = {
309 .keymap_size = ARRAY_SIZE(h3_keymap),
312 static struct omap_kp_platform_data h3_kp_data = {
315 .keymap_data = &h3_keymap_data,
321 static struct platform_device h3_kp_device = {
322 .name = "omap-keypad",
325 .platform_data = &h3_kp_data,
327 .num_resources = ARRAY_SIZE(h3_kp_resources),
328 .resource = h3_kp_resources,
331 static struct platform_device h3_lcd_device = {
336 static struct spi_board_info h3_spi_board_info[] __initdata = {
338 .modalias = "tsc2101",
341 .irq = OMAP_GPIO_IRQ(H3_TS_GPIO),
342 .max_speed_hz = 16000000,
343 /* .platform_data = &tsc_platform_data, */
347 static struct platform_device *devices[] __initdata = {
356 static struct omap_usb_config h3_usb_config __initdata = {
357 /* usb1 has a Mini-AB port and external isp1301 transceiver */
360 #ifdef CONFIG_USB_GADGET_OMAP
361 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
362 #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
363 /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
364 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
370 static struct omap_lcd_config h3_lcd_config __initdata = {
371 .ctrl_name = "internal",
374 static struct omap_board_config_kernel h3_config[] __initdata = {
375 { OMAP_TAG_LCD, &h3_lcd_config },
378 static struct i2c_board_info __initdata h3_i2c_board_info[] = {
380 I2C_BOARD_INFO("tps65013", 0x48),
381 /* .irq = OMAP_GPIO_IRQ(??), */
384 I2C_BOARD_INFO("isp1301_omap", 0x2d),
385 .irq = OMAP_GPIO_IRQ(14),
389 static void __init h3_init(void)
393 /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
394 * to address 0 by a dip switch), NAND on CS2B. The NAND driver will
395 * notice whether a NAND chip is enabled at probe time.
397 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
398 * (which on H2 may be 16bit) on CS3. Try detecting that in code here,
399 * to avoid probing every possible flash configuration...
401 nor_resource.end = nor_resource.start = omap_cs3_phys();
402 nor_resource.end += SZ_32M - 1;
404 nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
405 nand_resource.end += SZ_4K - 1;
406 if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
408 gpio_direction_input(H3_NAND_RB_GPIO_PIN);
410 /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
411 /* GPIO10 pullup/down register, Enable pullup on GPIO10 */
412 omap_cfg_reg(V2_1710_GPIO10);
414 /* Mux pins for keypad */
415 omap_cfg_reg(F18_1610_KBC0);
416 omap_cfg_reg(D20_1610_KBC1);
417 omap_cfg_reg(D19_1610_KBC2);
418 omap_cfg_reg(E18_1610_KBC3);
419 omap_cfg_reg(C21_1610_KBC4);
420 omap_cfg_reg(G18_1610_KBR0);
421 omap_cfg_reg(F19_1610_KBR1);
422 omap_cfg_reg(H14_1610_KBR2);
423 omap_cfg_reg(E20_1610_KBR3);
424 omap_cfg_reg(E19_1610_KBR4);
425 omap_cfg_reg(N19_1610_KBR5);
427 platform_add_devices(devices, ARRAY_SIZE(devices));
428 spi_register_board_info(h3_spi_board_info,
429 ARRAY_SIZE(h3_spi_board_info));
430 omap_board_config = h3_config;
431 omap_board_config_size = ARRAY_SIZE(h3_config);
433 omap_register_i2c_bus(1, 100, h3_i2c_board_info,
434 ARRAY_SIZE(h3_i2c_board_info));
435 omap1_usb_init(&h3_usb_config);
439 static void __init h3_init_irq(void)
441 omap1_init_common_hw();
445 static void __init h3_map_io(void)
447 omap1_map_common_io();
450 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
451 /* Maintainer: Texas Instruments, Inc. */
452 .boot_params = 0x10000100,
454 .reserve = omap_reserve,
455 .init_irq = h3_init_irq,
456 .init_machine = h3_init,
457 .timer = &omap_timer,