]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/arm/mach-omap2/board-3430sdp.c
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[karo-tx-linux.git] / arch / arm / mach-omap2 / board-3430sdp.c
1 /*
2  * linux/arch/arm/mach-omap2/board-3430sdp.c
3  *
4  * Copyright (C) 2007 Texas Instruments
5  *
6  * Modified from mach-omap2/board-generic.c
7  *
8  * Initial code: Syed Mohammed Khasim
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/input.h>
20 #include <linux/input/matrix_keypad.h>
21 #include <linux/spi/spi.h>
22 #include <linux/i2c/twl.h>
23 #include <linux/regulator/machine.h>
24 #include <linux/io.h>
25 #include <linux/gpio.h>
26 #include <linux/mmc/host.h>
27
28 #include <mach/hardware.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <asm/mach/map.h>
32
33 #include <plat/mcspi.h>
34 #include <plat/board.h>
35 #include <plat/usb.h>
36 #include "common.h"
37 #include <plat/dma.h>
38 #include <plat/gpmc.h>
39 #include <video/omapdss.h>
40 #include <video/omap-panel-tfp410.h>
41
42 #include <plat/gpmc-smc91x.h>
43
44 #include "board-flash.h"
45 #include "mux.h"
46 #include "sdram-qimonda-hyb18m512160af-6.h"
47 #include "hsmmc.h"
48 #include "pm.h"
49 #include "control.h"
50 #include "common-board-devices.h"
51
52 #define CONFIG_DISABLE_HFCLK 1
53
54 #define SDP3430_TS_GPIO_IRQ_SDPV1       3
55 #define SDP3430_TS_GPIO_IRQ_SDPV2       2
56
57 #define ENABLE_VAUX3_DEDICATED  0x03
58 #define ENABLE_VAUX3_DEV_GRP    0x20
59
60 #define TWL4030_MSECURE_GPIO 22
61
62 static uint32_t board_keymap[] = {
63         KEY(0, 0, KEY_LEFT),
64         KEY(0, 1, KEY_RIGHT),
65         KEY(0, 2, KEY_A),
66         KEY(0, 3, KEY_B),
67         KEY(0, 4, KEY_C),
68         KEY(1, 0, KEY_DOWN),
69         KEY(1, 1, KEY_UP),
70         KEY(1, 2, KEY_E),
71         KEY(1, 3, KEY_F),
72         KEY(1, 4, KEY_G),
73         KEY(2, 0, KEY_ENTER),
74         KEY(2, 1, KEY_I),
75         KEY(2, 2, KEY_J),
76         KEY(2, 3, KEY_K),
77         KEY(2, 4, KEY_3),
78         KEY(3, 0, KEY_M),
79         KEY(3, 1, KEY_N),
80         KEY(3, 2, KEY_O),
81         KEY(3, 3, KEY_P),
82         KEY(3, 4, KEY_Q),
83         KEY(4, 0, KEY_R),
84         KEY(4, 1, KEY_4),
85         KEY(4, 2, KEY_T),
86         KEY(4, 3, KEY_U),
87         KEY(4, 4, KEY_D),
88         KEY(5, 0, KEY_V),
89         KEY(5, 1, KEY_W),
90         KEY(5, 2, KEY_L),
91         KEY(5, 3, KEY_S),
92         KEY(5, 4, KEY_H),
93         0
94 };
95
96 static struct matrix_keymap_data board_map_data = {
97         .keymap                 = board_keymap,
98         .keymap_size            = ARRAY_SIZE(board_keymap),
99 };
100
101 static struct twl4030_keypad_data sdp3430_kp_data = {
102         .keymap_data    = &board_map_data,
103         .rows           = 5,
104         .cols           = 6,
105         .rep            = 1,
106 };
107
108 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO        8
109 #define SDP3430_LCD_PANEL_ENABLE_GPIO           5
110
111 static struct gpio sdp3430_dss_gpios[] __initdata = {
112         {SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
113         {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
114 };
115
116 static void __init sdp3430_display_init(void)
117 {
118         int r;
119
120         r = gpio_request_array(sdp3430_dss_gpios,
121                                ARRAY_SIZE(sdp3430_dss_gpios));
122         if (r)
123                 printk(KERN_ERR "failed to get LCD control GPIOs\n");
124
125 }
126
127 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
128 {
129         gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
130         gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
131
132         return 0;
133 }
134
135 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
136 {
137         gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
138         gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
139 }
140
141 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
142 {
143         return 0;
144 }
145
146 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
147 {
148 }
149
150
151 static struct omap_dss_device sdp3430_lcd_device = {
152         .name                   = "lcd",
153         .driver_name            = "sharp_ls_panel",
154         .type                   = OMAP_DISPLAY_TYPE_DPI,
155         .phy.dpi.data_lines     = 16,
156         .platform_enable        = sdp3430_panel_enable_lcd,
157         .platform_disable       = sdp3430_panel_disable_lcd,
158 };
159
160 static struct tfp410_platform_data dvi_panel = {
161         .power_down_gpio        = -1,
162 };
163
164 static struct omap_dss_device sdp3430_dvi_device = {
165         .name                   = "dvi",
166         .type                   = OMAP_DISPLAY_TYPE_DPI,
167         .driver_name            = "tfp410",
168         .data                   = &dvi_panel,
169         .phy.dpi.data_lines     = 24,
170 };
171
172 static struct omap_dss_device sdp3430_tv_device = {
173         .name                   = "tv",
174         .driver_name            = "venc",
175         .type                   = OMAP_DISPLAY_TYPE_VENC,
176         .phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
177         .platform_enable        = sdp3430_panel_enable_tv,
178         .platform_disable       = sdp3430_panel_disable_tv,
179 };
180
181
182 static struct omap_dss_device *sdp3430_dss_devices[] = {
183         &sdp3430_lcd_device,
184         &sdp3430_dvi_device,
185         &sdp3430_tv_device,
186 };
187
188 static struct omap_dss_board_info sdp3430_dss_data = {
189         .num_devices    = ARRAY_SIZE(sdp3430_dss_devices),
190         .devices        = sdp3430_dss_devices,
191         .default_device = &sdp3430_lcd_device,
192 };
193
194 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
195 };
196
197 static struct omap2_hsmmc_info mmc[] = {
198         {
199                 .mmc            = 1,
200                 /* 8 bits (default) requires S6.3 == ON,
201                  * so the SIM card isn't used; else 4 bits.
202                  */
203                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
204                 .gpio_wp        = 4,
205                 .deferred       = true,
206         },
207         {
208                 .mmc            = 2,
209                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
210                 .gpio_wp        = 7,
211                 .deferred       = true,
212         },
213         {}      /* Terminator */
214 };
215
216 static int sdp3430_twl_gpio_setup(struct device *dev,
217                 unsigned gpio, unsigned ngpio)
218 {
219         /* gpio + 0 is "mmc0_cd" (input/IRQ),
220          * gpio + 1 is "mmc1_cd" (input/IRQ)
221          */
222         mmc[0].gpio_cd = gpio + 0;
223         mmc[1].gpio_cd = gpio + 1;
224         omap_hsmmc_late_init(mmc);
225
226         /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
227         gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
228
229         /* gpio + 15 is "sub_lcd_nRST" (output) */
230         gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
231
232         return 0;
233 }
234
235 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
236         .gpio_base      = OMAP_MAX_GPIO_LINES,
237         .irq_base       = TWL4030_GPIO_IRQ_BASE,
238         .irq_end        = TWL4030_GPIO_IRQ_END,
239         .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
240                                 | BIT(16) | BIT(17),
241         .setup          = sdp3430_twl_gpio_setup,
242 };
243
244 /* regulator consumer mappings */
245
246 /* ads7846 on SPI */
247 static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
248         REGULATOR_SUPPLY("vcc", "spi1.0"),
249 };
250
251 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
252         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
253 };
254
255 static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
256         REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
257 };
258
259 static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
260         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
261 };
262
263 /*
264  * Apply all the fixed voltages since most versions of U-Boot
265  * don't bother with that initialization.
266  */
267
268 /* VAUX1 for mainboard (irda and sub-lcd) */
269 static struct regulator_init_data sdp3430_vaux1 = {
270         .constraints = {
271                 .min_uV                 = 2800000,
272                 .max_uV                 = 2800000,
273                 .apply_uV               = true,
274                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
275                                         | REGULATOR_MODE_STANDBY,
276                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
277                                         | REGULATOR_CHANGE_STATUS,
278         },
279 };
280
281 /* VAUX2 for camera module */
282 static struct regulator_init_data sdp3430_vaux2 = {
283         .constraints = {
284                 .min_uV                 = 2800000,
285                 .max_uV                 = 2800000,
286                 .apply_uV               = true,
287                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
288                                         | REGULATOR_MODE_STANDBY,
289                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
290                                         | REGULATOR_CHANGE_STATUS,
291         },
292 };
293
294 /* VAUX3 for LCD board */
295 static struct regulator_init_data sdp3430_vaux3 = {
296         .constraints = {
297                 .min_uV                 = 2800000,
298                 .max_uV                 = 2800000,
299                 .apply_uV               = true,
300                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
301                                         | REGULATOR_MODE_STANDBY,
302                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
303                                         | REGULATOR_CHANGE_STATUS,
304         },
305         .num_consumer_supplies          = ARRAY_SIZE(sdp3430_vaux3_supplies),
306         .consumer_supplies              = sdp3430_vaux3_supplies,
307 };
308
309 /* VAUX4 for OMAP VDD_CSI2 (camera) */
310 static struct regulator_init_data sdp3430_vaux4 = {
311         .constraints = {
312                 .min_uV                 = 1800000,
313                 .max_uV                 = 1800000,
314                 .apply_uV               = true,
315                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
316                                         | REGULATOR_MODE_STANDBY,
317                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
318                                         | REGULATOR_CHANGE_STATUS,
319         },
320 };
321
322 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
323 static struct regulator_init_data sdp3430_vmmc1 = {
324         .constraints = {
325                 .min_uV                 = 1850000,
326                 .max_uV                 = 3150000,
327                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
328                                         | REGULATOR_MODE_STANDBY,
329                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
330                                         | REGULATOR_CHANGE_MODE
331                                         | REGULATOR_CHANGE_STATUS,
332         },
333         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vmmc1_supplies),
334         .consumer_supplies      = sdp3430_vmmc1_supplies,
335 };
336
337 /* VMMC2 for MMC2 card */
338 static struct regulator_init_data sdp3430_vmmc2 = {
339         .constraints = {
340                 .min_uV                 = 1850000,
341                 .max_uV                 = 1850000,
342                 .apply_uV               = true,
343                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
344                                         | REGULATOR_MODE_STANDBY,
345                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
346                                         | REGULATOR_CHANGE_STATUS,
347         },
348         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vmmc2_supplies),
349         .consumer_supplies      = sdp3430_vmmc2_supplies,
350 };
351
352 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
353 static struct regulator_init_data sdp3430_vsim = {
354         .constraints = {
355                 .min_uV                 = 1800000,
356                 .max_uV                 = 3000000,
357                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
358                                         | REGULATOR_MODE_STANDBY,
359                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
360                                         | REGULATOR_CHANGE_MODE
361                                         | REGULATOR_CHANGE_STATUS,
362         },
363         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vsim_supplies),
364         .consumer_supplies      = sdp3430_vsim_supplies,
365 };
366
367 static struct twl4030_platform_data sdp3430_twldata = {
368         /* platform_data for children goes here */
369         .gpio           = &sdp3430_gpio_data,
370         .keypad         = &sdp3430_kp_data,
371
372         .vaux1          = &sdp3430_vaux1,
373         .vaux2          = &sdp3430_vaux2,
374         .vaux3          = &sdp3430_vaux3,
375         .vaux4          = &sdp3430_vaux4,
376         .vmmc1          = &sdp3430_vmmc1,
377         .vmmc2          = &sdp3430_vmmc2,
378         .vsim           = &sdp3430_vsim,
379 };
380
381 static int __init omap3430_i2c_init(void)
382 {
383         /* i2c1 for PMIC only */
384         omap3_pmic_get_config(&sdp3430_twldata,
385                         TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
386                         TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
387                         TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
388         sdp3430_twldata.vdac->constraints.apply_uV = true;
389         sdp3430_twldata.vpll2->constraints.apply_uV = true;
390         sdp3430_twldata.vpll2->constraints.name = "VDVI";
391
392         omap3_pmic_init("twl4030", &sdp3430_twldata);
393
394         /* i2c2 on camera connector (for sensor control) and optional isp1301 */
395         omap_register_i2c_bus(2, 400, NULL, 0);
396         /* i2c3 on display connector (for DVI, tfp410) */
397         omap_register_i2c_bus(3, 400, NULL, 0);
398         return 0;
399 }
400
401 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
402
403 static struct omap_smc91x_platform_data board_smc91x_data = {
404         .cs             = 3,
405         .flags          = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
406                                 IORESOURCE_IRQ_LOWLEVEL,
407 };
408
409 static void __init board_smc91x_init(void)
410 {
411         if (omap_rev() > OMAP3430_REV_ES1_0)
412                 board_smc91x_data.gpio_irq = 6;
413         else
414                 board_smc91x_data.gpio_irq = 29;
415
416         gpmc_smc91x_init(&board_smc91x_data);
417 }
418
419 #else
420
421 static inline void board_smc91x_init(void)
422 {
423 }
424
425 #endif
426
427 static void enable_board_wakeup_source(void)
428 {
429         /* T2 interrupt line (keypad) */
430         omap_mux_init_signal("sys_nirq",
431                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
432 }
433
434 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
435
436         .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
437         .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
438         .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
439
440         .phy_reset  = true,
441         .reset_gpio_port[0]  = 57,
442         .reset_gpio_port[1]  = 61,
443         .reset_gpio_port[2]  = -EINVAL
444 };
445
446 #ifdef CONFIG_OMAP_MUX
447 static struct omap_board_mux board_mux[] __initdata = {
448         { .reg_offset = OMAP_MUX_TERMINATOR },
449 };
450 #else
451 #define board_mux       NULL
452 #endif
453
454 /*
455  * SDP3430 V2 Board CS organization
456  * Different from SDP3430 V1. Now 4 switches used to specify CS
457  *
458  * See also the Switch S8 settings in the comments.
459  */
460 static char chip_sel_3430[][GPMC_CS_NUM] = {
461         {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
462         {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
463         {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
464 };
465
466 static struct mtd_partition sdp_nor_partitions[] = {
467         /* bootloader (U-Boot, etc) in first sector */
468         {
469                 .name           = "Bootloader-NOR",
470                 .offset         = 0,
471                 .size           = SZ_256K,
472                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
473         },
474         /* bootloader params in the next sector */
475         {
476                 .name           = "Params-NOR",
477                 .offset         = MTDPART_OFS_APPEND,
478                 .size           = SZ_256K,
479                 .mask_flags     = 0,
480         },
481         /* kernel */
482         {
483                 .name           = "Kernel-NOR",
484                 .offset         = MTDPART_OFS_APPEND,
485                 .size           = SZ_2M,
486                 .mask_flags     = 0
487         },
488         /* file system */
489         {
490                 .name           = "Filesystem-NOR",
491                 .offset         = MTDPART_OFS_APPEND,
492                 .size           = MTDPART_SIZ_FULL,
493                 .mask_flags     = 0
494         }
495 };
496
497 static struct mtd_partition sdp_onenand_partitions[] = {
498         {
499                 .name           = "X-Loader-OneNAND",
500                 .offset         = 0,
501                 .size           = 4 * (64 * 2048),
502                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
503         },
504         {
505                 .name           = "U-Boot-OneNAND",
506                 .offset         = MTDPART_OFS_APPEND,
507                 .size           = 2 * (64 * 2048),
508                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
509         },
510         {
511                 .name           = "U-Boot Environment-OneNAND",
512                 .offset         = MTDPART_OFS_APPEND,
513                 .size           = 1 * (64 * 2048),
514         },
515         {
516                 .name           = "Kernel-OneNAND",
517                 .offset         = MTDPART_OFS_APPEND,
518                 .size           = 16 * (64 * 2048),
519         },
520         {
521                 .name           = "File System-OneNAND",
522                 .offset         = MTDPART_OFS_APPEND,
523                 .size           = MTDPART_SIZ_FULL,
524         },
525 };
526
527 static struct mtd_partition sdp_nand_partitions[] = {
528         /* All the partition sizes are listed in terms of NAND block size */
529         {
530                 .name           = "X-Loader-NAND",
531                 .offset         = 0,
532                 .size           = 4 * (64 * 2048),
533                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
534         },
535         {
536                 .name           = "U-Boot-NAND",
537                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
538                 .size           = 10 * (64 * 2048),
539                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
540         },
541         {
542                 .name           = "Boot Env-NAND",
543
544                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
545                 .size           = 6 * (64 * 2048),
546         },
547         {
548                 .name           = "Kernel-NAND",
549                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x280000 */
550                 .size           = 40 * (64 * 2048),
551         },
552         {
553                 .name           = "File System - NAND",
554                 .size           = MTDPART_SIZ_FULL,
555                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x780000 */
556         },
557 };
558
559 static struct flash_partitions sdp_flash_partitions[] = {
560         {
561                 .parts = sdp_nor_partitions,
562                 .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
563         },
564         {
565                 .parts = sdp_onenand_partitions,
566                 .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
567         },
568         {
569                 .parts = sdp_nand_partitions,
570                 .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
571         },
572 };
573
574 static void __init omap_3430sdp_init(void)
575 {
576         int gpio_pendown;
577
578         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
579         omap_board_config = sdp3430_config;
580         omap_board_config_size = ARRAY_SIZE(sdp3430_config);
581         omap_hsmmc_init(mmc);
582         omap3430_i2c_init();
583         omap_display_init(&sdp3430_dss_data);
584         if (omap_rev() > OMAP3430_REV_ES1_0)
585                 gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
586         else
587                 gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
588         omap_ads7846_init(1, gpio_pendown, 310, NULL);
589         omap_serial_init();
590         omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
591         usb_musb_init(NULL);
592         board_smc91x_init();
593         board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
594         sdp3430_display_init();
595         enable_board_wakeup_source();
596         usbhs_init(&usbhs_bdata);
597 }
598
599 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
600         /* Maintainer: Syed Khasim - Texas Instruments Inc */
601         .atag_offset    = 0x100,
602         .reserve        = omap_reserve,
603         .map_io         = omap3_map_io,
604         .init_early     = omap3430_init_early,
605         .init_irq       = omap3_init_irq,
606         .handle_irq     = omap3_intc_handle_irq,
607         .init_machine   = omap_3430sdp_init,
608         .timer          = &omap3_timer,
609         .restart        = omap_prcm_restart,
610 MACHINE_END