2 * linux/arch/arm/mach-omap1/devices.c
4 * OMAP1 platform device setup/initialization
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
17 #include <linux/spi/spi.h>
19 #include <mach/hardware.h>
20 #include <asm/mach/map.h>
23 #include <plat/board.h>
25 #include <mach/gpio.h>
27 #include <plat/omap7xx.h>
29 /*-------------------------------------------------------------------------*/
31 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
33 #define OMAP_RTC_BASE 0xfffb4800
35 static struct resource rtc_resources[] = {
37 .start = OMAP_RTC_BASE,
38 .end = OMAP_RTC_BASE + 0x5f,
39 .flags = IORESOURCE_MEM,
42 .start = INT_RTC_TIMER,
43 .flags = IORESOURCE_IRQ,
46 .start = INT_RTC_ALARM,
47 .flags = IORESOURCE_IRQ,
51 static struct platform_device omap_rtc_device = {
54 .num_resources = ARRAY_SIZE(rtc_resources),
55 .resource = rtc_resources,
58 static void omap_init_rtc(void)
60 (void) platform_device_register(&omap_rtc_device);
63 static inline void omap_init_rtc(void) {}
66 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
68 #if defined(CONFIG_ARCH_OMAP15XX)
69 # define OMAP1_MBOX_SIZE 0x23
70 # define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1
71 #elif defined(CONFIG_ARCH_OMAP16XX)
72 # define OMAP1_MBOX_SIZE 0x2f
73 # define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1
76 static struct resource mbox_resources[] = {
78 .start = OMAP16XX_MAILBOX_BASE,
79 .end = OMAP16XX_MAILBOX_BASE + OMAP1_MBOX_SIZE,
80 .flags = IORESOURCE_MEM,
83 .start = INT_DSP_MAILBOX1,
84 .flags = IORESOURCE_IRQ,
89 static struct platform_device mbox_device = {
90 .name = "omap-mailbox",
92 .num_resources = ARRAY_SIZE(mbox_resources),
93 .resource = mbox_resources,
96 static inline void omap_init_mbox(void)
98 platform_device_register(&mbox_device);
101 static inline void omap_init_mbox(void) { }
104 /*-------------------------------------------------------------------------*/
106 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
108 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
111 if (controller_nr == 0) {
112 if (cpu_is_omap7xx()) {
113 omap_cfg_reg(MMC_7XX_CMD);
114 omap_cfg_reg(MMC_7XX_CLK);
115 omap_cfg_reg(MMC_7XX_DAT0);
117 omap_cfg_reg(MMC_CMD);
118 omap_cfg_reg(MMC_CLK);
119 omap_cfg_reg(MMC_DAT0);
122 if (cpu_is_omap1710()) {
123 omap_cfg_reg(M15_1710_MMC_CLKI);
124 omap_cfg_reg(P19_1710_MMC_CMDDIR);
125 omap_cfg_reg(P20_1710_MMC_DATDIR0);
127 if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
128 omap_cfg_reg(MMC_DAT1);
129 /* NOTE: DAT2 can be on W10 (here) or M15 */
130 if (!mmc_controller->slots[0].nomux)
131 omap_cfg_reg(MMC_DAT2);
132 omap_cfg_reg(MMC_DAT3);
136 /* Block 2 is on newer chips, and has many pinout options */
137 if (cpu_is_omap16xx() && controller_nr == 1) {
138 if (!mmc_controller->slots[1].nomux) {
139 omap_cfg_reg(Y8_1610_MMC2_CMD);
140 omap_cfg_reg(Y10_1610_MMC2_CLK);
141 omap_cfg_reg(R18_1610_MMC2_CLKIN);
142 omap_cfg_reg(W8_1610_MMC2_DAT0);
143 if (mmc_controller->slots[1].wires == 4) {
144 omap_cfg_reg(V8_1610_MMC2_DAT1);
145 omap_cfg_reg(W15_1610_MMC2_DAT2);
146 omap_cfg_reg(R10_1610_MMC2_DAT3);
149 /* These are needed for the level shifter */
150 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
151 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
152 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
155 /* Feedback clock must be set on OMAP-1710 MMC2 */
156 if (cpu_is_omap1710())
157 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
162 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
167 for (i = 0; i < nr_controllers; i++) {
168 unsigned long base, size;
169 unsigned int irq = 0;
174 omap1_mmc_mux(mmc_data[i], i);
178 base = OMAP1_MMC1_BASE;
182 if (!cpu_is_omap16xx())
184 base = OMAP1_MMC2_BASE;
190 size = OMAP1_MMC_SIZE;
192 omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
198 /*-------------------------------------------------------------------------*/
200 /* OMAP7xx SPI support */
201 #if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
203 struct platform_device omap_spi1 = {
204 .name = "omap1_spi100k",
208 struct platform_device omap_spi2 = {
209 .name = "omap1_spi100k",
213 static void omap_init_spi100k(void)
215 omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
216 if (omap_spi1.dev.platform_data)
217 platform_device_register(&omap_spi1);
219 omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
220 if (omap_spi2.dev.platform_data)
221 platform_device_register(&omap_spi2);
225 static inline void omap_init_spi100k(void)
230 /*-------------------------------------------------------------------------*/
232 #if defined(CONFIG_OMAP_STI)
234 #define OMAP1_STI_BASE 0xfffea000
235 #define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
237 static struct resource sti_resources[] = {
239 .start = OMAP1_STI_BASE,
240 .end = OMAP1_STI_BASE + SZ_1K - 1,
241 .flags = IORESOURCE_MEM,
244 .start = OMAP1_STI_CHANNEL_BASE,
245 .end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
246 .flags = IORESOURCE_MEM,
249 .start = INT_1610_STI,
250 .flags = IORESOURCE_IRQ,
254 static struct platform_device sti_device = {
257 .num_resources = ARRAY_SIZE(sti_resources),
258 .resource = sti_resources,
261 static inline void omap_init_sti(void)
263 platform_device_register(&sti_device);
266 static inline void omap_init_sti(void) {}
269 /*-------------------------------------------------------------------------*/
272 * This gets called after board-specific INIT_MACHINE, and initializes most
273 * on-chip peripherals accessible on this board (except for few like USB):
275 * (a) Does any "standard config" pin muxing needed. Board-specific
276 * code will have muxed GPIO pins and done "nonstandard" setup;
277 * that code could live in the boot loader.
278 * (b) Populating board-specific platform_data with the data drivers
279 * rely on to handle wiring variations.
280 * (c) Creating platform devices as meaningful on this board and
281 * with this kernel configuration.
283 * Claiming GPIOs, and setting their direction and initial values, is the
284 * responsibility of the device drivers. So is responding to probe().
286 * Board-specific knowlege like creating devices or pin setup is to be
287 * kept out of drivers as much as possible. In particular, pin setup
288 * may be handled by the boot loader, and drivers should expect it will
289 * normally have been done by the time they're probed.
291 static int __init omap1_init_devices(void)
293 /* please keep these calls, and their implementations above,
294 * in alphabetical order so they're easier to sort through.
304 arch_initcall(omap1_init_devices);