2 * DPLL + CORE_CLK composite clock functions
4 * Copyright (C) 2005-2008 Texas Instruments, Inc.
5 * Copyright (C) 2004-2010 Nokia Corporation
8 * Richard Woodruff <r-woodruff2@ti.com>
11 * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
12 * Gordon McNutt and RidgeRun, Inc.
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
18 * XXX The DPLL and CORE clocks should be split into two separate clock
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/clk.h>
28 #include <plat/clock.h>
29 #include <plat/sram.h>
30 #include <plat/sdrc.h>
33 #include "clock2xxx.h"
36 #include "cm-regbits-24xx.h"
38 /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
41 * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
42 * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
44 * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
45 * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
46 * (the latter is unusual). This currently should be called with
47 * struct clk *dpll_ck, which is a composite clock of dpll_ck and
50 unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
55 core_clk = omap2_get_dpll_rate(clk);
57 v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
58 v &= OMAP24XX_CORE_CLK_SRC_MASK;
60 if (v == CORE_CLK_SRC_32K)
69 * Uses the current prcm set to tell if a rate is valid.
70 * You can go slower, but not faster within a given rate set.
72 static long omap2_dpllcore_round_rate(unsigned long target_rate)
74 u32 high, low, core_clk_src;
76 core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
77 core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
79 if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
80 high = curr_prcm_set->dpll_speed * 2;
81 low = curr_prcm_set->dpll_speed;
82 } else { /* DPLL clockout x 2 */
83 high = curr_prcm_set->dpll_speed;
84 low = curr_prcm_set->dpll_speed / 2;
87 #ifdef DOWN_VARIABLE_DPLL
88 if (target_rate > high)
93 if (target_rate > low)
101 unsigned long omap2_dpllcore_recalc(struct clk *clk)
103 return omap2xxx_clk_get_core_rate(clk);
106 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
108 u32 cur_rate, low, mult, div, valid_rate, done_rate;
110 struct prcm_config tmpset;
111 const struct dpll_data *dd;
113 cur_rate = omap2xxx_clk_get_core_rate(dclk);
114 mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
115 mult &= OMAP24XX_CORE_CLK_SRC_MASK;
117 if ((rate == (cur_rate / 2)) && (mult == 2)) {
118 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
119 } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
120 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
121 } else if (rate != cur_rate) {
122 valid_rate = omap2_dpllcore_round_rate(rate);
123 if (valid_rate != rate)
127 low = curr_prcm_set->dpll_speed;
129 low = curr_prcm_set->dpll_speed / 2;
135 tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
136 tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
138 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
139 tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
140 tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
142 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
143 mult = ((rate / 2) / 1000000);
144 done_rate = CORE_CLK_SRC_DPLL_X2;
146 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
147 mult = (rate / 1000000);
148 done_rate = CORE_CLK_SRC_DPLL;
150 tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
151 tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
154 tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
156 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
159 /* For omap2xxx_sdrc_init_params() */
160 omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
162 /* Force dll lock mode */
163 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
166 /* Errata: ret dll entry state */
167 omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
168 omap2xxx_sdrc_reprogram(done_rate, 0);